Documente Academic
Documente Profesional
Documente Cultură
3 1 0 4
OBJECTIVES:
This course aims at providing the necessary basic concepts of a few statistical and numerical
methods and give procedures for solving numerically different kinds of problems occurring in
engineering and technology.
TEXT BOOKS
1. Johnson. R.A., and Gupta. C.B., "Miller and Freunds Probability and Statistics for Engineers",
11th Edition, Pearson Education, , Asia, 2011.
2. Grewal. B.S., and Grewal. J.S., "Numerical Methods in Engineering and Science", 9th Edition,
Khanna Publishers, New Delhi, 2007.
40
REFERENCES
1. Walpole. R.E., Myers. R.H., Myers. S.L., and Ye. K., "Probability and Statistics for Engineers
and Scientists", 8th Edition, Pearson Education, Asia, 2007.
2. Spiegel. M.R., Schiller. J., and Srinivasan. R.A., "Schaums Outlines on Probability and
Statistics", Tata McGraw Hill Edition, 2004.
3. Chapra. S.C., and Canale. R.P, "Numerical Methods for Engineers", 5th Edition, Tata McGraw
Hill, New Delhi, 2007.
4. Gerald. C.F., and Wheatley. P.O. "Applied Numerical Analysis" Pearson Education, Asia, New
Delhi, 2006.
41
UNIT V FRICTION IN MACHINE ELEMENTS 9
Surface contacts Sliding and Rolling friction Friction drives Friction in screw threads Bearings
and lubrication Friction clutches Belt and rope drives Friction in brakes- Band and Block brakes.
TOTAL: 45 PERIODS
OUTCOMES:
Upon completion of this course, the students can able to apply fundamentals of mechanism for
the design of new mechanisms and analyse them for optimum design.
TEXT BOOKS:
1. Uicker, J.J., Pennock G.R and Shigley, J.E., Theory of Machines and Mechanisms, 3rd
Edition, Oxford University Press, 2009.
2. Rattan, S.S, Theory of Machines, 3rd Edition, Tata McGraw-Hill, 2009.
REFERENCES:
1. Thomas Bevan, "Theory of Machines", 3rd Edition, CBS Publishers and Distributors, 2005.
2. Cleghorn. W. L, Mechanisms of Machines, Oxford University Press, 2005
3. Robert L. Norton, "Kinematics and Dynamics of Machinery", Tata McGraw-Hill, 2009.
4. Allen S. Hall Jr., Kinematics and Linkage Design, Prentice Hall, 1961
5. Ghosh. A and Mallick, A.K., Theory of Mechanisms and Machines", Affiliated East-West Pvt.
Ltd., New Delhi, 1988.
6. Rao.J.S. and Dukkipati.R.V. "Mechanisms and Machine Theory", Wiley-Eastern Ltd., New
Delhi, 1992.
7. John Hannah and Stephens R.C., "Mechanics of Machines", Viva Low-Prices Student Edition,
1999.
8. Ramamurthi. V, "Mechanics of Machines", Narosa Publishing House, 2002.
9. Khurmi, R.S., Theory of Machines,14th Edition, S Chand Publications, 2005
10. Sadhu Sigh : Theory of Machines, "Kinematics of Machine", Third Edition, Pearson Education,
2012
42
UNIT III SHAPER, MILLING AND GEAR CUTTING MACHINES 9
Shaper - Types of operations. Drilling ,reaming, boring, Tapping. Milling operations-types of milling
cutter. Gear cutting forming and generation principle and construction of gear milling ,hobbing and
gear shaping processes finishing of gears.
TEXT BOOKS:
1. Hajra Choudhury, "Elements of Workshop Technology", Vol.II., Media Promoters
2. Rao. P.N Manufacturing Technology - Metal Cutting and Machine Tools", Tata McGraw-Hill,
New Delhi, 2003.
REFERENCES:
1. Richerd R Kibbe, John E. Neely, Roland O. Merges and Warren J.White Machine Tool
Practices, Prentice Hall of India, 1998
2. HMT, "Production Technology", Tata McGraw Hill, 1998.
3. Geofrey Boothroyd, "Fundamentals of Metal Machining and Machine Tools", Mc Graw Hill,
1984
4. Roy. A.Lindberg, Process and Materials of Manufacture, Fourth Edition, PHI/Pearson
Education 2006.
43
diagram CCR Hardenability, Jominy end quench test - Austempering, martempering case
hardening, carburizing, Nitriding, cyaniding, carbonitriding Flame and Induction hardening Vacuum
and Plasma hardening. .
TEXT BOOKS:
1. Avner,, S.H., Introduction to Physical Metallurgy, McGraw Hill Book Company,1994.
2. Williams D Callister, Material Science and Engineering Wiley India Pvt Ltd, Revised Indian
Edition 2007
REFERENCES:
1. Raghavan.V, Materials Science and Engineering, Prentice Hall of India Pvt. Ltd., 1999.
2. Kenneth G.Budinski and Michael K. Budinski, Engineering Materials, Prentice Hall of India
Private Limited, 4th Indian Reprint 2002.
3. Upadhyay. G.S. and Anish Upadhyay, Materials Science and Engineering, Viva Books Pvt.
Ltd., New Delhi, 2006.
4. U.C.Jindal : Material Science and Metallurgy, "Engineering Materials and Mettalurgy", First
Edition, Dorling Kindersley, 2012
44
To study the dynamic processes and understand the features of the earths interior and
surface.
To study the integrated themes and biodiversity, natural resources, pollution control and waste
management.
45
accidents and holocaust, case studies. wasteland reclamation consumerism and waste products
environment production act Air act Water act Wildlife protection act Forest conservation act
The Biomedical Waste (Management and Handling) Rules; 1998 and amendments- scheme of
labeling of environmentally friendly products (Ecomark). enforcement machinery involved in
environmental legislation- central and state pollution control boards- disaster management: floods,
earthquake, cyclone and landslides. Public awareness.
TEXT BOOKS :
1. Gilbert M.Masters, "Introduction to Environmental Engineering and Science", 2nd edition,
Pearson Education, 2004.
2. Benny Joseph, "Environmental Science and Engineering", Tata McGraw-Hill, New Delhi, 2006.
REFERENCES :
1. Trivedi.R.K., "Handbook of Environmental Laws, Rules, Guidelines, Compliances and
Standards", Vol. I and II, Enviro Media, 3rd edition, BPB publications, 2010.
2. Cunningham, W.P. Cooper, T.H. Gorhani, "Environmental Encyclopedia", Jaico Publ., House,
Mumbai, 2001.
3. Dharmendra S. Sengar, "Environmental law", Prentice hall of India PVT LTD, New Delhi,
2007.
4. Rajagopalan, R, "Environmental Studies-From Crisis to Cure", Oxford University Press, 2005.
46
UNIT II INTERNAL COMBUSTION ENGINES 10
Classification - Components and their function. Valve timing diagram and port timing diagram - actual
and theoretical p-V diagram of four stroke and two stroke engines. Simple and complete Carburettor.
MPFI, Diesel pump and injector system. Battery and Magneto Ignition System - Principles of
Combustion and knocking in SI and CI Engines. Lubrication and Cooling systems. Performance
calculation.
LIST OF EXPERIMENTS:
1. Contour milling using vertical milling machine
2. Spur gear cutting in milling machine
3. Helical Gear Cutting in milling machine
47
4. Gear generation in hobbing machine
5. Gear generation in gear shaping machine
6. Plain Surface grinding
7. Cylindrical grinding
8. Tool angle grinding with tool and Cutter Grinder
9. Measurement of cutting forces in Milling / Turning Process
10. CNC Part Programming.
TOTAL : 45 PERIODS
OUTCOMES:
Ability to use different machine tools to manufacturing gears.
Ability to use different machine tools for finishing operations
Ability to manufacture tools using cutter grinder
Develop CNC part programming
LIST OF EXPERIMENTS
I.C. ENGINE LAB 30
1. Valve Timing and Port Timing diagrams.
2. Actual p-v diagrams of IC engines.
3. Performance Test on 4 stroke Diesel Engine.
4. Heat Balance Test on 4 stroke Diesel Engine.
48
5. Morse Test on Multi-cylinder Petrol Engine.
7. Retardation Test on a Diesel Engine.
8. Determination of Flash Point and Fire Point of various fuels / lubricants.
STEAM LAB 15
1. Study on Steam Generators and Turbines.
2. Performance and Energy Balance Test on a Steam Generator.
3. Performance and Energy Balance Test on Steam Turbine.
TOTAL: 45 PERIODS
OUTCOMES:
Ability to conduct experiment on IC engine to study the characteristic and performance of IC
design/ steam turbines.
49
OUTCOMES:
Ability to perform different destructive testing
Ability to characteristic materials
50