Documente Academic
Documente Profesional
Documente Cultură
21
Wide Tread
48.7 (1238)
42.0
(1068)
Standard Tread
42.0 (1068)
22
TRUCK
MODEL
15
15
H30FT
H35FT
H40FTS
3000 (1360)
3500 (1587)
4000 (1814)
24.0 (610)
24.0 (610)
24.0 (610)
42%
42%
39%
47.0%
47.0%
47.0%
J
in. (mm)
L
in. (mm)
19
Standard OHG
85 (2149)
18
Head Clearance
When Seat Is In
Depressed Position
Optional OHG
82 (2082)
10
11 Optional
41.1
(1043)
L
J
11 Standard
38
37
Seat Type
Standard OHG Optional OHG
Non-Suspension
42.0 (1067)
39.4 (1001)
Semi-Suspension
42.5 (1079)
39.9 (1013)
Full-Suspension
42.0 (1067)
N/A
Swivel Full-Suspension 42.0 (1067)
N/A
22
Tow Pin
12.6 (321)
35
16
Circled dimensions correspond to the line numbers on the tabulated chart inside the Technical Guide. Dimensions are in inches (millimeters).
Truck shown with optional equipment - strobe, light package and TouchPoint E-hydraulics with adjustable armrest and LP tank.
POWERTRAIN
WEIGHT
PERFORMANCE
DIMENSIONS
GENERAL
CERTIFICATION: These Hyster lift trucks meet design specifications of Part II ANSI B56.1-1969, as required by OSHA Section 1910.178(a)(2) and also comply with Part III ANSI B56.1-revision in effect at time of manufacture. Certification of
compliance with the applicable ANSI standards appears on the lift truck.
NOTE: Performance specifications / ratings are for truck equipped as described under Standard Equipment in this Technical Guide. Performance specifications are affected by the condition of the vehicle and how it is equipped, as well as by the
nature and condition of the operating area. Specifications are subject to change and the proposed application should be discussed with your authorized Hyster Company Dealer.
Limited by traction. For further information on this dimension, please contact your local Hyster Company Dealer.
DIMENSIONS
GENERAL
POWERTRAIN
WEIGHT
PERFORMANCE
1 Manufacturer Name
2 Model
Manufacturer Designation
Transmission
Engine
3 Rated Capacity
lb. (kg)
4 Load Center, Distance
in. (mm)
5 Power Type - Gasoline, LPG, Diesel
6 Operator Type
7 Step Height
in. (mm)
8 Tire Type - Cushion, Solid, Pneumatic
9 Wheels, Number - Front / Rear
10 Lift Height, Top of Fork (TOF)
in. (mm)
11 Lift Heights, Standard Limited Free Lift (LFL) with LBR (TOF) in. (mm)
Lift Heights, Optional Full Free Lift (FFL) with LBR (TOF)
in. (mm)
12 Standard Carriage Width
in. (mm)
13 Forks, Thickness x Width x Length
in.
Forks, Thickness x Width x Length
(mm)
14 Fork Spread, Outside Dimensions
in. (mm)
15 Mast Tilt Angles, Forward / Backward
Degrees
16 Length To Face of Forks
in. (mm)
17 Overall Width, Standard Tread
in. (mm)
Overall Width, Wide Tread
in. (mm)
18 Height, Standard Mast - Lowered
in. (mm)
19 Height, Standard Mast - Extended with LBR
in. (mm)
Height, Standard Mast - Extended without LBR
in. (mm)
20 Height, Standard Overhead Guard
in. (mm)
Height, Optional Overhead Guard
in. (mm)
21 Turning Radius, Minimum Outside (OTR)
in. (mm)
22 Length, Center of Wheel to Face of Forks
in. (mm)
23 Aisle Width, Right Angle Stack (Add Length of Load)
in. (mm)
24 Equal Aisle, 90-Degree Intersecting Aisle
in. (mm)
25 Travel Speed, Powershift Transmission RL/NL
mph (km / h)
mph (km / h)
Travel Speed, DuraMatch Transmission RL/NL
26 Lift Speed, Standard 2-Stage LFL RL/NL
ft. / min (m / s)
ft. / min (m / s)
Lift Speed, Optional 2-Stage FFL RL/NL
Lift Speed, Optional 3-Stage FFL RL/NL
ft. / min (m / s)
ft. / min (m / s)
27 Lowering Speed, Standard 2-Stage LFL RL/NL
Lowering Speed, Optional 2-Stage FFL RL/NL
ft. / min (m / s)
ft. / min (m / s)
Lowering Speed, Optional 3-Stage FFL RL/NL
28 Drawbar Pull, Standard Transmission @ 1 mph RL/NL
lb. (kg)
lb. (kg)
Drawbar Pull, Standard Transmission @ 3 mph RL/NL
29 Gradeability, Standard Transmission @ 1 mph RL/NL Percent %
lb. (kg.)
31 Weight, Standard Truck (2-Stg. LFL 84 / 127) NL
Weight, Standard Truck (2-Stg. LFL 84 / 127) RL
lb. (kg.)
lb. (kg.)
32 Axle Loading, Static Front / Rear NL
Axle Loading, Static Front / Rear RL
lb. (kg.)
33 Tire Size, Front
34 Tire Size, Rear
35 Wheelbase
in. (mm)
37 Ground Clearance, Lowest Point NL (with RL subtract -6mm) in. (mm)
in. (mm)
38 Ground Clearance, Center of Wheelbase NL
39 Service Brake - Method of Control / Operation
40 Parking Brake - Method of Control / Operation
41 Battery Type
42 Volts / Cold Cranking Amps
v / cca
43 Engine, Manufacturer / Model
44 Permanent Output
hp
45 Torque @ Rated RPM
ft. Lbs. (kg / m)
46 Number of Cylinders / Displacement
No. / cc (ci)
47 Transmission Type, Standard
Standard Speeds, Forward - Reverse
50 Fuel Tank Capacity (Non LP Units Only)
gal. (litre)
51 Auxillary Hydraulic Pressure Relief for Attachments
PSI (Mpa)
Hyster Company
H30FT
Fortis Package
Electronic Powershift
Yanmar 2.6L
3000 (1360)
24.0 (610)
Diesel
Sit-Down Rider
14.6 (371)
Pneumatic
2x / 2
127 (3232)
5 (140)
35 (902)
38.6 (977)
1.6 X 3.9 X 42.0
(40 X 100 X 1067)
37.5 (955)
6F / 6B
88.0 (2236)
42.0 (1068)
48.7 (1238)
84 (2125)
176 (4455)
150 (3806)
85 (2149)
82 (2082)
77.0 (1955)
15.1 (384)
92.0 (2336)
74.1 (1884)
12.7 (20.5) / 13.0 (20.9)
N/A
112.0 (0.57) / 114.0 (0.58)
101.0 ( 0.51) / 103.0 (0.52)
105.0 (0.53) / 107.0 (0.54)
100.0 (0.51) / 93.0 (0.47)
91.0 (0.46) / 73.0 (0.37)
95.0 (0.48) / 81.0 (0.41)
2786 (12.39) / 1680 (7.47)
2012 (8.95) / 1680 (7.47)
31 / 29
6745 (3059)
9745 (4420)
3354 (1521) / 3391 (1538)
8500 (3856) / 1245 (565)
6.50 x 10 - 10
5.00 x 8.00
54.5 (1385)
5.4 (138)
5.7 (144)
Foot / Hydraulic
Hand / Mechanical
Maintenance Free
12 / 770
Yanmar
40.0
108.0 (14.9) @ 1400 RPM
4 / 2659 (162)
Electronic Powershift
1-1
10.1 (38.4)
2250 (15.5)
Hyster Company
H30FT
Fortis Advance Package
DuraMatch
Yanmar 2.6L
3000 (1360)
24.0 (610)
Diesel
Sit-Down Rider
14.6 (371)
Pneumatic
2x / 2
127 (3232)
5 (140)
35 (902)
38.6 (977)
1.6 X 3.9 X 42.0
(40 X 100 X 1067)
37.5 (955)
6F / 6B
88.0 (2236)
42.0 (1068)
48.7 (1238)
84 (2125)
176 (4455)
150 (3806)
85 (2149)
82 (2082)
77.0 (1955)
15.1 (384)
92.0 (2336)
74.1 (1884)
N/A
12.7 (20.5) / 13.0 (20.9)
112.0 (0.57) / 114.0 (0.58)
101.0 (0.51) / 103.0 (0.52)
105.0 (0.53) / 107.0 (0.54)
100.0 (0.51) / 93.0 (0.47)
91.0 (0.46) / 73.0 (0.37)
95.0 (0.48) / 81.0 (0.41)
2786 (12.39) / 1680 (7.47)
2012 (8.95) / 1680 (7.47)
31 / 29
6745 (3059)
9745 (4420)
3354 (1521) / 3391 (1538)
8500 (3856) / 1245 (565)
6.50 x 10 - 10
5.00 x 8.00
54.5 (1385)
5.4 (138)
5.7 (144)
Foot / Hydraulic
Hand / Mechanical
Maintenance Free
12 / 770
Yanmar
40.0
108.0 (14.9) @ 1400 RPM
4 / 2659 (162)
DuraMatch
1-1
10.1 (38.4)
2250 (15.5)
CERTIFICATION: These Hyster lift trucks meet design specifications of Part II ANSI B56.1-1969, as required by OSHA Section 1910.178(a)(2) and also comply with Part III ANSI B56.1-revision in effect at time of manufacture. Certification of
compliance with the applicable ANSI standards appears on the lift truck.
NOTE: Performance specifications / ratings are for truck equipped as described under Standard Equipment in this Technical Guide. Performance specifications are affected by the condition of the vehicle and how it is equipped, as well as by the
nature and condition of the operating area. Specifications are subject to change and the proposed application should be discussed with your authorized Hyster Company Dealer.
Limited by traction. For further information on this dimension, please contact your local Hyster Company Dealer.
DIMENSIONS
GENERAL
POWERTRAIN
WEIGHT
PERFORMANCE
1 Manufacturer Name
Hyster Company
Hyster Company
2 Model
H35FT
H35FT
Manufacturer Designation
Fortis Package
Fortis Advance Package
Transmission
Electronic Powershift
DuraMatch
Engine
Mazda 2.0L
Mazda 2.0L
3 Rated Capacity
lb. (kg)
3500 (1587)
3500 (1587)
4 Load Center, Distance
in. (mm)
24.0 (610)
24.0 (610)
5 Power Type - Gasoline, LPG, Diesel
LP | Gas
LP | Gas
6 Operator Type
Sit-Down Rider
Sit-Down Rider
7 Step Height
in. (mm)
14.6 (371)
14.6 (371)
8 Tire Type - Cushion, Solid, Pneumatic
Pneumatic
Pneumatic
9 Wheels, Number - Front / Rear
2x / 2
2x / 2
10 Lift Height, Top of Fork (TOF)
in. (mm)
127 (3232)
127 (3232)
11 Lift Heights, Standard Limited Free Lift (LFL) with LBR (TOF) in. (mm)
5 (140)
5 (140)
Lift Heights, Optional Full Free Lift (FFL) with LBR (TOF)
in. (mm)
35 (902)
35 (902)
12 Standard Carriage Width
in. (mm)
38.6 (977)
38.6 (977)
13 Forks, Thickness x Width x Length
in.
1.6 X 3.9 X 42.0
1.6 X 3.9 X 42.0
Forks, Thickness x Width x Length
(mm)
(40 X 100 X 1067)
(40 X 100 X 1067)
14 Fork Spread, Outside Dimensions
in. (mm)
37.5 (955)
37.5 (955)
15 Mast Tilt Angles, Forward / Backward
Degrees
6F / 6B
6F / 6B
16 Length To Face of Forks
in. (mm)
88.0 (2236)
88.0 (2236)
17 Overall Width, Standard Tread
in. (mm)
42.0 (1068)
42.0 (1068)
Overall Width, Wide Tread
in. (mm)
48.7 (1238)
48.7 (1238)
18 Height, Standard Mast - Lowered
in. (mm)
84 (2125)
84 (2125)
19 Height, Standard Mast - Extended with LBR
in. (mm)
176 (4455)
176 (4455)
Height, Standard Mast - Extended without LBR
in. (mm)
150 (3806)
150 (3806)
20 Height, Standard Overhead Guard
in. (mm)
85 (2149)
85 (2149)
Height, Optional Overhead Guard
in. (mm)
82 (2082)
82 (2082)
21 Turning Radius, Minimum Outside (OTR)
in. (mm)
77.0 (1955)
77.0 (1955)
22 Length, Center of Wheel to Face of Forks
in. (mm)
15.1 (384)
15.1 (384)
23 Aisle Width, Right Angle Stack (Add Length of Load)
in. (mm)
92.0 (2336)
92.0 (2336)
24 Equal Aisle, 90-Degree Intersecting Aisle
in. (mm)
74.1 (1884)
74.1 (1884)
25 Travel Speed, Powershift Transmission RL/NL
mph (km / h)
12.7 (20.5) / 13.0 (20.9)
N/A
mph (km / h)
N/A
12.7 (20.5) / 13.0 (20.9)
Travel Speed, DuraMatch Transmission RL/NL
26 Lift Speed, Standard 2-Stage LFL RL/NL
ft. / min (m / s)
112.0 (0.57) / 114.0 (0.58)
112.0 (0.57) / 114.0 (0.58)
ft. / min (m / s)
101.0 (0.51) / 103.0 (0.52)
101.0 (0.51) / 103.0 (0.52)
Lift Speed, Optional 2-Stage FFL RL/NL
Lift Speed, Optional 3-Stage FFL RL/NL
ft. / min (m / s)
105.0 (0.53) / 107.0 (0.54)
105.0 (0.53) / 107.0 (0.54)
ft. / min (m / s)
100.0 (0.51) / 93.0 (0.47)
100.0 (0.51) / 93.0 (0.47)
27 Lowering Speed, Standard 2-Stage LFL RL/NL
Lowering Speed, Optional 2-Stage FFL RL/NL
ft. / min (m / s)
91.0 (0.46) / 73.0 (0.37)
91.0 (0.46) / 73.0 (0.37)
ft. / min (m / s)
95.0 (0.48) / 81.0 (0.41)
95.0 (0.48) / 81.0 (0.41)
Lowering Speed, Optional 3-Stage FFL RL/NL
28 Drawbar Pull, Standard Transmission @ 1 mph RL/NL
lb. (kg) 2515 (11.2) / 1619 (7.2) | 2926 (13.0) / 1619 (7.2) 2515 (11.2) / 1619 (7.2) | 2926 (13.0) / 1619 (7.2)
lb. (kg) 1808 (8.0) / 1619 (7.2) | 2150 (9.56) / 1619 (7.2) 1808 (8.0) / 1619 (7.2) | 2150 (9.56) / 1619 (7.2)
Drawbar Pull, Standard Transmission @ 3 mph RL/NL
29 Gradeability, Standard Transmission @ 1 mph RL/NL Percent %
25 / 26 | 28 / 26
25 / 26 | 28 / 26
lb. (kg.)
6910 (3134)
6910 (3134)
31 Weight, Standard Truck (2-Stg. LFL 84 / 127) NL
Weight, Standard Truck (2-Stg. LFL 84 / 127) RL
lb. (kg.)
10360 (4700)
10360 (4700)
lb. (kg.)
3321 (1506) / 3589 (1628)
3321 (1506) / 3589 (1628)
32 Axle Loading, Static Front / Rear NL
Axle Loading, Static Front / Rear RL
lb. (kg.)
9238 (4190) / 1122 (509)
9238 (4190) / 1122 (509)
33 Tire Size, Front
6.50 x 10 - 10
6.50 x 10 - 10
34 Tire Size, Rear
5.00 x 8.00
5.00 x 8.00
35 Wheelbase
in. (mm)
54.5 (1385)
54.5 (1385)
37 Ground Clearance, Lowest Point NL (with RL subtract -6mm) in. (mm)
5.4 (138)
5.4 (138)
in. (mm)
5.7 (144)
5.7 (144)
38 Ground Clearance, Center of Wheelbase NL
39 Service Brake - Method of Control / Operation
Foot / Hydraulic
Foot / Hydraulic
40 Parking Brake - Method of Control / Operation
Hand / Mechanical
Hand / Mechanical
41 Battery Type
Maintenance Free
Maintenance Free
42 Volts / Cold Cranking Amps
v / cca
12 / 475
12 / 475
43 Engine, Manufacturer / Model
Mazda FE
Mazda FE
44 Permanent Output
hp
40.0 | 46.0
40.0 | 46.0
45 Torque @ Rated RPM
ft. Lbs. (kg / m) 91.0 (12.6) @ 1800 RPM | 104.0 (14.4) @ 1800 RPM 91.0 (12.6) @ 1800 RPM | 104.0 (14.4) @ 1800 RPM
46 Number of Cylinders / Displacement
No. / cc (ci)
4 / 1998 (122)
4 / 1998 (122)
47 Transmission Type, Standard
Electronic Powershift
DuraMatch
Standard Speeds, Forward - Reverse
1-1
1-1
50 Fuel Tank Capacity (Non LP Units Only)
gal. (litre)
10.1 (38.4)
10.1 (38.4)
51 Auxillary Hydraulic Pressure Relief for Attachments
PSI (Mpa)
2250 (15.5)
2250 (15.5)
CERTIFICATION: These Hyster lift trucks meet design specifications of Part II ANSI B56.1-1969, as required by OSHA Section 1910.178(a)(2) and also comply with Part III ANSI B56.1-revision in effect at time of manufacture. Certification of
compliance with the applicable ANSI standards appears on the lift truck.
NOTE: Performance specifications / ratings are for truck equipped as described under Standard Equipment in this Technical Guide. Performance specifications are affected by the condition of the vehicle and how it is equipped, as well as by the
nature and condition of the operating area. Specifications are subject to change and the proposed application should be discussed with your authorized Hyster Company Dealer.
Limited by traction. For further information on this dimension, please contact your local Hyster Company Dealer.
DIMENSIONS
GENERAL
POWERTRAIN
WEIGHT
PERFORMANCE
1 Manufacturer Name
2 Model
Manufacturer Designation
Transmission
Engine
3 Rated Capacity
lb. (kg)
4 Load Center, Distance
in. (mm)
5 Power Type - Gasoline, LPG, Diesel
6 Operator Type
7 Step Height
in. (mm)
8 Tire Type - Cushion, Solid, Pneumatic
9 Wheels, Number - Front / Rear
10 Lift Height, Top of Fork (TOF)
in. (mm)
11 Lift Heights, Standard Limited Free Lift (LFL) with LBR (TOF) in. (mm)
Lift Heights, Optional Full Free Lift (FFL) with LBR (TOF)
in. (mm)
12 Standard Carriage Width
in. (mm)
13 Forks, Thickness x Width x Length
in.
Forks, Thickness x Width x Length
(mm)
14 Fork Spread, Outside Dimensions
in. (mm)
15 Mast Tilt Angles, Forward / Backward
Degrees
16 Length To Face of Forks
in. (mm)
17 Overall Width, Standard Tread
in. (mm)
Overall Width, Wide Tread
in. (mm)
18 Height, Standard Mast - Lowered
in. (mm)
19 Height, Standard Mast - Extended with LBR
in. (mm)
Height, Standard Mast - Extended without LBR
in. (mm)
20 Height, Standard Overhead Guard
in. (mm)
Height, Optional Overhead Guard
in. (mm)
21 Turning Radius, Minimum Outside (OTR)
in. (mm)
22 Length, Center of Wheel to Face of Forks
in. (mm)
23 Aisle Width, Right Angle Stack (Add Length of Load)
in. (mm)
24 Equal Aisle, 90-Degree Intersecting Aisle
in. (mm)
25 Travel Speed, Powershift Transmission RL/NL
mph (km / h)
mph (km / h)
Travel Speed, DuraMatch Transmission RL/NL
26 Lift Speed, Standard 2-Stage LFL RL/NL
ft. / min (m / s)
ft. / min (m / s)
Lift Speed, Optional 2-Stage FFL RL/NL
Lift Speed, Optional 3-Stage FFL RL/NL
ft. / min (m / s)
ft. / min (m / s)
27 Lowering Speed, Standard 2-Stage LFL RL/NL
Lowering Speed, Optional 2-Stage FFL RL/NL
ft. / min (m / s)
ft. / min (m / s)
Lowering Speed, Optional 3-Stage FFL RL/NL
28 Drawbar Pull, Standard Transmission @ 1 mph RL/NL
lb. (kg)
lb. (kg)
Drawbar Pull, Standard Transmission @ 3 mph RL/NL
29 Gradeability, Standard Transmission @ 1 mph RL/NL Percent %
lb. (kg.)
31 Weight, Standard Truck (2-Stg. LFL 84 / 127) NL
Weight, Standard Truck (2-Stg. LFL 84 / 127) RL
lb. (kg.)
lb. (kg.)
32 Axle Loading, Static Front / Rear NL
Axle Loading, Static Front / Rear RL
lb. (kg.)
33 Tire Size, Front
34 Tire Size, Rear
35 Wheelbase
in. (mm)
37 Ground Clearance, Lowest Point NL (with RL subtract -6mm) in. (mm)
in. (mm)
38 Ground Clearance, Center of Wheelbase NL
39 Service Brake - Method of Control / Operation
40 Parking Brake - Method of Control / Operation
41 Battery Type
42 Volts / Cold Cranking Amps
v / cca
43 Engine, Manufacturer / Model
44 Permanent Output
hp
45 Torque @ Rated RPM
ft. Lbs. (kg / m)
46 Number of Cylinders / Displacement
No. / cc (ci)
47 Transmission Type, Standard
Standard Speeds, Forward - Reverse
50 Fuel Tank Capacity (Non LP Units Only)
gal. (litre)
51 Auxillary Hydraulic Pressure Relief for Attachments
PSI (Mpa)
Hyster Company
H35FT
Fortis Package
Electronic Powershift
Yanmar 2.6L
3500 (1587)
24.0 (610)
Diesel
Sit-Down Rider
14.6 (371)
Pneumatic
2x / 2
127 (3232)
5 (140)
35 (902)
38.6 (977)
1.6 X 3.9 X 42.0
(40 X 100 X 1067)
37.5 (955)
6F / 6B
88.0 (2236)
42.0 (1068)
48.7 (1238)
84 (2125)
176 (4455)
150 (3806)
85 (2149)
82 (2082)
77.0 (1955)
15.1 (384)
92.0 (2336)
74.1 (1884)
12.7 (20.5) / 13.0 (20.9)
N/A
112.0 (0.57) / 114.0 (0.58)
101.0 (0.51) / 103.0 (0.52)
105.0 (0.53) / 107.0 (0.54)
100.0 (0.51) / 93.0 (0.47)
91.0 (0.46) / 73.0 (0.37)
95.0 (0.48) / 81.0 (0.41)
2757 (12.26) / 1619 (7.2)
1991 (8.86) / 1619 (7.2)
28 / 26
6910 (3134)
10360 (4700)
3321 (1506) / 3589 (1628)
9238 (4190) / 1122 (509)
6.50 x 10 - 10
5.00 x 8.00
54.5 (1385)
5.4 (138)
5.7 (144)
Foot / Hydraulic
Hand / Mechanical
Maintenance Free
12 / 770
Yanmar
40.0
108.0 (14.9) @ 1400 RPM
4 / 2659 (162)
Electronic Powershift
1-1
10.1 (38.4)
2250 (15.5)
Hyster Company
H35FT
Fortis Advance Package
DuraMatch
Yanmar 2.6L
3500 (1587)
24.0 (610)
Diesel
Sit-Down Rider
14.6 (371)
Pneumatic
2x / 2
127 (3232)
5 (140)
35 (902)
38.6 (977)
1.6 X 3.9 X 42.0
(40 X 100 X 1067)
37.5 (955)
6F / 6B
88.0 (2236)
42.0 (1068)
48.7 (1238)
84 (2125)
176 (4455)
150 (3806)
85 (2149)
82 (2082)
77.0 (1955)
15.1 (384)
92.0 (2336)
74.1 (1884)
N/A
12.7 (20.5) / 13.0 (20.9)
112.0 (0.57) / 114.0 (0.58)
101.0 (0.51) / 103.0 (0.52)
105.0 (0.53) / 107.0 (0.54)
100.0 (0.51) / 93.0 (0.47)
91.0 (0.46) / 73.0 (0.37)
95.0 (0.48) / 81.0 (0.41)
2757 (12.26) / 1619 (7.2)
1991 (8.86) / 1619 (7.2)
28 / 26
6910 (3134)
10360 (4700)
3321 (1506) / 3589 (1628)
9238 (4190) / 1122 (509)
6.50 x 10 - 10
5.00 x 8.00
54.5 (1385)
5.4 (138)
5.7 (144)
Foot / Hydraulic
Hand / Mechanical
Maintenance Free
12 / 770
Yanmar
40.0
108.0 (14.9) @ 1400 RPM
4 / 2659 (162)
DuraMatch
1-1
10.1 (38.4)
2250 (15.5)
CERTIFICATION: These Hyster lift trucks meet design specifications of Part II ANSI B56.1-1969, as required by OSHA Section 1910.178(a)(2) and also comply with Part III ANSI B56.1-revision in effect at time of manufacture. Certification of
compliance with the applicable ANSI standards appears on the lift truck.
NOTE: Performance specifications / ratings are for truck equipped as described under Standard Equipment in this Technical Guide. Performance specifications are affected by the condition of the vehicle and how it is equipped, as well as by the
nature and condition of the operating area. Specifications are subject to change and the proposed application should be discussed with your authorized Hyster Company Dealer.
Limited by traction. For further information on this dimension, please contact your local Hyster Company Dealer.
POWERTRAIN
WEIGHT
PERFORMANCE
DIMENSIONS
GENERAL
CERTIFICATION: These Hyster lift trucks meet design specifications of Part II ANSI B56.1-1969, as required by OSHA Section 1910.178(a)(2) and also comply with Part III ANSI B56.1-revision in effect at time of manufacture. Certification of
compliance with the applicable ANSI standards appears on the lift truck.
NOTE: Performance specifications / ratings are for truck equipped as described under Standard Equipment in this Technical Guide. Performance specifications are affected by the condition of the vehicle and how it is equipped, as well as by the
nature and condition of the operating area. Specifications are subject to change and the proposed application should be discussed with your authorized Hyster Company Dealer.
Limited by traction. For further information on this dimension, please contact your local Hyster Company Dealer.
POWERTRAIN
WEIGHT
PERFORMANCE
DIMENSIONS
GENERAL
Hyster Company
H40FTS
Fortis Package
Electronic Powershift
Yanmar 2.6L
4000 (1812)
24.0 (610)
Diesel
Sit-Down Rider
14.6 (371)
Pneumatic
2x / 2
127 (3232)
5 (140)
35 (902)
38.6 (977)
1.6 X 3.9 X 42.0
(40 X 100 X 1067)
37.5 (955)
6F / 6B
88.0 (2236)
42.0 (1068)
48.7 (1238)
84 (2125)
176 (4455)
150 (3806)
85 (2149)
82 (2082)
78.1 (1985)
15.1 (384)
93.1 (2366)
74.7 (1897)
12.7 (20.5) / 13.0 (20.9)
N/A
112.0 (0.57) / 114.0 (0.58)
101.0 (0.51) / 103.0 (0.52)
105.0 (0.53) / 107.0 (0.54)
100.0 (0.51) / 93.0 (0.47)
91.0 (0.46) / 73.0 (0.37)
95.0 (0.48) / 81.0 (0.41)
2730 (12.1) / 1558 (6.9)
1972 (8.8) / 1558 (6.9)
25 / 23 | 25 / 24
7262 (3294)
11111 (5040)
3229 (1465) / 4033 (1829)
9832 (4460) / 1279 (580)
6.50 x 10 - 10
5.00 x 8.00
54.5 (1385)
5.4 (138)
5.7 (144)
Foot / Hydraulic
Hand / Mechanical
Maintenance Free
12 / 770
Yanmar
40.0
104.0 (14.4) @ 1800 RPM
4 / 2659 (162)
Electronic Powershift
1-1
10.1 (38.4)
2250 (15.5)
Hyster Company
H40FTS
Fortis Advance Package
DuraMatch
Yanmar 2.6L
4000 (1812)
24.0 (610)
Diesel
Sit-Down Rider
14.6 (371)
Pneumatic
2x / 2
127 (3232)
5 (140)
35 (902)
38.6 (977)
1.6 X 3.9 X 42.0
(40 X 100 X 1067)
37.5 (955)
6F / 6B
88.0 (2236)
42.0 (1068)
48.7 (1238)
84 (2125)
176 (4455)
150 (3806)
85 (2149)
82 (2082)
78.1 (1985)
15.1 (384)
93.1 (2366)
74.7 (1897)
N/A
12.7 (20.5) / 13.0 (20.9)
112.0 (0.57) / 114.0 (0.58)
101.0 (0.51) / 103.0 (0.52)
105.0 (0.53) / 107.0 (0.54)
100.0 (0.51) / 93.0 (0.47)
91.0 (0.46) / 73.0 (0.37)
95.0 (0.48) / 81.0 (0.41)
2730 (12.1) / 1558 (6.9)
1972 (8.8) / 1558 (6.9)
25 / 23 | 25 / 24
7262 (3294)
11111 (5040)
3229 (1465) / 4033 (1829)
9832 (4460) / 1279 (580)
6.50 x 10 - 10
5.00 x 8.00
54.5 (1385)
5.4 (138)
5.7 (144)
Foot / Hydraulic
Hand / Mechanical
Maintenance Free
12 / 770
Yanmar
40.0
104.0 (14.4) @ 1800 RPM
4 / 2659 (162)
DuraMatch
1-1
10.1 (38.4)
2250 (15.5)
CERTIFICATION: These Hyster lift trucks meet design specifications of Part II ANSI B56.1-1969, as required by OSHA Section 1910.178(a)(2) and also comply with Part III ANSI B56.1-revision in effect at time of manufacture. Certification of
compliance with the applicable ANSI standards appears on the lift truck.
NOTE: Performance specifications / ratings are for truck equipped as described under Standard Equipment in this Technical Guide. Performance specifications are affected by the condition of the vehicle and how it is equipped, as well as by the
nature and condition of the operating area. Specifications are subject to change and the proposed application should be discussed with your authorized Hyster Company Dealer.
Limited by traction. For further information on this dimension, please contact your local Hyster Company Dealer.
Free-Lift (TOF)
with LBE without LBE
in. (mm)
in. (mm)
5 (140)
5 (140)
5 (140)
5 (140)
29 (752)
35 (902)
55 (1401)
61 (1551)
STANDARD CARRIAGE
INTEGRAL CARRIAGE
U.S. CUSTOMARY
U. S. CUSTOMARY
5000
5000
H40FTS
4000
H40FTS
H35FT
3000
H30FT
2000
4000
H35FT
3000
H30FT
2000
1000
1000
0
10
20
30
40
50
60
10
20
30
40
50
60
STANDARD CARRIAGE
INTEGRAL CARRIAGE
10
METRIC
METRIC
2500
2500
2000
H40FTS
H35FT
1500
H30FT
1000
H40FTS
2000
H35FT
1500
H30FT
1000
500
500
0
250
500
750
1000
1250
1500
250
500
750
1000
TRUCK CONFIGURATION:
3-STAGE FFL MAST (169.2 in MFH for H30FT, 163.4 in MFH for H35FT & 151.6 in MFH for H40FT)
38.5 (978 mm) Standard carriage with load backrest extension (LBE).
Basic truck equipped with the Mazda 2.0L gasoline engine with single-speed electronic powershift transmission.
Standard tires and tread.
1250
1500
STANDARD EQUIPMENT
Fortis Package
OPTIONAL EQUIPMENT
Powertrain protection system
Premium electronic monitoring
High air intake with precleaner
Accumulator
Keyless start (with auxiliary key switch)
TouchPoint hydraulics with fully adjustable armrest
TouchControl hydraulic control handle with fully
adjustable armrest
Return to set tilt
Square-wave anti-clog radiator
82.0 (2082 mm) Overhead guard
Semi-suspension seat - vinyl or cloth
Dual inch brake pedals
EZXchange LP tank bracket
Password protection
Audible Reverse activated 82-102 dB(A) self-adjusting
alarm**
Visible amber strobe light - continuous activated, overhead
guard mounted
Various light packages
- Two brake/back-up high intensity LED lights
- Two front and one rear halogen work lights
- Two front, one rear halogen work light and two
brake/tail/back-up high intensity LED lights
Parts publications - printed or CD, serial number specific
UL Classification GS or LPS
Michelin XZM radial tires
Pneumatic shaped solid tires
Various tread widths available
Operator checklist
Load Weight Indicator
Impact Monitor
Swivel Full Suspension Seat Vinyl or Cloth
11
Model H30FT: 3000 lbs. at 24.0 (1814 kg at 610 mm) load center.
Model H35FT: 3500 lbs. at 24.0 (2268 kg at 610 mm) load center.
Model H40FTS: 4000 lbs. at 24.0 (2721 kg at 610 mm) load center.
3-Stage full free-lift (FFL) VISTA mast to 157.0 (4000 mm) maximum fork height
38.6 (977 mm) Hook-type carriage with 42.0 (1067 mm) long forks
48.0 Tall load backrest extension (LBE)
Standard tread
MASTS
TRANSMISSION
COOLING SYSTEM
Multiple cooling system designs:
- Serpentine core
- Square-wave anti-clog
All radiators utilize cross-flow aluminum cores, pusher
type fans and permanently lubricated water pump
Knife-edge type fan shrouds that direct air flow through
the counterweight air passages
15 psi operating system pressure
ELECTRICAL SYSTEM
CANbus electrical system simplifies truck wiring and
enhances truck dependability
IPP 66 sealed automotive style electrical connectors
Standardized wire routing, all wires are color coded, and
marked with numbers for easy identification
Vehicle System Manager (VSM) directly or indirectly
controls all electrical functions except those controlled
by the Engine Control Unit (ECU)
12-volt maintenance free battery provides 475 cold
cranking amps (770 cold cranking amps with Diesel)
Onboard diagnostics monitoring and feedback
Anti-restart protection
HYDRAULIC SYSTEM
Manual Hydraulic Control Valve & Electro-Hydraulic Control Valve
Tilt and auxiliary systems have 2,250 psi (15.5 Mpa) relief
pressure in all valve variations
Hydraulic system is protected by a replaceable 3-micron
paper element in-tank filter assembly
Hydraulic breather filter includes an anti-splash baffle and is
rated at three micron absolute
O-Ring face seal fittings with captive O-Ring grooves are
used on all high pressure connections
Emergency lowering valve allows load to be lowered in the
event of battery power loss (E-hydraulic valve only)
100 Mesh suction line strainer
BRAKES
Asbestos free, self-energizing, automatically adjusting
drum brake assemblies
Single circuit master cylinder with sealed fluid reservoir
and magnetic fluid level sensor
Ratchet-type, hand-activated parking brake lever allows
controlled application
OPERATOR COMPARTMENT
Cowl mounted hydraulic hand levers
TouchPoint electro-hydraulic seat side mini-levers
with full adjustable armrest (optional)
TouchControl hydraulic seat side joystick with full
adjustable armrest (optional)
12-Inch textured steering wheel with spinner knob.
Automotive style foot controls with single braking/inching
pedal (dual pedals are optional)
Integrated dashboard display is backlit, allowing easy
visibility under all lighting conditions
Grid-style overhead guard offers superb visibility at
extended heights
Infinitely adjustable tilt steer column
MONOTROL pedal controls engine speed and truck
direction, freeing operators hands to operate steering
and hydraulic levers
12
Hyster Company
P.O. Box 7006
Greenville, North Carolina
27835-7006
Part No.: H30-40FTS/TG
1/2006 Litho in U.S.A.