Documente Academic
Documente Profesional
Documente Cultură
Adequate number of class rooms are available for conducting lectures and tutorials. There
are a total of 8 class rooms for conducting U.G classes (1st year, 2nd year, 3rd year and 4th
year). The class rooms are equipped with most modern LCD projectors which can be used
for Power point presentations and showing vides of interest. Conventional black boards
are also provided in every class room. Class rooms are spacious enough to accommodate
60 students and are well furnished and ensures proper circulation of fresh air and light
State of the art seminar halls are available which are made use for conducting lectures by
eminent persons from industry and academia
Class rooms are equipped with LCD projectors to aid multimedia presentations. Conventional
black /green boards are also provided.
The following table shows the details of class rooms available with the department
CLASS/LAB
STUDENTS
STRENGTH
118
124
121
ROOM NO
R 207 &
R 210
CC207&
CC209
CC307 &
CC309
AREA IN M2
DETAILS OF
FURNITURE
99
96
96
112
NBA- SAR
Faculty room -I
HOD Room
117
11
12
10
CC 407 & C
C409
CC 210
CC 310
CC 410
CC 314
99
120
120
120
21
Teaching Aids
Model of an IC engine
Model of hexagonal pyramid (for graphics)
Model of pentagonal pyramid (for graphics)
Model of square pyramid (for graphics)
Model of triangular pyramid (for graphics)
Model of cylindrical prism (for graphics)
Model of triangular prism (for graphics)
Model of square prism (for graphics)
Model of pentagonal prism (for graphics)
Model of hexagonal prism (for graphics)
Automobile parts (heat engine lab)
Model of intersections (for graphics)
Solid model of couplings (machine drawing)
Exclusive/shared
Exclusive
Exclusive
Exclusive
Exclusive
Exclusive
Exclusive
Exclusive
Exclusive
Exclusive
Exclusive
Exclusive
Exclusive
Exclusive
113
NBA- SAR
14
15
16
17
ASUS Netbooks
Model of screw threads
Model of nut threads
Multimedia projectors
8 nos-Exclusive
Exclusive
Exclusive
8 nos in each class
room + one LCD
projector exclusively
for department
6.2.2. Rooms equipped with white/black board, computer, internet, and other such
amenities/facilities (10)
(Instruction: Assessment based on the information provided in the preceding table)
All the faculty rooms are equipped with white board, Computer with internet facility and
telephone with intercom facility.
The entire campus is Wi-Fi enabled.
114
NBA- SAR
Room description
No
Classrooms
No. of tutorial
rooms
No. of meeting
rooms (04)
8
( Free
Class
rooms are
used
Shared/
Seating
exclusi Capacity
ve
66
Meetings
Shared
No. of seminar
rooms
Department
Library
Faculty room
HOD Room
66
Quality
Minimum
100 each
LCD projectors
Minimum
100 each
10
Staff rooms are made student friendly. Students are always welcome to approach the
faculty both for their academic as well as personal needs. Mentoring sessions are
115
NBA- SAR
held regularly in the staffrooms where students can approach their respective mentors
for guidance/counseling
Exclusive
use
/ shared
EN 010 105
Engineering Graphics
Exclusive
Exclusive
Space,
number of
students
Number of
experiments
Quality of
instruments
Laboratory
manuals
3 rooms have
seating capacity
of 60 and
remaining 2 have
120
4 lab rooms
having 15/ batch
10 sheets
Good
Available
Good
Available
Exclusive
30/batch
15
Good
Available
Exclusive
30/batch
16
Good
Available
Exclusive
60/batch
14
Good
Available
Exclusive
30/batch
Good
Available
Exclusive
30/batch
10
Good
Available
Exclusive
30/batch
12
Good
Available
Exclusive
30/batch
Good
Available
Exclusive
30/batch
15
Good
Available
Exclusive
4/batch
Good
Available
Exclusive
1 at a time
6.3.1. Ad equ ate , well-equipped laboratories to meet the curriculum requirements and
the POs (20)
(Instruction: Assessment based on the information provided in the preceding Table.)
116
NBA- SAR
All the labs are well equipped and well maintained. Maintenance and calibration of the
instrument is carried out as when necessary. Technical staff is well trained for the
maintenance and calibration of the instruments as and when necessary.
The following Table shows the equipment/instruments available in each lab to meet the
curriculum requirements and the POs
Sl. No
Name of Labs
Smithy
Mechanical
workshop
Fitting
Quantity
1
7
1
1
1
1
2
5
3set
6
6
2
1
3
2
8
5
4
2
10
2
2
7
2
3
25
10
6
pair 4
1
3
1
1
5
2
1
2
12
10
2
117
NBA- SAR
Foundry
Carpentry
Letter punch
Number punch
Hacksaw
Flat files (all dimensions)
Half round cut
Vernier and outside caliper
Round chisel
Square file 200mm
Flat chisel
Combination cutter plier
Twist drill set
Tap set M 8 x 1.25
Tap set M 6 x 1.00
Tap set M 10 x 1.5
Split die M 8 x 1.25
Split die M 10 x 1.5
Split die M 06 x 1
Die stock dia 40mm
Diamond point wheel dresser
Ball peen hammers (1.5lbs,1lb, 0.5lb)
Cross peen hammer
Mallet
Allen key 1 set
Vice
Grinder
Off set wrench
Double end spanner set
Molding flask
Molding board
Shovel
Floor Rammer
Hand Rammer
Riddle
Patterns- Step and core type
Strike off bar- wooden and aluminum
Trowels- Finishing and square
Slick
Mallet wooden
Lifter
Gate cutter
Runner, riser
Vent rod
Draw spike
Bellows
Plane
Saw
Vice
Chisel
File
Steel rule
G Clamp
Venturimeter
1
1
12
57
6
5
6
6
10
1
1
1
1
1
1
1
1
1
1
18
3
1
1
14
1
12
24
24 set
24
14
25
27
1
20 & 30
4 & 12
20 & 16
18
6
11
16
24
26
28
1
15
10
15
50
20
15
6
1
118
NBA- SAR
CAD/CAM lab
Orficemeter
Rectangular and triangular notch
Orifice
Metacentre
Bernoullis apparatus
1
1
1
1
1
1 each
Pelton turbine
Kaplan turbine
Francis turbine
Centrifugal pump
Jet pump
Gear pump
Self-priming pump
Multi centrifugal pump
Reciprocating pump
Hydraulic ram
Computers(with all softwares)
Heat transfer equipments
Engines
Blower
Compressor
Lathe
Shaper
Surface grinder
Milling machine
Slotting machine
Radial drilling machine
Sensitive drilling machine
Hand drill
Bench grinder
Welding set
Power saw
Hand grinder
Milling machine vice
Rotary table
Vertical attachment
Dividing head
Chuck with back plate
Rack cutting attachment
Reduction sleeve(iso40xmt2)
Collet holder(2 set)
Vernier caliper 6''
Micrometer (0-50mm)
Vernier dial gauge 200mm
Sine bar
Snap gauge double ended 75mm
Plain plug gauge 20mm
Clinometer (0 to360 degree)
Universal bevel protractor
Slip gauge- 87pieces
1
1
1
1
1
1
1
1
1
1
45
9
7
1
1
19
9
1
2
1
1
1
1
1
2
1
1
2
2
2
2
2
1
2
2
12
12
1
2
1
1
1
1
1set
119
NBA- SAR
Mechanical
measurements lab
7
8
Mechanical systems
lab
12
1
2
1
2
1
Trainers
Tester apparatus
Vibration measurement apparatus
Speed measurement apparatus
Roughness tester
Tool makers microscope
Profile projector
Universal vibration apparatus
Governors
Gyroscope
Whirling shaft
8
1
3
1
1
1
1
1
4
1
1
A computer lab with sufficient number of computers with high speed internet connectivity
is available for students use. Licensed software such as AUTO CAD, PRIMAVERA,
ABAQUS, ANSYS etc. are provided.
Computers
Computer Lab
70
Five user
Five user
Five user
Five user
120
NBA- SAR
The following Table shows the duties allotted for the technical staff to help the students
for doing experiments beyond working hours. Technical support will be available for
students from 8 am to 8 pm according to the requirement of the students
Name of
Designation Qualification
Technical staff
Responsibility
Thomas Joseph
Senior
workshop
instructor
DME
Vinu K Varghese
Workshop
instructor
Grade-1
ITI
Jiby Zacharias
Lab
instructor
DME
Ranjith V.K
Lab
instructor
Grade-1
DME
Balachandran
Lab
instructor
Grade 2
ITI
Jose Mathew
Workshop
instructor
NCTVT
Carpentry
workshop in
Charge
Thermal Lab in
charge
121
NBA- SAR
Anvin M. Mathew
Lab
instructor
grade 2
DME
T. A Abraham
Senior lab
Assistant
ITI machinist
Lab
Instructor
ITI,
Mechanical
refrigeration
& Air
conditioning
Dijo T Abraham
Name of Lab:
Sl.
No
Name of Experiment
Metacentric height and
radius of gyration of
floating body
Determination of Darcys
and Chezys constant for
pipe flow
Equipment/Instrument
used
No.of
Expt
set up
No of
Students
per Expt
set up
Remarks
Metacentre
Good
quality
Good
quality
Determination of minor
losses
Good
quality
Determination of
coefficient of discharge of
Venturimeter
Venturimeter
Good
quality
122
NBA- SAR
10
11
12
Determination of
coefficient of discharge of
Orficemeter
Determination of
coefficient of discharge of
mouthpiece by varying
head method
Bernoullis apparatus
Determination of
coefficient of discharge of
orifice plate by varying
head method
Constant head method for
determination of cd, cv &
cc of orifice plate
Constant head method for
determination of cd, cv &
cc of mouthpiece
Determination of
coefficient of discharge of
triangular notch
Determination of
coefficient of discharge of
Rectangular notch
Orficemeter
Good
quality
Mouthpiece
Good
quality
Bernoullis apparatus
Good
quality
Orifice plate
Good
quality
Orifice plate
Good
quality
Mouthpiece
Good
quality
Triangular notch
Good
quality
Rectangular notch
Good
quality
Equipment/Instrument
used
No.of
Expt
set up
No of
Students
per Expt
set up
Remarks
Pelton turbine
Good
Quality
Pelton turbine
Good
Quality
Kaplan turbine
Good
Quality
Kaplan turbine
Good
Quality
Francis turbine
Good
Quality
Francis turbine
Good
Quality
123
NBA- SAR
Performance test on
reciprocating pump
Reciprocating pump
Good
Quality
Self-priming pump
Good
Quality
Performance test on
centrifugal pump
centrifugal pump
Good
Quality
10
Jet pump
Good
Quality
11
Centrifugal pump
Good
Quality
12
Good
Quality
13
Comparison of
efficiencies with parallel
and series centrifugal
pumps.
Centrifugal pumps
Good
Quality
14
Hydraulic ram
Good
Quality
Name of Experiment
No. of
Equipment/Instrument
Expt
used
set up
Facing operation
Lathe
Lathe
Stepped turning
Lathe
Grooving
Lathe
Taper turning
Lathe
17
17
17
17
17
No of
Students
Remarks
per Expt
set up
2
Good
Quality
Good
Quality
Good
Quality
Good
Quality
Good
Quality
17
6
Form turning
Lathe
Thread cutting
Lathe
Knurling
Lathe
2
17
17
Good
Quality
Good
Quality
Good
Quality
124
NBA- SAR
Undercutting
Lathe
10
Lathe
11
Lathe
12
Welding
17
17
17
Good
Quality
Good
Quality
Good
Quality
Good
Quality
Name of Experiment
Equipment/Instrument
used
No.
of
Expt
set up
No of
Students
per Expt
set up
Remarks
Plain shaping
Shaper
Good
Quality
Square grooving
Shaper
Good
Quality
V-Grooving
Shaper
Good
Quality
Plain milling
Milling machine
Good
Quality
Step milling
Milling machine
Good
Quality
Gear cutting
Milling machine
Good
Quality
Slotting machine
Good
Quality
Drilling
Drilling machine
Good
Quality
Tapping
Drilling machine
Good
Quality
10
Surface grinding
Surface grinder
Good
Quality
125
NBA- SAR
11
Power saw
Good
Quality
Name of Experiment
Equipment/Instrument
used
No. of
Expt
set up
No of
Students
Remarks
per Expt
set up
Good Quality
Experiment on dead
weight pressure
gauge tester
Experiment on strain
measurement trainer
(cantilever beam)
Tester
Good Quality
Trainer
Good Quality
3
Experiment on
vibration
measurement trainer
Trainer
Good Quality
4
Experiment on
pressure
measurement trainer
Experiment on
proving ring with load
cell and dial gauge
Trainer
Good Quality
Trainer
Good Quality
Auto-Collimator
Good Quality
7
Experiment on
temperature
measurement trainer
Trainer
126
NBA- SAR
Good Quality
8
Experiment on speed
measurement trainer
Trainer
Good Quality
9
Experiment on tool
makers microscope
tool makers
microscope
Good Quality
10
Experiment on profile
projector
11
Experiment on
transverse vibration
apparatus
profile projector
Good Quality
trainer
Good Quality
12
Experiment on
Psychrometer for
WBT & DBT
Psychrometer
Good Quality
13
Experiment on
Vernier caliper and
micrometer
4 each
Good Quality
14
Experiment on load
measurement trainer
Trainer
Name of Experiment
Equipment/Instrument
used
No. of
Expt
set up
No of
Students
per Expt
set up
Remarks
Good
Quality
127
NBA- SAR
Best cooling
temperature on
diesel engine
Valve timing
diagram
Retardation test on
diesel engine
Volumetric
efficiency test on
single cylinder diesel
engine
10
Tests on
refrigeration
equipment to
determine the COP
11
Tests on Air
conditioning
equipment to
determine the COP
Cut section of an
engine
Refrigeration
equipment
Good
Quality
1
Good
Quality
Good
Quality
Good
Quality
Good
Quality
1
Good
Quality
Good
Quality
Good
Quality
1
Good
Quality
1
Good
Quality
Air conditioning
128
NBA- SAR
12
13
14
Determination of
thermal conductivity
of conducting and
insulating materials
Determination of
emissivity of
surfaces
15
16
Determination of
overall heat transfer
coefficient of a heat
exchanger
17
Determination of
heat transfer
coefficient in free
convection
18
Thermal conductivity
testing apparatus
Emissivity testing
apparatus
Good
Quality
1
Good
Quality
1
Good
Quality
Lagged pipe apparatus
Composite walls
apparatus
Experiment on
forced convection
Free convection
apparatus
Forced convection
Apparatus
Good
Quality
Good
Quality
1
Good
Quality
1
Good
Quality
1
Name of Experiment
Experiment on universal
vibration apparatus
No.
of
Equipment/Instrument
Expt
used
set
up
Torsional vibrational
apparatus
Longitudinal vibration
of spring mass system
No of
Students
Remarks
per Expt
set up
Good quality
instruments
129
NBA- SAR
Experiment on governor
apparatus
Porter governor
Proell governor
Hartnell governor
Watt governor
Good quality
instruments
Good quality
instruments
Experiment on
determining critical speed
whirling of shaft
apparatus
Good quality
instruments
Experiment on gyroscopic
effect
Gyroscope
Good quality
instruments
CLASS/LAB
STUDENTS
STRENGTH
ROOM NO
AREA IN
M2
Carpentry
20
WS 01
47m2
Foundary
20
WS 02
44m2
Fitting
20
WS 03
143m2
Smithy
20
WS 05
143m2
CCB 204
165m2
Hydraulics Lab
Measurements lab
30
30
30
30
CCB 204
CCB206
CC108
Well maintained
equipment, neat
and tidy,
spacious & well
ventilated room
Well maintained
equipment, neat
and tidy,
spacious & well
ventilated room,
220m2
Well maintained
equipment, neat
and tidy,
spacious & well
ventilated room,
630m2
Well maintained
equipment, neat
and tidy,
spacious & well
ventilated room
165m2
Well maintained
equipment, neat
and tidy,
spacious & well
ventilated room,
130
NBA- SAR
Mechanical Systems
lab
30
CC105
161m2
30
ME L01
ME L02
360m2
CAD/CAM lab
45
CCB 104
85m2
Well maintained
equipment, neat
and tidy,
spacious & well
ventilated room,
Well maintained
equipments,
neat and tidy,
spacious & well
ventilated room,
Well maintained
equipments,
neat and tidy,
spacious & well
ventilated room,
131
NBA- SAR
Workshop
instructor
Grade-1
03/01/200
Exclusive
3
Jiby
Zacharias
Lab
instructor
22/10/200
1
Exclusive
At
Joining
DME
ITI
DME
Now
Responsibilit
y
Vinu K
Varghese
Date of
joining
Exclusive
Exclusive /
shared work
Designation
Thomas
Joseph
Senior
workshop
instructor
Pay-scale
Name of the
technical staff
Qualification
Other
technical skills
gained
DME
Capable of
Foundry
doing all
workshop in
experiments
charge
in the lab
ITI
Capable of
Carpentry
doing all
workshop
experiments
in Charge
in the lab
DME
Capable of
Hydraulics
doing all
lab in
experiments
charge
in the lab
DME
Capable of
doing all
experiments
in the lab
Lab
Ranjith V.K instructor
Grade-1
02/08/200
Exclusive
5
Lab
Balachandra
instructor
n
Grade 2
10/08/200
Exclusive
6
Workshop
Jose Mathew
instructor
Capable of
Fitting
doing all
Exclusive 12/02/07 NCTVT NCTVT
Workshop
experiments
in charge
in the lab
Lab
instructor
grade 2
Capable of
Measureme
doing all
nts lab in
experiments
charge
in the lab
Anvin M.
Mathew
Senior lab
T.A Abrham
assistant
Dijo T
Abraham
Lab
Instructor
Exclusive
19/07/201
0
DME
ITI
DME
ITI
DME
Thermal
Lab in
charge
Capable of Advanced
doing all
Machine
experiments tool lab in
in the lab
charge
Capable of
ITI,
Machine
01/07/200 ITI,
doing all
Exclusive
machini
tool lab in
9
machinist
experiments
st
charge
in the lab
Exclusive
DME
DME
Capable of
Fluid
doing all
mechanics
experimen
lab in
ts in the
charge
lab
132
NBA- SAR
Qualified technical staff is available for all the labs as evidenced from the above Table
(Item 6.4)
(Instruction: Assessment based on the information provided in the preceding table.)
All the technical supporting staffs are encouraged to attend skill enhancement training
programs arranged by the Department or other institutes/industries
List of programs attended by technical staffs
Fitting & carpentry workshop.
Turning operation training for first years.
One week Auto CAD training for technical staffs.
Yearly induction and orientations programs conducted by college for all technical staffs.
133