Documente Academic
Documente Profesional
Documente Cultură
To login into the NSN DSLAM, get connected to Operation Domain VPN & Telnet the DSLAM
17
3) To Check the configuration of each card separately
Give Command : show table shelf
18
5) To Check the Port Admin & Operation Status & xTUC & xTUR Line Rates
Give Command : show lre s1 xdsl phys-table linerates
(Here s1 indicates the slot no. 1, enter s3 for slot 3 )
6) To find the Slot & Port no. from particular inner VLAN & to Check the MAC
Give Command : show mac vlan 137 ( here 137 is inner VLAN no. )
19
9) To Reset the particular Port
Enter into Enable Mode by using command > enable
Enter into Configuration Mode by using command # configure terminal
In configuration mode give command
DSLAM(config)# bridge
DSLAM(config # port lre 2/5 disable ( here 2/5 is slot/port no. )
DSLAM(config # port lre 2/5 enable
DSLAM(config # show lre s2 xdsl phys-table linerates (check the ports admin status )
20