Documente Academic
Documente Profesional
Documente Cultură
Version 6.1.1
User’s Guide
Lotus Mobility Client for Windows
®
Version 6.1.1
User’s Guide
Note: Before using this information and the product it supports, read the information in “Notices” on page 49.
This edition applies to version 6, release 1, modification 1 of IBM Lotus Mobile Connect (product number 5724-R20)
and to all subsequent releases and modifications until otherwise indicated in new editions.
When you send information to IBM, you grant IBM a nonexclusive right to use or distribute the information in any
way it believes appropriate without incurring any obligation to you.
©Copyright International Business Machines Corporation and others 1994, 2007. All rights reserved.
Note to U.S. Government Users — Documentation related to restricted rights — Use, duplication or disclosure is
subject to restrictions set forth in GSA ADP Schedule Contract with IBM Corp.
Contents
About the Mobility Client guide for Modifying connection properties . . . . . . . 17
Windows . . . . . . . . . . . . . . v Using cross-network roaming . . . . . . . . 18
| What’s new in this release . . . . . . . . . . v Roaming limitations of cross-network roaming . . 20
How an Automatically Connect connection works
with Mobility Client for Windows CE . . . . . 20
Chapter 1. Getting started . . . . . . . 1 Sharing the Mobility Client connection on Windows 21
Software and hardware requirements . . . . . . 1 Setting up a trace . . . . . . . . . . . . 21
Installing and configuring the Mobility Client . . . 1 Using the trace viewer . . . . . . . . . . 21
Operating system upgrade considerations . . . 1 Configure trace properties . . . . . . . . 22
Migration considerations . . . . . . . . . 1 Applying maintenance. . . . . . . . . . . 23
Types of installations . . . . . . . . . . 2 Removing the Mobility Client on Windows 2000,
Activating a modem through the network Windows XP, and Windows Vista . . . . . . . 24
provider . . . . . . . . . . . . . . . 2 Removing the Mobility Client on Windows CE . . 24
Installing a modem driver on the mobile computer 2 Removing the Mobility Client for Windows CE
Installing the Mobility Client on Windows 2000, from the desktop . . . . . . . . . . . 24
Windows XP, or Windows Vista . . . . . . . 4 Removing the Mobility Client from the device . . 24
Installing the Mobility Client on Windows CE . . 4
Performing a preconfigured installation . . . . . 7
Performing a silent installation . . . . . . . . 8
Chapter 3. Configuring clients with a
Creating a Mobility Client connection . . . . . . 8 configuration file . . . . . . . . . . 27
iii
iv IBM Lotus Mobility Client for Windows: User’s Guide
About the Mobility Client guide for Windows
This document describes how to install, configure, and use the Mobility Client, a
component of IBM® Lotus® Mobile Connect. This document describes the Mobility
Client for use on Microsoft® Windows®, Windows Vista, Windows CE, and
Windows CE .NET devices.
v
vi IBM Lotus Mobility Client for Windows: User’s Guide
Chapter 1. Getting started
To get started using the Mobility Client, refer to these sections to complete the
following tasks:
v “Software and hardware requirements”
v “Activating a modem through the network provider” on page 2
v “Installing the Mobility Client on Windows 2000, Windows XP, or Windows
Vista” on page 4
v “Installing the Mobility Client on Windows CE” on page 4
v “Applying maintenance” on page 23
v “Creating a Mobility Client connection” on page 8
Note that the Mobility Client supports a silent installation. However, you must
configure the computer to accept unsigned device drivers.
Migration considerations
After you upgrade to the latest version of the Mobility Client, existing connections
are preserved and optimization tuning parameters are automatically migrated after
you start a connection.
1
Types of installations
On all Windows platforms except Windows CE, you can choose from among the
following types of Mobility Client installations:
Typical
installs the entire product image.
Custom
lets you choose which networks to support and which forms of data
optimization (compression, header reduction, filters, and encryption) to
include, enabling you to create a smaller client image.
Selecting this type also lets you choose whether to install support for the
Windows integrated login when using Windows XP. See “Using a
Windows user ID and password to log into the Connection Manager” on
page 13 for more detail.
Preconfigured
lets you copy the artour.ini file that you want to use for configuration. See
“Performing a preconfigured installation” on page 7 for the steps to
perform a preconfigured installation. See also Chapter 3, “Configuring
clients with a configuration file,” on page 27.
Note: Do not install a standard Windows 9600 bps modem until you have first
tried to install one of the modems listed in “Installing a modem driver
provided by Mobility Client.”
To access and install the modem drivers that are provided with the Mobility Client,
you must first install the Mobility Client.
Follow these steps to install one of the modem drivers provided with the Mobility
Clients:
1. Install the Mobility Client.
2. Double-click Modems on the Windows Control Panel (Phone and Modem
Options on Windows 2000 or Windows XP).
3. Select the Modems tab.
4. Click Add to install a new modem.
5. Check the box labelled Don’t detect my modem..., then click Next.
Note: For external modems, you will need to know to which communications
(COM) port you have the modem attached. For PCMCIA modems, you
will need to know which port your PCMCIA device manager has
assigned to your modem.
Windows installs the modem driver on the port you selected.
10. Click Finish to end modem installation
Note: To capture an installation log, click Start -> Run, then enter:
D:\clients\Win32\WC_Win32.exe /Verbose″c:\logfile.log″ where D is
your CD drive and ″c:\logfile.log″ is the path and filename of the log file
you wish to create.
4. Click Run.
5. Follow the setup wizard through the installation process. When a message
about a digital signature displays, click Yes to continue the installation. When
the setup wizard is complete, click Finish.
6. Restart your computer only if you receive a message directing you to do so.
Note: To capture an installation log, click Start -> Run, then enter:
D:\clients\Win32\WC_Win32.exe /Verbose″c:\logfile.log″ where D is
your CD drive and ″c:\logfile.log″ is the path and filename of the log file
you wish to create.
4. A Security Warning dialog displays. To avoid having this dialog display next
time you install the Mobility Client, clear the Always ask before opening this
file box.
5. Click Run.
6. Follow the setup wizard through the installation process.
7. Check the components you want to install, then click OK.
8. When the application downloading is complete, click OK, then click Finish to
complete setup.
9. On the Windows CE device: If you chose to install the Mobility Client in a
directory other than the default, select that destination and click OK. The
installation files are copied from the desktop computer to the Windows CE
device.
Note: To make the installation of the Mobility Client totally unattended, you may
need to turn off File Signature Verification in the operating system. To check
your current settings:
1. Right-click My Computer, then select Properties.
2. Select the Hardware tab, then click Driver Signing.
3. To turn off the prompt that displays when a driver is not signed, set the
File Signature Verification setting to Ignore. If this setting is not Ignore,
you will be prompted to respond Yes or No during installation of the
Mobility Client NDIS driver.
The Mobility Client for Windows 32-bit platforms supports a silent or unattended
installation. Perform the following steps to complete a silent installation.
1. After you download the Mobility Client installation package, issue the
command WC_Win32 –r to record the steps necessary to install the Mobility
Client.
Use the setup wizard to select the options that you want for your silent
installation. The WC_Win32 -r command captures all of the necessary
installation steps to a file called setup.iss. This file is stored either in \Windows
or \WINNT, depending on your machine.
Note: When a message about a digital signature displays, click Yes to continue
the installation.
2. Issue the command WC_Win32 -s -f1<path to setup.iss> to install the Mobility
Client on the target machine or machines. For example: WC_Win32 -s
-f1c:\temp\setup.iss. Note there is no space between the f1 flag and the
beginning of the path statement. If you leave a space, the installation will fail
with a -5 result code.
This command returns you immediately back to the command prompt.
You might want to check the Microsoft Windows Programs listing to make sure the
IBM Mobility Client is listed to ensure the installation was successful. You should
be ready to configure any new connections.
After you have installed the Mobility Client, click Start –> Programs –> IBM
Mobility Client to start it. If you specified a folder name while installing the
client, IBM Mobility Client is replaced by that name.
When you define network connections, they are added to the Connections folder.
If the Connections folder does not display, your configuration is not set up to
define network connections.
To create a connection:
1. Be sure that you have the information you obtained when you activated your
modem through the network provider and the administrative details from
above.
2. Click or tap Start –> Programs –> IBM Mobility Client–> Connections.
3. In the Mobility Connections window icons exist for previously defined
connections. To define a new connection, double-click or tap Create
Connection. The Create Connection wizard guides you through the process of
defining a new connection.
For IP connections, the default behavior of the Mobility Client is to use the fastest
available network connection to communicate with the Connection Manager.
Wireless WAN network connections such as GPRS and CDMA are not
automatically started by the Mobility Client. These connections must be established
by the user before the Mobility Client can use them. The properties of such a
connection will show one network interface named Default Local IP.
Alternatively, users can select the Advanced button when defining the connection
to explicitly select the set of network connections they want to use and the priority
of each one. WiFi and Ethernet connections must be active to be listed. The
properties of an advanced connection will list an interface for each network
connection chosen when the connection was defined. Wireless WAN connections
are automatically started by the Mobility Client for advanced connections.
When using Windows CE devices, the better choice in most cases is selecting the
Default connection type of Automatically Connect. The Sprint PCS Vision(R) Smart
Device PPC-6700 is a Windows Mobile 5 Phone Edition device that supports WiFi
and 1xRTT/EVDO. If you define an Advanced connection to roam between these
two networks you are not able to use Pocket Internet Explorer to browse Internet
or intranet sites when the Mobility Client is connected. Instead, use the Default
connection type of Automatically Connect. For more information, see “How an
Automatically Connect connection works with Mobility Client for Windows CE”
on page 20.
Most instructions for procedures in this section are written for Windows 2000 and
Windows XP systems but are still valid for Windows CE devices or tablet PCs. For
tablet PCs, to view the Pen Actions and the corresponding Equivalent Mouse
Action, open the Tablet and Pen Settings and click the Pen Options tab. For
example, you can configure the options so that double-tap is equivalent to
double-click and press and hold is equivalent to right-click.
Starting a connection
To connect to the Connection Manager either:
v Click or tap Start –> Programs –> IBM Mobility Client–> then select the
connection you want to use.
v Click or tap Start –> Programs –> IBM Mobility Client –> Connections to
display the Mobility Connections window. This window contains an icon
representing each connection you have defined. Double-click or tap twice on an
icon to launch that connection.
Note: On Windows XP, shortcuts for applications that you use often are stored in a
Frequently Used Programs list. To delete shortcuts from this list, right-click
the icon and select Remove from This List.
Note: The Start menu can hold a finite amount of shortcuts. If the Connection
Manager shortcut does not appear in the Start menu, the menu is already
full. Delete an existing shortcut to create additional space.
Depending on how your Mobility Client is configured, a field can be absent or not
required.
Check Save Password if you want to save your password. When you save a
password, you are not required to enter a password before connecting to the
Connection Manager with that user ID. Saving a password also enables users who
do not know the password to make a connection.
11
For dial connections, click or tap Change to change the settings of your dial
connection. For example, if you move in and out of areas where it is not always
necessary to dial an area code, you can use the Change Settings window to add or
remove the area code prior to starting a connection.
After filling in the fields, click or tap Connect to connect to the Connection
Manager. Click Cancel if you do not want to connect.
If the user ID and Connection Manager to which you are connecting are
configured to perform RADIUS authentication and the Connection Manager is
configured to challenge the user for the RADIUS user ID and password, another
Connect window displays after the connection to the Connection Manager is
established. Enter the user ID and password to connect with the RADIUS server in
the second Connect window.
where organizational_unit, userid, password, and Connection_name are values that you
provide.
All command parameters are optional. If you do not specify any parameter values
on the artdial command, the Mobility Client dial function retrieves the default
value from the configuration file (artour.ini) and uses those values to initiate a
connection without prompting you for logon information. If a value required for
the connection is not specified on the command line and is not found in the
configuration file, the dial function prompts you to enter the required information.
The default for Connection_name is the most recently started connection.
If you specify the /x parameter, the dialer will exit whenever an error is
encountered. This is useful when the dialer is being run by another program and
there is not always an operator present to clear error messages on the screen.
If default values do not exist in the configuration file for the command parameters,
you will be prompted to enter values before the Mobility Client initiates a
connection.
When you specify the /d parameter, the dialer will log off (if logged in) and stop
the Mobility Client.
You can configure a specific connection to start automatically after Windows starts.
A connection that is configured to start when Windows starts will be run as a
service and the connection is listed in the Service Control Manager. Because it runs
as a service, the connection is maintained even when you are not logged onto the
system desktop. However, you must use the properties notebook to configure the
service.
Only one connection can be configured to start when Windows starts. If the
connection is lost, the Mobility Client attempts to restart the connection until it is
reestablished.
The same icon without the dot in the upper left corner represents all other
connections (connections that are not started automatically).
When you install the Mobility Client, make sure to choose the Custom program
component labelled Windows integrated logon. If you have already installed the
After the custom program component is installed, enable it to use your Windows
user ID and password to log into the Connection Manager:
1. Create a connection. For instructions, see “Creating a Mobility Client
connection” on page 8.
2. Right-click the icon representing that connection, and select Properties.
3. Click the Attributes tab, then click Use Windows user ID and password.
4. Click OK.
Notes:
1. The option Use Windows user ID and password and the option Prompt for
user ID and password are mutually exclusive. Checking one clears the other.
2. The Use Windows user ID and password option is only visible in the interface
when the Windows integrated logon custom program component is installed.
3. When using the Windows integrated logon, do not use the feature checking
that applications are running before connecting.
You can modify the configuration file to add parameters that let the Mobility
Client check for up to 16 applications before starting a connection. If the
applications listed are not running, the Mobility Client prompts you to manually
start them. To configure these settings, manually edit the configuration file.
Note: You will not be able to log on until all necessary applications are running.
For example, a configuration panel for Norton Antivirus uses the following
parameters:
v PrereqAppName1=Norton Antivirus
v PrereqAppProcess1=rtvscan.exe
A configuration panel for Zone Alarm Integrity client uses the following
parameters:
v PrereqAppName2=Zone Alarm Integrity Client
v PrereqAppProcess2=vsmon.exe
After a successful logon, the applications are started in the order in which they are
listed on the Autostart tab.
In the Export configuration window, determine if you want to export the file as a
platform-independent configuration or whether you want to export the complete
configuration.
Select this check box when you want to export a configuration that can be used by
any installed Mobility Clients. Not all configuration can be exported as
platform-independent. For example, configurations specifying a specific modem
cannot be exported as platform-independent. You will be prompted if you attempt
to export a configuration that cannot be exported as platform-independent.
Clear this check box when the desired configuration involves platform or
machine-specific information, such as specific modem or adapter name. The
exported configuration will need to be imported on a machine with an identical
configuration; one on which the installed modem names and/or network adapter
names match exactly. The operating system version does not matter. If the systems
are not identical, the imported configuration may not successfully connect to the
Connection Manager.
The Export Configuration window lets you determine the name of file that is
exported. After you have successfully identified the desired file, click OK.
wccfgupd [-i | e] [-f file] [-r] [-p] [-q] [-b file] [-d]
-v Show version of information
-i Import a configuration file
-e Export a configuration file
-f file file from which to import or from which to export. This flag is optional
unless -q is specified. If no file is specified, a dialog displays from which to
select a file.
-r Delete the current configuration and replace it with the imported one. This
flag is only valid when -i is specified.
-p Make the exported configuration platform-independent. Use this to create a
configuration valid for any hardware setup instead of only a hardware
setup matching the exporting machine’s. This flag is valid only for export
operations and the default is platform-dependent.
For more information about using the Status window, see the online help. For a
description of how to access online help, see Chapter 4, “Getting online help,” on
page 47.
From the Properties window, you can change configuration details that you
specified when you created a connection. For example,
v You can change properties settings such as the preferred encryption type.
You can also start an application automatically when the connection starts. To do
this from the Properties window, click the Backup tab, then click Browse to
identify the full path and name of the application that you want to start.
For example, in shifting from home Digital Subscriber Line (DSL) to office LAN,
cellular, or WiFi hotspot, users remain connected and encrypted from device to
enterprise. Without roaming, those same users would lose their session and be
forced to restart the application, re-authenticate to the firewall, obtain a new IP
address, renew the Mobility Client connection, and restart the application.
Roaming is accomplished using a software layer that isolates the application from
the physical network interface, implements a persistent IP network interface and
routes application traffic through that new interface. This permits the Mobility
Client to dynamically select networks and seamlessly roam without breaking
session integrity.
The Mobility Client automatically roams from a higher priority network to a lower
priority network when the higher priority network becomes unavailable.
Unavailable can mean a network adapter has been removed, a cable has been
disconnected, or in the case of some wireless networks the device has moved out
of range. For IP-based networks, cable disconnect and 802.11 range events require
the underlying operating system support a feature known as media sense.
Windows 2000, Windows XP and Windows Vista support media sense.
For more information about using the Roaming window, see the online help. For a
description of how to access online help, see Chapter 4, “Getting online help,” on
page 47.
When you configure a connection for more than one IP network (IP, WiFi, GPRS,
1xRTT, Broadband), you can choose to prioritize the list of networks used or
choose the Default Local IP Interface.
Default Local IP Interface
When you choose this option, the Mobility Client automatically roams
between all available network adapters, using the best route available.
When an adapter becomes unavailable, the Mobility Client determines the
next best route and seamlessly connects using that route’s adapter.
When you install a new network adapter, there is no need to modify your
connection in order for the Mobility Client to use it. The Mobility Client
can roam between IP and point-to-point protocol (PPP) connections.
Prioritized List
You decide which network adapter the Mobility Client should use first
when it is available. The Mobility Client automatically roams to the next
adapter in the list when the current one becomes unavailable. When a
higher priority adapter than the current connection becomes available, the
Mobility Client automatically roams to it.
When you install a new adapter, you manually prioritize it for each
connection in which you want the adapter used.
When existing IP connections are migrated from the Mobility Client Version 4 to
Version 5, the Default Local IP Interface choice is selected. If you want to prioritize
your networks, create a new connection and do not select the Default Local IP
Interface.
If you roam from a fast network (such as LAN or WiFi) to a slower network (such
as GPRS, 1xRTT, or CDPD) while actively transferring data over a TCP connection,
the TCP connection can be reset due to packet loss as well as the dramatic increase
in round-trip times. If your application cannot tolerate this behavior, you can make
a registry change that causes TCP to attempt to retransmit unacknowledged
packets more than the default value of five. However, be aware that this parameter
is global to all IP interfaces on the machine and not just for the Mobility Client IP
The advantage is that the Mobility Client does not need be involved with which
type of network is used to create the VPN connection. The Windows Connection
Manager checks to see if a connection is available and, when none is available, it
will automatically start whatever circuit-switched connection is configured under
the Internet settings. If a WiFi or LAN connection is available and has been
marked as connecting to the Internet, then that connection will be used. If not,
then a circuit-switched connection will be started. If WiFi later becomes available,
then the circuit-switched connection will be dropped (and the Mobility Client will
be informed and roam to the WiFi connection).
Additionally, if you do not use Automatically Connect, then the Mobility Client
uses the Remote Access Services (RAS) APIs for circuit-switched connections.
When the RAS APIs are used instead of Windows Connection Manager APIs, there
is difficulty with phone functions on Phone Edition devices and also problems
with power management.
Setting up a trace
You can set up a trace to record diagnostic information for the Mobility Client. For
example, if the modem does not initialize, set up a trace to capture every message
sent during the initialization process and store it in the trace file. IBM service
personnel might request a trace file from you to help diagnose a problem.
To turn on the trace facility, open the Trace Viewer: click Tools --> View Trace....
Closing the window resets the trace facility to its previous level. The messages
displayed in the viewer are the same messages written to the trace file
(arttrace.txt). The viewer sets the tracing level to High, which has a definite impact
on performance.
The trace configuration tools utility also included the following settings:
Trace levels
The controls on the Level tab are:
Off No tracing is performed. This is the default state for the Mobility Client.
Performance
This level is used to trace the performance of the Mobility Client as it is
operating.
IP This level traces IP data being received from and sent to the IP stack.
Low This level helps with debugging, with minimal impact to performance.
High This level is used when Low does not provide enough information. There
is an impact on performance.
Viewer
The controls on the Viewer tab are:
Trace when connecting
Default: Trace when connecting is enabled. Select this check box to enable
the trace facility during a connection attempt. The trace information is
saved to the file arttrace.txt. Clear the check box to disable the trace facility
during a connection attempt.
Display when connecting
Default: Display when connecting is not enabled. Select this check box to
display the trace viewer during a connection attempt. Clear the check box
to prevent the trace viewer from displaying during a connection attempt.
Close after connecting
Default: Close after connecting is not enabled. Select this check box to close
the trace viewer after a connection attempt completes. Clear the check box
to keep the trace viewer displaying after the connection attempt completes.
File
The controls on the File tab are:
Buffering
Buffering the trace data in memory before writing it to the trace file
reduces the impact of tracing on performance. You should turn buffering
on for all problems except program exceptions. Turn buffering off only
when debugging exceptions in the Mobility Client where the Mobility
Client does not close normally.
Flush push button
When buffering is on, click Flush to write data from memory to the trace
file.
Maximum file size
Use the Maximum File Size field to set the maximum size of your trace
file. Trace messages are stored in a file named ARTTRACE.TXT. When the
Applying maintenance
Links to code fixes are available from the Connection Manager product Support
web site for entitled customers who have a download key. Customers can register
at the web site, provide the download key given to them, then download the code
fixes. Download keys are available from the Level 2 Connection Manager IBM
Software Support Center in the U.S.A. at 800-IBM-SERV (800-426-7378). Outside the
United States, use the web site at techsupport.services.ibm.com/guides/
contacts.html. to find the IBM Support Guide Software Support Global Contact
List.
Use Pocket PC installation instructions for Windows Mobile 2003-based Pocket PC,
Windows Mobile 2003 Second Edition, and Windows Mobile version 5 devices.
Note: For Windows Vista: Click Start –> Settings –> Control Panel, Programs
–> Programs and Features, then click Add or Remove Programs
2. Select Mobility Client, then click Change/Remove.
3. On the InstallShield Wizard panel, click Remove, then click Next.
4. Click OK on the Confirm File Deletion panel.
On Windows 2000, Windows XP and Windows Vista, the Mobility Client interface
is automatically removed when you remove the Mobility Client.
Use Pocket PC instructions for Windows Mobile 2003-based Pocket PC, Windows
Mobile 2003 Second Edition, and Windows Mobile version 5 devices.
The artour.ini file is a readable text file, containing many fields and their values.
The file is divided into sections. Each section is preceded by a section heading
enclosed in square brackets. The first section, which is preceded by the heading
[ARTOUR], contains global information about the configuration of this Mobility
Client. Subsequent sections contain information about connections and their
interfaces, and are preceded by headers containing the name of the connection or
interface.
Some entries can exist for a connection or for an interface. The interface section is
checked first, and if no entry is found, then the connection section is used.
27
Table 3. Global parameters that affect all connections
Parameter name Description
ArtcfgPositionSize This parameter stores the display parameters for the Mobility
Connections window on the Windows desktop. It stores the
position, size, and View menu selection for the window in 5
comma-separated values:
v X position
v Y position
v X size
v Y size
v View
Below each connection section will be sections describing the interfaces for that
connection. Each interface section is preceded by a heading with the connection
name, such as [ConnInt0]. Some interface parameters apply to all interfaces; some
network types have additional parameters specific to them.
Table 5. Parameters that describe an interface
Parameter name Description
ALPKeepAliveInterval This entry can exist for a connection or for an interface. The interface
section is checked first, and if no entry is found, then the connection
section is used.
For IP networks the default is 10. For all other networks the default
is 0.
The amount of time, in seconds, that the Mobility Client waits for a
response to wireless link protocol (WLP) requests before timing out.
The WLP is used to start and maintain Mobility Client connections.
This setting helps determine if you are moving into or out of the
coverage area of a network. If you are moving into coverage area,
you may want to delay roaming from the network quickly because
there could be a period of time when the status flips back and forth
between active and inactive. This delay gives the network a chance
to stabilize and establish the actual status. However, if you are
moving out of a coverage area, as indicated that the network status
has been active for a given period of time and then becomes inactive,
then you may want to roam from that network more quickly.
The value of this setting should be more than the value of the
RoamFromWaitUnderThreshold setting.
The value of this setting should be less than the value of the
RoamFromWaitOverThreshold setting.
The maximum number of packets the Mobility Client sends to the modem
without receiving a response before considering the network congested. If no
responses are received after transmitting this number of packets, the Mobility
Client halts packet transmission for the number of seconds specified on the
CongestionTimeout parameter. When this timer expires, the Mobility Client
resumes packet transmission.
MinimumRSSI The RSSI value you want to use to map to 0% strength of the radio signal to
your modem. A percentage value between 0% and 100% can then be displayed
in the tray area of your desktop to indicate signal strength to the modem.
NCLExitSteps Specifies a numeric list of shutdown commands to be sent to the modem when
the client is exiting. The default is ″30 31 33″. Here are the available states:
30 Shut down the modem transmitter
31 Shut down the modem receiver
33 Final shutdown state, which must be the last state in the list, even if it
is the only item in the list.
Context-sensitive help: allows you to get help for a field or a control on an input
panel.
On Mobility Client for Windows
1. Click the question mark (?) in the upper right corner of the panel. A
large question mark appears next to the pointer.
2. Move the pointer over the field or control for which you want help (the
question mark moves with the pointer), then click on the field. Help for
that field or control is displayed.
On Mobility Client for Windows CE
On the panel on which you want help, tap Start –> Help. If there is only
one field on the panel, help is displayed for that field. If multiple fields are
on the panel, help is displayed with links to help for each individual field.
Click the link for which you want help.
Help menu: from the help menu, select the following options:
v Help topics provides overview information, information about fields for which
you are expected to provide input, and step-by-step instructions to complete
tasks.
v About identifies the product version as well as copyright and trademark
information.
Accessibility
Accessibility features help a user who has a physical disability, such as restricted
mobility or limited vision, to use software products successfully. These interfaces
include the major accessibility capabilities of the Connection Manager:
47
Accelerator keys
Accelerator keys are typically identified as an underlined letter on the user
interface and are used to allow you to access an element on the interface from the
keyboard. To trigger an accelerator key, press and hold the Alt key while pressing
the underlined letter.
Using accelerator keys with menus: When you open a menu using the keyboard,
it is not necessary to use the Alt key to trigger accelerator keys for the menu
choices. For example, if you use Alt and C to open the Connection menu in the
Mobility Client, you can simply enter T to activate the accelerator key for the Trace
menu choice.
Keyboard shortcuts
Keyboard shortcuts are used to trigger an action directly. Keyboard shortcuts are
useful for actions that are performed frequently.
Mobility Client for Windows: You can enable interaction with the context menu
on the taskbar by turning on MouseKeys to control the pointer with the numeric
keypad on your keyboard. See Windows online help for more information. You can
also take advantage of other keyboard navigational features as specified for each of
the Windows operating systems. See the Windows online help for more
information.
To get help, use the Tab key to put focus on the field for which you want help,
then press F1.
Mobility Client for Windows CE: You can take advantage of Windows CE
keyboard navigational features as specified for the operating system. See the user’s
guide that was shipped with your Windows CE device for more information.
IBM may not offer the products, services, or features discussed in this document in
other countries. Consult your local IBM representative for information on the
products and services currently available in your area. Any reference to an IBM
product, program, or service is not intended to state or imply that only that IBM
product, program, or service may be used. Any functionally equivalent product,
program, or service that does not infringe any IBM intellectual property right may
be used instead. However, it is the user’s responsibility to evaluate and verify the
operation of any non-IBM product, program, or service.
IBM may have patents or pending patent applications covering subject matter
described in this document. The furnishing of this document does not give you
any license to these patents. You can send license inquiries, in writing, to:
IBM Director of Licensing
IBM Corporation
North Castle Drive
Armonk, NY 10504–1785
USA
For license inquiries regarding double-byte (DBCS) information, contact the IBM
Intellectual Property Department in your country or send inquiries, in writing, to:
IBM World Trade Asia Corporation
Licensing
2-31 Roppongi 3-chome, Minato-ku
Tokyo 106, Japan
The following paragraph does not apply to the United Kingdom or any other
country where such provisions are inconsistent with local law:
INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS
PUBLICATION ″AS IS″ WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or
implied warranties in certain transactions, therefore, this statement may not apply
to you.
Any references in this information to non-IBM Web sites are provided for
convenience only and do not in any manner serve as an endorsement of those Web
sites. The materials at those Web sites are not part of the materials for this IBM
product and use of those Web sites is at your own risk.
IBM may use or distribute any of the information you supply in any way it
believes appropriate without incurring any obligation to you.
49
Licensees of this program who wish to have information about it for the purpose
of enabling: (i) the exchange of information between independently created
programs and other programs (including this one) and (ii) the mutual use of the
information which has been exchanged, should contact:
IBM Corporation
P.O. Box 12195
3039 Cornwallis Road
Research Triangle Park, NC 27709-2195
USA
The licensed program described in this document and all licensed material
available for it are provided by IBM under terms of the IBM Customer Agreement,
IBM International Program License Agreement or any equivalent agreement
between us.
All statements regarding IBM’s future direction or intent are subject to change or
withdrawal without notice, and represent goals and objectives only.
This information contains examples of data and reports used in daily business
operations. To illustrate them as completely as possible, the examples include the
names of individuals, companies, brands, and products. All of these names are
fictitious and any similarity to the names and addresses used by an actual business
enterprise is entirely coincidental.
If you are viewing this information softcopy, the photographs and color
illustrations may not appear.
The software included herein contains PPP Magic Number routines licensed by
Carnegie Mellon University.
Trademarks
The following terms are trademarks or registered trademarks of the IBM
Corporation in the United States or other countries or both:
AIX IBM
Lotus
Adobe, Acrobat, Portable Document Format (PDF), and PostScript are either
registered trademarks or trademarks of Adobe Systems Incorporated in the United
States, other countries, or both.
The FIPS 140-2 logo is a Certification Mark of NIST, which does not imply product
endorsement by NIST, the U.S. or Canadian Governments.
Other company, product, and service names may be trademarks or service marks
of others.
Notices 51
52 IBM Lotus Mobility Client for Windows: User’s Guide
Index
A E Mobility Client (continued)
installing (continued)
accelerator keys 48 export configuration 15 hardware requirements for 1
accessibility 47 modem 2
activating a modem 2 software requirements for 1
adapters, switching 18
applications
H logging off from the command
help, online 47 line 12
check for before connecting 14 password
starting after connection 15 changing initially 14
applying maintenance 23
artour.ini file 27 I removing 24
software requirements 1
automatically starting applications after icon, for starting connection when starting from the command line 12
connecting 15 Windows starts 13 starting the interface 9
import configuration 15 tracing 21
installation uninstalling 24
C preconfigured 7
silent 8
using 11
CAB files 6 viewing connection status 17
installing modem
checking that applications are running
CAB files 6 activating through a network
before connecting 14
Mobility Client 1 provider 2
client roaming 18
modem 2 installing on Mobility Client 2
commands
on CE .NET 4
importing configuration file using 16
on Windows 2000 4
logging off from Mobility Client 12
on Windows CE 4
starting the Mobility Client 12
on Windows Mobile 2003 4 N
using the Mobility Client to connect to navigating
on Windows Vista 4
Connection Manager 12 with the keyboard 47
on Windows XP 4
configuration network adapters, switching 18
integrated logon, Windows 13
importing and exporting 15 network connection
interface
configuring defining 8
using Mobility Client 11
how to connect using the Windows network providers
user ID 13 activating a modem 2
Mobility Client 1
connect window 11 K network roaming 18
notices 49
connection keyboard access 47
automatically starting applications
after 15
checking that applications are running L O
before establishing 14 online help 47
launching a connection 9
defining on Mobility Client 8
legal notices 49
installing a modem 2
log off using command line 12
Mobility Client to Connection
logon, Windows integrated 13 P
Manager 11 password
modifying network properties 17 changing initially on the Mobility
properties, modifying 17
settings, viewing 17 M Client 14
persistent client connection,
sharing 21 maintenance configuring 13
shortcut 11 applying 23 preconfigured installation 7
starting when Windows starts 13 Mobility Client
status, viewing 17 changing the password 14
to Connection Manager 11 configuring 1
viewing settings 17 connecting to the Connection R
viewing status 17 Manager 11 removing
Connection Manager using the command line 12 Mobility Client 24
connecting the Mobility Client 11 using Windows user ID and for Windows CE on the
creating a connection 8 password 13 desktop 24
cross-network roaming 18 connection status, viewing 17 roaming, cross-network 18
getting online help 47
hardware requirements 1
D installing 1 S
activating a modem through a service marks 51
defining a Mobility Client connection 8
network provider 2
disability 47
53
settings
viewing 17
sharing the connection 21
shortcut, connection 11
silent installation 8
starting
the Mobility Client 9
using the command line 12
status
Mobility Client connections,
viewing 17
notebook 17
T
trace
window, using 21
trademarks 51
U
uninstalling
Mobility Client 24
for Windows CE on the
desktop 24
using
the Mobility Client 11
using Windows to share a connection 21
using Windows user ID and
password 13
V
viewing
connection settings 17
connection status 17
W
window
properties, using 17
roaming, using 18
status, using 17
trace, using 21
Windows CE
using Mobility Client 11
Windows integrated logon 13
Windows startup, starting a connection
at 13
wireless modems, installing 2
Printed in USA