Sunteți pe pagina 1din 64

HARTZELL PROPELLER INC.

One Propeller Place


Piqua, Ohio 45356-2634 U.S.A.
Telephone: 937.778.4200
Fax: 937.778.4215

MANUAL REVISION TRANSMITTAL


Manual 165A (61-00-65)
Illustrated Tool and Equipment Manual
REVISION 18 dated February 2016
Attached is a copy of Revision 18 to Hartzell Manual 165A.
Page Control Chart for Revision 18
Remove
Chapter/Page No.

Insert
Chapter/Page No.

COVER COVER
cover and page 2
cover and page 2
REVISION HIGHLIGHTS
pages 1 thru 4

REVISION HIGHLIGHTS
pages 1 thru 4

LIST OF EFFECTIVE PAGES


pages 1 thru 4

LIST OF EFFECTIVE PAGES


pages 1 thru 4

TOOL AND EQUIPMENT INDEX


pages 2-3 and 2-4
pages 2-11 thru 2-18

TOOL AND EQUIPMENT INDEX


pages 2-3 and 2-4
pages 2-11 thru 2-18

TOOL AND EQUIPMENT LIST


pages 4-1 and 4-2
pages 4-5 and 4-6
pages 4-15 and 4-16
TR-019
pages 4-29 and 4-30
pages 4-35 and 4-36
TR-017
TR-018
pages 4-39 thru 4-42

pages 4-43 and 4-44
pages 4-79 thru 4-82
TR-015

pages 4-87 and 4-88
pages 4-95 and 4-96
pages 4-111 thru 4-114

TOOL AND EQUIPMENT LIST


pages 4-1 and 4-2
pages 4-5 and 4-6
pages 4-15 and 4-16
Refer to NOTE 1
pages 4-29 and 4-30
pages 4-35 and 4-36
Refer to NOTE 1
Refer to NOTE 1
pages 4-39 thru 4-42
pages 4-42.1 and 4-42.2, insert after page 4-42
pages 4-43 and 4-44
pages 4-79 thru 4-82
Refer to NOTE 1
pages 4-82.1 and 4-82.2, insert after page 4-82
pages 4-87 and 4-88
pages 4-95 and 4-96
pages 4-111 thru 4-114

This page may be discarded after proper filing of the revision.

Page Control Chart for Revision 18, continued


Remove
Chapter/Page No.

Insert
Chapter/Page No.

TOOL AND EQUIPMENT LIST, CONTINUED TOOL AND EQUIPMENT LIST, CONTINUED
pages 4-129 thru 4-132
pages 4-149 and 4-150
pages 4-153 and 4-154
TR-020

pages 4-129 thru 4-132


pages 4-149 and 4-150
pages 4-153 thru 4-156
Refer to NOTE 1

NOTE 1:

Record the removal of a Temporary Revision on the Record of Temporary Revisions


page in this manual.

NOTE 2:

When the manual revision has been inserted in the manual, record the information required
on the Record of Revisions page in this manual.

NOTE 3:

Pages distributed in this revision may include pages from previous revisions if they are
on the opposite side of revised pages. This is done as a convenience to those users who
wish to print a two-sided copy of the new revision.

Manual No. 165A


Revision 18
61-00-65
February 2016

Illustrated

Tool and Equipment


Manual

Hartzell Propeller Inc.


One Propeller Place
Piqua, Ohio 45356-2634 U.S.A.
Phone: 937.778.4200
Fax: 937.778.4215

TOOL AND EQUIPMENT MANUAL


165A

1995, 1996, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2011, 2012, 2013, 2014, 2016 Hartzell Propeller Inc. - All rights reserved

COVER

61-00-65

Page 2
Rev. 18 Feb/16

TOOL AND EQUIPMENT MANUAL


165A

REVISION 18 HIGHLIGHTS

COVER

Revised to match the manual revision

REVISION HIGHLIGHTS
Revised to match the manual revision

LIST OF EFFECTIVE PAGES


Revised to match the manual revision

TOOL AND EQUIPMENT INDEX


Revised to match the manual revision

TOOL AND EQUIPMENT LIST

Removed TE139-1, Torque Wrench Adaptor AST-2805-1

Revised TE551, Torque Wrench Adaptor description

Revised the section, Profilometer

Incorporated TR-019 that revised TE228-1, Piston Installation Socket description

Revised the section, "Digital Protractor"

Incorporated TR-017 that added TE560, TE561, and TE562, Fit Check Tools

Incorporated TR-018 that added TE563 thru TE566, Templates

Added TE571 and TE572, Templates

Added TE112-5, Thread Insert Removal Tool

Revised TE437, Probe Housing Component description

Incorporated TR-015 that added TE441-3, TE441-4, and TE441-5, Pressure Check
Tools

Added TE569, Optical Comparator Overlay and revised TE19, Optical Comparator
Overlay description

Revised the section, "Adjustable Riser Fixture"

Revised the section, "Bench Top Blade Angle Protractor"

Revised the section, "Slimsert Installation and Removal Tool"

Revised TE453, Balance Adapter description

Incorporated TR-020 that added TE567, Extended Socket and TE568, Air Check
Block

Added the TE570, Tube Nut

Revised TE455, Blade Spud Adapter description and added the superseded by section

Revised TE539, Blade Spud Adapter description and added the supersedes section

Made other minor language/format changes

REVISION HIGHLIGHTS

61-00-65

Page 1
Rev. 18 Feb/16

TOOL AND EQUIPMENT MANUAL


165A

REVISION 18 HIGHLIGHTS
1. Introduction
A. General
(1)

This is a list of current revisions that have been issued against this manual.
Please compare to the RECORD OF REVISIONS page to make sure that all
revisions have been added to the manual.

B. Components
(1)

Revision No. indicates the revisions incorporated in this manual.

(2)

Issue Date is the date of the revision.

(3)

Comments indicates the level of the revision.


(a)

New Issue is a new manual distribution. The manual is distributed in its


entirety. All the revision dates are the same and no change bars are used.

(b)

Reissue is a revision to an existing manual that includes major content


and/or major format changes. The manual is distributed in its entirety. All
the revision dates are the same and no change bars are used.

(c)

Major Revision is a revision to an existing manual that includes major


content or minor format changes over a large portion of the manual. The
manual is distributed in its entirety. All the revision dates are the same, but
change bars are used to indicate the changes incorporated in the latest
revision of the manual.

REVISION HIGHLIGHTS

61-00-65

Page 2
Rev. 18 Feb/16

TOOL AND EQUIPMENT MANUAL


165A

(d)

Minor Revision is a revision to an existing manual that includes minor


content changes to the manual. Only the revised pages of the manual are
distributed. Each page retains the date and the change bars associated
with the last revision to that page.
Revision No.
Original
Revision 1
Revision 2
Revision 3
Revision 4
Revision 5
Revision 6
Revision 7
Revision 8
Revision 9
Revision 10
Revision 11
Revision 12
Revision 13
Revision 14
Revision 15
Revision 16
Revision 17
Revision 18

Issue Date

Comments

Nov/95
Aug/96
May/98
Jan/99
Oct/99
Apr/00
May/01
Aug/01
Mar/02
Jun/02
Sep/03
Aug/04
Aug/11
Jul/12
Jun/13
Dec/13
Apr/14
Dec/14
Feb/16

Total rewrite
Minor Revision
Minor Revision
Minor Revision
Minor Revision
Minor Revision
Minor Revision
Minor Revision
Minor Revision
Minor Revision
Minor Revision
Minor Revision
Major Revision
Minor Revision
Minor Revision
Minor Revision
Minor Revision
Minor Revision
Minor Revision

REVISION HIGHLIGHTS

61-00-65

Page 3
Rev. 18 Feb/16

TOOL AND EQUIPMENT MANUAL


165A

(This page is intentionally blank.)

REVISION HIGHLIGHTS

61-00-65

Page 4
Rev. 18 Feb/16

TOOL AND EQUIPMENT MANUAL


165A

LIST OF EFFECTIVE PAGES


Chapter

Page

Revision Level

Date

Cover/Cover Back

Cover/Inside Cover

Rev. 18

Feb/16

Revision Highlights

1 thru 4

Rev. 18

Feb/16

Record of Revisions

1 and 2

Rev. 12

Aug/11

Record of Temporary Revisions

1 and 2

Rev. 12

Aug/11

List of Effective Pages

1 thru 4

Rev. 18

Feb/16

Table of Contents

1 and 2

Rev. 17

Dec/14

Introduction

1 and 2

Rev. 17

Dec/14

Introduction

Rev. 13

Jul/12

Introduction

4 thru 10

Rev. 17

Dec/14

1-1 and 1-2

Rev. 12

Aug/11

Tool and Equipment Index

2-1

Rev. 15

Dec/13

Tool and Equipment Index

2-2

Rev. 12

Aug/11

Tool and Equipment Index

2-3 and 2-4

Rev. 18

Feb/16

Tool and Equipment Index

2-5

Rev. 14

Jun/13

Tool and Equipment Index

2-6 and 2-7

Rev. 12

Aug/11

Tool and Equipment Index

2-8

Rev. 15

Dec/13

Tool and Equipment Index

2-9

Rev. 12

Aug/11

Tool and Equipment Index

2-10

Rev. 16

Apr/14

Tool and Equipment Index

2-11

Rev. 18

Feb/16

Tool and Equipment Index

2-12

Rev. 15

Dec/13

Tool and Equipment Index

2-13 thru 2-18

Rev. 18

Feb/16

3-1 and 3-2

Rev. 12

Aug/11

Tool and Equipment List

4-1

Rev. 12

Aug/11

Tool and Equipment List

4-2

Rev. 18

Feb/16

Tool and Equipment List

4-3 thru 4-5

Rev. 12

Aug/11

Tool and Equipment List

4-6

Rev. 18

Feb/16

Tool and Equipment List

4-7

Rev. 14

Jun/13

Tool and Equipment List

4-8 and 4-9

Rev. 12

Aug/11

Tool and Equipment List

4-10

Rev. 15

Dec/13

Tool and Equipment List

4-11

Rev. 12

Aug/11

Numerical Index

Alphabetical Index

LIST OF EFFECTIVE PAGES

61-00-65

Page 1
Rev. 18 Feb/16

TOOL AND EQUIPMENT MANUAL


165A

LIST OF EFFECTIVE PAGES


Chapter

Page

Revision Level

Date

Tool and Equipment List

4-12 and 4-13

Rev. 15

Dec/13

Tool and Equipment List

4-14

Rev. 13

Jul/12

Tool and Equipment List

4-15

Rev. 18

Feb/16

Tool and Equipment List

4-16 thru 4-23

Rev. 12

Aug/11

Tool and Equipment List

4-24

Rev. 15

Dec/13

Tool and Equipment List

4-25

Rev. 12

Aug/11

Tool and Equipment List

4-26

Rev. 17

Dec/14

Tool and Equipment List

4-27 and 4-28

Rev. 12

Aug/11

Tool and Equipment List

4-29

Rev. 18

Feb/16

Tool and Equipment List

4-30

Rev. 12

Aug/11

Tool and Equipment List

4-31

Rev. 15

Dec/13

Tool and Equipment List

4-32 thru 4-35

Rev. 12

Aug/11

Tool and Equipment List

4-36

Rev. 18

Feb/16

Tool and Equipment List

4-37

Rev. 14

Jun/13

Tool and Equipment List

4-38

Rev. 15

Dec/13

Tool and Equipment List

4-39

Rev. 18

Feb/16

Tool and Equipment List

4-40 and 4-41

Rev. 12

Aug/11

Tool and Equipment List

4-42

Rev. 18

Feb/16

Tool and Equipment List

4-42.1 and 4-42.2

Rev. 18

Feb/16

Tool and Equipment List

4-43

Rev. 18

Feb/16

Tool and Equipment List

4-44 thru 4-57

Rev. 12

Aug/11

Tool and Equipment List

4-58

Rev. 15

Dec/13

Tool and Equipment List

4-59 and 4-60

Rev. 12

Aug/11

Tool and Equipment List

4-61 and 4-62

Rev. 15

Dec/13

Tool and Equipment List

4-63 and 4-64

Rev. 12

Aug/11

Tool and Equipment List

4-65

Rev. 15

Dec/13

Tool and Equipment List

4-66 thru 4-69

Rev. 12

Aug/11

Tool and Equipment List

4-70 and 4-71

Rev. 15

Dec/13

Tool and Equipment List

4-72 thru 4-74

Rev. 12

Aug/11

Tool and Equipment List

4-75

Rev. 17

Dec/14

LIST OF EFFECTIVE PAGES

61-00-65

Page 2
Rev. 18 Feb/16

TOOL AND EQUIPMENT MANUAL


165A

LIST OF EFFECTIVE PAGES


Chapter

Page

Revision Level

Date

Tool and Equipment List

4-76 thru 4-78

Rev. 12

Aug/11

Tool and Equipment List

4-79

Rev. 18

Feb/16

Tool and Equipment List

4-80

Rev. 12

Aug/11

Tool and Equipment List

4-81

Rev. 15

Dec/13

Tool and Equipment List

4-82

Rev. 18

Feb/16

Tool and Equipment List

4-82.1 and 4.82.2

Rev. 18

Feb/16

Tool and Equipment List

4-83 and 4-84

Rev. 12

Aug/11

Tool and Equipment List

4-85 thru 4-87

Rev. 15

Dec/13

Tool and Equipment List

4-88

Rev. 18

Feb/16

Tool and Equipment List

4-89 and 4-90

Rev. 12

Aug/11

Tool and Equipment List

4-91

Rev. 15

Dec/13

Tool and Equipment List

4-92 thru 4-94

Rev. 12

Aug/11

Tool and Equipment List

4-95

Rev. 18

Feb/16

Tool and Equipment List

4-96 thru 4-99

Rev. 12

Aug/11

Tool and Equipment List

4-100

Rev. 15

Dec/13

Tool and Equipment List

4-101 and 4-102

Rev. 12

Aug/11

Tool and Equipment List

4-103

Rev. 16

Apr/14

Tool and Equipment List

4-104 thru 4-111

Rev. 12

Aug/11

Tool and Equipment List

4-112

Rev. 18

Feb/16

Tool and Equipment List

4-113

Rev. 12

Aug/11

Tool and Equipment List

4-114

Rev. 18

Feb/16

Tool and Equipment List

4-115 and 4-116

Rev. 12

Aug/11

Tool and Equipment List

4-117 thru 4-119

Rev. 15

Dec/13

Tool and Equipment List

4-120 and 4-121

Rev. 12

Aug/11

Tool and Equipment List

4-122

Rev. 16

Apr/14

Tool and Equipment List

4-123 and 4-124

Rev. 12

Aug/11

Tool and Equipment List

4-125

Rev. 15

Dec/13

Tool and Equipment List

4-126 and 4-127

Rev. 12

Aug/11

Tool and Equipment List

4-128

Rev. 15

Dec/13

Tool and Equipment List

4-129

Rev. 12

Aug/11

LIST OF EFFECTIVE PAGES

61-00-65

Page 3
Rev. 18 Feb/16

TOOL AND EQUIPMENT MANUAL


165A

LIST OF EFFECTIVE PAGES


Chapter

Page

Revision Level

Date

Tool and Equipment List

4-130 and 4-131

Rev. 18

Feb/16

Tool and Equipment List

4-132 and 4-133

Rev. 12

Aug/11

Tool and Equipment List

4-134 and 4-135

Rev. 17

Dec/14

Tool and Equipment List

4-136

Rev. 13

Jul/12

Tool and Equipment List

4-137 thru 4-143

Rev. 14

Jun/13

Tool and Equipment List

4-144 thru 4-147

Rev. 15

Dec/13

Tool and Equipment List

4-148

Rev. 16

Apr/14

Tool and Equipment List

4-149

Rev. 15

Dec/13

Tool and Equipment List

4-150

Rev. 18

Feb/16

Tool and Equipment List

4-151 and 4-152

Rev. 16

Apr/14

Tool and Equipment List

4-153

Rev. 17

Dec/14

Tool and Equipment List

4-154 thru 4-156

Rev. 18

Feb/16

LIST OF EFFECTIVE PAGES

61-00-65

Page 4
Rev. 18 Feb/16

TOOL AND EQUIPMENT MANUAL


165A

TE
NUMBER

PART NUMBER

DESCRIPTION

VENDOR

PAGE

TE69
TE70
TE71
TE72
TE73
TE74
TE75
TE76
TE77

BST-10001
BST-3056
BST-3057
BST-3054
AST-2856
BST-3037
BST-2982
BST-2983
BST-2806

Transfer Tube O-ring Installation Tool


PCU Bushing Installation Tool
PCU Bushing Installation Tool
PCU Manifold Installation Tool
Pilot O-ring Installation Tool
Aft Control Spring Compressor
Drill Jig
Drill Jig
Air Pressure Gauge Kit - Obsolete

HP
HP
HP
HP
HP
HP
HP
HP

4-59,4-94
4-54,4-92
4-54,4-92
4-53,4-92
4-4
4-48,4-92
4-40
4-40
OBS

TE78

CST-3028

Dual Acting Propeller Assembly Tool Kit

HP

4-92

TE79

CST-3028-1

Dual Acting Line Maintenance Tool Kit

HP

TE80

BST-2912-10

C Flange Spindle

HP

TE81
TE82
TE83

796514021
A-2334
AST-2833

Vacuum Pump 54976-029


Tool Kit
Safety Nozzle

VR
HP
HP

TE84

BST-3041

Rigging Pin

HP

TE85
TE86
TE87
TE88
TE89
TE90
TE91
TE92
TE93
TE94
TE95

BST-2912-11
BST-2958
BST-2938
BST-2939
BST-2939N
BST-2940
BST-2941
BST-2946
DST-2934
AST-2857
BT-1313(-)( )
799200105/
PE 105
BST-2960-3
BST-3045
BST-3039
CST-2987
BST-2947
BST-2948
BST-2949
BST-2950
BST-2951
BST-2952
BST-2876

Stop Pin
Pitch Angle Stop Plug
Shot Peen Plug
Shot Peen Plug
Shot Peen Plug
Shot Peen Plug
Shot Peen Plug
Shot Peen Plug
Blade Bearing Press
Probe and Probe Holder
Eddy Current Probe Unit
Bench Top Blade Angle Protractor no longer available
Digital Protractor
Puller
Bearing Puller
Beta System Puller
Bushing Puller
Bearing Puller
Bearing Puller
Bearing Puller
Bearing Puller
Bearing Puller
Pilot Tube Puller

HP
HP
HP
HP
HP
HP
HP
HP
HP
HP
OL
PE
HP
HP
HP
HP
HP
HP
HP
HP
HP
HP
HP
HP

4-94
4-26,
4-91,4-99
4-1
4-1
4-3
4-49,4-92,
4-94
4-26,4-99
4-35
4-29
4-76
4-30
4-30
4-31
4-32
4-100
4-5,4-111
4-66,4-111

TE96
TE97
TE98
TE99
TE100
TE101
TE102
TE103
TE104
TE105
TE106
TE107

TOOL AND EQUIPMENT INDEX

61-00-65

4-112
4-36
4-50,4-92
4-49,4-92
4-89
4-32
4-33
4-33
4-34
4-76
4-34
4-21,4-102

Page 2-3
Rev. 18 Feb/16

TOOL AND EQUIPMENT MANUAL


165A

TE
NUMBER

PART NUMBER

DESCRIPTION
Retention Bearing Puller
Adaptor
Adaptor
Socket, 6 Point, 1/8 inch, 3/8 Drive

VENDOR

PAGE

HP
CS/HP
CS/HP
SO

4-63
4-63
4-63
4-92

TE108
TE108-1
TE108-2
TE109

BT-223
BT-223+9
BT-223+10
GFS081

TE110

BST-3065

Blade Shot Peen Plug Removal Tool

HP

4-58

TE111
TE112
TE112-1
TE112-3
TE112-4
TE112-5
TE113
TE114
TE115
TE116
TE117
TE118
TE119
TE120

1227-6
BST-3019
BST-3019-3
BST-3019-4
BST-3019-8
BST-3019-7
BST-2884
BST-2959
BST-2984
DT-1724-( )
BST-10002
BST-3060
AST-2961
BST-2922

Helicoil Insert Removal Tool


Thread Insert Removal Tool
Thread Insert Removal Tool
Thread Insert Removal Tool
Thread Insert Removal Tool
Thread Insert Removal Tool
Plug-Lifting Ring
Alignment Check Rod
Alignment Check Rod
Rolling Machine
Beta Valve Freeze Sleeve
Shot Peen Masking Tool
Shipping Sleeve
Modified Deep Well Socket

HE
HP
HP
HP
HP
HP
HP
HP
HP
HP
HP
HP
HP
HP

TE121

AST-2979

Test Specimen for Calibration

HP

TE122
TE123
TE124
TE125
TE125-1
TE126
TE127
TE128
TE129
TE130
TE131
TE132
TE133
TE134
TE135
TE136

BST-2912-2
BST-2912-3
BST-2912-1
BST-2912
BST-2912+
BST-3024
BST-2912-12
BST-2847
CST-2901-( )
n/a
BST-2825
79651417A
ED-520
ED-530
79656547A
BST-10003

#20 Spline Spindle


#30 Spline Spindle
Flanged Hub Spindle
Building Buck Components
Building Buck Components
Blade Assembly Support Stand
Mid Pitch Stop
Probe Support
Propeller Assembly Table
Vu Thru II Tachometer - no longer available
Template
Vacuum Filter 55007-020
Eddy Current Test Instrument
Eddy Current Test Instrument
Timer, 12 Hour 6X547
Flight Idle Set Fixture

HP
HP
HP
HP
HP
HP
HP
HP
HP
n/a
HP
VR
MF
MF
PE
HP

TE137

BT-1271-1,2

Shot Peen Tube Assembly

HP

TE138
TE139
TE139-1

AST-2802
AST-2805
n/a

Plastic Wedge
Torque Wrench Adaptor
n/a

HP
HP
n/a

4-115
4-43
4-43
4-43
4-43
4-43
4-22
4-36
4-41
4-102
4-59,4-92
4-55
4-8
4-28
4-13,
4-111
4-26,4-99
4-26,4-99
4-26,4-99
4-26,4-99
4-26,4-99
4-43
4-26,4-99
4-20,4-111
4-99,4-26
OBS
4-18
4-1
4-111
4-111
4-1
4-60,4-92
4-64,4-95,
4-126
4-1
4-2
n/a

61-00-65

Page 2-4
Rev. 18 Feb/16

TOOL AND EQUIPMENT INDEX

TOOL AND EQUIPMENT MANUAL


165A

TE
NUMBER

PART NUMBER

DESCRIPTION

TE373

CST-10050

Optical Comparator Overlay

TE374

CUST. P/N

Transducer Assembly

TE375

Approved Units

Ultrasonic Flaw Detector

TE376
TE377
TE378

n/a
BST-2975-12
BST-2975-13

n/a
Fit Check Tool
Fit Check Tool

TE379

02643

Shot Peen Gun

TE380
TE381
TE382
TE382-1
TE383
TE384
TE385
TE386
TE387
TE388

CST-3110
BST-3109
DST-3146
DST-3146-1
BST-3103
BST-3104
BST-2837+1+3
BST-2837+2
B-3368
A-3204

Cylinder Cap
T-Handle Wrench
Thread Gauge Airflow Kit
Thread Gauge Airflow Kit
Feathering Tool
Cylinder Installation Rod
Modified Socket
Anti-Rotation Pin
5/16-24 Hex Nut
5/16-24 Set Screw

TE389-1

BST-2930-1
SR25W4A
MR25W4A
225-072722

TE389-2

BST-2930-2
SR43W4A
MR43W4A
225-072734
225-890028

TE389-3

BST-2930-3
SR50W4A
MR50W4A
225-072738
225-890051

TE389-4

BST-2930-4
SR56W4A
MR56W4A
225-072742
225-890053

TE389-5

BST-2930-5
SR19W4A
MR19W4A
225-072718

TE389-6

BST-2930-6
SR16W4A
MR16W4A
225-072714

VENDOR

PAGE

HP

4-88
4-124,
PM
4-116
4-124,
Cust. P/N
4-116
n/a
n/a
HP
4-39
HP
4-39
4-126,
CL
4-64,4-95
HP
4-96
HP
4-74
HP
4-106,4-81
HP
4-81,4-106
HP
4-74
HP
4-75
HP
4-19
HP
4-19
HP
4-20
HP
4-20

Slimsert Installation Tool

HP
RC
MK
AC

4-114,4-12

Slimsert Installation Tool

HP
RC
MK
AC
AC

4-114

Slimsert Installation Tool

HP
RC
MK
AC
AC

4-114

Slimsert Installation Tool

HP
RC
MK
AC
AC

4-114

Slimsert Installation Tool

HP
RC
MK
AC

4-114

Slimsert Installation Tool

HP
RC
MK
AC

4-114

TOOL AND EQUIPMENT INDEX

61-00-65

Page 2-11
Rev. 18 Feb/16

TOOL AND EQUIPMENT MANUAL


165A

TE
NUMBER

PART NUMBER

VENDOR

PAGE

Slimsert Installation Tool

HP
RC
MK
AC
AC

4-114

Slimsert Installation Tool

HP
RC
MK
AC

4-114

Slimsert Installation Tool

HP
RC
MK
AC

4-114

BST-2930-10
SR11W4A
TE389-10
MR11W4A
225-072706

Slimsert Installation Tool

HP
RC
MK
AC

4-114

TE390

DT-2997-2

Pressure Check Adapter

CS

TE391

DT-2997-4

Pitch Change Bore Plug

CS

TE392

DT-2997-5

Pitch Change Bore Plug

CS

TE393

DT-2997-7

Pressure Check Adapter

CS

TE394

DT-2997-8

Pressure Check Adapter

CS

TE395
TE396
TE397
TE398
TE399
TE400
TE401
TE402
TE403
TE403-1

0.0525 inch dia.


0.0620 inch dia.
0.0850 inch dia.
0.2634 inch dia.
0.2700 inch dia.
0.0962 inch dia.
0.1400 inch dia.
0.1480 inch dia.
BST-3022
BST-3022A

Gear Inspection Wire


Gear Inspection Wire
Gear Inspection Wire
Gear Inspection Wire
Gear Inspection Wire
Gear Inspection Wire
Gear Inspection Wire
Gear Inspection Wire
Reamer
Reamer

VK
VK
VK
VK
VK
VK
VK
VK
HP
HP

4-105,
4-104
4-104,
4-105
4-104,
4-105
4-105,
4-104
4-105,
4-104
4-125
4-125
4-125
4-125
4-125
4-125
4-125
4-125
4-75
4-75

TE404

AST-2968

Stud Installation/Torque Check Tool

HP

4-12

TE404-1

AST-2968-1

Stud Installation/Torque Check Tool

HP

4-12

TE404-2

AST-2968-2

Stud Installation/Torque Check Tool

HP

4-12

TE405
TE406
TE407
TE408
TE409

AST-3163-( )
AST-3157
AST-2971-1
AST-2971-2
A-2327

Shot Peen Plug Kit


Shot Peen Plug
Screw - 0.50 inch (12.7 mm)
Screw - 0.62 inch (15.7 mm)
Slimsert Repair Kit

HP
HP
HP
HP
HP

4-11
4-11
4-11
4-11
4-12

TE389-7

BST-2930-7
SR37W4A
MR37W4A
225-072730
225-890031

TE389-8

BST-2930-8
SR31W4A
MR31W4A
225-072726

TE389-9

BST-2930-9
SR14W4A
MR14W4A
225-072710

DESCRIPTION

TOOL AND EQUIPMENT INDEX

61-00-65

Page 2-12
Rev. 15 Dec/13

TOOL AND EQUIPMENT MANUAL


165A

TE
NUMBER

PART NUMBER

DESCRIPTION

VENDOR

PAGE

HP
RC

4-12

TE410

B-6986-258
SR258

TE411

791762313
Tap
5/16-24 UNF-3B MOD

HP
RC

4-12

TE412

BST-2931-1
SR25D

Step Drill

HP
RC

4-12

TE413
TE414
TE415
TE416
TE417
TE418
TE419
TE420
TE421

CST-2969
BST-3006
BST-3158
BST-3159
BST-3160
BST-3161
BST-3162
BST-2991
AST-3154

Blade Angle Locating Fixture


Paint Mask Cap
Paint Mask Cap
Paint Mask Cap
Paint Mask Cap
Paint Mask Cap
Paint Mask Cap
Spacer
Slimsert Repair Kit

HP
HP
HP
HP
HP
HP
HP
HP
HP

4-96
4-77
4-77
4-77
4-77
4-77
4-77
4-78
4-13

TE422

B-6986-192
SR192

Slimsert

HP
RC

4-13

TE423

99620070
1/4-28 UNF-3B

Tap

HP
RC

4-13

TE424

BST-2931-5
SR19D

Step Drill

HP
RC

4-13

TE425
TE426
TE427
TE428

n/a
n/a
CST-3169
BST-3081

n/a
n/a
Sleeve Installation Tool
Mask Screw

n/a
n/a
HP
HP

TE429

DT-2997-9

Pressure Check Adapter

CS

Slimsert

n/a
n/a
4-97
4-78
4-105,
4-104

No Go Gauge

HM

4-127

TE431
TE432
TE433
TE434
TE435

.2760 Pin Gauge,


Minus "Y" Tolerance
BST-3200
AST-3175
BST-2912-17
101088
CST-3015

E13890 Master Blade, Group 0


Torque Wrench Adaptor
A Flange Spindle
Eddy Current Probe
Calibration Standard

4-71
4-7
4-26
4-127
4-98

TE436

AST-3475

Profilometer

TE436-1
TE437
TE438
TE439
TE440
TE440-1

AST-3475-1
BST-3227
BST-3226
AST-3174
BST-3177
BST-3063

Profilometer
Probe Housing Component
Blade Pitch Fixture
Ball Hex Driver
Blade Seal Alignment Tool
Blade Seal Alignment Tool

CS
CS
HP
HP
HP
MH
MT
MH
HP
CS
HP
HP
HP

TE430

TOOL AND EQUIPMENT INDEX

61-00-65

4-14,4-79
4-14
4-79,4-14
4-79
4-14
4-80
4-80

Page 2-13
Rev. 18 Feb/16

TOOL AND EQUIPMENT MANUAL


165A

TE
NUMBER

PART NUMBER

TE441

BST-7587

TE441-1

BST-7587-1

TE441-2
TE441-3
TE441-4
TE441-5
TE442

DESCRIPTION

VENDOR

PAGE

CS

4-82

CS

4-82

BST-7587-2
BST-7587-3
BST-7587-4
BST-7587-5
BST-4114

Pressure Check Tool


Pressure Check Tool - Kit without the Pilot Tube
Installation Tool
Pressure Check Tool
Pressure Check Tool
Pressure Check Tool
Pressure Check Tool
Composite Balance Tube Puller

CS
CS
CS
CS
CS

4-82
4-82
4-82
4-82
4-80

TE443

BT-3838

Grease Seal Pressure Test Tool (Adapter)

HP

4-81,4-106

TE443-1
TE444
TE445

BT-3838-1
DST-3483
BST-7588

Grease Seal Pressure Test Tool


Masking Fixture
Insert Installation Tool

HP
CS
CS

TE446

DST-5855(F)

Shot Peen Machine Assembly

TE447

DST-5855-1(F)

Shot Peen, "Y" Shank Knob Kit

HP

TE448

CST-3178

Bolt Alignment Fixture

HP

TE449

101679

"E" Shank Form Tool

HP

TE449-1

105473

"E" Shank Form Tool

HP

TE450

101736

"E" Shank Potting Mold

HP

TE451

GT-3669

Composite E-shank Comparison Chart

HP

TE452
TE453
TE454
TE455
TE456
TE457
TE458
TE459
TE460
TE461
TE462
TE463
TE464
TE465
TE466
TE467
TE468
TE469
TE470

101999
101923
101781
101932
103570
101939
101060
103572
102690
BST-3004-12A
BST-3004-12B
BST-3004-13A
BST-3004-13B
BST-3004-14A
BST-3004-14B
BST-3004-15A
BST-3004-15B
BST-3004-16A
BST-3004-16B

Tube Puller Assembly


Balance Adapter
Plug Puller
Blade Spud Adapter
Mandrel
Torque Wrench Adapter
Shot Peen Plug
Ring
E13890 Master Blade, Group 4
Template
Template
Template
Template
Template
Template
Template
Template
Template
Template

TOOL AND EQUIPMENT INDEX

4-81,4-106
4-107
4-82
4-108,
CS/WH
4-109

CS
CS
HP
CS
CS
CS/HP
HP
CS
CS
HP
HP
HP
HP
HP
HP
HP
HP
HP
HP

61-00-65

4-109,
4-108
4-98
4-128,
4-129
4-128,
4-129
4-128,
4-129
4-129,
4-128
4-129
4-130
4-130
4-156
4-131
4-132
4-132
4-133
4-71
4-42
4-42
4-42
4-42
4-42
4-42
4-42
4-42
4-42
4-42

Page 2-14
Rev. 18 Feb/16

TOOL AND EQUIPMENT MANUAL


165A

TE
NUMBER

PART NUMBER

DESCRIPTION

VENDOR

PAGE

TE471
TE472
TE473

BST-3004-19A
BST-3004-20A
BST-3004-20B

Template
Template
Template

HP
HP
HP

4-42
4-42
4-42

TE474

CST-3000-11

Initial Erosion Shield Sample Program Kit

HP

4-90

TE475

CST-3000-11A

Supplemental Erosion Shield Sample Program Kit

HP

4-90

TE476

CST-3000-12

Initial Erosion Shield Sample Program Kit

HP

4-90

TE477

CST-3000-12A

Supplemental Erosion Shield Sample Program Kit

HP

4-90

TE478

CST-3000-15

Initial Erosion Shield Sample Program Kit

HP

4-90

TE479

CST-3000-15A

Supplemental Erosion Shield Sample Program Kit

HP

4-90

TE480
TE481
TE482
TE483
TE484
TE485
TE486
TE487
TE488
TE488-1
TE488-2
TE489
TE489-1
TE489-2
TE489-3
TE490
TE490-1
TE490-2
TE490-3
TE490-4
TE491

BST-2975-14
BST-2975-16
BST-2975-17
BST-2975-18
BST-2975-19
BST-2975-20
791911212
CST-421
BST-2890
BST-2891
BST-2894
BST-2895
BST-2896
BST-2897
BST-2899
BST-2902
BST-2903
BST-2904
BST-2905
BST-2907
DST-3017

Fit Check Tool


Fit Check Tool
Fit Check Tool
Fit Check Tool
Fit Check Tool
Fit Check Tool
212-8 Driver
Stud Fixture Plate
Spring Compressor Base
Spring Compressor Base
Spring Compressor Base
Spring Compressor Retainer
Spring Compressor Retainer
Spring Compressor Retainer
Spring Compressor Retainer
Spring Compressor Guide Rod
Spring Compressor Guide Rod
Spring Compressor Guide Rod
Spring Compressor Guide Rod
Spring Compressor Guide Rod
Propeller Transport Cart

HP
HP
HP
HP
HP
HP
HP
HP
HP
HP
HP
HP
HP
HP
HP
HP
HP
HP
HP
HP
HP

TE492

BST-3050

Chip Detector Fitting

HP

TE493

BST-3051

Chip Dectector Fitting Cover

HP

TE494

BT-1271-4

Shot Nozzle Unit

HP

TE494-1

BT-1271-5

Shot Nozzle Unit

HP

TE494-2

BT-1271-6

Shot Nozzle Unit

HP

TE494-3

BT-1271-7

Shot Nozzle Unit

HP

TE494-4

BT-1271-8

Shot Nozzle Unit

HP

4-39
4-39
4-39
4-39
4-39
4-39
4-133
4-83
4-22,4-85
4-22,4-85
4-22,4-85
4-23,4-85
4-23,4-86
4-23,4-85
4-23,4-85
4-24,4-85
4-24,4-86
4-24,4-85
4-24,4-85
4-24,4-85
OBS
4-52,
4-101
4-52,
4-101
4-64,4-95,
4-126
4-64,4-95,
4-126
4-64,4-95,
4-126
4-64,4-95,
4-126
4-64,4-95,
4-126

TOOL AND EQUIPMENT INDEX

61-00-65

Page 2-15
Rev. 18 Feb/16

TOOL AND EQUIPMENT MANUAL


165A

TE
NUMBER
TE495
TE496
TE497
TE498
TE499
TE500
TE501
TE502
TE503
TE504
TE505
TE506
TE507
TE508
TE509
TE510
TE511
TE512
TE513
TE514
TE515
TE516
TE517
TE518
TE519
TE520
TE521
TE522
TE523
TE524
TE525
TE526
TE527
TE528
TE529
TE530
TE531
TE532
TE533
TE534
TE535
TE536
TE537
TE538
TE539

PART NUMBER
104287
104371
104372
104374
M22520/37-01
BST-3076
BST-3077-1
104933
104811
105189
105190
104507
104504
104798
105167
104506
BST-2975-21
BST-2975-22
BST-2975-23
BST-2975-24
BST-2975-25
BST-3075
105266
105269
BST-2912-20
BST-2912-21
BST-3004-21A
BST-3004-21B
BST-3004-22A
BST-3004-22B
BST-3004-23A
BST-3004-23B
BST-3004-24A
BST-3004-24B
BST-3004-25A
BST-3004-25B
105274
Contact Hartzell
102560
105478
104052
BST-2912-19
102515
102516
105501

DESCRIPTION
Torque Wrench
Stand Adapter
Drive Housing Adapter
Roughness Standard
Crimp Tool
Calibration Standard
Eddy Current Probe
Fitting Wrench
Spacer Blank
Bearing Assembly Tool
Clamp
Leak Check Manifold
Adapter
Check Cylinder
Check Cylinder
Plug Assembly
Fit Check Tool
Fit Check Tool
Fit Check Tool
Fit Check Tool
Fit Check Tool
Double Shoulder Blade Eddy Current Kit
Torque Unit Adapter
Torque Unit Adapter
Hovercraft 5-Way Adapter
Hovercraft 6-Way Adapter
Template
Template
Template
Template
Template
Template
Template
Template
Template
Template
Balance Adapter
Bantam Blade Spud Adapter
Leak Detector Kit
Blade Adapter Service Tool
Drill Jig for N7605 Shank
H, T, Q, and G Flange Spindle

Shank Spacer Puller


Shank Spacer Puller
Blade Inspection Adapter

TOOL AND EQUIPMENT INDEX

VENDOR

PAGE

CS
MF
MF
MF
CS
HP
CS
CS
CS
CS
CS
CS
CS
HP
CS
CS
HP
HP
HP
HP
HP
HP
CS
CS
CS
CS
HP
HP
HP
HP
HP
HP
HP
HP
HP
HP
HP
HP
HP
HP
HP
HP
CS
CS
CS

4-134
4-134
4-135
4-135
4-136
4-136
4-137
4-137
4-138
4-139
4-139
4-140
4-140
4-141
4-141
4-142
4-39
4-39
4-39
4-39
4-39
4-143
4-144
4-144
4-145
4-145
4-42
4-42
4-42
4-42
4-42
4-42
4-42
4-42
4-42
4-42
4-146
4-146
4-147
4-147
4-148
4-26
4-149
4-149
4-157

61-00-65

Page 2-16
Rev. 18 Feb/16

TOOL AND EQUIPMENT MANUAL


165A

TE
NUMBER
TE540
TE541
TE542
TE543
TE544
TE545
TE546
TE547
TE548
TE549
TE550
TE551
TE552
TE553
TE554
TE555
TE556
TE557
TE558
TE559
TE560
TE561
TE562
TE563
TE564
TE565
TE566
TE567
TE568
TE569
TE570
TE571
TE572

PART NUMBER
103454
BST-2974-5
BST-2974-6
BST-2974-8
BST-2974-9
BST-2974-10
BST-2974-11
105615
105532
BST-2975-15
BST-2912-22
AST-2877-2
BST-2975-26
BST-2975-27
BST-2975-30
BST-2975-31
BST-2975-32
BST-2975-33
BST-2975-34
105702
BST-2975-28
BST-2975-35
BST-2975-36
BST-3004-28A
BST-3004-28B
BST-3004-35A
BST-3004-35B
106221
105236
106415
106450
BST-3004-30A
BST-3004-30B

DESCRIPTION

Stud Preload Plate


Erosion Shield Bonding Clamp
Erosion Shield Bonding Clamp
Erosion Shield Bonding Clamp
Erosion Shield Bonding Clamp
Erosion Shield Bonding Clamp
Erosion Shield Bonding Clamp
Valve Assembly Check Tool
Bantam Spring Compressor
Fit Check Tool
"F" Flange Bantam Adapter Ring
Torque Wrench Adaptor
Fit Check Tool
Fit Check Tool
Fit Check Tool
Fit Check Tool
Fit Check Tool
Fit Check Tool
Fit Check Tool
Right Angle Grease Coupler
Fit Check Tool
Fit Check Tool
Fit Check Tool
Template
Template
Template
Template
Extended Socket
Air Check Block
"D" Outer Shank Optical Comparator Overlay
Nut Tube
Template
Template

TOOL AND EQUIPMENT INDEX

VENDOR

PAGE

CS
HP
HP
HP
HP
HP
HP
CS
HP
HP
HP
HP
HP
HP
HP
HP
HP
HP
HP
HP
HP
HP
HP
HP
HP
HP
HP
HP
HP
HP
HP
HP
HP

4-150
4-38
4-38
4-38
4-38
4-38
4-38
4-149
4-150
4-39
4-26,4-153
4-6
4-39
4-39
4-39
4-39
4-39
4-39
4-39
4-153
4-39
4-39
4-39
4-42.1
4-42.1
4-42.1
4-42.1
4-154
4-154
4-88
4-155
4-42.1
4-42.1

61-00-65

Page 2-17
Rev. 18 Feb/16

TOOL AND EQUIPMENT MANUAL


165A

(This page is intentionally blank.)

TOOL AND EQUIPMENT INDEX

61-00-65

Page 2-18
Rev. 18 Feb/16

TOOL AND EQUIPMENT MANUAL


165A

Tool Kit
Part Number:

A-2334 (TE82)

Description:

Kit to prepare facilities for erosion shield replacement on composite blades.


The kit contains the following:

Vendor

Vendor P/N

Hartzell P/N

Description

Qty/Size

VR

54976-029

796514021 (TE81)

Vacuum Pump

VR

55007-020

79651417A (TE132)

Filter

PE

6X547

79656547A (TE135)

Timer, 12-hour

VR

54996-252

79651407K (TE147)

Vacuum Oil

5 gallons

CP

YA-6407-02

796540702 (TE156)

Vacuum Hose

(6 ea.) 10 feet

JC

1009A

79651009A (TE158)

Vacuum Gauge

CP

YA-6392-21

7965639221 (TE160)

Vacuum Fitting

Plastic Wedge
Part Number:

AST-2802 (TE138)

Description:

Wedge to aid in separating the hub halves of an aluminum hub propeller


without scarring the mating surfaces.

TOOL AND EQUIPMENT LIST

61-00-65

Page 4-1
Rev. 12 Aug/11

TOOL AND EQUIPMENT MANUAL


165A

Ring Centering Tool


Part Number:

AST-2803 (TE17)

Description:

Tool to keep internal rings in alignment. Used during assembly of oil


transfer unit for A-224-2 Seal in propeller model HC-A2X20-4( )2.

Torque Wrench Adaptor


Part Number:

AST-2805 (TE139)
AST-2805-2 (TE139-2)

K flange steel hub propellers


D flange propellers

Description:

Wrench to tighten and torque mounting bolts on propellers. Used


in conjunction with a standard 1/2 inch square drive torque wrench.

TOOL AND EQUIPMENT LIST

61-00-65

Page 4-2
Rev. 18 Feb/16

TOOL AND EQUIPMENT MANUAL


165A

Probe and Probe Holder


Part Number:

AST-2857 (TE94)

Description:

Part of Eddy Current Instrument used to inspect Y shank aluminum blade


retention radius.
APS-381

Block

Area to be
Inspected

Probe

Hub Bearing Radius Comparator


Part Number:

AST-2870 (TE27)

Description:

Comparator to ensure proper fit of blade retention bearing into D or Y


shank hubs.

APS-155

TOOL AND EQUIPMENT LIST

61-00-65

Page 4-5
Rev. 12 Aug/11

TOOL AND EQUIPMENT MANUAL


165A

Torque Wrench Adaptor


Part Number:

Description:

AST-2877 (TE5)

5/8 inch

Used for lightweight turbine propellers


that use 5/8 -18, 12 point propeller
mounting bolt.

AST-2877-1 (TE155)

11/16 inch

Used for dual acting and light weight


turbine propellers that use
mounting nut C-6006.

AST-2877-2 (TE551)

11/16 inch

Used for HC-E4P-3K and HC-E5P-3


installation only.

Wrench adaptor to install and torque mounting bolts. Used in conjunction


with a standard 1/2 inch square drive torque wrench.
Propeller
Mounting Flange

Standard Torque
Wrench

Propeller
Mounting
O-ring

Mounting
Bolt

APS-543

Aircraft Engine
Mounting Flange

Torque Wrench Adaptor AST-2877-( )

Torque Wrench Adaptor


Part Number

AST-2917 (TE152)

Description

Wrench to tighten and torque propeller mounting bolts on K flange


propellers. Used in conjunction with a standard 1/2 inch square drive
torque wrench.

Supersedes:

A-1327

TOOL AND EQUIPMENT LIST

61-00-65

Page 4-6
Rev. 18 Feb/16

TOOL AND EQUIPMENT MANUAL


165A

Profilometer
Part Number:

AST-3475 (TE436), AST-3475-1 (TE436-1)

Description:

Used to measure surface finish in the radius and transition areas of


aluminum blade shanks. Probe Housing Component BST-3227 (TE437)
is available for use with the Hartzell Propeller Inc. and Mahr Federal
models. Stand Adapter 104371 (TE496) and Drive Housing Adapter 104372
(TE497) are available for use with the Mahr Federal Model as an alternate
to BST-3227. Use of Stand Adapter 104371 (TE496) and Drive Housing
Adapter 104372 (TE497) connect the drive unit to a standard height stand
(customer procured) without the use of BST-3227 (TE437).

Hartzell Propeller Inc. Approved Alternates:


Vendor Part Number

Vendor

AST-3475 (TE436)

Perthometer 6910431

Mahr Federal Inc. (MH)

AST-3475 (TE436)

Perthometer 6910134

Mahr Federal Inc. (MH)


(no longer available)

AST-3475 (TE436)

Perthometer 6910135

Mahr Federal Inc. (MH)


(no longer available)

AST-3475 (TE436)

Surftest SV-600 series

Mitutoyo America Corporation (MT)


(no longer available)

AST-3475-1 (TE436-1)

MarSurf PS1-1 6910214

Mahr Federal Inc. (MH)


(No alternatives are approved)

Perthometer 6910431
AST-3475 (TE436)
Mahr Federal Inc. (MH)

TOOL AND EQUIPMENT LIST

MarSurf PS1 6910214


AST-3475-1 (TE436-1)
Mahr-Federal Inc. (MH)

61-00-65

TI-165005
TI-165AST3475

Part Number

Page 4-15
Rev. 18 Feb/16

TOOL AND EQUIPMENT MANUAL


165A

Flatness Gauge
Part Number:

BST-2811 (TE321)

Description:

Flatness gauge for steel hub flanges.

Counterweight Clamp Gauge


Part Number:

BST-2812 (TE60)

Description:

Gauge to locate D-1209 Counterweight Clamp on A10460E Composite


Blade.

Supersedes:

BG-3445

TOOL AND EQUIPMENT LIST

61-00-65

Page 4-16
Rev. 12 Aug/11

TOOL AND EQUIPMENT MANUAL


165A

Shot Peen Plug


Part Number:

BST-2938 (TE87)

Description:

Plug to mask the blade bore prior to shot peening on Y shank blades.

Piston Installation Socket


Part Number

TE Number

Description

BST-3067

TE228

Modified socket to install and remove piston on


D-6071 and D-494 pitch change rods.

BST-3067+3

TE228-1

Modified socket to install and remove piston on


D-3657 and D-7412 pitch change rods.

TOOL AND EQUIPMENT LIST

61-00-65

Page 4-29
Rev. 18 Feb/16

TOOL AND EQUIPMENT MANUAL


165A

Shot Peen Plug


Part Number:

BST-2939N (TE89)

Description:

Plug to mask the blade bore prior to shot peening on M and T shank
blades, with N modifications.

Shot Peen Plug


Part Number:

BST-2940 (TE90)

Description:

Plug to mask the blade bore prior to shot peening on E shank blades.

TOOL AND EQUIPMENT LIST

61-00-65

Page 4-30
Rev. 12 Aug/11

TOOL AND EQUIPMENT MANUAL


165A

Pitch Angle Stop Plug


Part Number:

BST-2958 (TE86)

Description:

Plug to block the end of the pitch change rod to allow actuation of the propeller
on the bench.

Hoist Ring Combo


Part Number:

BST-2958L (TE62)

Description:

Combination tool to lift and move propellers. Also, to seal the end of pitch
change rods and actuation of propellers on the bench.

TOOL AND EQUIPMENT LIST

61-00-65

Page 4-35
Rev. 12 Aug/11

TOOL AND EQUIPMENT MANUAL


165A

Alignment Check Rod


Part Number:

BST-2959 (TE114)

Description:

Rod to check concentricity of the inner threads of the B-3018 or B-1948 Rod.

Supersedes:

B-1509

Digital Protractor
Part Number:

BST-2960-3 (TE97)

Description:

Protractor to measure blade angles. May be used to check angles with


propeller installed on engine. Protractor includes protractor case.

Supersedes:

BST-2960-1, BST-2960-2, BST-2820, PE 105 (TE96), 799200105 (TE96),


and CST-2880

BST-2960
APS0336

NOTE: Locally procured and calibrated bubble protractor accurate to within


0.1 degree may be used and is considered equivalent.

Protractor Case

TOOL AND EQUIPMENT LIST

61-00-65

Page 4-36
Rev. 18 Feb/16

TOOL AND EQUIPMENT MANUAL


165A

Fit Check Tool


Part Number:
BST-2975 (TE171)
BST-2975-1 (TE172)
BST-2975-2 (TE173)
BST-2975-3 (TE174)
BST-2975-4 (TE175)
BST-2975-6 (TE177)
BST-2975-7 (TE178)
BST-2975-9 (TE180)
BST-2975-10 (TE340)
BST-2975-12 (TE377)
BST-2975-13 (TE378)
BST-2975-14 (TE480)
BST-2975-15 (TE549)
BST-2975-16 (TE481)
BST-2975-17 (TE482)
BST-2975-18 (TE483)
BST-2975-19 (TE484)
BST-2975-20 (TE485)
BST-2975-21 (TE511)
BST-2975-22 (TE512)
BST-2975-23 (TE513)
BST-2975-24 (TE514)
BST-2975-25 (TE515)
BST-2975-26 (TE552)
BST-2975-27 (TE553)
BST-2975-28 (TE560)
BST-2975-30 (TE554)
BST-2975-31 (TE555)
BST-2975-32 (TE556)
BST-2975-33 (TE557)
BST-2975-34 (TE558)
BST-2975-35 (TE561)
BST-2975-36 (TE562)

Description:

Blade
LM10585AN+4
M10877
M10083
B7421
A10460E
E11990
E10950
E12902
E13890K
7890K
7690E
N7605 & N7605C
E9193( )
N7893
N7605-2
N7605+2
N7605-4
NC9208
N(C,G)8301
NC8834
(H)79A06
(L,J)76A01-2
(H)75A01-2
NG8301-5
NC8301-7
NC10245
108MH92
138MH91
NG8301-1
NG8301-3
E8190
78D01
L75A01-2

Erosion Shield Reference


D-5019
D-5003
D-5013
D-5069
D-5059
D-5072
D-5133
D-2833
D-6221
D-6763
D-6015-2
101622
100515
101181
101622-2
101622+2
101622-4
102227
104595
104926
100503
104639
104772-2
104595-5
104595-7
105625
D-6221-1
105448
104595-1
104595-3
D-4786
105966
104772-2L

Tool to check fit of erosion shield before installation on composite blades.

TOOL AND EQUIPMENT LIST

61-00-65

Page 4-39
Rev. 18 Feb/16

TOOL AND EQUIPMENT MANUAL


165A

Drill Jig
Part Number:

BST-2982 (TE75)

Description:

Drill jig for N flange slimsert installation.

Drill Jig
Part Number:

BST-2983 (TE76)

Description:

Drill jig for F flange slimsert installation.

TOOL AND EQUIPMENT LIST

61-00-65

Page 4-40
Rev. 12 Aug/11

TOOL AND EQUIPMENT MANUAL


165A

Alignment Check Rod


Part Number:

BST-2984 (TE115)

Description:

Rod to check concentricity of internal threads of D-494 Pitch Change Rod.

Bearing Installation Tool


Part Number

TE Number

Description

BST-2985

TE64

Tool to install the blade alignment bearings in


T and M shank blades with N modification.
Used in conjunction with customer supplied
hydraulic or pneumatic press.

BST-2985-1

TE64-1

Tool to install the blade alignment bearings in


R and W shank blades with N modification.
Used in conjunction with customer supplied
hydraulic or pneumatic press.
BST-2985,-1

BST-2985

BST-2985-1

TOOL AND EQUIPMENT LIST

61-00-65

Page 4-41
Rev. 12 Aug/11

TOOL AND EQUIPMENT MANUAL


165A

Template
Part Number:

BST-3004 (TE219)
BST-3004-1A (TE220)
BST-3004-1B (TE221)
BST-3004-2A (TE222)
BST-3004-2B (TE223)
BST-3004-3A (TE224)
BST-3004-3B (TE225)
BST-3004-4A (TE226)
BST-3004-4B (TE227)
BST-3004-6A (TE230)
BST-3004-6B (TE231)
BST-3004-7A (TE232)
BST-3004-7B (TE233)
BST-3004-9A (TE236)
BST-3004-9B (TE237)
BST-3004-10A (TE335)
BST-3004-10B (TE336)
BST-3004-11A (TE337)
BST-3004-11B (TE338)
BST-3004-12A (TE461)
BST-3004-12B (TE462)
BST-3004-13A (TE463)
BST-3004-13B (TE464)
BST-3004-14A (TE465)
BST-3004-14B (TE466)
BST-3004-15A (TE467)
BST-3004-15B (TE468)
BST-3004-16A (TE469)
BST-3004-16B (TE470)
BST-3004-19A (TE471)
BST-3004-20A (TE472)
BST-3004-20B (TE473)
BST-3004-21A (TE521)
BST-3004-21B (TE522)
BST-3004-22A (TE523)
BST-3004-22B (TE524)

48 inch station of LM10585


42 inch station of M10877
52 inch station of M10877
39.75 inch station of M10083
47.25 inch station of M10083
30 inch station of B7421
34 inch station of B7421
30 inch station of A10460
48 inch station of A10460
42 inch station of E11990
54 inch station of E11990
42 inch station of E10950
51 inch station of E10950
54 inch station of E12902
60 inch station of E12902
54 inch station of E13890
60 inch station of E13890
30 inch station of E7690
36 inch station of E7690
30 inch station of 7890
36 inch station of 7890
30 inch station of E8190
30 inch station of E8190
30 inch station of E9193
40 inch station of E9193
30 inch station of N7605
36 inch station of N7605
30 inch station of N( )7893
36 inch station of N( )7893
24 inch station of N7605-4
30 inch station of NC9208
42 inch station of NC9208
30 inch station of NG8301
36 inch station of NG8301
30 inch station of NC8834
36 inch station of NC8834

TOOL AND EQUIPMENT LIST

61-00-65

Page 4-42
Rev. 18 Feb/16

TOOL AND EQUIPMENT MANUAL


165A

Template (Con't.)
BST-3004-23A (TE525)
BST-3004-23B (TE526)
BST-3004-24A (TE527)
BST-3004-24B (TE528)
BST-3004-25A (TE529)
BST-3004-25B (TE530)
BST-3004-28A (TE563)
BST-3004-28B (TE564)
BST-3004-30A (TE571)
BST-3004-30B (TE572)
BST-3004-35A (TE565)
BST-3004-35B (TE566)

30 inch station of ( )79(A/B)06


36 inch station of ( )79(A/B)06
30 inch station of ( )76(A/B)01-2
36 inch station of ( )76(A/B)01-2
30 inch station of ( )75(A/B)01-2
36 inch station of ( )75(A/B)01-2
24 inch station of NC10245
42 inch station of NC10245
24 inch station of 108MH92
48 inch station of 108MH92
24 inch station of 78D01
36 inch station of 78D01

Description:

Tool to check stations of composite blades.

BST-3004

Part Number:

TOOL AND EQUIPMENT LIST

61-00-65

Page 4-42.1
Rev. 18 Feb/16

TOOL AND EQUIPMENT MANUAL


165A

(This page is intentionally blank.)

TOOL AND EQUIPMENT LIST

61-00-65

Page 4-42.2
Rev. 18 Feb/16

TOOL AND EQUIPMENT MANUAL


165A

Thread Insert Removal Tool


Part Number:

Description:

BST-3019 (TE112)

Tool to remove B-1243 threaded staked insert.

BST-3019-3 (TE112-1)

Tool to remove B-1243-1 threaded staked insert.

BST-3019-4 (TE112-3)

Tool to remove B-6143-4 threaded staked insert.

BST-3019-7 (TE112-5)

Tool to remove B-6143-7 threaded staked insert.

BST-3019-8 (TE112-4)

Tool to remove B-6143-8 threaded staked insert.

Blade Assembly Support Stand


Part Number:

BST-3024 (TE126)

Description:

Stand to support blade in hub during HD-E6C-3 or HC-E4N-3A propeller


assembly.

TOOL AND EQUIPMENT LIST

61-00-65

Page 4-43
Rev. 18 Feb/16

TOOL AND EQUIPMENT MANUAL


165A

Bearing Press
Part Number:

BST-3026-1 (TE238)
BST-3026-2 (TE239)
BST-3026-3 (TE240)

1.000 inch O.D.


1.500 inch O.D.
1.625 inch O.D.

Description:

Press used to install bearings into bearing carriers or housings during


assembly of HD-E6C-3 propeller or PCU.

Modified Crowfoot
Part Number:

BST-3027 (TE40)

Description:

Modified 15/16 inch, 3/8 inch drive crowfoot wrench.

TOOL AND EQUIPMENT LIST

61-00-65

Page 4-44
Rev. 12 Aug/11

TOOL AND EQUIPMENT MANUAL


165A

Blade Pitch Fixture


BST-3226 (TE438)

Description:

Tool that attaches to the blade for blade angle check.

TI-BST-3226

Part Number:

Probe Housing Component


BST-3227 (TE437)

Description:

Used to support the probe of the profilometer when performing the surface
finish inspection in the radius and transition areas of aluminum blade shanks.
Used with AST-3475 (TE436) (MH), as necessary.

BST-3227

Part Number:

TOOL AND EQUIPMENT LIST

61-00-65

Page 4-79
Rev. 18 Feb/16

TOOL AND EQUIPMENT MANUAL


165A

Blade Seal Alignment Tool


Part Number:
BST-3177 (TE440)

For four-bladed lightweight turbine propellers

BST-3063 (TE440-1)

For five-bladed lightweight turbine propellers

Description:

Used during assembly to aid installation of the blade seal.


BST3177

Composite Balance Tube Puller


Part Number:

BST-4114 (TE442)

Description:

Tool to remove composite blade balance tube.


BST4114

TOOL AND EQUIPMENT LIST

61-00-65

Page 4-80
Rev. 12 Aug/11

TOOL AND EQUIPMENT MANUAL


165A

Grease Seal Pressure Test Tool (Adapter)


Part Number:

BT-3838 (TE443)

Description:

Used with TE382 (DST-3146) Thread Gauge Airflow Kit to perform grease
seal pressure test.
NOTE: Use with O-rings C-3317-010-2 and C-3317-08-2, not supplied.
BT-3838

Grease Seal Pressure Test Tool


Part Number:

BT-3838-1 (TE443-1)

Description:

Used with TE382 or TE382-1 Thread Gauge Airflow Kit to perform grease
seal pressure test.
NOTE: BT-3838-1 (TE443-1) eliminates the need for using both the
CST-3117 Probe Assembly and BT-3838 (TE443) to check
grease seal pressure.
BT-3838-1A

TOOL AND EQUIPMENT LIST

61-00-65

Page 4-81
Rev. 15 Dec/13

TOOL AND EQUIPMENT MANUAL


165A

Pressure Check Tool


Part Number:

BST-7587 (TE441) ........ For K, R, L, and F flange


BST-7587-1 (TE441-1) .. For N, P, and W flange
BST-7587-2 (TE441-2) .. For Q, T, H, and G flange
BST-7587-3 (TE441-3) .. For A and B flange, except D-1066-1 hub with an
A flange
BST-7587-4 (TE441-4) .. For C flange
BST-7587-5 (TE441-5) .. For a D-1066-1 hub unit with an A flange.
Use with the BST-7587-3 pressure check tool.

Description:

Used to perform a leak inspection after repair of the pitch change rod bore of
an aluminum hub.
NOTE:

This part number may be used to order the drawing to allow for
local fabrication.

BST-7587
TI-165A-BST-7587-1
BST-7587-2
TI-165A-BST-7587-3
TI-165A-BST-7587-4
TI-165A-BST-7587-5

TOOL AND EQUIPMENT LIST

61-00-65

Page 4-82
Rev. 18 Feb/16

TOOL AND EQUIPMENT MANUAL


165A

Insert Installation Tool


Part Number:

BST-7588 (TE445)

Description:

Used to provide a location of depth of the flange mounting inserts during the
adhesive cure process.
This part number may be used to order the drawing to allow for
local fabrication.

BST-7588

NOTE:

(This space is intentionally blank.)

TOOL AND EQUIPMENT LIST

61-00-65

Page 4-82.1
Rev. 18 Feb/16

TOOL AND EQUIPMENT MANUAL


165A

(This page is intentionally blank.)

TOOL AND EQUIPMENT LIST

61-00-65

Page 4-82.2
Rev. 18 Feb/16

TOOL AND EQUIPMENT MANUAL


165A

Spring Compressor Fixture


Part Number:

CST-2914 (TE59)..... Cont

The following tooling is required in addition to the CST-2914 Spring Compressor Fixture
depending upon the type of Spring Assembly:
Spring Assembly

Base

Retainer

Guide Rod

831-46
831-47
831-48
831-50
831-51
831-52
831-53
831-54
831-55
831-56
831-57
831-58
831-59

BST-2890 (TE488)
BST-2890 (TE488)
BST-2894 (TE488-2)
BST-2894 (TE488-2)
BST-2894 (TE488-2)
BST-2890 (TE488)
BST-2894 (TE488-2)
BST-2894 (TE488-2)
BST-2890 (TE488)
BST-2890 (TE488)
BST-2890 (TE488)
BST-2890 (TE488)
BST-2890 (TE488)

BST-2895 (TE489)
BST-2895 (TE489)
BST-2895 (TE489)
BST-2895 (TE489)
BST-2896 (TE489-1)
BST-2899 (TE489-3)
BST-2895 (TE489)
BST-2896 (TE489-1)
BST-2896 (TE489-1)
BST-2897 (TE489-2)
BST-2895 (TE489)
BST-2896 (TE489-1)
BST-2895 (TE489)

BST-2903 (TE490-1)
BST-2902 (TE490)
BST-2904 (TE490-2)
BST-2903 (TE490-1)
BST-2903 (TE490-1)
BST-2905 (TE490-3)
BST-2907 (TE490-4)
BST-2904 (TE490-2)
BST-2903 (TE490-1)
BST-2902 (TE490)
BST-2903 (TE490-1)
BST-2903 (TE490-1)
BST-2904 (TE490-2)

Balance Arbor
Part Number:

CST-2919 (TE8)

Description:

Used to determine the location of the static balance weights on a completed


propeller assembly. Used with customer supplied balance units. Works with
2 to 5 bladed propellers with F, K, L, N and R flanges.

Supersedes:

CT-2210 and CSK-155


CST-2919

Includes
2 Flanges

TOOL AND EQUIPMENT LIST

61-00-65

Page 4-87
Rev. 15 Dec/13

TOOL AND EQUIPMENT MANUAL


165A

Optical Comparator Overlay


Part Number: CST-2923 (TE18)
D and Y Shanks
CST-2924 (TE19)
X, V and V with N modification Shanks
CST-2925 (TE20)
Z, W, T and S Shanks
CST-2926 (TE21)
M, R and P Shanks
CST-2989 (TE22)
E Shank
CST-10050 (TE373)
"MV" Shank
106415 (TE569)
"D" Outer Shank
Description:
A 14 inch (355.6 mm) clear overlay to check the condition and repairability
of an aluminum blade retention radius. Used with a locally procured optical
comparator. For the current revision level of each overlay, refer to the
Hartzell Propeller Inc. Aluminum Blade Overhaul Manual 133C (61-13-33)
or Hartzell Propeller Inc Composite Propeller Blade Maintenance
Manual 135F (61-13-35), as applicable.

Blade Retention Components Clamp


CST-2929 (TE25)

Description:

Clamp to hold the blade retention components onto the blade shank
for installation into the hub. Designed to fit A and E shank blades, and
N shank composite blades in lightweight compact hubs.

APS-162

Part Number:

TOOL AND EQUIPMENT LIST

61-00-65

Page 4-88
Rev. 18 Feb/16

TOOL AND EQUIPMENT MANUAL


165A

Adjustable Riser Fixture


CT-1075 (TE48)

Description:

Fixture to permit blade angle measurements during assembly. Used in


conjunction with a bench-top protractor. For propeller models with extended
hubs, adjust fixture to raise the mechanical bench top protractor TE96. A
fully collapsed to fully raised fixture adds from 2.00.inches (50.8 mm) to
4.1 inches (104.1 mm) of lift.

Riser Fixture
No. CT-1075

APS-159-1

Part Number:

(This space is intentionally blank.)

TOOL AND EQUIPMENT LIST

61-00-65

Page 4-95
Rev. 18 Feb/16

TOOL AND EQUIPMENT MANUAL


165A

Cylinder Cap
Part Number:

CST-3110 (TE380)

Description:

Cap used with the cylinder when installing the spring assembly in compact
aluminum, feathering -2 propellers.
APS-6263

Blade Angle Locating Fixture


Part Number:

CST-2969 (TE413)

Description:

Fixture to check blade-to-blade angular difference before final hub assembly.


CST2969A

TOOL AND EQUIPMENT LIST

61-00-65

Page 4-96
Rev. 12 Aug/11

TOOL AND EQUIPMENT MANUAL


165A

Eddy Current Test Instrument


Part Number:

ED-520 (TE133), ED-530 (TE134)

Vendor:

Magnaflux Corporation (MF)

Description:

Instrument to locate cracks and flaws in non-magnetic material (single


shoulder aluminum blade retention radii). Used in conjunction with the
following:
AST-2857 (TE94)
AST-2979 (TE121)
BST-2847 (TE128)
BT-1313(-)( ) (TE95)
BST-3069 (TE315)

Probe and Probe Holder for "Y" Shank Blade


Inspection
Test Specimen for Calibration
Probe Support
Eddy Current Probe Unit for Blade Balance Hole
Inspection
Eddy Current Fixture

TOOL AND EQUIPMENT LIST

61-00-65

Page 4-111
Rev. 12 Aug/11

TOOL AND EQUIPMENT MANUAL


165A

Thread Insert Installation Tool


Part Number:

KHT9000-9 (TE67)

Vendor:

ALATEC Products Corporation (AL)

Description:

Tool to assist in installing the thread insert into the pre-threaded hole and then
aid in driving in the locking tangs.

APS-147

Superseded by: BST-3047-( ) TE68-( )

Bench Top Blade Angle Protractor


Part Number:

Vendors

PE 105 (TE96)

Mausner Equipment Company, Inc. (MS) (No longer available)

799200105 (TE96)

Hartzell Propeller Inc. (No longer available)

Description:

Protractor to measure the blade angles of an assembled propeller while


installed on the bench. Used in conjunction with the CT-1075 Riser Fixture.
NOTE:

Locally procured and calibrated bubble protractor accurate to within


0.1 degree may be used and is considered equivalent.

Superseded by: BST-2960-3 TE97

APS-159-1

Bench Top Protractor

Riser Fixture
No. CT1075

TOOL AND EQUIPMENT LIST

61-00-65

Page 4-112
Rev. 18 Feb/16

TOOL AND EQUIPMENT MANUAL


165A

Crowfoot
Crowfoot 13/16 inch
Crowfoot 11/4 inch
Crowfoot 15/16 inch
Crowfoot 11/2 inch
Crowfoot 15/8 inch
Crowfoot 13/4 inch
Crowfoot 17/8 inch

Part Number:

SC038 (TE33)
SC040 (TE34)
SC042 (TE35)
SC048 (TE36)
SC052 (TE37)
SC056 (TE38)
SC060 (TE39)

Vendor:

Snap-On Tools Corporation (SO)

Description:

Used in conjunction with a 1/2 inch square drive torque wrench or breaker
bar for propeller assembly and disassembly.
APS-173

Apex Torqset Bit


Part Number:

170-1/4 (TE44)

Vendor:

APEX Products (AP)

Description:

Bit to remove, install and torque self-locking mounting screws.

APS-146

TOOL AND EQUIPMENT LIST

61-00-65

Page 4-113
Rev. 12 Aug/11

TOOL AND EQUIPMENT MANUAL


165A

Slimsert Installation and Removal Tool


Vendor: Fairchild Fasteners
Part Number

Hartzell Part Number

Description

SR25W4A (Rosan)
MR25W4A (McKinnon)
225-072722 (Acme)
SR43W4A (Rosan)
MR43W4A (McKinnon)
225-072734 (Acme) or
225-890028 (Acme)
SR50W4A (Rosan)
MR50W4A (McKinnon)
225-072738 (Acme) or
225-890051 (Acme)
SR56W4A (Rosan)
MR56W4A (McKinnon)
225-072742 (Acme) or
225-890053 (Acme)
SR19W4A (Rosan)
MR19W4A (McKinnon)
225-072718 (Acme)
SR16W4A (Rosan)
MR16W4A (McKinnon)
225-072714 (Acme)
SR37W4A (Rosan)
MR37W4A (McKinnon)
225-072730 (Acme) or
225-890031 (Acme)
SR31W4A (Rosan)
MR31W4A (McKinnon)
225-072726 (Acme)
SR14W4A (Rosan)
MR14W4A (McKinnon)
225-072710 (Acme)
SR11W4A (Rosan)
MR11W4A (McKinnon)
225-072706 (Acme)

BST-2930-1 (TE389-1)
(Supersedes TE389)

Used to install Slimsert-type threaded


inserts into 5/16-24 threaded holes

BST-2930-2 (TE389-2)
(Supersedes TE312)

Used to install Slimsert-type threaded


inserts into 1/2-20 threaded holes

BST-2930-3 (TE389-3)
(Supersedes TE313)

Used to install Slimsert-type threaded


inserts into 9/16-24 threaded holes

BST-2930-4 (TE389-4)

Used to install Slimsert-type threaded


inserts into 11/16-12 threaded holes

BST-2930-5 (TE389-5)
(Supersedes TE314)

Used to install Slimsert-type threaded


inserts into 1/4-28 threaded holes

BST-2930-6 (TE389-6)

Used to install Slimsert-type threaded


inserts into 12-28 threaded holes

BST-2930-7 (TE389-7)

Used to install Slimsert-type threaded


inserts into 7/16-20 threaded holes

BST-2930-8 (TE389-8)

Used to install Slimsert-type threaded


inserts into 3/8-24 threaded holes

BST-2930-9 (TE389-9)
(Supersedes TE353)

Used to install Slimsert-type threaded


inserts into 10-32 threaded holes

BST-2930

BST-2930-10 (TE389-10) Used to install Slimsert-type threaded


inserts into 8-32 threaded holes

TOOL AND EQUIPMENT LIST

61-00-65

Page 4-114
Rev. 18 Feb/16

TOOL AND EQUIPMENT MANUAL


165A

Composite E-shank Comparison Chart


Part Number:

GT-3669 (TE451)

Description:

Chart to check condition and repairability of composite blade retention


radius. Used in conjunction with a customer supplied optical comparator,
TE449, and TE450.
NOTE: This is a 14-inch diameter chart.
GT-3669

Tube Puller Assembly


Part Number:

101999 (TE452) (CS)

Description:

Tool used to pull the balance tube for the N-shank composite blade. This
part number may be used to order the drawing of the tube puller assembly
for local fabrication. Used with customer supplied press.
101999

TOOL AND EQUIPMENT LIST

61-00-65

Page 4-129
Rev. 12 Aug/11

TOOL AND EQUIPMENT MANUAL


165A

Balance Adapter
101923 (TE453)(CS)

Description:

Adapter used with the balance arbor for the N-shank composite blade.
Adapter Revision A used with the balance arbor for the Raptor composite
blade used on reciprocating or turbine engines. This part number may be
used to order the drawing of the balance adapter for local fabrication. Used
with customer supplied blade balancing equipment.

101923

Part Number:

Plug Puller
101781 (TE454)

Description:

Tool used to pull the blade plug for the N-shank composite blade. Used with
a customer supplied press.

101781

Part Number:

TOOL AND EQUIPMENT LIST

61-00-65

Page 4-130
Rev. 18 Feb/16

TOOL AND EQUIPMENT MANUAL


165A

Mandrel
103570 (TE456)(CS)

Description:

Adapter used with the N-shank composite blade. This part number may
be used to order the drawing of the mandrel for local fabrication.

103570

Part Number:

(This space is intentionally blank.)

TOOL AND EQUIPMENT LIST

61-00-65

Page 4-131
Rev. 18 Feb/16

TOOL AND EQUIPMENT MANUAL


165A

Torque Wrench Adapter


Part Number:

101939 (TE457)(CS)

Description:

Installation of the hub clamping bolts and nuts in 3-bladed compact


propellers with smooth forged hubs. Used with standard 3/8 inch square
drive torque wrench. This part number may be used to order the drawing of
the torque wrench adapter for local fabrication.
101939

(!24:%,,

&4 ,"3-!8

Shot Peen Plug


Part Number:

101060 (TE458)

Description:

Plug to mask the blade bore before shot peening on "P" shank, "R" shank,
"W" shank, and "Z" shank blades with "N" modification.
101060

TOOL AND EQUIPMENT LIST

61-00-65

Page 4-132
Rev. 12 Aug/11

TOOL AND EQUIPMENT MANUAL


165A

Shank Spacer Puller


Part Number:

102515 (TE537)

Description:

Tool for engaging the threaded bearing spacer in V, V/N, and MV blades to
pull out the spacer and the outboard bearing.
102515

Shank Spacer Puller


Part Number:

102516 (TE538)

Description:

Tool for engaging the threaded bearing spacer in P, R, P/N, M, T, Z/W, W,


M/N, and T/N blades to pull out the spacer and the outboard bearing.

102516

TOOL AND EQUIPMENT LIST

61-00-65

Page 4-149
Rev. 15 Dec/13

TOOL AND EQUIPMENT MANUAL


165A

Preload Stud Pl
103454 (TE540)

Description:

Used for the 103437 hub at overhaul to re-install the mounting studs
properly. Drawing available for local fabrication, not for sale.

103454

Part Number:

(This space is intentionally blank.)

TOOL AND EQUIPMENT LIST

61-00-65

Page 4-150
Rev. 18 Feb/16

TOOL AND EQUIPMENT MANUAL


165A

"F" Flange Bantam Adapter Ring


Part Number:

BST-2912-22 (TE550)

Description:

Adapter permits mating to the BST-2912-19 spindle so that the Bantam


spring compressor features will work. Used with TE536 BST-2912-19 Hub
Flange Spindle.
NOTE: This part number may be used to order the drawing of the
"F" Flange Bantam Adapter Ring to permit local fabrication.
TPI-BST-2912-22

Right Angle Grease Coupler


Part Number:

105702 (TE559)

Description:

Fits used between the counterweight and the lubrication fitting of the TBM
Socata 5-way Propeller, HC-E5N-3C. Provides 90 degree access.
Vendor

Vendor Part Number

MC

1091K61

OT

2322

TM

THX-418MD0213-4

AF

8034

SP

QCC-HTR

MA

GGA21600

SM

06135

LI

5883

TOOL AND EQUIPMENT LIST

61-00-65

Page 4-153
Rev. 17 Dec/14

TOOL AND EQUIPMENT MANUAL


165A

Extended Socket
Part Number:

106221 (TE567) For five-bladed light-weight turbine propellers

Description:

Modified extended socket used to torque the piston mounting nut against
the piston on lightweight turbine propellers.

Extended Socket
et
106221
TE567

Cylinder

TPI-165A-106221

Pitch Change
Rod

Piston

Air Check Block


105236 (TE568)

Description:

Used to provide a method to check the leak check manifold 104507 (TE506)
assembly and to provide a protective way to store the leak check
manifold 104507 (TE506) when not in use.

TPI-165-105236

Part Number:

TOOL AND EQUIPMENT LIST

61-00-65

Page 4-154
Rev. 18 Feb/16

TOOL AND EQUIPMENT MANUAL


165A

Tube Nut
106450 (TE570) For building the "G" flange propeller

Description:

Used to hold the propeller to the assembly table spindle and to protect the
threads of the captive fasteners within the spindle slots. Used with TE536
BST-2912-19 Hub Flange Spindle.

TPI-165A-106450

Part Number:

(This space is intentionally blank.)

TOOL AND EQUIPMENT LIST

61-00-65

Page 4-155
Rev. 18 Feb/16

TOOL AND EQUIPMENT MANUAL


165A

Blade Spud Adapter


Part Number:

101932 (TE455) (CS)

Description:

This part number may be used to order the drawing of the blade spud
adapter for local fabrication. Adapter used with a locally procured blade
spud inspection bench. Only use adapter 101932 (TE455) on composite
blades that have an integral pitch change knob.
105501 (TE539)

101932

Superseded by:

Blade Inspection Adapter


105501 (TE539)

Description:

This part number may be used to order the drawing of the adapter for local
fabrication. Adapter used with a locally procured blade spud inspection
bench. Use adapter 105501 (TE539) for any composite blade that needs
an adapter except for E, M, and B shank composite blades.

Supersedes:

101932 (TE455)

105501_

Part Number:

TOOL AND EQUIPMENT LIST

61-00-65

Page 4-156
Rev. 18 Feb/16

S-ar putea să vă placă și