Documente Academic
Documente Profesional
Documente Cultură
TOSHIBA for more than 80 years has offered surge arresters with continuously improved quality
standards and technologies ahead of prevalent times. With improved manufacturing technology
and strict quality control systems certified under ISO-9001, TOSHIBA developed Polymer Surge
Arresters which are widely used for their reliable performance.
~ 72.5kV
~ 145kV
~ 170kV
~ 245kV
Standard Ratings
IEC Line Discharge Class
Type
Maximum System Voltage
(kVrms)
Rated Voltage (Ur)
(kVrms)
Nominal Discharge Current
(kAcrest)
High Current Impulse Capability
(kAcrest)
Short-circuit Capability
(kArms)
Discharge Voltage Ratio
(V10kA/Ur)
Energy Absorption Capability *
(kJ/kV-Ur)
Class 2
RVLQD
3.6 - 170
3 150
RVLQC
3.6 - 245
3 - 210
10
100
65
2.45
6.0
2.60
4.5
Class 3
RVLQC
3.6 170
3 - 150
2.45
8.5
*) Energy absorption capability means the total dissipated energy per two shots
of switching surge that the surge arrester can thermally withstand.
RV
LQ
ZnO element
Family name
Pollution Level
PL
Polymer Type
Pollution Level
V
Very Heavy
H
Heavy
31 mm/kV
25 mm/kV
Test Examples
Accessories
Short-circuit Test
(Freezing)
Surge counters (SDC-N4 = Non ammeter type/ SDC-N4A = Ammeter attached type)
can be supplied upon the customers request.
Type
Indication of Counter
Minimum Operating Current
Maximum High Current
Withstand Capability
Residual Voltage at 100kA(4/10s)
Switching Impulse Current Withstand
Ammeter Scale
SDC-N4
SDC-N4A
6 digit cyclometer
at least 5 counts/sec.
30 A (8/20s)
100 kA (4/10s)
5kV peak and below
4000A X 2ms
0 5 mArms
-(linear scale)
SDC-N4
SDC-N4A
5605-3 0804G1