Sunteți pe pagina 1din 4

Copier Bulletin: TSB-1017 Rev.

11
Date: 08/18/2015
Page: 1 of 3

Models:

e-STUDIO Models

Subject:

Updated Recovery Jigs

Overview
Most recent models have recovery jigs used to restore system firmware when the USB update is
compromised. The recovery jigs are typically flashed with the initial firmware release of the MFP.
After restoring operation with the recovery jig, you bring the MFP to the current version with the
USB jig.
In some cases, we have updated the recovery jig from the initial firmware release to a later
version. The updated jigs are listed in this bulletin, along with the procedure to replace jigs in
your inventory when the jig has been updated.
This bulletin will be revised whenever a jig is updated.

Updated Jigs
The jigs below have been updated.
Model Series

Version

Part Number

Description

e-STUDIO166/206 Series

230

6LA41994CII

ES166/206 REC JIG

e-STUDIO167/207/237 Series

230

6LA41994CHII

ES167/237 REC JIG

e-STUDIO181/211 Series

100

6LA41994CJ3L

PWA-REC-JIG-ES181

e-STUDIO182/242 Series

100

6LA41994CJ3H

PWA-REC-JIG-ES242

e-STUDIO195/245 Series

130

6LH0993CJIV

ES195/245 SYS JIG

e-STUDIO2050C/2550C

SYS

2101

6LH092550SYS

SYSTEM FIRMWARE
E2050C/2550C

e-STUDIO2051C/2551C

SYS

2101

6LH092551SYS

SYSTEM FIRMWARE
E2051C/2551C

JIG 0

321

6LA419950D0

PWA-RECOVERY-JIG-D0

JIG 1

321

6LA419950D1

PWA-RECOVERY-JIG-D1

e-STUDIO282/283 Series

321

6LA419940R2

E202L/232/282203L/233/283

e-STUDIO287/407CS Series

2227

6LH099407CS

ES287/407CS SYS JIG

JIG 0

310

6LA419950K0

PWA-RECOVERY-JIG-K0

JIG 1

310

6LA419950K1

PWA-RECOVERY-JIG-K1

321

6LA419940H2

E352/452/353/453 SYS

313

6LA41994MSH

SYS RECOVERY-JIG

e-STUDIO281c/351c/451c

e-STUDIO3510C Series
e-STUDIO452/453 Series
e-STUDIO4520c Series

SYS

Copyright-2015 Toshiba America Business Solutions, Inc. (TABS). This publication contains proprietary and confidential
information retained for reference purpose by authorized TABS dealers. Unauthorized use of this information is prohibited.
TABS makes no express or implied warranty, including implied warranties of merchantability for a particular purpose, with regard
to this technical publication and disclaims any claim arising by reason of the possession or use thereof.

MAIN

21

6LA4MAINMSH

REC JIG - ENGINE ROM

SYS

4001

6LA41994MSHX

SYS RECOVERY-JIG

MAIN

15

6LA4MNMSHX

REC JIG - ENGINE (MAIN)

SYS

313

6LA41994LRSE

RECOVERY-JIG (Old CCD)

SYS

318

6LA4SCN2LRS

RECOVERY-JIG (New CCD)

MAIN

20

6LA41994LRM

RECOVERY-JIG (MAIN)

SYS

2000

6LH0993X456S

SYS REC JIG E456

MAIN

12

6LH099MN456

MAIN REC JIG E456

SYS

1201

6LH09SYS507

SYS REC JIG E507

MAIN

05

6LH099MN457

MAIN REC JIG E457

2027

6LH099527SYS

SYS RECOVERY-JIG

SYS

2000

6LH099SYS506

SYS REC JIG E506

MAIN

52

6LH099MN506

MAIN REC JIG E506

SYS

1201

6LH09SYS507

SYS REC JIG E507

MAIN

05

6LH099MN507

MAIN REC JIG E507

e-STUDIO850/853 Series

328

6LA4199500R

PWA-RECOVERY-JIG-RG

e-STUDIO855/855SE Series

313

6LA41994ALSE

SYS RECOVERY-JIG

e-STUDIO856 Series

1501

6LH1882X856S

SYS REC JIG E856

e-STUDIO857 Series

1201

6LH09SYS857

SYS REC JIG E857

e-STUDIO5055C Series

2101

6LH095055SYS

SYS RECOVERY-JIG

SYS

313

6LA41994BPS

SYS RECOVERY-JIG

MAIN

25

6LA41994BPM

REC-JIG-ENGINE (MAIN)

PFC

10

6LA4199BPPFC

REC-JIG-PFC

SYS

3111

6LA41994BPSX

SYS RECOVERY-JIG E6550C

MAIN

11

6LA4MAINBPX

REC JIG - ENGINE (MAIN)

SYS

1102

6LH18BPSEX2

SYS RECOVERY-JIG E6570C

MAIN

02

6LH1MNBPEX2

REC JIG - ENGINE (MAIN)

e-STUDIO4540c Series
e-STUDIO455/455SE
Series
e-STUDIO456 Series
(excluding e-STUDIO506)
e-STUDIO507 Series
(excluding e-STUDIO507)
e-STUDIO477S/527S
e-STUDIO506
e-STUDIO507

e-STUDIO5520/6530C
Series

e-STUDIO6550C Series

e-STUDIO6570C Series

Recovery jigs are routinely update with newer firmware versions. This does not mean
previous versions of the jigs must be replaced. Firmware upgrades are common and are
normally accomplished using a USB drive. In fact, the firmware on the recovery jig will never be
the current production level and you will still have to upgrade the machine firmware with a USB
drive after using the jig. You will be informed by TSB if a newer jig is required.
If you have any of the jigs listed above with earlier firmware, you can return the old jig for credit
after ordering a current jig. Please note that this is an option. Updating your jigs is not required.
However, if you wish to update your jigs, return them using the procedure described below

How to Get an Updated Jig


To get an updated jig, order the part number in the normal way on FYI and return your original jig
for credit.
To Return Your Old Jig
Place the jig in an antistatic bag, and put it in the box that originally contained it. That original box
should be shipped inside a suitable shipping box.
The shipping box should also include the invoice for the new jig, your account number, contact
name and phone number. Ship this box to:
Toshiba America Business Solutions, Inc.
9740 Irvine Blvd.
Irvine, CA 92618
Attention: Aftermarket (Recovery Jig Return)

END

Revision History:
12/17/2010 Original release
12/14/2011 Rev. 01: Added EBX models and updated list
8/15/2012 -- Rev.02: Modified return address to 9740
9/5/2012 -- Rev. 03: Added 4540c/6550c Main
4/1/3012 Rev. 04: Removed PFC rom from eS856
5/1/2013 Rev 05: Added e-STUDIO195/245 and e-STUDIO 287/407CS, updated several part
numbers
9/30/2013 Rev 06: Added eS477S/527S and eS5055C Series
12/31/2013 Rev. 07: Changed part number for the eS456 Main Recovery Jig
7/3/2014 Rev. 08: Added eS457, eS507, eS857 and eS6570C Series
7/11/14 Rev. 09: Updated part numbers for the eS2505C/2051C, 507 Series and versions of
the 4540C and 5055C machines
7/15/14 Rev. 10: Updated version numbers for the eS2505C/2051C, 407C, 4540, 456, and
5055C series
8/18/15 Rev. 11: Updated base version numbers for the eS2505C/2051C, 507, 857 and 5055C
series

S-ar putea să vă placă și