0 evaluări0% au considerat acest document util (0 voturi)
18 vizualizări2 pagini
This document outlines electrical regulations for fluorescent lamp fittings, including general purpose and industrial types. For general purpose fittings, it specifies that reflectors be of suitable metal or plastic material, with auxiliary equipment like chokes and condensers mounted in a dust-tight enclosure. Industrial type fittings must have a detachable dust proof box to house auxiliary equipment, with wiring run through heavy gauge steel conduit. Both types of fittings must have secure lamp holders and be properly earthed through an unbroken conductor.
This document outlines electrical regulations for fluorescent lamp fittings, including general purpose and industrial types. For general purpose fittings, it specifies that reflectors be of suitable metal or plastic material, with auxiliary equipment like chokes and condensers mounted in a dust-tight enclosure. Industrial type fittings must have a detachable dust proof box to house auxiliary equipment, with wiring run through heavy gauge steel conduit. Both types of fittings must have secure lamp holders and be properly earthed through an unbroken conductor.
This document outlines electrical regulations for fluorescent lamp fittings, including general purpose and industrial types. For general purpose fittings, it specifies that reflectors be of suitable metal or plastic material, with auxiliary equipment like chokes and condensers mounted in a dust-tight enclosure. Industrial type fittings must have a detachable dust proof box to house auxiliary equipment, with wiring run through heavy gauge steel conduit. Both types of fittings must have secure lamp holders and be properly earthed through an unbroken conductor.
ANNEXURE D FLUORESCENT LAMP FITTINGS D-1 General Purpose Type Fittings D-1.1
The general design of reflectors shall be of suitable type and
material. The material shall be of any suitable metal or plastic. If plastic of a combustible nature is used, it shall not be in contact with any electrical conducting part.
D-1.2
The auxiliary equipment, i.e. choke coil, power factor condenser
and starting unit (comprising thermal switch, radio suppressor condenser), shall comply with relevant Indian Standard Specifications and shall preferably be mounted on the lamp fitting itself, in a dust-tight enclosure; but if any item is mounted separately it shall be mounted on parts made of noncombustible material.
D-1.3
The wiring connections between the equipment, i.e. chokes and
condensers, shall be in vulcanised rubber insulated flexible cabling or approved PVC insulated wiring properly clamped as necessary.
D-1.4
The suspension shall be made by two conduits or rods or robust
chains, spaced to share equally the weight of the fitting.
D-1.5
The lamp or tube holders may be of plastic material provided
these are of efficient and approved design, and that each tube is securely held by suitable metal spring clips at each end.
D-1.6
Earthing of the fixture shall be made with an unbroken
conductor, the suspension chains (where employed) shall not be regarded as an approved means of earthing.
D-1.7
Fluorescent fixtures may be suspended from conduit wiring
junction boxes as a means to prevent exposure of conductors from the fitting to the wiring in the conduit. The connection inside the circular box shall be made to a porcelain junction base. Plain porcelain connectors shall not be permitted in the box.
D-2 Bombay Mill or Industrial Type Fittings
D-2.1
Mild steel trough enamelled or painted or other robust reflectors
shall be used which may have, if necessary; upward lighting slots.
D-2.2
The auxiliary equipment i.e. choke coil, power factor condenser
and starting unit (comprising thermal switch, radio-suppressor condenser) shall comply with relevant Indian Standards and shall be mounted on suitable frame work in a separate detachable dust proof non-ventilated box with tight fitting covers securely fixed by machine screws and bolts to the main trough.
D-2.3
The wiring connections between the equipment housed in the
choke and condenser box shall be vulcanized rubber insulated flexible cabling or approved PVC insulated conductors in heavy gauge, welded or solid drawn steel conduit, or run internally and properly clamped.
D-2.4
Suspension shall be made by two conduits spaced to share
equally the weight of the fitting. Each conduit rod shall be provided with a spring loaded ball and socket joint ceiling plate at the top and the other end bolted to the trough.
D-2.5
Lamp or tube holders shall be made of plastic, provided an
efficient and approved design is employed and each tube is held with suitable metal spring clips at each end.
D-2.6
Earthing of fixture shall be made with an unbroken conductor.
D-2.7
Fluorescent fixture may be suspended from conduit wiring
junction boxes as a means to prevent exposure of conductors from the fitting to the wiring in the conduit. The connection inside the circular box shall be made to a porcelain junction base. Plain porcelain connectors shall not be permitted in the box.
D-2.8
The chokes of all fluorescent fittings shall be mounted on
incombustible material.
D-2.9
Incoming twin twisted flexible conductor shall enter the side of
the box through a dust-tight bushed hole.
D-2.10 The lighting tubes and reflectors shall be kept clean
to obtain maximum efficient lighting. Cleaning shall be carried out by competent personnel.
The Complete HVAC BIBLE for Beginners: The Most Practical & Updated Guide to Heating, Ventilation, and Air Conditioning Systems | Installation, Troubleshooting and Repair | Residential & Commercial