Documente Academic
Documente Profesional
Documente Cultură
Document No.
LIPB
7043125SH1-SP1-R&D-77G
Date
2016-04-1
PRODUCT SPECIFICATION
Racing Competition Purpose
Rechargeable Lithium Ion Polymer Battery
Model: 7043125SH1-SP1-R&D-77G
1st Issue date : 2016/04/01
by
Rev. 0.0
Description
Lithium Ion Polymer battery
7043125SH1-SP1-R&D-77G
Document No.
LIPB
7043125SH1-SP1-R&D-77G
Date
2016-04-1
1.
Scope
This specification is applied to Lithium Ion Polymer Battery produced by NOMURA CO.,
2.
2.1
2.2
Model
3.
Ratings
7043125SH1-SP1-R&D-77G
Item
Rating
Nominal
5500mAh
Minimum
5400mAh
3.1 Capacity
3.65V
0.25C / 4.30V
1.0C
4.35V
3.11 Storage
Temperature
2.75V
Around 3.90V
77.0g
Charge
Discharge
1.0C (constantly)
Note
3.10 Operating
Temperature
Rev. 0.0
0~45
90%RH Max.
-20~60
90%RH Max.
1 month
0~50
3 month
0~35
1 year
0~20
Recommended storage
temperature: 25 or less,
at the shipment state
Description
Lithium Ion Polymer battery
7043125SH1-SP1-R&D-77G
Document No.
LIPB
7043125SH1-SP1-R&D-77G
4.
4.1
Outline Dimensions
See attached drawing for 7043125SH1-SP1-R&D--77G (Fig.1).
Thickness
Width
Length
7.0mm
43.0mm
125.0mm
Date
2016-04-1
Rev. 0.0
Note: This thickness will be swelling when high temperature storage, operation in high temperature, and
damaged cell also
4.2
5.
Appearance
There shall be no such defect as remarkable scratches, breaks, crack, discoloration, leakage, or deformation,
which may adversely affect commercial value of the cell.
Performance
5.1
5.2
Measuring
Item
Voltage
Current
Time
tolerance
0.2
0.1
Description
Lithium Ion Polymer battery
7043125SH1-SP1-R&D-77G
Document No.
LIPB
7043125SH1-SP1-R&D-77G
Date
2016-04-1
Rev. 0.0
Rest Period
Unless otherwise defined, 10min rest period after full charge, 10min rest period after discharge.
Note: we recommend NO long keep or storage at full charge condition.
5.5
5.6
Test Condition
Criteria
Open-Circuit
Voltage
4.30V or more
AC Impedance
Resistance
10.0m or less
(bare cell)
Initial Capacity
98% of nominal
or more
5.7
Electrical Performance
Discharge Current
0.5C
1.0C
Discharge Capacity
100%
90% or more
Discharge Temperature
-20
23
60
Discharge Capacity
60% or more
80% or more
100%
95% or more
Description
Lithium Ion Polymer battery
7043125SH1-SP1-R&D-77G
5.7.3
Document No.
LIPB
7043125SH1-SP1-R&D-77G
Date
2016-04-1
Rev. 0.0
Cycle Life
Cells shall be charged at constant current of 0.25C to 4.30V with end current of 0.03-0.01C.
Cells shall be discharged at constant current of 0.5C to 2.75V. Cells are to be rest 10minutes.After charge
and 10minutes after discharge.
A cycle is defined as one charge and one discharge. The capacity shall be measured after 15 cycles of charge
and discharge at 232.
Discharge capacity (15th cycle) 95% 3rd cycle discharge (or more) capacity.
5.7.4
Shelf Life
Item
Test Condition
Criteria
Remaining Capacity
85% Initial capacity
Recovery capacity
90% Initial capacity
Remaining Capacity
85% Initial capacity
Recovery capacity
90% Initial capacity
Storage
Characteristics
Storage
Characteristics
Description
Lithium Ion Polymer battery
7043125SH1-SP1-R&D-77G
5.8
Document No.
LIPB
7043125SH1-SP1-R&D-77G
Date
2016-04-1
Rev. 0.0
Test Condition
After standard charge,
cells are to be tested as following conditions:
Amplitude : 0.8mm
Frequency : 10~55Hz(sweep:1Hz/min)
Direction : X/Y/Z axis for 90~100min.
Vibration Test
Criteria
no explosion,
no fire,
no smoke.
Drop Test
Drop cells in the shipment condition (50% charge) from 1.2m height onto
5cm or thicker concrete with p-tile on it
3times each of X, Y, and Z directions at 232.
no explosion,
no fire,
no smoke.
Overcharge Test
no explosion,
no fire,
no smoke.
Heating Test
no explosion,
no fire,
no smoke.
External
Short- Circuit Test
no explosion,
no fire,
no smoke.
Impact Test
After standard charge, cells are impacted with their longitudinal axis parallel
to the flat surface and perpendicular to the longitudinal axis of the 15.8mm
diameter bar.
no explosion,
no fire,
no smoke.
Crush Test
6.
After standard charge, cells are crushed with their longitudinal axis parallel
to the flat surface of the crushing apparatus.
Period of Warranty
There is no available any kind of warranty due to racing competition purpose battery.
7.
Shipment
Cells shall be shipped in about 50% state of charge.
no explosion,
no fire,
no smoke.
Description
Lithium Ion Polymer battery
7043125SH1-SP1-R&D-77G
Document No.
LIPB
7043125SH1-SP1-R&D-77G
Date
2016-04-1
Rev. 0.0
Liabilities
The user has to operate the products according to the instructions manual or specification document of the
battery cell which is published by NOMURA CO., In case the battery were overheated or even catch fire or
explosion caused by mishandling of the user side, NOMURA CO., will not be liable for the lose caused by any
of such mishandling. NOMURA CO., will notify the users in written form if any modifications in specification.
WARNINGS !!
Do not immerse the battery in water or seawater, and keep the battery in a cool dry environment during stands by
period.
Does not use or leave the battery near a heat source such as fire or heater when recharging, use the
Battery charger specifically for that purpose.
Do not reverse the position (+) and negative (-) terminals.
Do not connect the battery to an electrical outlet.
Do not dispose the battery in fire or heat.
Do not short-circuit the battery by directly connecting the positive (+) and negative (-) terminal with metal objects
such as wire.
Do not transport or store the battery together with metal objects such as necklaces, hairpins etc.
Do not strike or throw the battery against hard surface.
Do not directly solder the battery and pierce the battery with a nail or other sharp object.
Description
Lithium Ion Polymer battery
7043125SH1-SP1-R&D-77G
Document No.
LIPB
7043125SH1-SP1-R&D-77G
Date
2016-04-1
Rev. 0.0
CAUTIONS !!
Do not use or leave the battery at very high temperature.
(for example, at strong direct sunlight or in a vehicle in extremely hot weather)
Otherwise, it can overheat or fire or its performance will be degenerate and its service life will be shortened.
Do not use it in a location where static electricity is rich.
Otherwise, the safety devices may be damaged, causing a harmful situation.
In case the electrolyte gets into the eyes due to the leakage of battery, do not rub the eyes!
Rinse the eyes with clean running water, and seek medical attention immediately.
Otherwise, it may injure eyes or cause a loss of sight.
If the battery gives off an odor, generates heat, becomes discolored or deformed, or in any way appear abnormal
during use, recharging or storage, immediately remove it from the device or battery charger and place it in a
contained vessel such as a metal box.
In case the battery terminals are contaminated, clean the terminals with a dry cloth before use. Otherwise power
failure or charge failure may occur due to the poor connection between the battery and the electronic circuitry of
the instrument.
Be aware discarded batteries may cause fire, tape the battery terminals to insulate them before disposal.
12
Others
Any matters that this specification doesnt cover should be conferred between the customer
and NOMURA CO.
Nomura Keisuke
Nomura Co President
Description
Lithium Ion Polymer battery
7043125SH1-SP1-R&D-77G
Document No.
LIPB
7043125SH1-SP1-R&D-77G
Date
2016-04-1
description
Specific (mm)
7.0 1.0
43.0 1.0
125.0 1.0
L2
1.5 1.0
L3
21.0 1.5
5.0 1.0
Rev. 0.0