Sunteți pe pagina 1din 54

Cat Advanced High

Efficiency Engine Oil Filters

Improved Filtration for a


Cleaner Engine
Cat Advanced High Efficiency Engine Oil Filters increase contamination control
performance providing for a much cleaner running engine lubrication system.
Cat Advanced Oil Filters provide enhanced filtration without the shorter change
intervals often required by other brands higher efficiency filters.
The Cat 1R-1807 and 1R-1808 filters contain an improved, higher efficiency filter media.
This media is designed to increase contaminant capturing efficiency while maintaining
excellent dirt holding capacity characteristics.
The Cat 1R-1807 and 1R-1808 filters offer better filtration efficiency than standard oil
filters, improved engine cleanliness and a longer component life.

Cat Advanced High Efficiency Engine Oil Filters


An Option for Improved Engine Oil Filtration
The Cat Advanced Oil Filters are now installed on new engines in production. They are
also the approved upgrade option for Cat engine models that use the 1R-0739 and 1R-0716
Standard Efficiency Engine Oil Filters.
Cross Reference
Cat Standard Efficiency
Engine Oil Filter
1R-0739
1R-0716

Consistent Quality from


Filter to Filter
Caterpillar engineers its liquid filters
to avoid metal contaminants, leaks,
pleat bunching and movement. Cat
liquid filters have:

Cat Advanced High Efficiency


Engine Oil Filter
1R-1807
1R-1808

3
1
2

Improved Filtration
for Less Wear

1R-1807 Efficiency Performance

Multipass Efficiency (%)

120
100
80
1R-1807
1R-0739

60
40
20
0
0 2

8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
Particle Size (Microns)

1R-1808 Efficiency Performance


120
Multipass Efficiency (%)

To increase contamination
control capability, the Cat
Advanced Oil Filter combines
improved filtration efficiency,
excellent contaminant
holding capacity and low
pressure drop characteristics.
The graphs to the right
demonstrate in blue the
improved filtration efficiency
the 1R-1807 and 1R-1808 filters
offer over the corresponding
standard efficiency filters.
The result is less wear on oil
lubricated engine parts.

100

Caterpillar manufactures over


80 percent of its liquid filter volume
on an automated assembly line.
This strict quality control eliminates
variation from part to part.

80
1R-1808
1R-0716

60

1) Spiral roving and beading for


pleat stability to better trap and
hold particles
2) Properly cured filter media for
long performance and life
3) One-piece aluminum base plate
4) Strong nylon center tubes to
prevent metal contamination
5) A heavy gauge canister for
structural strength
6) One-piece molded urethane end
caps to eliminate leaks

40
20
0
0 2

8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
Particle Size (Microns)

For more information, visit us on the


Web at www.cat.com

Negligible Impact on Contaminant Holding Capacity

CLASS PRODUCT SUPPORT.


We offer you the right parts and service
solutions, when and where you need them.
The Cat Dealer network of highly trained
experts keeps your entire fleet up and running
to maximize your equipment investment.

The Cat Advanced Oil Filter provides improved filtration efficiency with little effect
on dirt holding capacity. Therefore, the condition of the oil as determined by SOSSM
Services Analysis, and not filter capacity,
Caterpillar Advanced High Efficiency Oil Filter
Dirt Holding Capacity Performance
is the major factor in determining the
200
recommended oil change interval.
180
The bar graph to the left illustrates
160
140
the relative dirt holding capacity of the
120
Advanced Filters and corresponding
100
80
Standard Efficiency Filters.
Retained Capacity (grams)

CAT DEALERS DEFINE WORLD-

60
40
20
0

1R-1807

1R-0739

1R-1808

1R-0716

Improved efficiency with minimal loss in reserve capacity


and no impact on recommended change interval.

PEHJ0068-02
www.cat.com
2007 Caterpillar All Rights Reserved Printed in USA
CAT, CATERPILLAR, their respective logos, Caterpillar Yellow and the POWER EDGE trade dress, as well as
corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

Cat Fuel Water Separators and


PrimeTime Priming Pumps

for Cat XT Hose

Protect your fuel system


Advanced High Efficiency Fuel Water Separator
Diesel fuel acts as a lubricant in unit injectors. The film strength of diesel fuel prevents
metal-to-metal contact between the plunger and barrel. Water can compromise film
strength, resulting in scuffing and eventual seizure. Cat Fuel Water Separators have
greater water removal capabilities essential for better protection of unit injectors. Fuel
Water Separators also deliver longer secondary fuel filter life.

PrimeTime Priming Pump


Cat PrimeTime Priming Pumps are easily installed on the frame or engine
as retrofits. They prime the filter and fuel system with a flip of the switch.

While these two products are available separately, you will get the best results when
they are used together.

Cat Fuel Water Separators and PrimeTime Priming Pumps


Extend the life of unit fuel
injectors

Retrofit Information


upgrade the durability and water removal performance over previous Caterpillar offerings
and other brands.

for additional capacity

Water removal efficiency*

97%

Fuel Water** Separator


Basic Configuration

caused metal-to-metal contact between the


plunger and barrel in the fuel injector on the
left. A Cat Fuel Water Separator protected the
injector on the right, preventing damage and

Fuel Water** Separator


Basic Configuration

PrimeTime Pump
Prime Only Configuration

Engine

Hand Priming
Configuration

PERCENT EFFICIENCY

PrimeTime Pump
Full Flow Configuration

Engine

Model Specific Electric Priming Pump Kits:

Model

Part No.

87%

81%
58%

est 2

Caterpillar

56%
45%

est 2

est 2

Racor

Stanadyne

Cat Fuel Water Separators are much more


efficient than those produced by other
manufacturers. This efficiency minimizes
barrel-to-plunger scuffing and significantly
reduces the chance
of fuel injector failure.

and underground mining, a metal collection


bowl is

to represent the parts actually tested. Caterpillar implies


nothing further, and no one should infer that these parts

Easy to Install Pump


Electric priming pump

CAT DEALERS DEFINE WORLDCLASS PRODUCT SUPPORT.

Resilient mounting

We offer you the right parts and service

Primary fuel filter


solutions, when and where you need them.

investment.

Reusable water collection bowl has capacity

drains in less than one minute.

www.cat.com

Water separator removes virtually all free

fuel.

Fuel Contamination Control

Contamination Control Enhances


Performance
Contamination control is increasingly important for maximizing performance and service
life in fuel systems. Some Cat fuel systems exceed pressures of 30,000 psi in order to
deliver more horsepower, better fuel economy and fewer emissions. This necessitates
tolerances smaller than five microns between parts. These tolerances and injection
pressures make fuel systems more vulnerable to wear and abrasion.

damage, eroding orifices and resulting in incomplete atomization of fuel and overfueling.
This harms performance and fuel economy. Contaminants also result in hard starts and
increased emissions. Larger contaminants can actually clog orifices.

and eventual injector seizure.

mating parts of the valves. This excessive wear causes leaks and eventual loss of
engine power.

Fuel Contamination Control


Human hair
(80 microns)
Advanced High Efficiency
(4 microns)

Damages fuel
systems
(5-10 microns)

Standard efficiency
(15 microns)

Sources of Contamination

In the Fuel

during storage or transportation of fuel.

and periodic sampling and testing

Filtering Contamination



correct part number for your application. Most applications

solutions, when and where you need them.

investment.

www.cat.com

and to prevent metal contamination

CLASS PRODUCT SUPPORT.

Measuring Contamination
Contamination is measured by counting
particles and reported by comparing those

refers to the number of particles in three


different size categories contained in a

refers to the number of particles that

number refers to particles that are greater



microns.



contamination level is allowed to rise one

size will double.


Other brands
of filters

Cat filters


maintain pleat stability and spacing to
better trap and hold contaminants

CAT DEALERS DEFINE WORLD

use exclusively designed filtration media


C10, C12

filters.

During Operation

can be drawn into your fuel tank through

dust when it is not properly sealed.


External

during maintenance and service, even


when changing filters.

Size of Contamination



millionth of a meter. To give you an idea of
how small that is, an average human hair

how even small contaminants can



corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

98% efficiency

50% efficiency

s = 4 micron particle

Cat Hydraulic & Power


Train Filters

Three Filter Choices To Lower


Contamination
The key to extending hydraulic and power train component life is to reduce contamination.
Choosing the correct Cat filter is essential in minimizing damage to components from abrasives.
You should consult your Cat Dealer to determine which Cat Hydraulic and Power Train Filters are
available to meet the specific cleanliness needs in your applications.
Standard Efficiency Filtermedia is designed to maintain system cleanliness in most general
and light duty applications.
Advanced High Efficiency Filterprotects systems against accelerated wear with a special
filter media to provide greater protection in moderate to severe conditions.
Ultra High Efficiency (UHE) Filterfeatures a super-fine synthetic media removes a higher
proportion of fine particles for optimum contamination control in moderate and severe
applications. Also for use as a clean out filter for 250 hours after any maintenance, rebuild
or debris invasion.
With tighter tolerances in todays components, it is very important to properly address
cleanliness levels. Caterpillar engineers the best protection into all Cat filters, resulting in higher
efficiency filtration, longer system life, greater reliability and improved machine productivity.

Cat Hydraulic & Power Train Filters

100

Determine the Best Level of Filtration


Any filter must meet the specifications required for the

60

system it is on. Filter efficiency and capacity must be


40

matched to both the system and the change interval. As

20

a result, the Cat Standard Efficiency Filter is not always


the recommended filter for every hydraulic and power

Efficiency %

80

train system. Some newer machine models, like large

10

15

20

25

30

35

40

45

track-type tractors, require Cat Advanced or UHE Filters

Micron Size

instead of the Standard Filter for superior protection and


maximum system life and performance.

UHE
Advanced

To upgrade filtration performance, the first step is to


check the Parts Identification Manual for the

Standard

recommended filter part number and change interval.


If the recommended filter is a Cat Advanced Filter, then
you should never use a Standard Filter. Likewise, if the
recommendation is for a Cat UHE Filter, you should never
use a Standard or Advanced Filter in its place. You are
able to substitute a higher-efficiency filter, but never
substitute a lower-efficiency filter for the recommended
filter.

Quality Filters, Consistently


All filters should be evaluated not only on the basis of
quality, but also consistency. The challenge isn't to make
one quality filter, but to manufacture quality filters each
and every time. Cat Filters are manufactured in a highly
automated process. Strict quality control and automation
together virtually eliminate filter-to-filter variation.
Select filters based on three criteriaquality, consistency
and on-machine performance. This provides the most
cost-effective hydraulic and power train filtration.

Cat Hydraulic & Power Train Filters

Caterpillar offers the best selection of Hydraulic and Power Train Filters to cover your entire fleet of Cat
Equipment.
Hydraulic & Power Train Cartridge Filter Cross Reference

Hydraulic & Power Train Spin-On Filter Cross Reference

Filter
Size

Standard
Efficiency

Advanced
Efficiency

UHE

Fire
Resistant

Filter
Size

1X4
2X3
2X4
2X8
2X8
2X8
2X9
2 X 10
3X4
3X4
3X5
3X5
3X5
3X5
3X6
3X6
3X8
3X8
3X8
3X8
3X9
3X9
3 X 13
3 X 17
4X6
4X7
4X7
4X7
4X8
4X8
4X8
4X8
4X8
4X8
4X9
*4 X 9
4X9
4X9
4X9
4X9
4 X 11
4 X 11
4 X 16
4 X 16 R*
4 X 16
4 X 26
5X5
5X6
5 X 7 R*
5X9
5X9
5 X 10.5
5 X 11 R*
5 X 24
5.5 X 24
6 X 12
**6 X 16
6 X 18
7X9
7 x 9 R*
10 X 22

109-7293
094-1053
109-7289
7F-7238
1G-5459
123-8999
9U-5871
8T-7479
5J-8879
081-4169
9J-6472
2U-6391
094-4421
180-0850
081-2634
N/A
9T-9054
N/A
134-0964
185-1379
8H-0847
N/A
1Q-1688
159-2967
9C-8668
077-3250
077-2825
032-9868
123-2873
2C-8410
092-2568
143-2849
159-1427
159-1428
1R-0719
077-5479
054-1719
086-3940
078-0651
081-3540
N/A
093-5369
163-4032
7R-8234
077-3569
6E-5216
6J-0363
5J-8877
1R-0735
1R-0741
9G-6420
N/A
1R-0722
N/A
N/A
094-3229
126-2081
094-4412
1R-0732
N/A
185-1375

N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
1R-0773
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
1R-0777
1R-0778
N/A
N/A
1R-0774
109-7287
137-7249
N/A
179-9806
N/A
1R-0792
249-2337
192-1560

N/A
N/A
N/A
N/A
N/A
117-9900
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
280-7424
9T-7656
7R-4568
4C-6860
185-1378
N/A
8T-3815
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
132-8875
077-5479
N/A
N/A
N/A
N/A
146-9290
N/A
N/A
N/A
N/A
N/A
N/A
N/A
139-1537
132-8876
N/A
1R-1809
139-1536
N/A
N/A
139-1539
126-2131
139-1540
167-2009
243-3758
N/A

N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
4T-3131
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
104-6931
4T-3132
N/A
N/A
4T-3134
N/A
N/A
N/A
N/A
N/A
4T-3133
N/A
N/A

Standard
Efficiency

3X5
119-4740
3X6
4I-3948
3X6
N/A
3X9
N/A
3X9
N/A
3X9
N/A
4X6
090-2900
4X6
123-8189
4X6
4T-6915
4X6
139-4359
4X7
N/A
4X7
161-4741
4X8
N/A
4X8
N/A
4X9
N/A
4X9
N/A
4 X 10
8C-0292
5 X 7*
N/A
5 X 7**
N/A
5 X 7***
N/A
5X8
N/A
5X8
N/A
5 X 11
9U-6985
5 X 11
9U-6985
5 X 12
N/A
5 X 12
N/A
5 X 12
N/A
5 X 12
N/A
5 X 14
N/A
* Uses square-cut gasket
** Uses o-ring gasket
*** Uses c-gasket

Advanced
Efficiency

UHE

Fire
Resistant

077-3492
184-3931
5I-8670
130-3212
4I-3950
185-0337
144-6691
N/A
N/A
N/A
093-7521
N/A
3T-8642
149-4533
201-0875
1G-8878
N/A
4T-6788
9T-8578
077-3058
9T-6636
209-5590
9U-5870
9U-6984
108-1153
9T-0973
N/A
6E-6408
152-6902

211-1026
126-1813
N/A
126-1814
126-1814
126-1814
126-1815
N/A
N/A
N/A
N/A
N/A
N/A
N/A
223-7810
102-2828
N/A
223-7809
144-0832
N/A
126-1816
N/A
9U-6983
9U-6983
126-1817
126-1817
225-4118
126-1818
207-5035

N/A
N/A
N/A
N/A
N/A
N/A
121-9868
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
156-0214
N/A
N/A
N/A
N/A
N/A
N/A
198-3188
N/A
134-3014
134-3014
N/A
N/A
N/A

Product Selection: Compare the Levels of


Efficiency
The fine filtering media of higher efficiency filters trap a
larger range of contaminants than lower efficiency filters.
Lower contaminant levels reduce wear on components,
resulting in extended life and improved system performance.
The chart below indicates the three Cat filters relative
efficiencies.

Filter

Efficiency Range

Standard

28 - 40 microns

Advanced

11 - 27 microns

UHE

4 - 10 microns

R* = Reverse flow filter


* 083-7905 CRB 077-5479
** 178-9806 used in hammer applications
3

Cat Hydraulic & Power Train Filters

Filter Upgrade Procedures With A Filter


Bypass Dash Indicator
Upgrading from a Cat
Standard Efficiency Filter
will provide better
contamination control. If the
system has a filter bypass
dash indicator, and the Parts
Identification Manual
recommends a Cat Standard
Efficiency Filter, the
Advanced or UHE filter can
replace it.
The increased efficiency filters remove additional fine particles,
achieving longer hydraulic or power train system life by protecting
components from increased wear. Note that an upgrade in filter
level may reduce your ability to extend the oil change interval.

Filter Upgrade Procedures Without a Filter


Bypass Indicator
1)
2)
3)
4)
5)

Install a UHE Filter for a 250-hour interval to clean-up the system.


Install a higher efficiency filter, either Advanced or UHE.
Sample oil every 100 hours or once a week.
Replace the filter if the bypass valve opens before 250 hours.
Check oil every 100 hours until the filter lasts 250 hours or a change
interval is established.
6) After change interval is established, oil sampling can extend to 500
hours or the recommended sampling interval. Oil cleanliness levels
should be ISO 18/15.
7) With these requirements met, the hydraulic oil change interval can
be increased to:
4,000 hours when using Cat DEO, TDTO-TMS or MTO with
SOS oil analysis
OR
6,000 hours when using Cat HYDO Advanced with SOS oil analysis

CAT DEALERS DEFINE WORLDCLASS PRODUCT SUPPORT.


We offer you the right parts and service
solutions, when and where you need them.
The Cat Dealer network of highly trained
experts can help you maximize your equipment
investment.

PEHJ0069-02
www.cat.com
2007 Caterpillar All Rights Reserved Printed in USA
CAT, CATERPILLAR, their respective logos, Caterpillar Yellow and the POWER EDGE trade dress, as well as
corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

Keeping A Count On Particles


SOSSM Oil Sampling includes Particle Count, which
is reported in the form of ISO Codes. Particle Count
quantifies the number of particles but cannot
distinguish their composition. Each ISO Code
represents a range of particles per milliliter. This
chart shows how the contamination approximately
doubles for each additional increase in the ISO Code.
Optimum cleanliness levels for Cat hydraulic and
power train systems are ISO 18/15 or less.

ISO Code

Number of Particles/mL

23
Very Dirty
40,000 - 80,000
22
20,000 - 40,000
21
10,000 - 20,000
20
5000 - 10,000
19
2500 - 5000
18 Clean (Operating) 18/15
1300 - 2500
17
640 - 1300
16 Very Clean (Fill Oil) 16/13
320 - 640
15
160 - 320
14
80 - 160
13
40 - 80
12
20 - 40
11
10 - 20
10
5 - 10
9
2-5
8
1-2

Cat ELC

Extended Life Coolant for Caterpillar and original equipment manufacturer (OEM)
diesel and gasoline engines

Recommended Use
Cat ELC meets or exceeds the requirements of the following specifications and guidelines:
Cat EC-1
TMC RP-329
TMC RP-338
ASTM D-3306
ASTM D-6210
SAE J1034
Cat ELC also meets the performance requirements of Cummins, Detroit Diesel, International,
Mack and Volvo.

Discover the Difference


Cat ELC is developed, tested and approved by Caterpillar to meet the same high standards as
all Genuine Cat Parts.
Factory-FillUsed as standard factory-fill for all Cat machine cooling systems.
Lower Maintenance CostsReduces engine coolant and additive costs by as much as
500% compared to conventional coolants. It eliminates the need for supplemental coolant
additives, extends coolant change-out intervals and reduces disposal requirements.
Advanced Metal ProtectionIncorporates an advanced formula technology with organic
acid additive corrosion inhibitors, such as a combination of mono and dicarboxylates for
maximum protection of copper, solder, brass, steel, cast iron and aluminum.

50/50 Premix

Cat ELC

SOS services for early problem


detection
SM

Cat ELC for Maximum Coolant Life

Protect your investment with Cat SOS Coolant


Analysis, the ultimate detection and diagnostic tool
for your equipment. We recommend SOS Level 1
Coolant Analysis according to the engines Operation
and Maintenance Manual, and Level 2 Coolant
Analysis annually for all your Cat equipment.

Cat DEACTM
3000 Hour Life or
333,000 km (200,000 miles)
Cat Supplemental Coolant Additives Every 250 Hours
or 25,000 km (15,000 miles)

Cat ELC Extender for Longer Life

Cat ELC (Machines and Commercial Engines)


Cat Extender Every 6000 Hours*

12,000 Hour Life or 6 Years**


(whichever comes first)

Cat ELC (Truck Engines)


Cat Extender Every 500,000 km (300,000 miles)* 1,000,000 km (600,000 miles) or 6 Years**
(whichever comes first)

* Or one-half of the coolant service life.


** These coolant change intervals are only possible with annual SOS Level 2 coolant sampling
and analysis.

Typical Characteristics*
Color
Boiling protection with 15 psi (1 bar) radiator cap
50% Cat ELC/50% water
60% Cat ELC/40% water (ELC concentrate added)
Freezing protection
50% Cat ELC/50% water
60% Cat ELC/40% water (ELC concentrate added)
Nitrite (50% solution)
Molybdate (50% solution)

Strawberry Red
129C (265F)
132C (270F)
-37C (-34F)
-52C (-62F)
500 ppm
530 ppm

*The values shown are typical values and should not be used as quality control parameters to
either accept or reject product. Specifications are subject to change without notice.

CAT DEALERS DEFINE WORLDCLASS PRODUCT SUPPORT.


We offer you the right parts and service
solutions, when and where you need them.
The Cat Dealer network of highly trained
experts can help you maximize your equipment
investment.

PEHJ0067-02
www.cat.com
2007 Caterpillar All Rights Reserved Printed in USA
CAT, CATERPILLAR, their respective logos, Caterpillar Yellow and the POWER EDGE trade dress, as well as
corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

Exceeds Cat EC-1 performance requirements


Protects against cylinder liner/block pitting
and cavitation erosion
Should be added at 500,000 km (300,000 miles) for
Cat powered on-highway trucks and 6,000 hours for
commercial engines
Extender is only necessary once during the
life of the coolant
Ensures Cat ELC performance to 1,000,000 km
(600,000 miles) or 12,000 hours

Cat ELC Extender and Flush


Intervals
Cat ELC Extender should be added after 6,000 hours
or 300,000 miles (500,000 km) of operation, and the
system should be drained and flushed with clean
water after 12,000 hours or 600,000 miles (1,000,000
km). No cleaning agents are needed. If SOSSM
Services are used regularly, safe operation with Cat
ELC may extend beyond 12,000 hours.

Health and Safety


Under normal conditions of intended use, this
product does not pose a risk to health. Excessive
exposure may result in eye, skin or respiratory
irritation. Always observe good hygiene measures.
Read and understand the Material Safety Data
Sheet (MSDS) before using this product. For a copy
of the MSDS, visit us on the web at www.catmsds.
com.

Cat HYDO Advanced 10

6,000 Hour Extended Drain Intervals


Caterpillar is introducing a new hydraulic oil to the fluid product line, Cat HYDOTM Advanced
10. This new oil is a combination of premium additives and specially selected and controlled
higher quality base oils designed to provide extended drain intervals and extra protection to
hydraulic system components.
Cat HYDO Advanced 10 represents a significant performance breakthrough in hydraulic
oil technology. This oil has been developed with an optimized formulation that has been
subjected to severe qualification testing in the field and laboratory for thousands of hours.
The result is the best product available for Cat machine hydraulic systems.

Cat HYDO Advanced 10

0
d1

c
an

HY

DO

Ad

A
DO
Y
H

d
ce

a
dv

10

up to triple the hours of Cat HYDO 10W

when monitored with Caterpillar S O SSM Services oil analysis program-every


500 hours. Reduces owning and operating costs and increases uptime.

specially developed additives


form a protective layer on the wear surfaces, reducing component wear in
high-pressure piston, vane, and gear hydraulic pumps.


contains emulsifiers specifically designed to
disperse water. Cat does not recommend oils that separate, shed, or
release water. Separated water drawn through the hydraulic system can
damage pumps and other components. If this water freezes, it can cause
serious damage.

Oil at start

Oil after field test

Improved Oil Stability


250% increase in oxidation stability per
ASTM D943. Improved oil stability and wear
protection make Cat Hydo Advanced 10 last
longer.

the only hydraulic oil you need to stock for your


maintenance operations. Preferred fill for Cat equipment.

special detergent dispersants keep components


clean and improve transport of contaminants through the filters. Compatible with
Cat Ultra High Efficiency filters.

protects metal surfaces from rust. Better


corrosion protection than most oils in the Cat line-up.


rapid air separation reduces air release time, preventing
cavitation. Cat HYDO Advanced 10 air release time of less than 4 minutes is far
superior compared to Cat HYDO 10W at 7 10 minutes air release time (per
ASTM D3427 testing).

maintains consistent wear protection at


both cold and hot temperatures. Designed to flow readily at cold temperature
start up, and maintains excellent wear protection at operating temperatures.

Cat HYDO
Advanced 10
Cat HYDO


250% increase in oxidation stability per ASTM D943.
Improved oil stability and wear protection make Cat HYDO Advanced 10 last
longer.

* HYDO Advanced 10 lasts up to 3x longer

100%

80%

Destructive Pump Test

HY

60%

Anti-wear /
Anti-oxidant
Additive Remaining

DO
A

dva

40%

nce

d1
0

10W
DO
HY

Cat HYDO Advanced 10 is the best product


for Cat machine hydraulic systems. Tested
side-by-side under severe wear application
conditions, simulated with Cats proprietary
destructive piston pump test, Cat HYDO
Advanced 10 clearly out-performed HYDO
10W. Proof of performance? Significantly less
visible wear. With Cat HYDO Advanced 10, the
piston pump is in excellent condition after 200
hours. The piston pump with HYDO 10 failed
after 178 hours.

20%

0%
0

2000

4000

6000

After 2,000 hours of severe field testing in excavators, Cat HYDO Advanced 10 showed
clear performance improvements over Cat HYDO 10W, with 80% of HYDO Advanceds
anti-wear/anti-oxidant additive remaining compared to 40% for HYDO 10W. At 4,000
hours, HYDO Advanced 10 still showed more than 60% remaining, while HYDO 10Ws
additive was completely depleted.

Cat HYDO Advanced 10

6,000 Hour Extended Drain Intervals


Caterpillar has increased the recommended oil drain interval for hydraulic
systems using Cat HYDO Advanced 10 and Caterpillar S O SSM Services oil
analysis program.

Hydraulic Oil

Standard

Extended1

Cat HYDO 10W

2,000 hours

4,000 hours

Cat HYDO Advanced 10

3,000 hours

6,000 hours

Provided that the oil is:

S O S Services oil analysis program every


500 hours.

English Volume
Package Size
Part Number
Bulk Gallon
314-5168
contact dealer
Bulk Railcar
309-6929
contact dealer
55 Gallon
309-6930
5 Gallon
309-6931
1 Gallon
309-6932
container, 4
per package

78% COST SAVINGS

(FOUR FEWER FILLS)

(THREE FEWER FILLS)

60% COST SAVINGS

Number of Fills

(TWO FEWER FILLS)

34% COST SAVINGS

12,000 Hours

0 h nce
ou d
r d 10
ra wi
in th
In SO
te S
rva
l

HY

DO

2,0 10W
00
ho w
HY
ur ith
DO
dr ou
ai
nI tS
Ad
nt O
va
er S
va
nc
l
e
3,0 d 1
00 0
ho w
ur ith
dr ou
ai
nI tS
nt O
HY
er S
D
va
4,0 O
l
00 10
ho W
ur w
HY
dr it
ai h
DO
nI S
nt O
A
er S
6,0 dv
va
l
0 a

Metric Volume
Package Size
Part Number
Bulk Liter
314-5169
contact dealer
15,000 Liter
309-6934
10,000 Liter
309-6935
2,000 Liter
309-6936
1,000 Liter
309-6937
208 Liter
309-6938
205 Liter
309-6939
200 Liter
309-6940
60 Liter
309-6941
20 Liter
309-6942
19 Liter
309-6943
18 Liter
309-6944
5 Liter
309-6945

Less Hydraulic Oil Used = Cost Savings


The benefits add up. 6,000-hour extended drain intervalsup to triple the hours of Cat
HYDO 10W
n monitored h Caterpillar S O SSM Services oil analysis program.
Reduces ning and operating costs, oil disposal cost, and increases up-time.
3

Cat HYDO Advanced 10

Characteristics
SAE Viscosity Grade
Viscosity
cSt @ 40C (ASTM D445)
cSt @ 100C (ASTM D445)
Viscosity Index (ASTM D2270)
Viscosity after Shear 2 (cSt, during use)
FZG Gear Test DIN 51534, Fail Stage 3
35VQ25 Vickers Total Wear Test
4 Ball (40kg/30min/600rpm/93C ASTM
D4172)
Pour Point, C (ASTM D97)
Pumping @ -30C mPaS
(ASTM D4684)
Zinc, % wt. (ASTM D4951) typical
Copper Strip Corrosion4 (3 hr, ASTM D130)
Rust Protection 5 (ASTM D665B)
Oxidation stability, hours (ASTM D943)
Long Drain Interval, confirmed by field
testing
Filterability, Wet, E DIN ISO 13357-1

Air Release @ 50C (ASTM D3427)


Foam Test 6
Seq. 1 ml. (ASTM D892)
Seq. 2 ml. (ASTM D892)
Seq. 3 ml. (ASTM D892)
Cleanliness

Ability to keep water in emulsion

HYDO
Advanced
10
10W

Typical
Diesel
Engine Oil
API CF SAE
10W
10W

Typical
Premium
Industrial
Hydraulic Oil,
HVLP or HV
Varies

42
6.7
114
6.7
12
33 mg
0.37 mm

40
6.3
105
6.3
12
40-90 mg
Varies

46
8.0
146
6.6
11
<90 mg
Varies

-39
15,000
0.090
1A @ 150C
>5,000

-30
Varies
Varies
1 @ 100C
Varies
2,000 hours

Yes

No

No

Pass

Fail

Pass

7-10 minutes

7-13 minutes
Varies

Pass

4 minutes

Varies

-36
Varies
<0.040
1 @ 100C
Varies
2,000 hours

HYDO Advanced 10
Advantages

Better wear protection,


wider operating
temperature range

Corrosion protection
Longer drain interval;
lower owning and
operating costs
Reduced filter plugging;
improves contamination
control due to better filtration
Better air release
reduces cavitation
damage

0/0
5/0
0/0
No interference Interferes with
optical particle
with optical
counters
particle
counters

Varies

Accurate contamination
Control

Yes

No

Sludge control and water


damage prevention

Yes

1 The values shown are typical values and should not be used as quality control parameters to either accept or reject

protection level.
3 Higher is typically better, but too much active antiwear additives may lead to reduced component life.
4 1A is better than 1B, 1A at 150 C is better than 1A at 100 C.

6 New oil, as received, with 0.1% water by volume added.

CAT

CLASS PRODUCT SUPPORT.


We offer you the right parts and service
solutions, when and where you need them.
The Cat Dealer network of highly trained
experts keeps your entire fleet up and running
to maximize your equipment investment.

PEHJ0182-02
www.cat.com



CAT, CATERPILLAR, their respective logos, Caterpillar Yellow and the POWER EDGE trade dress, as well as
corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

Cat DEO

TM

Diesel Engine Oil for World Wide (except North America, Egypt, Saudi Arabia, Brazil).

Recommended Use
Cat earthmoving, commercial, marine* and on-highway truck diesel engines
Low-emission diesel engines including Cat engines with ACERT Technology
Heavy-duty diesel engines made by other manufacturers that recommend API CI-4, CH-4
or CG-4 classification oil (See Typical Characteristics on page 2 for more information)
Automotive gasoline engines that require API SL classification oils
* Excluding 3600, C280, 3126 and 3116 MUI Marine and MaK diesel engines. The 3116 and 3126 MUI Marine
diesel engines with closed crankcase ventilation systems should use Cat SAEO.

Discover the Difference


Cat DEO is developed, tested and approved by Caterpillar to meet the same high
standards as all Genuine Cat Parts.
Factory-FillUsed as standard factory-fill for Cat machines.
Increased Engine LifeResists oxidation and prevents buildup of deposits on pistons
and rings.
Extended Drain IntervalsExtends oil drain intervals while providing excellent engine
protection and performance when used in conjunction with our SOSSM Services oil
analysis program.
Proven PerformanceTested thoroughly in Cat diesel engines including Cat engines
with ACERT Technology to ensure excellent engine life and performance.
Long-Lasting ProtectionImproved soot control and enhanced shear stability enable
oil to maintain proper viscosity for longer operating periods in Cat engines with ACERT
Technology, especially those equipped with HEUI systems.

SAE 15W-40, SAE 10W-30

Cat DEO
Cat DEO Performance
Performance Requirements
Cat 3406E Endurance Test
Cat C13 ACERT Endurance Test
Cat 3500 Series Test
Cat C13 ACERT Series Wheel Loader Test
C13 500 Hour Engine Test
Improved Soot-Viscosity & Shear Control
High Temperature Shear
Elastomer Compatibility
Piston ring & Cylinder liner wear
Valve train wear, sludge, oil filter plugging
Aeration Control
Bearing Corrosion
Cam roller follower pin wear
Copper, lead and tin erosion
Foaming Control
Viscosity Shear loss
Viscosity Increase from soot
Oxidation
Piston deposits and oil control

Test

Commercial
ECF-2

Tested Beyond
Industry Standards

Cat DEO

Cat Proprietary
Cat Proprietary
Cat Proprietary
Cat Proprietary

Typical Characteristics*
SAE Viscosity Grade
API Service Classification: Diesel
Gasoline
ACEA Classifications
OEM Performance Level: Caterpillar
MB
MAN
Volvo
RVI
Cummins
Mack
Flash Point, C (ASTM D92)
Pour Point, C (ASTM D97)
Viscosity: cSt @ 40 C (ASTM D445)
cSt @ 100 C (ASTM D445)
Viscosity Index (ASTM D2270)
Sulfated Ash, % wt. (ASTM D874)
TBN (ASTM D2896)
Zinc, % wt. (ASTM D4951)
Gravity @ 16 C: API (ASTM D287)
Specific

15W-40
CI-4, CH-4, CG-4,
CF-4/CF
SL
E5/B3/A2
ECF-2
228.3
3275
VDS-3
RLD
CES 20071/72/76/77
EO-M PLUS
224
30
103
14.2
139
1.1
10.6
0.133
29.7
0.878

10W-30**
CI-4, CH-4,
CG-4, CF-4/CF
SL
ECF-2
VDS-2
CES 20071/76
EO-M PLUS
222
36
76
11.5
145
1.1
11.3
0.146
31.3
0.869

**The values shown are typical values and should not be used as quality control parameters to either
accept or reject product. Specifications are subject to change without notice.
**Not available in all regions.

CAT DEALERS DEFINE WORLDCLASS PRODUCT SUPPORT.


We offer you the right parts and service
solutions, when and where you need them.
The Cat Dealer network of highly trained
experts keeps your entire fleet up and running
to maximize your equipment investment.

PEHJ0021-05
www.cat.com
2009 Caterpillar All Rights Reserved Printed in USA
CAT, CATERPILLAR, their respective logos, Caterpillar Yellow and the POWER EDGE trade dress, as well as
corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

In addition to the tests required


for the ECF-2 classification, Cat
DEO undergoes four proprietary
multi-cylinder endurance tests, a
variety of quality assurance tests
and thousands of hours of field
service. Only when it has passed
all these tests can it be approved
by Caterpillar. The chart to the left
indicates the differences between
ECF-2 standards and the proprietary
standards of Caterpillar.
SOSSM Services for early
problem detection
Protect your investment with
Cat SOS oil analysis, the ultimate
detection and diagnostic tool for your
equipment. SOS helps you detect
potential problems before they can
lead to major failures and costly,
unscheduled downtime.
Cat Filters: Complete protection
for your machine
Combine Cat Fluids with Cat Filters
for the highest level of contamination
control and protection for your
machine. We recommend Cat Filters
for all Cat machine applications.

Health and Safety


Under normal conditions of intended
use, this product does not pose a
risk to health. Excessive exposure
may result in eye, skin or respiratory
irritation. Always observe good
hygiene measures. Read and
understand the Material Safety Data
Sheet (MSDS) before using this
product. For a copy of the MSDS, visit
us on the web at www.catmsds.com.

Cat Synthetic GO

Synthetic gear oil for specified Cat direct drive transmissions, differentials, final drives
and sealed-and-lubricated track joints

SAE 75W-140

Recommended Use
Cat Synthetic GO is a full synthetic multi-viscosity API GL-5 classification multipurpose gear oil for
the following applications:

Discover the Difference

Genuine Cat Parts.

Cat Synthetic GO

SsOsSSM services for


early problem detection

Wider Temperature Range


Cat GO 80W-90

-20C to +40C
-4F to +104F

Cat GO 85W-140*

-10C to +50C
+14F to +122F

Cat Synthetic GO 75W-140

-30 -25 -20 -15

Protect your investment with Cat



-30C to +45C
-22F to +113F

-10 -5

0C 5

10

15

20 25

30

35

40 45

50 55

60

65

Typical Characteristics*

investment.

www.cat.com

CLASS PRODUCT SUPPORT.

CAT DEALERS DEFINE WORLD

Health and Safety

Notice:

for the highest level of contamination



for all Cat machine applications.

Cat Filters: Complete


protection for your
machine

Cat DEO

Diesel Engine Oil for North America (Canada, Mexico, United States).

Recommended Use
Cat earthmoving, commercial, marine* and on-highway truck diesel engines
Low-emission diesel engines including Cat engines with ACERT Technology
Heavy-duty diesel engines made by other manufacturers that recommend API CI-4
PLUS, CH-4 or CG-4 category oil (See Typical Characteristics on page 2 for
more information)
Automotive gasoline engines that require API SL category oils
* Excluding 3600, C280, 3126 and 3116 MUI Marine and MaK diesel engines. The 3116 and 3126
MUI Marine diesel engines with closed crankcase ventilation systems should use Cat SAEO.

Discover the Difference


Cat DEO is developed, tested and approved by Caterpillar to meet the same high
standards as all Genuine Cat Parts.
Factory-FillUsed as standard factory-fill for Cat machines.
Increased Engine LifeResists oxidation and prevents build-up of deposits on
pistons and rings.
Longer IntervalsExtends oil drain intervals while providing excellent engine
protection and performance when used in conjunction with our SOSSM Services oil
analysis program.
Proven PerformanceTested thoroughly in Cat diesel engines including Cat
engines with ACERT Technology to ensure excellent engine life and performance.
Long-Lasting ProtectionImproved soot control and enhanced shear stability
enable oil to maintain proper viscosity for longer operating periods in Cat engines
with ACERT Technology, especially those equipped with HEUI systems.

SAE 15W-40, SAE 10W-30

Caterpillar. The difference counts.


Cat Dealers define world-class
product support. We offer you the
right parts and service solutions,
when and where you need them.
The Cat Dealer network of highly
trained experts keeps your entire
fleet up and running to maximize
your equipment investment.

Cat DEO
Cat DEO Performance
Performance Requirements
Cat 3406E Endurance Test
Cat C13 ACERT Endurance Test
Cat 3500 Series Test
Cat C13 ACERT Wheel Loader Test
Improved Soot-Viscosity & Shear Control
High Temperature Shear
Elastomer Compatibility
Piston ring & Cylinder liner wear
Valve train wear, sludge, oil filter plugging
Aeration Control
Bearing Corrosion
Cam roller follower pin wear
Copper, lead and tin erosion
Foaming Control
Viscosity Shear loss
Viscosity Increase from soot
Oxidation
Piston deposits and oil control

Tested Beyond Industry Standards


Test

Commercial
ECF-1

Cat DEO

Cat Proprietary
Cat Proprietary
Cat Proprietary
Cat Proprietary

Other Recommended Oils

Typical Characteristics*
SAE Viscosity Grade
API Service Classification
Diesel

15W-40

10W-30

CI-4 PLUS, CI-4,


CH-4, CG-4,CF-4/CF
SL

CI-4, CH-4,
CG-4, CF-4/CF
SL

Gasoline
OEM Performance Level:
Caterpillar
ECF-1
Volvo
VDS-3
DDC
93K214
Cummins
CES 20071/76/78
Mack
EO-NPP 03, EO-M Plus
Flash Point, C (ASTM D92)
224
Pour Point, C (ASTM D97)
-30
Viscosity
cSt @ 40C (ASTM D445)
120.5
cSt @ 100C (ASTM D445)
15.5
Viscosity Index (ASTM D2270)
135
Sulfated Ash, % wt. (ASTM D874)
1.3
TBN (ASTM D2896)
11.3
Zinc, % wt. (ASTM D4951)
0.146
Gravity @ 16C
API (ASTM D287)
29.3
Specific
0.880

CES 20071/76
EO-M Plus
227
-33
76
11.5
145
1.3
11.3
0.146
31.8
0.867

Health and Safety


Under normal conditions of intended use, this product does not pose a risk to
health. Excessive exposure may result in eye, skin or respiratory irritation. Always
observe good hygiene measures. Read and understand the Material Safety Data
Sheet (MSDS) before using this product. For a copy of the MSDS, visit us on
the web at www.catmsds.com.
www.cat.com

2006 Caterpillar

Cat DEO SYN 5W-40


For engines that must be started in
extremely low temperatures down
to -30C(-22F) consider using Cat
DEO SYN 5W-40. This is a full synthetic
diesel engine oil.

ECF-1
VDS-2

*The values shown are typical values and should not be used as quality control parameters to either
accept or reject product. Specifications are subject to change without notice.

PEHJ0059-02

In addition to the tests required for the ECF-1


classification, Cat DEO undergoes four
proprietary multi-cylinder endurance tests, a
variety of quality assurance tests and
thousands of hours of field service. Only when
it has passed all these tests can it be
approved by Caterpillar. The chart to the left
indicates the differences between ECF-1
standards and the proprietary standards of
Caterpillar.

All Rights Reserved

Printed in USA

SOS Services for early problem detection


Protect your investment with Cat SOS oil
analysis, the ultimate detection and
diagnostic tool for your equipment. SOS
helps you detect potential problems before
they can lead to major failures and costly,
unscheduled downtime.

Cat Filters: Complete protection for your machine


Combine Cat Fluids with Cat Filters for the
highest level of contamination control
and protection for your machine. We
recommend Cat Filters for all Cat machine
applications.

Cat DEO SYN

TM

Full synthetic engine oil.

Recommended Use
Cat earthmoving, commercial, marine* and on-highway truck diesel engines
Low-emission diesel engines including Cat engines with ACERT Technology
Heavy-duty diesel engines made by other manufacturers that recommend an
API CI-4 PLUS/CI-4, CH-4 category oil (See Typical Characteristics on page 2 for
more information)
Automotive gasoline engines that require American Petroleum Institute (API) SL
category oils
* Excluding 3600, C280, 3126 and 3116 MUI Marine and MaK diesel engines. The 3116 and 3126 MUI Marine
diesel engines with closed crankcase ventilation systems should use Cat SAEO.

Discover the Difference


Cat DEO SYN is developed, tested and approved by Caterpillar to meet the same high
standards as Genuine Cat Parts.
Excellent Cold-Weather OperationAllows cold start-ups at temperatures as low as
30 C (22 F) without loss of flow to critical engine parts.
Extended Drain IntervalsExtends oil drain intervals while providing excellent
engine protection and performance when used in conjunction with our SOSSM
Services oil analysis program.
Increased Fuel EconomyReduces friction on internal engine parts.

SAE 5W-40

Cat DEO SYN


While Cat DEO SYN 5W-40 has the
Wider Temperature Range
same high-temperature range as
5W-40
-30C to +50C
-22F to +122F
most SAE 15W-40 oils, its unique
synthetic polyalpaolefin (PAO)
15W-40
-9.5C to +50C
+15F to +122F
molecular structure and higher
viscosity index provide a better
protective film at high temperatures.
-40 -30 -20 -10 0C 10 20 30 40 50 60 70 80 90 100 110 120 130
It also remains fluid at subzero
temperatures and provides rapid cold-engine start-ups at ambient temperatures down
to 30 C (22 F).
Typical Characteristics*
SAE Viscosity Grade
API Service Classification
OEM Performance Levels:
Cummins
Mack
MB
Volvo
Caterpillar
ACEA
Gravity, API
Specific
Pour Point, C ( F)
Flash Point, C (F) (ASTM D92)
Viscosity:
cSt @ 40C
cSt @ 100C
SUS @ 100F
SUS @ 210F
Viscosity Index
Zinc, % wt. (ASTM D4951)
Sulfated Ash, % wt.
TBN (ASTM D2896)

5W-40
CI-4PLUS**, CI-4, CH-4, CG-4, CF, SL
71/76/77/78
EO-NPP 03, EO-M Plus
228.3
VDS-3
ECF-1-a
E5/E4
34.1
0.85
-45 (-49)
226 (437)
95.0
14.8
440.0
77.9
151
0.146
1.35
12.0

**The values shown are typical values and should not be used as quality control parameters to either
accept or reject product. Specifications are subject to change without notice.
**For North America.

Advanced formula.
Maximum performance
and protection.
Cat DEO SYN 5W-40 contains a blend
of synthetic PAO ingredients and
additives that provide outstanding
high-temperature detergency and
all-temperature dispersancy, along
with optimum resistance to thermal
degradation and oxidation, wear and
corrosion. It is balanced to provide
optimum engine life in both highly
loaded, thermally stressed engines
and units operating at lower speeds
with frequent starts and stops.
SOSSM Services for early
problem detection
Protect your investment with
Cat SOS oil analysis, the ultimate
detection and diagnostic tool for your
equipment. SOS helps you detect
potential problems before they can
lead to major failures and costly
unscheduled downtime.
Cat Filters: Complete protection
for your engine
Combine Cat Fluids with Cat Filters
for the highest level of contamination
control and protection for your
machine. We recommend Cat Filters
for all Cat machine applications.

Health and Safety


CAT DEALERS DEFINE WORLDCLASS PRODUCT SUPPORT.
We offer you the right parts and service
solutions, when and where you need them.
The Cat Dealer network of highly trained
experts keeps your entire fleet up and running
to maximize your equipment investment.

PEHP7062-04
www.cat.com
2007 Caterpillar All Rights Reserved Printed in USA
CAT, CATERPILLAR, their respective logos, Caterpillar Yellow and the POWER EDGE trade dress, as well as
corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

Under normal conditions of intended


use, this product does not pose a
risk to health. Excessive exposure
may result in eye, skin or respiratory
irritation. Always observe good
hygiene measures. Read and
understand the Material Safety
Data Sheet (MSDS) before using this
product. For a copy of the MSDS, visit
us on the web at www.catmsds.com.

Cat TDTO

TM

Transmission and drive train oil for Cat transmissions, final drives and wet brake compartments.

Recommended Use
Preferred lubricant for Cat power shift transmissions, and most final drives and wet
brake compartments
Cat machine compartments where TO-4 and TO-4M specification oils are
recommended
Other manufacturers machines that recommend TO-4 or TO-4M or specification
oils for their transmissions, final drives and wet brake compartments (See Typical
Characteristics on page 2 for more information)

Discover the Difference


Cat TDTO is developed, tested and approved by Caterpillar to meet the same high
standards as Genuine Cat Parts.
Factory-FillUsed as standard factory-fill for Cat machine compartments where
TO-4 oils are specified.
Longer Clutch LifeProlongs clutch disc life up to 45%.
Optimum Wear LifeEnsures long life and excellent performance for gears,
bearings and friction disc material.
System-Matched FormulaEngineered as an integral part of Cat power shift
transmissions, most wet brake compartments, and hydrostatic systems

SAE 10W, SAE 30, SAE 50

Cat TDTO
Tested Beyond Industry Standards
The TO-4 specification defines a minimum standard of performance for transmissions
and drive train oils, but Cat TDTO is required to pass five additional Caterpillar tests.
It is only through these tests and thousands of hours of field experience that Caterpillar
is confident in saying Cat TDTO will deliver long life and excellent performance when
used in Cat transmissions and final drives.

Typical Characteristics*
SAE Viscosity Grade
Caterpillar Test
Allison Test
ISO Viscosity Grade
Gravity, API (ASTM D287)
Flash Point, C (F) (ASTM D92)
Pour Point, C (F) (ASTM D97)
Viscosity
cP @ 25 C (ASTM D5293)
cSt @ 40 C (ASTM D445)
cSt @ 100 C (ASTM D445)
Viscosity Index (ASTM D2270)
Calcium, % wt.
Zinc, % wt. (ASTM D4951)
Phosphorus, % wt. (ASTM D4951)
Sulfated Ash, % wt. (ASTM D4951)
TBN (ASTM D2896)

10W
30
TO-4
TO-4
C-4
C-4
46
100
29.7
27.0
202 (395)
224 (435)
33 (27) min. 18 (0) min.
6840
42.0
6.3
97
.298
.127
.110
1.2
7.9

100
11.2
97
.298
.127
.110
1.2
7.9

50
TO-4
C-4

24.7
240 (464)
15 (5) min.

195
18.0
96
.298
.127
.110
1.2
7.9

*The values shown are typical values and should not be used as quality control parameters to either
accept or reject product. Specifications are subject to change without notice..

CAT DEALERS DEFINE WORLDCLASS PRODUCT SUPPORT.


We offer you the right parts and service
solutions, when and where you need them.
The Cat Dealer network of highly trained
experts keeps your entire fleet up and running
to maximize your equipment investment.

PEHP7506-12
www.cat.com
2007 Caterpillar All Rights Reserved Printed in USA
CAT, CATERPILLAR, their respective logos, Caterpillar Yellow and the POWER EDGE trade dress, as well as
corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

SOSSM Services for early


problem detection
Protect your investment with
Cat SOS oil analysis, the ultimate
detection and diagnostic tool for your
equipment. SOS helps you detect
potential problems before they can
lead to major failures and costly
unscheduled downtime.
Cat Filters: Complete protection
for your engine
Combine Cat Fluids with Cat Filters
for the highest level of contamination
control and protection for your
machine. We recommend Cat Filters
for all Cat machine applications.

Health and Safety


Under normal conditions of intended
use, this product does not pose a
risk to health. Excessive exposure
may result in eye, skin or respiratory
irritation. Always observe good
hygiene measures. Read and
understand the Material Safety Data
Sheet (MSDS) before using this
product. For a copy of the MSDS, visit
us on the web at www.catmsds.com.

Cat GO

Gear oil for Cat manual transmissions, differentials and final drives.

Recommended Use
Cat GO is a multi-grade API GL-5 classification gear oil intended for extreme-pressure
applications, such as the following:
Differentials and final drives on Cat Wheel Tractor-Scrapers, specific
Articulated Trucks, Wheel Excavators, and Backhoe Loaders
Cold Planer direct drive transmissions, differentials and final drives
Drum bearings on Vibratory Soil Compactor

Discover the Difference


Cat GO is tested and approved by Caterpillar to meet the same high standards
as Genuine Cat Parts.
Longer Gear and Bearing LifeSuperior thermal stability and oxidation resistance
reduce deposits and wear.
Extreme-Pressure PerformanceProvides extra protection for improved
performance and life in extreme-load conditions.
Simplified MaintenanceMulti-purpose capability reduces number of gear
lubricants needed for maintenance.
Wide Temperature RangeProvides excellent stability at high temperatures and
superior performance at low temperatures for easier start-ups.

SAE 80W-90, SAE 85W-140

Cat GO
Typical Characteristics*
SAE Viscosity Grade
Gravity, API (ASTM D287)
Flash Point, C (F) (ASTM D92)
Pour Point, C (F) (ASTM D97)
Viscosity
cP @ 26 C (ASTM D2983)
cSt @ 40 C (ASTM D445)
cSt @ 100 C (ASTM D445)
Viscosity Index (ASTM D2270)
Phosphorus, % wt. (ASTM D1091)

80W-90
26.6
210 (410)
27 (17)

85W-140
25.1
230 (446)
18 (0)

110,000
139
14.5
104
0.087

N/A
333
25.4
99
0.087

*The values shown are typical values and should not be used as quality control parameters to either
accept or reject product. Specifications are subject to change without notice.

SOSSM Services for early


problem detection
Protect your investment with
Cat SOS oil analysis, the ultimate
detection and diagnostic tool for your
equipment. SOS helps you detect
potential problems before they can
lead to major failures and costly,
unscheduled downtime.
Cat Filters: Complete protection
for your machine
Combine Cat Fluids with Cat Filters
for the highest level of contamination
control and protection for your
machine. We recommend Cat Filters
for all Cat machine applications.

Health and Safety


Under normal conditions of intended
use, this product does not pose a
risk to health. Excessive exposure
may result in eye, skin or respiratory
irritation. Always observe good
hygiene measures. Read and
understand the Material Safety Data
Sheet (MSDS) before using this
product. For a copy of the MSDS, visit
us on the web at www.catmsds.com.

CAT DEALERS DEFINE WORLDCLASS PRODUCT SUPPORT.


We offer you the right parts and service
solutions, when and where you need them.
The Cat Dealer network of highly trained
experts keeps your entire fleet up and running
to maximize your equipment investment.

PEHP7508-08
www.cat.com
2007 Caterpillar All Rights Reserved Printed in USA
CAT, CATERPILLAR, their respective logos, Caterpillar Yellow and the POWER EDGE trade dress, as well as
corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

Cat HYDO Advanced 30

6,000 Hour Extended Drain Intervals


Caterpillar is introducing a new Cat HYDO Advanced 30 hydraulic oil to the fluid product
line. Cat HYDO Advanced 30 compliments the recently introduced Cat HYDO Advanced 10.
These new oils are a combination of premium additives and specially selected and controlled
higher quality base oils designed to provide extended drain intervals and extra protection to
hydraulic system components.
Cat HYDO Advanced 30 and 10 represent a significant performance breakthrough in hydraulic
oil technology. These oils have been developed with an optimized formulation that has been
subjected to severe qualification testing in the field and laboratory for thousands of hours.
The result is the best product available for Cat machine hydraulic systems.
Cat HYDO Advanced 30 is an oil specifically formulated for working in consistently hot
climates with temperatures ranging above 40C (104F).

Ambient Operating Temperature Range


Celsius Temperature Range

Fahrenheit Temperature Range

HYDO Advanced 10

Viscosity

-20C minimum to 40C maximum

-4F minimum to 104F maximum

HYDO Advanced 30

10C minimum to 50C maximum

50F minimum to 122F maximum

Cat HYDO Advanced 30

ed
nc urs r
a
v o
te
Ad 00 h
af urs
O
O
0
D 2,
D ho
HY fter
HY ,000
1
a

d
ce

n
va

O
YD

Ad

DO

HY

up to triple the hours of Cat HYDO 30

when monitored with Caterpillar S O SSM Services oil analysis program-every


500 hours. Reduces owning and operating costs and increases uptime.

specially developed additives


form a protective layer on the wear surfaces, reducing component wear in
high-pressure piston, vane, and gear hydraulic pumps.


contains emulsifiers specifically designed to
disperse water. Cat does not recommend oils that separate, shed, or
release water. Separated water drawn through the hydraulic system can
damage pumps and other components. If this water freezes, it can cause
serious damage.

Oil at start

Oil after field test

Improved Oil Stability


250% increase in oxidation stability per
ASTM D943. Improved oil stability and wear
protection make Cat HYDO Advanced last
longer.

the only hydraulic oil you need to stock for your


maintenance operations. Preferred fill for Cat equipment.

special detergent dispersants keep components


clean and improve transport of contaminants through the filters. Compatible with
Cat Ultra High Efficiency filters.

protects metal surfaces from rust. Better


corrosion protection than most oils in the Cat line-up.

maintains consistent wear protection at


both cold and hot temperatures. Designed to flow readily at cold temperature
start up, and maintains excellent wear protection at operating temperatures.


250% increase in oxidation stability per ASTM D943.
Improved oil stability and wear protection make Cat HYDO Advanced last longer.

Cat HYDO
Advanced
Cat
HYDO

* HYDO Advanced lasts up to 3x longer

100%

Destructive Pump Test


80%

HY

DO

60%

Anti-wear /
Anti-oxidant
Additive Remaining

Adv

anc

ed

40%

DO
HY

Cat HYDO Advanced is the best product


for Cat machine hydraulic systems. Tested
side-by-side under severe wear application
conditions, simulated with Cats proprietary
destructive piston pump test, Cat HYDO
Advanced clearly out-performed HYDO. Proof
of performance? Significantly less visible
wear. With Cat HYDO Advanced, the piston
pump is in excellent condition after 200 hours.
The piston pump with HYDO failed after 178
hours. (Note: test was run with Cat HYDO
Advanced 10 and Cat HYDO 10W.)

20%

0%
0

2000

4000

6000

Longer Lasting Protection

After 2,000 hours of severe field testing in excavators, Cat HYDO Advanced showed
clear performance improvements over Cat HYDO, with 80% of HYDO Advanceds antiwear/anti-oxidant additive remaining compared to 40% for HYDO. At 4,000 hours, HYDO
Advanced still showed more than 60% remaining, while HYDO s additive was completely
depleted.

Cat HYDO Advanced 30

6,000 Hour Extended Drain Intervals


Caterpillar has increased the recommended oil drain interval for hydraulic
systems using Cat HYDO Advanced 30 and Caterpillar S O SSM Services oil
analysis program.

Standard

Extended1

Cat HYDO 30

2,000 hours

4,000 hours

Cat HYDO Advanced 30

3,000 hours

6,000 hours

Hydraulic Oil

Provided that the oil is:

S O S Services oil analysis program every


500 hours.

78% COST SAVINGS

(FOUR FEWER FILLS)

(THREE FEWER FILLS)

60% COST SAVINGS

Number of Fills

(TWO FEWER FILLS)

34% COST SAVINGS

12,000 Hours

Metric Volume

Part Number
Bulk Liter
319-5919
contact dealer
208 Liter
319-5923
200 Liter
319-5922
20 Liter
319-5921
18 Liter
319-5920

0 h nce
ou d
r d 30
ra wi
in th
In SO
te S
rva
l

HY
DO

2,0 3
00 0
ho w
HY
ur ith
DO
dr ou
ai
nI tS
Ad
nt O
va
er S
va
nc
l
e
3,0 d 3
00 0
ho w
ur ith
dr ou
ai
nI tS
nt O
er S
HY
va
4,0 D
l
00 O
ho 30
ur w
HY
dr it
ai h
DO
nI S
nt O
A
er S
6,0 dv
va
l
0 a

Less Hydraulic Oil Used = Cost Savings


The benefits add up. 6,000-hour extended drain intervalsup to triple the hours of Cat
HYDO when monitored with Caterpillar S O SSM Services oil analysis program. Reduces
owning and operating costs, oil disposal cost, and increases up-time.
3

Cat HYDO Advanced 30

Cat HYDO Advanced 30 Typical Characteristics1

Characteristics
SAE Viscosity Grade
Viscosity
cSt @ 40C (ASTM D445)
cSt @ 100C (ASTM D445)
Viscosity Index (ASTM D2270)
Viscosity after Shear 2 (cSt, during use)
4 Ball (40kg/30min/600rpm/93C ASTM
D4172)

HYDO
Advanced
30
30
90
10.6
100
10.6
0.30 mm

Pour Point, C (ASTM D97)


Pumping @ -30C mPaS
(ASTM D4684)

-24
13,600

Zinc, % wt. (ASTM D4951) typical


Copper Strip Corrosion 3 (3 hr, ASTM D130)
Rust Protection (ASTM D665B)
Oxidation stability, hours (ASTM D943)
Long Drain Interval, confirmed by field
testing
Filterability, Wet, E DIN ISO 13357-1

0.090
1A @ 150C

Foam Test 4
Seq. 1 ml. (ASTM D892)
Seq. 2 ml. (ASTM D892)
Seq. 3 ml. (ASTM D892)

Pass

>5,000
Yes
Pass

HYDO Advanced 30
Advantages

Better wear protection,


wider operating
temperature range

Corrosion protection
Longer drain interval;
lower owning and
operating costs
Reduced filter plugging;
improves contamination
control due to better filtration

0/0
0/0
0/0

Reduces foaming

Cleanliness

No interference
with optical
particle
counters

Accurate contamination
control

Ability to keep water in emulsion

Yes

Sludge control and water


damage prevention

1 The values shown are typical values and should not be used as quality control parameters to either accept or

protection level.
3 1A is better than 1B, 1A at 150 C is better than 1A at 100 C.
4 New oil, as received, with 0.1% water by volume added.

CAT

CLASS PRODUCT SUPPORT.


We offer you the right parts and service
solutions, when and where you need them.
The Cat Dealer network of highly trained
experts keeps your entire fleet up and running
to maximize your equipment investment.

PEHJ0214-01
www.cat.com



CAT, CATERPILLAR, their respective logos, Caterpillar Yellow and the POWER EDGE trade dress, as well as
corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

Cat FDAO SYN

TM

Synthetic final drive and axle oil for Off-Highway Trucks and large Track-Type Tractors.

Recommended Use
Preferred lubricant for Cat Off-Highway Truck and D11R carrydozer front wheels,
differentials and final drives operating under high load factors
Compatible with Cat final drives and axles that previously specified Cat FDAO
or TO-4 lubricants and do not contain friction material

Discover the Difference


Cat FDAO SYN is developed, tested and approved by Caterpillar to meet the same
high standards as Genuine Cat Parts.
Extended Drain IntervalsExtends drain intervals up to a factor of three in
Off-Highway Truck final drives, as compared to Cat TDTO and TO-4 oils.
Minimal FoamingFormulated to protect against the damaging effects of air.
Longer Bearing and Gear LifeHas demonstrated the capability to double bearing
life and quadruple gear life when compared to TDTO and T0-4 oils used in offhighway-truck final drives.

Multigrade

Cat FDAO SYN


Extended Drain Intervals with FDAO SYN
(Cat Final Drive for Off-Highway Trucks)*

SOS Services for early


problem detection
Protect your investment with
Cat SOS oil analysis, the ultimate
detection and diagnostic tool for your
equipment. SOS helps you detect
potential problems before they can
lead to major failures and costly
unscheduled downtime.

6000*

4000

2000

Cat Filters: Complete protection


for your machine
*Possible with SOSSM Services

Typical Characteristics*
SAE Viscosity Grade
ISO Viscosity Grade
Caterpillar Test
Gravity, API (ASTM D287)
Flash Point, C (F) (ASTM D92)
Pour Point, C (F) (ASTM D97)
Viscosity
cP @ 20 C (ASTM D2983)
cP @ 30 C (ASTM D4684)
cSt @ 40 C (ASTM D445)
cSt @ 100 C (ASTM D445)
Viscosity Index (ASTM D2270)
Copper Strip (ASTM D130, 2 hrs @ 100 C)

Multigrade
320
FD-1
33.4
246 (474) min.
36 (38)
34,100
131,200
320
31.6
138
1A

*The values shown are typical values and should not be used as quality control parameters to either
accept or reject product. Specifications are subject to change without notice.

CAT DEALERS DEFINE WORLDCLASS PRODUCT SUPPORT.


We offer you the right parts and service
solutions, when and where you need them.
The Cat Dealer network of highly trained
experts keeps your entire fleet up and running
to maximize your equipment investment.

PEHP9570-03
www.cat.com
2007 Caterpillar All Rights Reserved Printed in USA
CAT, CATERPILLAR, their respective logos, Caterpillar Yellow and the POWER EDGE trade dress, as well as
corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

Combine Cat Fluids with Cat Filters


for the highest level of contamination
control and protection for your
machine. We recommend Cat Filters
for all Cat machine applications.

Health and Safety


Under normal conditions of intended
use, this product does not pose a
risk to health. Excessive exposure
may result in eye, skin or respiratory
irritation. Always observe good
hygiene measures. Read and
understand the Material Safety Data
Sheet (MSDS) before using this
product. For a copy of the MSDS, visit
us on the web at www.catmsds.com.

Information Release Memo

FLU08-06-01

December 2008

Cat Fluids
CAT HYDO ADVANCED
FREQUENTLY ASKED QUESTIONS
PRODUCT
What is Cat HYDO Advanced?
Cat HYDO Advanced represents a significant performance breakthrough in
hydraulic oil technology. HYDO Advanced oil is a combination of premium
additives and base stock designed to provide extended drain intervals and extra
protection to hydraulic system components.
This oil has been developed with an optimized formulation that has been
subjected to severe qualifications on testing requirement in order to provide
superior protection and life for Cat hydraulic systems. Cat HYDO Advanced
offers enhanced value to the customer and can be recommended in any
application where Cat HYDO has been used in the past.
What are the major benefits of using Cat HYDO Advanced?
Cat HYDO Advanced is a heavy duty, long life, emulsifying hydraulic oil. Cat
HYDO Advanced was developed, tested and approved by Caterpillar to meet the
same high standards as all Genuine Cat Parts.
6000-Hour Drain IntervalsProvides extended oil-change intervals over Cat
HYDO when used with Cat SOSsm services oil analysis program.
Enhanced Wear Protection Provides maximum long lasting anti-wear
protection for high-pressure piston, vane, and gear hydraulic pumps. Excellent
filterability, fast air release, and exceptional anti-corrosion properties provide
additional protection to the hydraulic system. Detergents and dispersants keep
components clean and transport contaminants to the filters.
Wide Temperature Range Excellent low temperature flow characteristics and
high temperature viscosity allows for use in wide temperature range.

For Dealer Sales Personnel


The information contained herein is intended for circulation only to Caterpillar and dealer employees whose duties require knowledge of such reports and is intended exclusively
for their information and training. Any reproduction of this release without the foregoing explanation is prohibited.

PELJ0931-01

Printed in USA

2008 Caterpillar
All Rights Reserved

Information Release Memo

IRM808290150-01

FLU08-06-01

Page 2

Why is HYDO 10W being replaced?


Over the past 20 years, HYDO 10W has not significantly changed while
hydraulic systems over the same period have experienced significant
technological progress. The new HYDO Advanced 10 is a hydraulic oil
designed to exceed the specifications required by current Cat hydraulic
systems. This new oil represents a significant performance breakthrough in
hydraulic oil technology.
Why is it named Cat HYDO Advanced 10?
No other fluid in the Cat line-up provides the same combination of protection and
extended drain interval capability. Therefore, a distinctive new name was
developed to distinguish its break through technology and unique performance
characteristics.
Will a Bio-HYDO Advanced be available? Why/Why not?
We are considering releasing a new bio-hydraulic fluid that will be an
improvement over our current offering (Bio-HYDO HEES). However, the name of
this new fluid is not, yet decided at this time.
How many oil changes will it take before the full benefits of HYDO
Advanced will realized?
Oil in the hydraulic lines and cylinders cannot be drained without breaking the
lines. Typically 50% to 60% of hydraulic oil is replenished during normal oil
change. Depending on the machine it will take 3 to 4 oil changes before the
cross-contamination is 10% or less. Laboratory tests have demonstrated that
even 50/50 mixture of CAT HYDO Advanced 10 and CAT HYDO 10W has wear
protection and oxidation stability superior to a fill of 100% CAT HYDO 10W.
Is HYDO Advanced exclusively and only available through Cat dealers?
Yes. HYDO Advanced will only be available through the Cat dealer network.

Information Release Memo

IRM808290150-01

FLU08-06-01

Page 3

What viscosity ranges are available?


HYDO Advanced is available in 10W and SAE 30. We are promoting Cat HYDO
10 for worldwide distribution and the preferred oil. Cat HYDO Advanced 30 is a
thicker oil specifically formulated for working in consistently hot climates with
temperatures ranging above 40 degrees Celsius or 104 degrees Fahrenheit.
Ambient Operating Temperature Range
Viscosity
HYDO Advanced 10
HYDO Advanced 30

Celsius Temperature Range


-20C minimum to 40C maximum
10C minimum to 50C maximum

Fahrenheit Temperature Range


-4F minimum to 104F maximum
50F minimum to 122F maximum

Cat HYDO Advanced 30 will be available 3rd Quarter 2008 for certain EAME
and APD dealers with those ambient temperature ranges. Cat HYDO Advanced
30 will replace the previous Cat HYDO 30.
Is there a Cat spec available?
HYDO Advanced meets Caterpillar spec 1E0493.
TESTING & EVALUATION
What was done to demonstrate better component/machine protection?
Extensive lab and field testing was completed to validate HYDO Advanced. Field
Tests were conducted on 43 machines ranging from Skid Steer Loaders to Large
Excavators on 3 continents over 3 years, with applications ranging from waste
handling to heavy construction and mining. These tests were mostly heavyduty/tough applications on high hour-accumulating machines. No problems were
reported. Severe testing demonstrated improved wear protection (less wear
metal in oil samples), improved oil stability, and extended drain interval.
What other oils are acceptable in my machines hydraulic system?
Cat HYDO Advanced is the best product for all Cat machine hydraulic systems.
No other fluid in the Cat line-up offers the same combination of protection and
extended drain capability for hydraulic systems.

Information Release Memo

IRM808290150-01

FLU08-06-01

Page 4

Can I use HYDO Advanced 10 on competitor machines?


HYDO Advance 10 may be appropriate for other brands of equipment. In
general, an oil must pass the Vickers 35VQ25 vane pump test. Reference
Typical Characteristics table below for more information.
Typical Characteristics *
SAE Viscosity Grade
Density (ASTM D4052)
Vickers Vane Pump Test (35VQ25)
FZG (ASTM D5182)
4 Ball (40kg/30min/600rpm/93C)(ASTM D4172)

Flash Point, C (ASTM D92)


Pour Point, C (ASTM D97)
Pumping @ -30C mPaS (ASTM D4684)
Brookfield @ -20C cP (ASTM D2983)
Viscosity
cSt @ 40C (ASTM D445)
cSt @ 100C (ASTM D445)
Viscosity Index (ASTM D2270)
Foam Test **
Seq. 1 ml. (ASTM D892)
Seq. 2 ml. (ASTM D892)
Seq. 3 ml. (ASTM D892)
Zinc, % wt. (ASTM D4951)
Phosphorus, % wt. (ASTM D4951)
Air Release @ 50C (ASTM D3427)
Rust Protection (ASTM D665A)
Copper Strip Corrosion 3 hr @ 100C (ASTM D130)

Oxidation stability, hours (ASTM D943)

HYDO Advanced
10W
0.863
Pass
12
0.37 mm
227
-39
15,000
2,900
42
6.7
114
0/0
5/0
0/0
0.090
0.073
4 minutes
Pass
1A
>5,000

* The values shown are typical values and should not be used as quality control parameters to either accept or reject
product. Specifications are subject to change without notice.
** New oil, as received, with 0.1% water by volume added.

Is HYDO Advanced backward compatible? I.e. Can I use HYDO Advanced in


older equipment?
Yes. HYDO Advanced can be used in any Caterpillar machine, current or noncurrent.
Is HYDO Advanced compatible with seals and other hydraulic system
materials?
Yes. Extensive testing was conducted to insure HYDO Advanced is compatible
with a wide variety of seals and materials.

Information Release Memo

IRM808290150-01

FLU08-06-01

Page 5

PROCESS
How will HYDO Advanced help my owning and operating cost?
HYDO Advanced was developed, tested and approved by Cat to meet the
same high standards as all Genuine Cat Parts. The features and benefits of
HYDO Advanced support lower owning and operating cost because of better
component protection, fewer oil changes, improved filtration, less oil to buy and
dispose, and less downtime.
Can I mix HYDO Advanced 10 with other hydraulic oils?
If HYDO Advanced 10 is mixed with other hydraulic oils, then the user will not
receive the maximum benefits of the oil. To achieve extended drain intervals and
provide the maximum protection to the hydraulic system components, any
hydraulic oil, other than HYDO Advanced 10, can make up no more than 10% of
the total volume of oil in the hydraulic system.
Can I mix HYDO Advanced with Cat DEO? If so, what is the maximum
percent of mixture allowed before HYDO Advanced benefits will diminish?
Cat HYDO Advanced and DEO are fully compatible. To get the full benefit, the
DEO content should be 10% or less.
Will my Caterpillar hydraulic oil filter interval change?
The Caterpillar hydraulic oil filter change interval will remain at the current 500
hours except in the applications for which a longer interval has been approved.
Caterpillar filters are strongly recommended.
What are the recommended drain intervals for HYDO Advanced?
Standard: 3,000 hours
Extended1: 6,000 hours
Provided that the oil is:
1. Monitored with Caterpillar SOS oil analysis program every 500 hours.
2. Filter change interval is 500 hours.
3. Caterpillar hydraulic filters are strongly recommended.

Information Release Memo

IRM808290150-01

FLU08-06-01

Page 6

How often should I monitor the hydraulic oil condition?


Monitor the oil every 500 hours (same as currently prescribed) with Caterpillar
SOSsm services oil sampling.
My Cat machine currently has HYDO 10W in the hydraulic system. How
long should I wait until I add HYDO Advanced 10?
HYDO Advanced 10 and HYDO 10W are fully compatible with each other.
Machine previously filled with HYDO 10W can be filled or topped off with HYDO
Advanced 10. Topping off with HYDO Advanced 10 will improve protection but to
realize the full performance of HYDO Advanced 10, the volume of HYDO 10W
left in the hydraulic system cannot exceed 10% of the total system volume.
How do I change over my bulk tank and equipment?
Bulk tanks and associated lines and equipment should be drained to below 5%
capacity prior to filling with HYDO Advanced 10. The goal is to have no more
than 5% of the previous formulation Cat HYDO 10W mixed in with the HYDO
Advanced 10. It is recommended to coordinate bulk tank and lines cleaning with
an environmental services company, such as Heritage Environmental Services in
the United States that is capable of performing bulk tank and lines cleaning
according to local environmental policies. After the bulk tank has been filled with
HYDO Advanced 10, oil samples should be sent to an SOSsm laboratory for
analysis to determine the percentage of any remaining Cat HYDO Advanced 10
or other cross-contaminants.
Are labels available for bulk tank and machine compartments to indicate
they are filled with HYDO Advanced?
Yes, labels for both are available for ordering. Please see the IRM PELJ0929 for
media/part number details.
What is the contamination level that I should treat?
The recommended cleanliness target for Caterpillar machines operating in the
field is ISO 18/15 or cleaner.

Information Release Memo

IRM808290150-01

FLU08-06-01

Page 7

What will I need to do to set up my SOS lab to handle HYDO Advanced


analysis?
No additional testing equipment is required. Be sure to have correct reference
information.
Is there a need for pre-dilution of the SOS sample?
No.
AVAILABILITY & DISTRIBUTION
When will HYDO Advanced be officially released?
China
July 1, 2007
U.S.
3Q 2008
World Wide 4Q 2008
When will HYDO Advanced be used as factory fill at all Cat manufacturing
plants worldwide?
HYDO Advanced is currently being phased in as the preferred factory fill fluid in
Cat manufacturing plants around the world. By the end of 2008, all facilities filling
machines with HYDO 10W will be filling machines with HYDO Advanced.
Can I still order HYDO 10W and 30 after the release of HYDO Advanced
10 and 30?
No. As a result of this new product release, Cat HYDO will be discontinued in 4Q
2008. Cat HYDO Advanced 10 improves upon all of the advantages of the
previous product while extending the drain interval. Cat HYDO Advanced offers
enhanced value to the customer and is recommended for use in any application
where Cat HYDO has been used in the past.
Will ordering HYDO Advanced be any different?
Ordering and delivery will be the same as current Cat oil products.

Information Release Memo

IRM808290150-01

FLU08-06-01

Page 8

What are the part numbers for HYDO Advanced?


Please refer to the IRM PELJ0929 for the latest part numbers.
How is HYDO Advanced different than industrial hydraulic oils?
Cat HYDO Advanced is formulated to hold and disperse water so that it does not
harm mobile hydraulic systems. Industrial hydraulic oilsoften described as antiweardo not contain emulsifiers and are specifically designed to separate water.
Separated water drawn through the system can damage pumps and other
components. If this water freezes, it can cause even more serious damage.
Avoid oils whose specifications indicate that they separate, shed or release
water.
HEALTH & SAFETY
Does using HYDO Advanced 10 pose a health risk?
Under normal conditions of intended use, this product does not pose a risk to
health. Excessive exposure may result in eye, skin, or respiratory irritation.
Always observe good hygiene measures. Read and understand the Material
Safety Data Sheet (MSDS) before using this product. For a copy of the MSDS,
visit the following website: www.catmsds.com.

Contact Information
Customer Interaction Center
Toll Free: 877 - CAT - CIC0 (877 - 228 - 2420)
International: 309 - 578 - 6298
E-Mail: CIC@cat.com

The information contained herein is intended for circulation only to Caterpillar and dealer employees whose duties require
knowledge of such reports and is intended exclusively for their information and training. Any reproduction of this release without
the foregoing explanation is prohibited.
This IRM can be viewed and downloaded electronically from the Internet. Please refer to your marketing organization specific
site for access to the Electronic Sales Library, which contains all of the active IRMs and product support communication
materials.
CAT, CATERPILLAR, their respective logos, Caterpillar Yellow and the POWER EDGE trade dress, as well as corporate and
product identity used herein, are trademarks of Caterpillar and may not be used without permission.
Electronic Sales Library
Internal Caterpillar Employees http://cds.cat.com/PSMprev.nsf/$$MediaNumber

Information Release Memo

FLU08-04-01

October 2008

Cat Fluids
INTRODUCING CAT HYDO ADVANCED 10
Caterpillar is introducing a new hydraulic oil to the fluid product line, Cat HYDO
Advanced 10. This new oil is a combination of premium additives and specially selected
and controlled higher quality base oils designed to provide extended drain intervals and
extra protection to hydraulic system components.
Cat HYDO Advanced 10 represents a significant performance breakthrough in hydraulic
oil technology. This oil has been developed with an optimized formulation that has been
subjected to severe qualification testing in the field and laboratory for thousands of
hours. The result is the best product available for Cat machine hydraulic systems.
Cat HYDO Advanced 10 Roll Out Plan
China Dealers and Factories
Canada Dealers
Worldwide Dealer Roll Out
Factory Roll Out - All Cat Manufacturing Plants Worldwide

July 1, 2007
December 1, 2007
August 2008 to November 2008
August 2008 to November 2008

For Dealer Sales Personnel


The information contained herein is intended for circulation only to Caterpillar and dealer employees whose duties require knowledge of such reports and is intended exclusively
for their information and training. Any reproduction of this release without the foregoing explanation is prohibited.

PELJ0929-01

Printed in USA

2008 Caterpillar
All Rights Reserved

Information Release Memo

IRM808281250-01

FLU08-04-01

Page 2

Features & Benefits


Due to the premium additives and specially selected and controlled higher quality base
oils, Cat HYDO Advanced 10 significantly outperforms Cat HYDO 10W.
6,000-hour extended drain intervals up to triple the hours of Cat HYDO 10W
when monitored with Caterpillar SOSSM Services oil analysis program every 500
hours. Reduces owning and operating costs and increases uptime.
Enhanced, long-lasting anti-wear protection specially developed additives form
a protective layer on the wear surfaces, reducing component wear in high-pressure
piston, vane, and gear hydraulic pumps.
Holds water in dispersion contains emulsifiers specifically designed to disperse
water. Caterpillar does not recommend oils that separate, shed, or release
water. Separated water drawn through the hydraulic system can damage pumps and
other components. If this water freezes, it can also cause serious damage.
Backward compatibility the only hydraulic oil you need to stock for your
maintenance operations. Preferred fill for Cat equipment.
Improved filtration properties special detergent and dispersants keep
components clean and improves transport of contaminants through the filters.
Compatible with Cat Ultra High Efficiency filters.
Improved corrosion protection protects metal surfaces from rust. Better
corrosion protection than most oils in the Cat line-up.
Fast air release rapid air separation reduces air release time, preventing
cavitation. Cat HYDO Advanced 10-air release time of less than 4 minutes is far
superior compared to Cat HYDO 10W at 7-10 minutes air release time (per ASTM
D3427 testing).
Wide temperature range protection maintains consistent wear protection at both
cold and hot temperatures. Designed to flow readily at cold temperature start up and
maintains excellent wear protection at operating temperatures.
Improved oil stability 250% increase in oxidation stability per ASTM D943.
Improved oil stability and wear protection make Cat HYDO Advanced 10 last longer.

Information Release Memo

IRM808281250-01

FLU08-04-01

Page 3

New! Up to 3x Increased Oil Drain Intervals for Cat HYDO Advanced 10


Caterpillar has increased the recommended oil drain interval for hydraulic systems
using Cat HYDO Advanced 10 and Caterpillar SOS Services oil analysis program.
Hydraulic Oil
Cat HYDO 10W
Cat HYDO Advanced 10

Standard
2,000 hours
3,000 hours

Extended
4,000 hours
6,000 hours

Provided that the oil is:


1. Monitored every 500 hours with Caterpillar SOS Services oil analysis program.
2. Filter change interval is the same.
3. Caterpillar hydraulic filters are strongly recommended.

12,000 hours

12,000 hours

12,000 hours

12,000 hours

34% cost savings

5th Fill

(two fewer fills)

Number of Fills

4th Fill

60% cost savings

(three fewer fills)

3rd

Fill

3rd

Fill

2nd

Fill

3
2

Less hydraulic oil used


= cost savings

78% cost savings


2nd

Fill

2nd

Fill

1st

(four fewer fills)

Fill

Additional
Savings
Additional Expenses

1st

Fill

1st

Fill

1st

Fill

Oil disposal
Downtime
Labor

HYDO
without SOS
2,000 hour
drain interval

HYDO
Advanced 10
without SOS
3,000 hour
drain interval

HYDO
with SOS
4,000 hour
drain interval

HYDO
Advanced 10
with SOS
6,000 hour
drain interval

Contamination
accuracy
Clean out filters

Information Release Memo

IRM808281250-01

FLU08-04-01

Page 4

Availability & Distribution


Availability
x Cat HYDO Advanced 10 will be available worldwide, with rollout starting 3Q2008.
x Cat HYDO 10W will be discontinued 4Q2008.
Distribution
x Ordering and delivery will be the same as current Cat oil products.
x Cat HYDO Advanced 10 is factory fill in all Cat equipment.
x Dealer to do: initiate contact with oil distributor to arrange transition plan.

Cat HYDO Advanced 10 Part Numbers


Metric Volume
Package Size
Part Number
Bulk Liter
314-5169
contact dealer
15,000 Liter
309-6934
10,000 Liter
2,000 Liter
1,000 Liter

309-6935
309-6936
309-6937

208 Liter
205 Liter
200 Liter
60 Liter
20 Liter
19 Liter
18 Liter
5 Liter

309-6938
309-6939
309-6940
309-6941
309-6942
309-6943
309-6944
309-6945

English Volume
Package Size Part Number
Bulk Gallon 314-5168
contact dealer
Bulk Railcar 309-6929
contact dealer
55 gallon
309-6930
5 gallon
309-6931
1 gallon
309-6932
container, 4
per package

Information Release Memo

IRM808281250-01

FLU08-04-01

Page 5

Cat HYDO Advanced 10 Typical Characteristics1


Characteristic

HYDO
Advanced
10

SAE Viscosity Grade


Viscosity
cSt @ 40C (ASTM D445)
cSt @ 100C (ASTM D445)
Viscosity Index (ASTM D2270)
Viscosity after Shear2 (cSt, during use)
FZG Gear Test DIN 51534, Fail Stage3
35VQ25 Vickers Total Wear Test
4 Ball (40kg/30min/600rpm/93C ASTM
D4172)

Pour Point, C (ASTM D97)


Pumping @ -30C mPaS (ASTM D4684)
Ambient Operating Temperature
Range
Zinc, % wt. (ASTM D4951), typical
4

Copper Strip Corrosion (3 hr, ASTM D130)

Rust Protection5 (ASTM D665B)


Oxidation stability, hours (ASTM D943)
Long Drain Interval, confirmed by field
testing
Filterability, Wet, E DIN ISO 13357-1

Air Release @ 50C (ASTM D3427)


Foam Test6
Seq. 1 ml. (ASTM D892)
Seq. 2 ml. (ASTM D892)
Seq. 3 ml. (ASTM D892)
Cleanliness

Ability to keep water in emulsion

10W

Typical
Diesel
Engine Oil
API CF SAE
10W
10W

Typical
Premium
Industrial
Hydraulic Oil,
HVLP or HV
Varies

42
6.7
114
6.7
12
33 mg
0.37 mm

40
6.3
105
6.5
12
40-90 mg
Varies

46
8.0
146
6.6
11
<90 mg
Varies

-39
15,000
-20C min
40C max
0.090
1A @ 150C
Pass
>5,000
Yes

-30
Varies
Varies

-36
Varies
Varies

Varies
1 @ 100C
Varies
2,000 hours
No

<0.040
1 @ 100C
Varies
2,000 hours
No

Pass

Fail

Pass

4 minutes

7-10 minutes

7-13 minutes
Varies

Varies
0/0
5/0
0/0

HYDO Advanced 10
Advantages

Better wear protection,


wider operating
temperature range

Corrosion protection
Longer drain interval;
lower owning and
operating costs
Reduced filter plugging;
improves contamination
control due to better
filtration
Better air release
reduces cavitation
damage

No interference
with optical
particle
counters

Interferes with
optical particle
counters

Varies

Accurate contamination
Control

Yes

Yes

No

Sludge control and water


damage prevention

1
The values shown are typical values and should not be used as quality control parameters to either accept or reject
product. Specifications are subject to change without notice.
2
Oils that contain viscosity modifier additives will become thinner during use in this machine. This will reduce
protection level.
3
Higher is typically better, but too much active antiwear additives may lead to reduced component life.
4
1A is better than 1B, 1A at 150 C is better than 1A at 100 C.
5
May be difficult to pass with 10W engine oils.

New oil, as received, with 0.1% water by volume added.

Information Release Memo

IRM808281250-01

FLU08-04-01

Page 6

Flushing Instructions
x
x
x

Recommended maximum limit of Cat HYDO Advanced 10 cross-contaminated with Cat HYDO 10W:
o Machines: less than 10%
o Bulk storage tanks: less than 5%
Cat HYDO Advanced 10 cross-contamination greater than 10% will potentially reduce the extended
drain interval to the 4,000 hours limit of Cat HYDO 10W.
Place film on tank to indicate oil has been changed over to Cat HYDO Advanced 10.

HYDO Advanced Identification film


Machine

Oil Fill
Location
For Storage Tank

304.8mm (12 inch)

Media #
PEEJ0035

Location
For Machine

40mm (1.57 inch)

Part#
334-4603

Dealer Support Selling Aids


Description

Media Number

Language

Caterpillar Machine Fluids Recommendations


Cat HYDO Advanced 10 304.8 mm (12 inch) diameter film
Cat HYDO Advanced 10 40 mm (1.57 inch) diameter film
Cat HYDO Advanced 10 Data Sheet
Cat HYDO Advanced Brochure
Cat HYDO Advanced FAQs (frequently asked questions)
Dangler
Training PowerPoint Presentation Technical
Training PowerPoint Presentation Commercial

SEBU 6250-15
PEEJ0035
Part # : 334-4603
PEHJ0182
PEDJ0088
PELJ0931
PEPJ0160
See PSSR
See PSSR

English
English
English
English
English
English
English
English
English

Contact Information
Customer Interaction Center
Toll Free: 877 - CAT - CIC0 (877 - 228 - 2420)
International: 309 - 578 - 6298
E-Mail: CIC@cat.com

The information contained herein is intended for circulation only to Caterpillar and dealer employees whose duties require
knowledge of such reports and is intended exclusively for their information and training. Any reproduction of this release without
the foregoing explanation is prohibited.
This IRM can be viewed and downloaded electronically from the Internet. Please refer to your marketing organization specific
site for access to the Electronic Sales Library, which contains all of the active IRMs and product support communication
materials.
CAT, CATERPILLAR, their respective logos, Caterpillar Yellow and the POWER EDGE trade dress, as well as corporate and
product identity used herein, are trademarks of Caterpillar and may not be used without permission.
Electronic Sales Library
Internal Caterpillar Employees http://cds.cat.com/PSMprev.nsf/$$MediaNumber

Information Release Memo

FLU08-05-01

October 2008

Cat Fluids
INTRODUCING CAT HYDO ADVANCED 30
(For APD and EAME Only)
Caterpillar is introducing new Cat HYDO Advanced 30 hydraulic oil to the fluid
product line. Cat HYDO Advanced 30 compliments the recently introduced Cat HYDO
Advanced 10. These new oils are a combination of premium additives and specially
selected and controlled higher quality base oils designed to provide extended drain
intervals and extra protection to hydraulic system components.
Cat HYDO Advanced 30 and 10 represent a significant performance breakthrough in
hydraulic oil technology. These oils have been developed with an optimized formulation
that has been subjected to severe qualification testing in the field and laboratory for
thousands of hours. The result is the best product available for Cat machine hydraulic
systems.
Cat HYDO Advanced 30 is oil specifically formulated for working in consistently hot
climates with temperatures ranging above 40C (104F).
Ambient Operating Temperature Range
Viscosity
HYDO Advanced 10
HYDO Advanced 30

Celsius Temperature Range


-20C minimum to 40C maximum
10C minimum to 50C maximum

Fahrenheit Temperature Range


-4F minimum to 104F maximum
50F minimum to 122F maximum

For Dealer Sales Personnel


The information contained herein is intended for circulation only to Caterpillar and dealer employees whose duties require knowledge of such reports and is intended exclusively
for their information and training. Any reproduction of this release without the foregoing explanation is prohibited.

PELJ0930-01

Printed in USA

2008 Caterpillar
All Rights Reserved

Information Release Memo

IRM808290810-01

FLU08-05-01

Page 2

Cat HYDO Advanced 30 Availability & Distribution Roll Out Plan


x Product roll out will be 3rd Quarter 2008 for certain EAME and APD dealers.
x Cat HYDO Advanced 30 will replace the previous Cat HYDO 30.
x The HYDO Advanced product family includes SAE 10 and 30 viscosity oils.
Features & Benefits
Due to the premium additives and specially selected and controlled higher quality base
oils, Cat HYDO Advanced 30 significantly outperforms Cat HYDO 30.
6,000-hour extended drain intervals up to triple the hours of Cat HYDO 30 when
monitored with Caterpillar SOSSM Services oil analysis program every 500 hours.
Reduces owning and operating costs and increases uptime.
Enhanced, long-lasting anti-wear protection specially developed additives form
a protective layer on the wear surfaces, reducing component wear in high-pressure
piston, vane, and gear hydraulic pumps.
Holds water in dispersion contains emulsifiers specifically designed to disperse
water. Caterpillar does not recommend oils that separate, shed, or release
water. Separated water drawn through the hydraulic system can damage pumps and
other components. If this water freezes, it can also cause serious damage.
Backward compatibility the only hydraulic oil you need to stock for your
maintenance operations. Preferred fill for Cat equipment.
Improved filtration properties special detergent and dispersants keep
components clean and improves transport of contaminants through the filters.
Compatible with Cat Ultra High Efficiency filters.
Improved corrosion protection protects metal surfaces from rust. Better
corrosion protection than most oils in the Cat line-up.
Wide temperature range protection maintains consistent wear protection at both
cold and hot temperatures. Designed to flow readily at cold temperature start up and
maintains excellent wear protection at operating temperatures.
Improved oil stability 250% increase in oxidation stability per ASTM D943.
Improved oil stability and wear protection make Cat HYDO Advanced 30 last longer.

Information Release Memo

IRM808290810-01

FLU08-05-01

Page 3

New! Up to 3x Increased Oil Drain Intervals for Cat HYDO Advanced 30


Caterpillar has increased the recommended oil drain interval for hydraulic systems
using Cat HYDO Advanced 30 and Caterpillar SOSSM Services oil analysis program.
Hydraulic Oil
Cat HYDO 30
Cat HYDO Advanced 30

Standard
2,000 hours
3,000 hours

Extended
4,000 hours
6,000 hours

Provided that the oil is:


1. Monitored every 500 hours with Caterpillar SOSSM Services oil analysis
program.
2. Filter change interval is the same.
3. Caterpillar hydraulic filters are strongly recommended.
12,000 hours

12,000 hours

12,000 hours

12,000 hours

34% cost savings

5th Fill

(two fewer fills)

Number of Fills

4th Fill

60% cost savings

(three fewer fills)

3rd

Fill

3rd

Fill

2nd

Fill

3
2

Less hydraulic oil used


= cost savings

78% cost savings


2nd

Fill

2nd

Fill

1st

(four fewer fills)

Fill

Additional
Savings
Additional Expenses

1st

Fill

1st

Fill

1st

Fill

Oil disposal
Downtime
Labor

HYDO
without SOS
2,000 hour
drain interval

HYDO
Advanced 10
without SOS
3,000 hour
drain interval

HYDO
with SOS
4,000 hour
drain interval

HYDO
Advanced 10
with SOS
6,000 hour
drain interval

Contamination
accuracy
Clean out filters

Information Release Memo

IRM808290810-01

FLU08-05-01

Distribution
x Ordering and delivery will be the same as current Cat oil products.
x Cat HYDO Advanced 10 is factory fill in Cat equipment.
x Dealer to do: initiate contact with oil distributor to arrange transition plan.

Cat HYDO Advanced 30 Part Numbers


Metric Volume
Package Size
Part Number
Bulk Liter
319-5919
contact dealer
208 Liter
319-5923
200 Liter
319-5922
20 Liter
319-5921
18 Liter
319-5920

Page 4

Information Release Memo

IRM808290810-01

FLU08-05-01

Page 5

Cat HYDO Advanced 30 Typical Characteristics1


Characteristic

SAE Viscosity Grade


Viscosity
cSt @ 40C (ASTM D445)
cSt @ 100C (ASTM D445)
Viscosity Index (ASTM D2270)
Viscosity after Shear2 (cSt, during use)
4 Ball (40kg/30min/600rpm/93C ASTM
D4172)

Pour Point, C (ASTM D97)


Pumping @ -30C mPaS (ASTM D4684)
Ambient Operating Temperature
Range
Zinc, % wt. (ASTM D4951), typical
Copper Strip Corrosion3 (3 hr, ASTM D130)

Rust Protection (ASTM D665B)


Oxidation stability, hours (ASTM D943)
Long Drain Interval, confirmed by field
testing
Filterability, Wet, E DIN ISO 13357-1

HYDO
Advanced
30
30
90
10.6
100
10.6
0.30 mm
-24
13,600
10C min
50C max
0.090
1A @ 150C
Pass
>5,000
Yes
Pass

HYDO Advanced 30
Advantages

Better wear protection,


wider operating
temperature range

Corrosion protection
Longer drain interval;
lower owning and
operating costs
Reduced filter plugging;
improves contamination
control due to better
filtration
Reduces foaming

Foam Test4
Seq. 1 ml. (ASTM D892)
Seq. 2 ml. (ASTM D892)
Seq. 3 ml. (ASTM D892)
Cleanliness

0/0
0/0
0/0
No interference
with optical
particle
counters

Accurate contamination
Control

Ability to keep water in emulsion

Yes

Sludge control and water


damage prevention

The values shown are typical values and should not be used as quality control parameters to either accept or reject
product. Specifications are subject to change without notice.
2
Oils that contain viscosity modifier additives will become thinner during use in this machine. This will reduce
protection level.
3
1A is better than 1B, 1A at 150 C is better than 1A at 100 C.
4
New oil, as received, with 0.1% water by volume added.

Information Release Memo

IRM808290810-01

FLU08-05-01

Page 6

Flushing Instructions
x

Recommended maximum limit of Cat HYDO Advanced 30 cross-contaminated with Cat HYDO 30:
o Machines: less than 10%
o Bulk storage tanks: less than 5%
x Cat HYDO Advanced 30 cross-contamination greater than 10% will potentially reduce the extended
drain interval to the 4,000 hours limit of Cat HYDO 30.
x Place film on tank to indicate oil has been changed over to Cat HYDO Advanced 30.

HYDO Advanced Identification film


Machine

Advanced 30

Oil Fill
Location
For Storage Tank

304.8mm (12 inch)

Media #
PEEJ0035

Location
For Machine

40mm (1.57 inch)

Part#
334-4603

Dealer Support Selling Aids


Description

Media Number

Language

Caterpillar Machine Fluids Recommendations


Cat HYDO Advanced 30 304.8 mm (12 inch) diameter film
Cat HYDO Advanced 30 40 mm (1.57 inch) diameter film
Cat HYDO Advanced 30 Data Sheet
Cat HYDO Advanced Brochure
Cat HYDO Advanced FAQs (frequently asked questions)
Dangler
Training PowerPoint Presentation Technical
Training PowerPoint Presentation - Commercial

SEBU 6250-15
PEEJ0038
Part # : 335-9468
PEHJ0214
PEDJ0088
PELJ0931
PEPJ0160
See PSSR
See PSSR

English
English
English
English
English
English
English
English
English

Contact Information
Customer Interaction Center
Toll Free: 877 - CAT - CIC0 (877 - 228 - 2420)
International: 309 - 578 - 6298
E-Mail: CIC@cat.com
The information contained herein is intended for circulation only to Caterpillar and dealer employees whose duties require
knowledge of such reports and is intended exclusively for their information and training. Any reproduction of this release without
the foregoing explanation is prohibited.
This IRM can be viewed and downloaded electronically from the Internet. Please refer to your marketing organization specific
site for access to the Electronic Sales Library, which contains all of the active IRMs and product support communication
materials.
CAT, CATERPILLAR, their respective logos, Caterpillar Yellow and the POWER EDGE trade dress, as well as corporate and
product identity used herein, are trademarks of Caterpillar and may not be used without permission.
Electronic Sales Library
Internal Caterpillar Employees http://cds.cat.com/PSMprev.nsf/$$MediaNumber

S-ar putea să vă placă și