Documente Academic
Documente Profesional
Documente Cultură
Tap Holder
Accessories Adapter Shanks
Coolant-Lubricant Tubes
Collets
Extensions
Assembly
of Collet and Tool
Clamping Nuts
Sealing Disks
Torque Wrenches
Access.
Holder
295
Adapter Shanks with Shank Adaption according to DIN 1835 B
Schematic representation
Form AD
D2
D2
D
D
G
L1
Form B
L1
mm EDP
Number
Type Shank Size D2 D G L1
Coolant-lubricant tubes
D1
G
L2 L1
mm EDP
Number
For Shank Size D D1 L1 L2 G
Assembly wrenches
D2
L3
mm EDP
Number
For Shank Size D2 L2
Use of coolant-lubricant tubes with hollow taper shanks according to DIN 69893 A
The coolant-lubricant tube is necessary for connecting the internal coolant-lubricant supply of the machine spindle with the hollow taper shank of the tap holder.
Please note: We recommend screwing the coolant-lubricant tube into the hollow taper shank even when tap holders without internal coolant-lubricant supply
are used (e.g. type KSN); this will help to prevent damage to the hollow taper shank clamping system in case of unintentional switching on of the internal
coolant-lubricant supply.
Pins
D2
D
K2 L3
Type ER 11 GB ER 16 GB ER 20 GB
M2 - M8 M4 - M12 M4 - M12
DIN EDP
EDP
EDP
D2 K2 L3 L3 L3
Type ER 25 GB ER 32 GB ER 40 GB ER 50 GB
DIN EDP
EDP
EDP
EDP
D2 K2 L3 L3 L3 L3
D2
D
K2 L3
Type ER 11 GB ER 20 GB ER 32 GB ER 40 GB
ASME EDP
EDP
EDP
EDP
D2 K2 L3 L3 L3 L3
Access.
Holder
In stock 299
Collets for Twist Drills ER
D2
D
Type ER 08 ER 11 ER 20 ER 32
1 - 4.5 mm 1.5 - 7 mm 3 - 11 mm 3 - 18 mm
D2
D2
D
Type ER 11 ER 20
EDP EDP
Number Number
mm
D2
Access.
Holder
In stock 301
Collets for Taps / Roll Form Taps PCM ET1
K2
D2
L T
DIN EDP
EDP
EDP
EDP
Number Number Number Number
mm
D2 K2
K2
D
D2
L T
EDP EDP EDP
Number Number Number
inch
D2 K2
Access.
Holder
Metric / Inch
The clamping nut Use the clamping nut
is included in the delivery of the tap holder
D
L
EDP
Type Collet Size D L Number
mm inch mm inch
M2 - M7 19 0.7480 45 1.7717 F3398907
VL-ER11-45 ER 11
(No.0 - No.12)
M2 - M7 19 0.7480 95 3.7402 F3398908
VL-ER11-95 ER 11
(No.0 - No.12)
M4 - M12 34 1.3386 62 2.4409 F3398905
VL-ER20-62 ER 20
(No.8 - 3/8)
M4 - M12 34 1.3386 112 4.4094 F3398906
VL-ER20-112 ER 20
(No.8 - 3/8)
M8 - M20 50 1.9685 64 2.5197 F3398909
VL-ER32-64 ER 32
(5/16 - 13/16)
M8 - M20 50 1.9685 98 3.8583 F3398910
VL-ER32-98 ER 32
(5/16 - 13/16)
Application range:
In combination with tap holders type KSN-Synchro and KSN-Softsynchro
Access.
Holder
Groove of collet
Eccentric ring
Marked position (position depends on type of nut)
3. Screw the engaged collet with the clamping nut manually onto the thread of the holder.
Important: Only mount clamping nuts with correctly engaged collet!
4. Insert tap.
Important: If collet and tap are provided with a square, the tap must be brought into such a position that it can be pushed into the square seat of the collet.
5. Tighten the clamping nut with the wrench. Observe the max. torque values in the table.
Hi-Q/ERM 11 11 ft lbs / 15 Nm
1 Hi-Q/ER 11 13 ft lbs / 18 Nm
2
Hi-Q/ERMC 11 11 ft lbs / 15 Nm
Hi-Q/ERMC 16 22 ft lbs / 30 Nm
Hi-Q/ERMC 20 26 ft lbs / 35 Nm
Hi-Q/ERMC 25 30 ft lbs / 40 Nm
Hi-Q/ERC 11 13 ft lbs / 18 Nm
Hi-Q/ERC 20 30 ft lbs / 40 Nm
Hi-Q/ERC 25 96 ft lbs / 130 Nm
Hi-Q/ERC 32 125 ft lbs / 170 Nm
Hi-Q/ERC 40 162 ft lbs / 220 Nm
Hi-Q/ERBC 50 221 ft lbs / 300 Nm
Important: In order to avoid damage to the holder, please counter with open-ended spanner 2 while tightening the clamping nut with wrench 1.
Access.
Holder
Clamping Nuts
Hi-Q/ERMC 16-25
D
Clamping nut
L
Sealing disk
Clamping Nuts
Hi-Q/ERC 20 Hi-Q/ERC 25-40 Hi-Q/ERBC 50
D
D
Clamping nut Clamping nut Clamping nut
Clamping Nuts
Hi-Q/ERMC 11 Hi-Q/ERC 11
D2
D2
D
D
L L
D2 K2 for Collet
D2 D2
Clamping Nuts
Hi-Q/ERM 11 Hi-Q/ER 11
D
D
L L
EDP EDP
Number Number
for Collet
ER 11 (GB) F0940311
ER 11 (GB) F0940911
Further designs upon request
Access.
Holder
16
L1
inch EDP
Number
Type Torque L1
Shell-Type Wrenches
A-EM
inch EDP
Number
16
A
A-GS
inch EDP
Number
16
B
Access.
Holder
310