Sunteți pe pagina 1din 59

Customer Training Catalog Training Programs

Customer Training Catalog


Training Programs
LTE Product Technical Training

HUAWEI Learning Service


2015

COMMERCIAL IN CONFIDENCE 1
Customer Training Catalog Training Programs

CONTENTS
1 Training Path............................................................................................................................................................... 4
2 Training Programs ...................................................................................................................................................... 5
2.1 Principle Training Programs ....................................................................................................................... 8
2.1.1 LTE Industry Briefing and Network Deployment Training(GUL) ......................................................... 8
2.1.2 LTE System Overview Training .......................................................................................................... 9
2.1.3 LTE Air Interface Training ................................................................................................................. 10
2.1.4 LTE Protocols and Procedures Training ........................................................................................... 11
2.1.5 LTE-A Key Technology Overview Training ....................................................................................... 12
2.1.6 TCP/IP in the Mobile World Training ................................................................................................ 13
2.2 RNO Training Programs ........................................................................................................................... 14
2.2.1 LTE eRAN3.0 Feature Delta Training ............................................................................................... 15
2.2.2 LTE eRAN3.0 Basic Features and Algorithms Training .................................................................... 16
2.2.3 LTE eRAN3.0 SON Features and Algorithms Training ..................................................................... 17
2.2.4 LTE eRAN3.0 TDD Specific Features and Algorithms Training ........................................................ 18
2.2.5 LTE eRAN3.0 Performance Improving Features and Algorithms Training ....................................... 19
2.2.6 LTE eRAN6.0 Feature Delta Training ............................................................................................... 20
2.2.7 LTE eRAN6.0 Basic Features and Algorithms Training .................................................................... 21
2.2.8 LTE eRAN6.0 SON Features and Algorithms Training ..................................................................... 22
2.2.9 LTE eRAN6.0 TDD Specific Features and Algorithms Training ........................................................ 23
2.2.10 LTE eRAN6.0 Performance Improving Features and Algorithms Training ....................................... 24
2.2.11 LTE eRAN7.0 Feature Delta Training ............................................................................................... 25
2.2.12 LTE eRAN7.0 Basic Features and Algorithms Training .................................................................... 26
2.2.13 LTE eRAN7.0 SON Features and Algorithms Training ..................................................................... 27
2.2.14 LTE eRAN7.0 TDD Specific Features and Algorithms Training ........................................................ 28
2.2.15 LTE eRAN7.0 Performance Improving Features and Algorithms Training ....................................... 29
2.2.16 LTE Tuning Training ......................................................................................................................... 30
2.2.17 LTE Performance Management Training ......................................................................................... 31
2.2.18 LTE Radio Network Optimize Training ............................................................................................. 32
2.2.19 LTE Interoperability Training ............................................................................................................ 33
2.3 RNP Training Programs ........................................................................................................................... 34
2.3.1 LTE Network Design and Dimensioning Training ............................................................................. 34
2.4 Product Training Programs....................................................................................................................... 36
2.4.1 LTE eRAN3.0 Field Maintenance Training ....................................................................................... 36
2.4.2 LTE eRAN3.0 Operation and Configuration Training ....................................................................... 37
2.4.3 LTE eRAN3.0 Reconfiguration Training ........................................................................................... 39
2.4.4 LTE eRAN3.0 Troubleshooting Training ........................................................................................... 40
2.4.5 LTE eRAN3.0 Product Delta Training ............................................................................................... 41
2.4.6 LTE eRAN3.0 Transmission Features and Algorithms Training ....................................................... 42
2.4.7 LTE eRAN6.0 Field Maintenance Training ....................................................................................... 43
2.4.8 LTE eRAN6.0 Operation and Configuration Training ....................................................................... 44

COMMERCIAL IN CONFIDENCE 2
Customer Training Catalog Training Programs

2.4.9 LTE eRAN6.0 Reconfiguration Training ........................................................................................... 46


2.4.10 LTE eRAN6.0 Troubleshooting Training ........................................................................................... 47
2.4.11 LTE eRAN6.0 Product Delta Training ............................................................................................... 48
2.4.12 LTE eRAN6.0 Transmission Features and Algorithms Training ....................................................... 49
2.4.13 LTE eRAN7.0 Field Maintenance Training ....................................................................................... 50
2.4.14 LTE eRAN7.0 Commissioning and Operation Training .................................................................... 51
2.4.15 LTE eRAN7.0 Initial Configuration Training ...................................................................................... 52
2.4.16 LTE eRAN7.0 Reconfiguration Training ........................................................................................... 53
2.4.17 LTE eRAN7.0 Troubleshooting Training ........................................................................................... 54
2.4.18 LTE eRAN7.0 Advanced Troubleshooting Training .......................................................................... 55
2.4.19 LTE eRAN7.0 Product Delta Training ............................................................................................... 56
2.4.20 LTE eRAN7.0 Transmission Features and Algorithms Training ....................................................... 57
2.5 WBT ......................................................................................................................................................... 58
2.5.1 LTE SAE System Overview(WBT) ................................................................................................... 58
2.5.2 LTE in a Nutshell (WBT) .................................................................................................................. 59

COMMERCIAL IN CONFIDENCE 3
1 Training Path
Business Aspects

LTE Industry Briefing and


LTE/SAE in a
Network Deployment
Nutshell(WBT)
Training (GUL)
WBT (Pre-learning) 0.5H ILT 1D
Filed O&M

LTE eRAN 3.0/6.0/7.0


Field Maintenance Training
ILT 2D/2D/2D
* LTE System Overview
Training
ILT 1D
LTE eRAN3.0/6.0 Operation LTE eRAN3.0/6.0/7.0 LTE eRAN3.0/6.0/7.0
and Configuration Training Reconfiguration Training Troubleshooting Training
Routine O&M

LTE/SAE System ILT 3D/5D ILT 1D/1D/2D ILT 1D/2D/2D


Overview(WBT)
WBT (Pre-learning) 4H
LTE eRAN7.0 LTE eRAN7.0 Advanced
LTE eRAN7.0 Initial
Commissioning and Troubleshooting Training
Configuration Training
Operation Training
ILT 2D ILT 3D ILT 2D

LTE eRAN3.0/6.0/7.0
Product Delta Training *: LTE System Overview Training is the brief version of LTE Air Interface Training, so
ILT/LVC 0.5D/1D/1D it is strongly recommended not to select both for the same class!

LTE eRAN3.0/6.0/7.0
TCP/IP in the Mobile World
Others

Transmission Features and


Training
Algorithms Training
ILT 1D ILT 1D/1D/1.5D
RNP

*LTE Air Interface Training


LTE eRAN3.0/6.0/7.0
ILT 2D Performance Improving
LTE Network Design and
Dimensioning Training Features and Algorithms
Training
LTE Protocols and ILT 2D ILT 2D/2D/2D
Procedures Training
LTE eRAN3.0/6.0/7.0 SON
ILT 2D Features and Algorithms
LTE eRAN3.0/6.0/7.0 Training
Basic Features and ILT 1D/1D/1D
Algorithms Training
ILT 3.5D/4D/4D
LTE eRAN3.0/6.0/7.0 TDD
Specific Features and
RNO

Algorithms Training
LTE Tuning Training ILT 0.5D/0.5D/0.5D

ILT 1D
LTE eRAN3.0/6.0/7.0 LTE Performance LTE Radio Network
Feature Delta Training Management Training Optimize Training
ILT/LVC 1D/1D/1D ILT 1D ILT 2D

LTE-A Key Technology


Overview Training LTE Interoperability Training
ILT 0.5D ILT 1D

COMMERCIAL IN CONFIDENCE 4
2 Training Programs

LTE Product Technical Training Training Programs are designed as follows:

Program Duration Training Class


Training Program
Level (workdays) Location Size

Principle

LTE Industry Briefing and Network Deployment Training(GUL) 1 6 ~ 12

LTE System Overview Training 1 6 ~ 12

LTE Air Interface Training 2 6 ~ 12

LTE Protocol and Procedure Training 2 6 ~ 12

LTE-A Key Technology Overview Training 0.5 6 ~ 12

TCP/IP in the Mobile World Training 1 6 ~ 12

Product

LTE eRAN3.0 Field Maintenance Training 2 6 ~ 12

LTE eRAN3.0 Operation and Configuration Training 3 6 ~ 12

LTE eRAN3.0 Reconfiguration Training 1 6 ~ 12

LTE eRAN3.0 Troubleshooting Training 1 6 ~ 12

LTE eRAN3.0 Product Delta Training 1 6 ~ 12

LTE eRAN3.0 Transmission Features and Algorithms Training 1 6 ~ 12

LTE eRAN6.0 Field Maintenance Training 2 6 ~ 12

LTE eRAN6.0 Operation and Configuration Training 5 6 ~ 12

LTE eRAN6.0 Reconfiguration Training 1 6 ~ 12

LTE eRAN6.0 Troubleshooting Training 2 6 ~ 12

LTE eRAN6.0 Product Delta Training 1 6 ~ 12

LTE eRAN6.0 Transmission Features and Algorithms Training 1 6 ~ 12

LTE eRAN7.0 Field Maintenance Training 2 6 ~ 12

LTE eRAN7.0 Commissioning and Operation Training 2 6 ~ 12

LTE eRAN7.0 Initial Configuration Training 3 6 ~ 12

COMMERCIAL IN CONFIDENCE 5
LTE eRAN7.0 Reconfiguration Training 2 6 ~ 12

LTE eRAN7.0 Troubleshooting Training 2 6 ~ 12

LTE eRAN7.0 Advanced Troubleshooting Training 2 6 ~ 12

LTE eRAN7.0 Product Delta Training 1 6 ~ 12

LTE eRAN7.0 Transmission Features and Algorithms Training 1.5 6 ~ 12

RNP

LTE Network Design and Dimensioning Training 2 6 ~ 12

RNO

LTE eRAN3.0 Feature Delta Training 1 6 ~ 12

LTE eRAN3.0 Basic Features and Algorithms Training 3.5 6 ~ 12

LTE eRAN3.0 SON Features and Algorithms Training 1 6 ~ 12

LTE eRAN3.0 TDD Specific Features and Algorithms Training 0.5 6 ~ 12

LTE eRAN3.0 Performance Improving Features and Algorithms


2 6 ~ 12
Training

LTE eRAN6.0 Feature Delta Training 1 6 ~ 12

LTE eRAN6.0 Basic Features and Algorithms Training 4 6 ~ 12

LTE eRAN6.0 SON Features and Algorithms Training 1 6 ~ 12

LTE eRAN6.0 TDD Specific Features and Algorithms Training 0.5 6 ~ 12

LTE eRAN6.0 Performance Improving Features and Algorithms


2 6 ~ 12
Training

LTE eRAN7.0 Feature Delta Training 1 6 ~ 12

LTE eRAN7.0 Basic Features and Algorithms Training 4 6 ~ 12

LTE eRAN7.0 SON Features and Algorithms Training 1 6 ~ 12

LTE eRAN7.0 TDD Specific Features and Algorithms Training 0.5 6 ~ 12

LTE eRAN7.0 Performance Improving Features and Algorithms


2 6 ~ 12
Training

LTE Tuning Training 1 6 ~ 12

LTE Performance Management Training 1 6 ~ 12

LTE Radio Network Optimize Training 2 6 ~ 12

LTE Interoperability Training 1 6 ~ 12

COMMERCIAL IN CONFIDENCE 6
WBT

LTE SAE System Overview 4H

LTE in a Nutshell 0.5H

Level Description:: Basic Course : Intermediate Course : Advanced Course : Expert Course

COMMERCIAL IN CONFIDENCE 7
2.1 Principle Training Programs

2.1.1 LTE Industry Briefing and Network Deployment Training(GUL)

Training Path Describe various services and trends provided


by LTE
LTE Industry Briefing and Network Overview evolution of radio technologies
Deployment (GUL)
OEA11 1d Describe network architecture of
Lecture
EPS(E-UTRAN and EPC)
Explain key technologies of LTE, such as
Target Audience
OFDM/SC-FDM, MIMO

Business Developer Brief LTE industry chain development

Prerequisites Outline LTE overall network evolution


deployment scenario such as interoperability
A general knowledge in cellular systems and strategy, voice strategy etc.
radio technology
Duration
Objectives
1 working day
On completion of this program, the participants will
Class Size
be able to:
Outline Incentive of LTE Min 6, Max 12

COMMERCIAL IN CONFIDENCE 8
2.1.2 LTE System Overview Training

Training Path Describe the role of the MME and the S-GW
Describe the S1, X2 and radio-interface and
LTE System Overview
their protocol stacks

OEA03 1d Describe the radio interface techniques used in


Lecture
uplink and downlink
Target Audience Describe the channel structure of the radio
interface
Field Technician
Describe the time-domai and
Service Technician
Frequency-domain structure in the radio
System Technician
interface in UL and DL for both FDD and TDD
Network Deployment Engineer
mode
Service Engineer
Have a good understanding of the OFDM
Service Design Engineer principle, signal generation and processing
Service Planning Engineer Detail the reference symbols in DL
System Engineer Describe MIMO technology
Prerequisites Have a good understanding of the SC-FDMA
principle, signal generation and processing
A general knowledge in cellular systems and radio
Describe Huawei eNodeB Family
technology
Describe Huawei LTE products and application
Objectives
scenarios
On completion of this program, the participants will Describe Huawei LTE products Operation and
be able to: Maintenance System
Describe the evolution of cellular networks Duration
Summarize the evolution of 3GPP releases
1 working day
Explain the logical architecture of EPS
(E-UTRAN and EPC) Class Size

Give an overview of the interfaces in EPS Min 6, Max 12


Describe the Evolved Packet Core (EPC)

COMMERCIAL IN CONFIDENCE 9
2.1.3 LTE Air Interface Training

Training Path Outline the radio interface protocols


Detail the time-domain and frequency-domain
LTE Air Interface
structure in the radio interface in UL and DL for

2d both FDD and TDD mode


OEA04 Lecture
Detail the channel structure of the radio
Target Audience interface
Detail the frame structure of the radio interface
Service Engineer
Describe the uplink/downlink physical signals
Service Design Engineer
Detail the uplink/downlink control signaling and
Network Design Engineer
formats
Prerequisites
Detail the uplink/downlink reference symbols

Attendees should have a general knowledge in Detail the uplink/downlink transmission


cellular systems and radio technology. technique

Objectives Detail the paging procedures


Explain the cell search procedure
On completion of this program, the participants will
Detail the random access procedure
be able to:
Describe the uplink/downlink power control
Describe the evolution of cellular networks
Explain HARQ
Summarize the evolution of 3GPP releases
Describe the concepts of layers, channel rank,
Describe the radio interface techniques
spatial multiplexing, open and closed loop
Explain the difference between the FDD and spatial multiplexing, TX diversity, beamforming,
TDD mode SU-MIMO and MU-MIMO
Describe the flexible spectrum usage
Outline the concepts of channel coding
Duration
Describe the principle for OFDM
Have a good understanding of the 2 working days

OFDMA/SC-FDMA principle, signal generation Class Size


and processing
Min 6, Max 12
Explain the pros and cons with OFDMA and
SC-FDMA

COMMERCIAL IN CONFIDENCE 10
2.1.4 LTE Protocols and Procedures Training

Training Path EPS interfaces


Explain how signaling takes place between the
LTE Protocols and Procedures
UE and the EPC

OEA15 2d Brief the main functions of Non Access


Lecture, Lab, Demo
Stratum(NAS), Radio Resource Control (RRC),
Target Audience Packet Data Convergence Protocol (PDCP)
Radio Link Control (RLC), Medium Access
Service Engineer
Control (MAC), the physical layer and their
Service Design Engineer
relations
Network Design Engineer
Explain the purpose of EPS Bearer Services
Prerequisites and eUTRA Radio Bearer

Successful completion of the following courses:: Explain the concept, principle and signaling flow of

LTE Air Interface typical procedure, such as UE access

Objectives procedure, paging, TAU, handover etc.


Duration
On completion of this program, the participants will
be able to: 2 working days
Describe the evolution of cellular networks Class Size
Explain the main functions of EPS network
Min 6, Max 12
element
List the interfaces in EPS and the protocol of

COMMERCIAL IN CONFIDENCE 11
2.1.5 LTE-A Key Technology Overview Training

Training Path Objectives

LTE-A Key Technology Overview On completion of this program, the participants will
be able to:
OE002 Lecture 0.5d
Describe LTE Describe -A requirements and
3GPP schedule
Target Audience
Describe benefit and principle of LTE-A key
Service Engineer technology
Service Design Engineer Huawei LTE-A cases study
Network Design Engineer Duration
Prerequisites
0.5 working day
Successful completion of the following courses: Class Size
LTE System Overview
Min 6, Max 12
LTE Air Interface
LTE eRAN3.0 Features and Algorithms

COMMERCIAL IN CONFIDENCE 12
2.1.6 TCP/IP in the Mobile World Training

Training Path Learn about common IP RAN concepts such as


the MSTP and PTN
TCP/IP in the Mobile World
Understand the TCP/IP protocol structure, and

1d learn common technologies such as the VLAN


OEA07 Lecture
and DSCP
Target Audience Learn the protocol stack composition on IP
RAN interfaces
System Engineer
Learn the IP components, and understand the
Service Engineer
data exchange process
Service Planning Engineer
Be familiar with common IP RAN devices and
Service Design Engineer
maintenance applications
Network Design Engineer
Learn about differences among the IP, ATM,
Prerequisites and TDM technologies, and problems caused
by IP-based networking
A general knowledge in cellular systems and radio
technology Duration

Objectives 1 working day

On completion of this program, the participants will Class Size


be able to:
Min 6, Max 12
Learn about IP protocol release specifications
and common RFC standards

COMMERCIAL IN CONFIDENCE 13
2.2 RNO Training Programs

COMMERCIAL IN CONFIDENCE 14
2.2.1 LTE eRAN3.0 Feature Delta Training

Training Path LTE eRAN2.1/2.2 Features and Algorithms


Objectives
LTE eRAN3.0 Enhanced Features
On completion of this program, the participants will
OEO57 Lecture 0.5d
be able to:
Describe enhanced and new functions in
Handover Feature from eRAN2.1/2.2 to
LTE eRAN3.0 New Features
eRAN3.0
OEO56 Lecture 0.5d Introduce enhanced functions in RAN
Sharing(Optional)
Target Audience Outline new functions in CSFB Feature in
eRAN3.0
System Engineer
Explain UL CoMP Feature in eRAN3.0
Service Engineer
Describe 800M self-interference cancellation in
Service Planning Engineer
eRAN3.0(Optinal)
Service Design Engineer
Network Design Engineer
Duration

Prerequisites 1 working day

Successful completion of the following courses:


Class Size

LTE Air Interface Min 6, Max 12


LTE Protocols and Procedures

COMMERCIAL IN CONFIDENCE 15
2.2.2 LTE eRAN3.0 Basic Features and Algorithms Training

Training Path Describe downlink power control


Describe uplink power control
LTE eRAN3.0 Basic Features and
Set initial power
Algorithms
OEO51 Lecture 3.5d Outline scheduling
Describe downlink scheduling
Target Audience Describe uplink scheduling

System Engineer Describe scheduling deployment strategy

Service Engineer Describe basic principles of QoS management

Service Planning Engineer Describe QoS management policies

Service Design Engineer Describe QoS management methods

Network Design Engineer List when to use QoS management


Outline MIMO feature
Prerequisites
Describe multiple-antenna reception/
Successful completion of the following courses: transmission MIMO
LTE Air Interface Describe multiple-antenna transmission MIMO
LTE Protocols and Procedures Describe adaptive mode selection and
Objectives switching of MIMO
Set adaptive MIMO
On completion of this program, the participants will
Describe PDCCH/PUCCH resource
be able to:
management feature
Outline idle mode
parameters
Describe PLMN selection
Outline LTE voice solutions
Describe cell selection and cell reselection
Outline CS Fallback
Config cell selection
Describe CS Fallback procedure
Config cell reselection measurement
Draw network architecture for CS Fallback to
Describe system information reception
UTRAN/GERAN
Config SIB
Describe CS Fallback to UTRAN/GERAN
Describe tracking area registration
Select CS Fallback mechanisms
Describe paging monitoring procedure
Perform configuration on eNodeB for CS
Outline mobility management
Fallback
Describe intra-frequency handover
Duration
Describe inter-frequency handover
Describe inter-rat handover 3.5 working days

Set measurement configuration Class Size


Set handover related parameters
Min 6, Max 12
Outline power control

COMMERCIAL IN CONFIDENCE 16
2.2.3 LTE eRAN3.0 SON Features and Algorithms Training

Training Path Describe intra-RAT MRO management


Describe inter-RAT MRO management
LTE eRAN3.0 SON Features and
Set MRO to optimize handover
Algorithms
OEO52 Lecture 1d Outline PCI conflict detection
self-optimization overview
Target Audience Describe PCI conflict detection

System Engineer Describe PCI self-optimization in M2000

Service Engineer Observe PCI conflict information

Service Planning Engineer Set PCI conflict detection

Service Design Engineer Outline RACH optimization

Network Design Engineer Describe prerequisites for RACH optimization


Describe zero correlation zone configuration
Prerequisites
Describe contention-based vs. contention-free
Successful completion of the following courses: random access
LTE Air Interface Describe RACH resource adjustment
LTE Protocols and Procedures Perform MML to deploy RACH optimization
LTE eRAN3.0 Basic Features and Algorithms Describe impact of RACH optimization
Objectives Outline cell outage detection
Describe sleeping cell detection techniques
On completion of this program, the participants will
Describe cell outage detection techniques
be able to:
Deploy cell outage detection
Outline ANR overview
Describe intra-RAT ANR management
Duration

Describe inter-RAT ANR management 1 working day


Switch on ANR Class Size
Set ANR related parameters
Outline MRO processing flow Min 6, Max 12

List classification of intra-RAT MRO

COMMERCIAL IN CONFIDENCE 17
2.2.4 LTE eRAN3.0 TDD Specific Features and Algorithms Training

Training Path Outline beamforming


Describe beamforming-related concepts
LTE eRAN3.0 TDD Specific Features and
Algorithms Describe beamforming principles and

OEO53 0.5d techniques


Lecture
Describe beamforming feature application
Target Audience scenarios
Deploy beamforming
System Engineer
Describe concept of sector, cell and TDD
Service Engineer
subframe configuration
Service Planning Engineer
Draw TDD frame structure
Service Design Engineer
Describe uplink-downlink subframe
Network Design Engineer
configurations
Prerequisites
Describe configurations of special subframes
Successful completion of the following courses: Describe when to use subframe configuration

LTE Air Interface Perform subframe configuration

LTE Protocols and Procedures Duration


LTE eRAN3.0 Basic Features and Algorithms
0.5 working day
Objectives
Class Size
On completion of this program, the participants will
Min 6, Max 12
be able to:

COMMERCIAL IN CONFIDENCE 18
2.2.5 LTE eRAN3.0 Performance Improving Features and Algorithms Training

Training Path Describe inter-frequency load balance


Describe inter-RAT load balance
LTE eRAN3.0 Performance Improving
Outline compact bandwidth
Features and Algorithms
OEO54 Lecture 2d Describe key technologies of compact
bandwidth
Target Audience Describe related physical resource
management
System Engineer
Deploy compact bandwidth
Service Engineer
Outline UL CoMP
Service Planning Engineer
Describe application scenarios of UL CoMP
Service Design Engineer
Describe key techniques for UL CoMP
Network Design Engineer
Describe related features of UL CoMP
Prerequisites
Deploy UL CoMP
Successful completion of the following courses: Outline ICIC
LTE Air Interface Describe downlink ICIC
LTE Protocols and Procedures Describe uplink ICIC
LTE eRAN3.0 Basic Features and Algorithms Describe ICIC deployment strategy
Objectives Deploy ICIC
Outline principle and algorithm of RAN
On completion of this program, the participants will
Sharing(Optinal)
be able to:
Duration
Describe admission control
Set admission control 2 working days
Describe congestion control Class Size
Outline load monitoring
Min 6, Max 12
Outline load balance
Describe intrafrequency load balance

COMMERCIAL IN CONFIDENCE 19
2.2.6 LTE eRAN6.0 Feature Delta Training

Training Path LTE eRAN3.0 Features and Algorithms


Objectives
LTE eRAN6.0 Enhanced Features
On completion of this program, the participants will
OEO67 Lecture 0.5d
be able to:
Describe enhanced functions in Handover
Feature from eRAN3.0 to eRAN6.0
LTE eRAN6.0 New Features
Describe enhanced and new functions in CS
OEO66 Lecture 0.5d Fallback from eRAN3.0 to eRAN6.0
Describe enhanced functions in Cell Outage
Target Audience Detection from eRAN3.0 to eRAN6.0

System Engineer Describe new functions in DRX and Signaling


Control from eRAN3.0 to eRAN6.0
Service Engineer
Describe new features in eRAN6.0
Service Planning Engineer
Service Design Engineer Duration
Network Design Engineer 1 working day
Prerequisites Class Size
Successful completion of the following courses: Min 6, Max 12
LTE Air Interface
LTE Protocols and Procedures

COMMERCIAL IN CONFIDENCE 20
2.2.7 LTE eRAN6.0 Basic Features and Algorithms Training

Training Path Outline scheduling


Describe downlink scheduling
LTE eRAN6.0 Basic Features and
Describe uplink scheduling
Algorithms
OEO61 Lecture 4d Describe scheduling deployment strategy
Describe basic principles of QoS management
Target Audience Describe QoS management policies

System Engineer Describe QoS management methods

Service Engineer List when to use QoS management

Service Planning Engineer Outline MIMO feature

Service Design Engineer Describe multiple-antenna reception/


transmission MIMO
Network Design Engineer
Describe multiple-antenna transmission MIMO
Prerequisites
Describe adaptive mode selection and
Successful completion of the following courses: switching of MIMO
LTE Air Interface Set adaptive MIMO
LTE Protocols and Procedures Describe PDCCH/PUCCH resource
Objectives management feature
parameters
On completion of this program, the participants will
Outline CS Fallback
be able to:
Describe CS Fallback procedure
Outline idle mode
Draw network architecture for CS Fallback to
Describe PLMN selection
UTRAN/GERAN
Describe cell selection and cell reselection
Describe CS Fallback to UTRAN/GERAN
Config cell selection
Select CS Fallback mechanisms
Config cell reselection measurement
Perform configuration on eNodeB for CS
Describe system information reception
Fallback
Config SIB
Outline CA Basic Concepts and Principles
Describe tracking area registration
Describe CA Feature Benefit and Influence
Describe paging monitoring procedure
Perform CA Feature Deployment and
Outline mobility management Configuration
Describe intra-frequency handover Outline DRX basic concepts
Describe inter-frequency handover Describe DRX realization principles
Describe inter-rat handover
Duration
Set measurement configuration
Set handover related parameters 4 working days

Outline power control Class Size


Describe downlink power control
Min 6, Max 12
Describe uplink power control
Set initial power

COMMERCIAL IN CONFIDENCE 21
2.2.8 LTE eRAN6.0 SON Features and Algorithms Training

Training Path Describe intra-RAT MRO management


Describe inter-RAT MRO management
LTE eRAN6.0 SON Features and
Set MRO to optimize handover
Algorithms
OEO62 Lecture 1d Outline PCI conflict detection
self-optimization overview
Target Audience Describe PCI conflict detection

System Engineer Describe PCI self-optimization in M2000

Service Engineer Observe PCI conflict information

Service Planning Engineer Set PCI conflict detection

Service Design Engineer Outline RACH optimization

Network Design Engineer Describe prerequisites for RACH optimization


Describe zero correlation zone configuration
Prerequisites
Describe contention-based vs. contention-free
Successful completion of the following courses: random access
LTE Air Interface Describe RACH resource adjustment
LTE Protocols and Procedures Perform MML to deploy RACH optimization
LTE eRAN6.0 Basic Features and Algorithms Describe impact of RACH optimization
Objectives Outline cell outage detection
Describe sleeping cell detection techniques
On completion of this program, the participants will
Describe cell outage detection techniques
be able to:
Deploy cell outage detection
Outline ANR overview
Describe intra-RAT ANR management
Duration

Describe inter-RAT ANR management 1 working day


Switch on ANR Class Size
Set ANR related parameters
Outline MRO processing flow Min 6, Max 12

List classification of intra-RAT MRO

COMMERCIAL IN CONFIDENCE 22
2.2.9 LTE eRAN6.0 TDD Specific Features and Algorithms Training

Training Path Outline beamforming


Describe beamforming-related concepts
LTE eRAN6.0 TDD Specific Features and
Algorithms Describe beamforming principles and

OEO63 0.5d techniques


Lecture
Describe beamforming feature application
Target Audience scenarios
Deploy beamforming
System Engineer
Describe concept of sector, cell and TDD
Service Engineer
subframe configuration
Service Planning Engineer
Draw TDD frame structure
Service Design Engineer
Describe uplink-downlink subframe
Network Design Engineer
configurations
Prerequisites
Describe configurations of special subframes
Successful completion of the following courses: Describe when to use subframe configuration

LTE Air Interface Perform subframe configuration

LTE Protocols and Procedures Duration


LTE eRAN6.0 Basic Features and Algorithms
0.5 working day
Objectives
Class Size
On completion of this program, the participants will
Min 6, Max 12
be able to:

COMMERCIAL IN CONFIDENCE 23
2.2.10 LTE eRAN6.0 Performance Improving Features and Algorithms Training

Training Path Describe inter-frequency load balance


Describe inter-RAT load balance
LTE eRAN6.0 Performance Improving
Outline compact bandwidth
Features and Algorithms
OEO64 Lecture 2d Describe key technologies of compact
bandwidth
Target Audience Describe related physical resource
management
System Engineer
Deploy compact bandwidth
Service Engineer
Outline UL CoMP
Service Planning Engineer
Describe application scenarios of UL CoMP
Service Design Engineer
Describe key techniques for UL CoMP
Network Design Engineer
Describe related features of UL CoMP
Prerequisites
Deploy UL CoMP
Successful completion of the following courses: Outline ICIC
LTE Air Interface Describe downlink ICIC
LTE Protocols and Procedures Describe uplink ICIC
LTE eRAN6.0 Basic Features and Algorithms Describe ICIC deployment strategy
Objectives Deploy ICIC
Outline principle and algorithm of RAN
On completion of this program, the participants will
Sharing(Optinal)
be able to:
Duration
Describe admission control
Set admission control 2 working days
Describe congestion control Class Size
Outline load monitoring
Min 6, Max 12
Outline load balance
Describe intrafrequency load balance

COMMERCIAL IN CONFIDENCE 24
2.2.11 LTE eRAN7.0 Feature Delta Training

Training Path LTE Protocols and Procedures


LTE eRAN3.0 Features and Algorithms
LTE eRAN7.0 Enhanced Features
Objectives
OEO77 Lecture 0.5d
On completion of this program, the participants will
be able to:
Describe enhanced functions in Handover
LTE eRAN7.0 New Features
Feature from eRAN6.0 to eRAN7.0
OEO76 Lecture 0.5d Describe enhanced and new functions in
scheduling from eRAN6.0 to eRAN7.0
Target Audience
Describe enhanced functions in MLB from

System Engineer eRAN6.0 to eRAN7.0

Service Engineer Describe new features in eRAN6.0

Service Planning Engineer Duration


Service Design Engineer
1 working day
Network Design Engineer
Class Size
Prerequisites
Min 6, Max 12
Successful completion of the following courses:
LTE Air Interface

COMMERCIAL IN CONFIDENCE 25
2.2.12 LTE eRAN7.0 Basic Features and Algorithms Training

Training Path Outline scheduling


Describe downlink scheduling
LTE eRAN7.0 Basic Features and
Describe uplink scheduling
Algorithms
OEO71 Lecture 4d Describe scheduling deployment strategy
Describe basic principles of QoS management
Target Audience Describe QoS management policies

System Engineer Describe QoS management methods

Service Engineer List when to use QoS management

Service Planning Engineer Outline MIMO feature

Service Design Engineer Describe multiple-antenna reception/


transmission MIMO
Network Design Engineer
Describe multiple-antenna transmission MIMO
Prerequisites
Describe adaptive mode selection and
Successful completion of the following courses: switching of MIMO
LTE Air Interface Set adaptive MIMO
LTE Protocols and Procedures Describe PDCCH/PUCCH resource
Objectives management feature
parameters
On completion of this program, the participants will
Outline CS Fallback
be able to:
Describe CS Fallback procedure
Outline idle mode
Draw network architecture for CS Fallback to
Describe PLMN selection
UTRAN/GERAN
Describe cell selection and cell reselection
Describe CS Fallback to UTRAN/GERAN
Config cell selection
Select CS Fallback mechanisms
Config cell reselection measurement
Perform configuration on eNodeB for CS
Describe system information reception
Fallback
Config SIB
Outline CA Basic Concepts and Principles
Describe tracking area registration
Describe CA Feature Benefit and Influence
Describe paging monitoring procedure
Perform CA Feature Deployment and
Outline mobility management Configuration
Describe intra-frequency handover Outline DRX basic concepts
Describe inter-frequency handover Describe DRX realization principles
Describe inter-rat handover
Duration
Set measurement configuration
Set handover related parameters 4 working days

Outline power control Class Size


Describe downlink power control
Min 6, Max 12
Describe uplink power control
Set initial power

COMMERCIAL IN CONFIDENCE 26
2.2.13 LTE eRAN7.0 SON Features and Algorithms Training

Training Path Describe intra-RAT MRO management


Describe inter-RAT MRO management
LTE eRAN7.0 SON Features and
Set MRO to optimize handover
Algorithms
OEO72 Lecture 1d Outline PCI conflict detection
self-optimization overview
Target Audience Describe PCI conflict detection

System Engineer Describe PCI self-optimization in M2000

Service Engineer Observe PCI conflict information

Service Planning Engineer Set PCI conflict detection

Service Design Engineer Outline RACH optimization

Network Design Engineer Describe prerequisites for RACH optimization


Describe zero correlation zone configuration
Prerequisites
Describe contention-based vs. contention-free
Successful completion of the following courses: random access
LTE Air Interface Describe RACH resource adjustment
LTE Protocols and Procedures Perform MML to deploy RACH optimization
LTE eRAN7.0 Basic Features and Algorithms Describe impact of RACH optimization
Objectives Outline cell outage detection
Describe sleeping cell detection techniques
On completion of this program, the participants will
Describe cell outage detection techniques
be able to:
Deploy cell outage detection
Outline ANR overview
Describe intra-RAT ANR management
Duration

Describe inter-RAT ANR management 1 working day


Switch on ANR Class Size
Set ANR related parameters
Outline MRO processing flow Min 6, Max 12

List classification of intra-RAT MRO

COMMERCIAL IN CONFIDENCE 27
2.2.14 LTE eRAN7.0 TDD Specific Features and Algorithms Training

Training Path Outline beamforming


Describe beamforming-related concepts
LTE eRAN7.0 TDD Specific Features and
Algorithms Describe beamforming principles and

OEO73 0.5d techniques


Lecture
Describe beamforming feature application
Target Audience scenarios
Deploy beamforming
System Engineer
Describe concept of sector, cell and TDD
Service Engineer
subframe configuration
Service Planning Engineer
Draw TDD frame structure
Service Design Engineer
Describe uplink-downlink subframe
Network Design Engineer
configurations
Prerequisites
Describe configurations of special subframes
Successful completion of the following courses: Describe when to use subframe configuration

LTE Air Interface Perform subframe configuration

LTE Protocols and Procedures Duration


LTE eRAN7.0 Basic Features and Algorithms
0.5 working day
Objectives
Class Size
On completion of this program, the participants will
Min 6, Max 12
be able to:

COMMERCIAL IN CONFIDENCE 28
2.2.15 LTE eRAN7.0 Performance Improving Features and Algorithms Training

Training Path Describe inter-frequency load balance


Describe inter-RAT load balance
LTE eRAN7.0 Performance Improving
Outline compact bandwidth
Features and Algorithms
OEO74 Lecture 2d Describe key technologies of compact
bandwidth
Target Audience Describe related physical resource
management
System Engineer
Deploy compact bandwidth
Service Engineer
Outline UL CoMP
Service Planning Engineer
Describe application scenarios of UL CoMP
Service Design Engineer
Describe key techniques for UL CoMP
Network Design Engineer
Describe related features of UL CoMP
Prerequisites
Deploy UL CoMP
Successful completion of the following courses: Outline ICIC
LTE Air Interface Describe downlink ICIC
LTE Protocols and Procedures Describe uplink ICIC
LTE eRAN7.0 Basic Features and Algorithms Describe ICIC deployment strategy
Objectives Deploy ICIC
Outline principle and algorithm of RAN
On completion of this program, the participants will
Sharing(Optinal)
be able to:
Duration
Describe admission control
Set admission control 2 working days
Describe congestion control Class Size
Outline load monitoring
Min 6, Max 12
Outline load balance
Describe intrafrequency load balance

COMMERCIAL IN CONFIDENCE 29
2.2.16 LTE Tuning Training

Training Path Make test preparations


Collect data collection for tuning
LTE Network Tuning
List factors affecting coverage

OEO01 Lecture, Demo 1d List solutions for weak coverage


List solutions for cross coverage
Target Audience List solutions for lack of dominant cell

System Technician Perform basic coverage problem analysis

Service Technician List main handover problems during network


tuning
System Engineer
Perform basic handover problem analysis
Service Engineer
Perform basic RF adjustment
Prerequisites
Familiar Huawei GENEX Probe& Assistant
Successful completion of the following courses: Operation
LTE Air Interface Duration
LTE Protocols and Procedures
1 working day
Objectives
Class Size
On completion of this program, the participants will
Min 6, Max 12
be able to:
Describe basic process of RF optimization

COMMERCIAL IN CONFIDENCE 30
2.2.17 LTE Performance Management Training

Training Path Describe retainability KPIs and detail the


counters of them
LTE Performance Management
Describe mobility KPIs and detail the counters

1d of them
OEO03 Lecture, Lab
Describe service integrity
Target Audience Describe utilization KPIs and detail the
counters of them
System Technician
Describe availability KPIs and detail the
Service Technician
counters of them
System Engineer
Describe traffic KPI and detail the counters of
Service Engineer
them
Prerequisites Describe performance management basic

Successful completion of the following courses: concepts

LTE Air Interface Describe measurement management

LTE Protocols and Procedures Implement performance measurement


operations on M2000
LTE Basic Features and Algorithms
Implement custom counter management
Objectives
Query performance result
On completion of this program, the participants will Duration
be able to:
Describe the structure of LTE performance 1 working day

measurement system Class Size


List classification of KPI
Min 6, Max 12
Describe accessibility KPI and detail the
counters of it

COMMERCIAL IN CONFIDENCE 31
2.2.18 LTE Radio Network Optimize Training

Training Path Describe basic principle of access


Describe fault diagnosis process
LTE Radio Network Optimize
Perform operations of fault diagnosis

OEO06 Lecture 2d Perform checking hardware connections


Perform checking version mapping
Target Audience Perform checking the eNodeB configuration

System Engineer Perform checking quality on the air interface

Service Engineer Perform checking the EPC configuration

Service Planning Engineer Describe time and frequency resources and


throughput calculation
Service Design Engineer
Describe throughput fault diagnosis procedures
Network Design Engineer
and methods
Prerequisites
Describe processes of data transmission fault
Successful completion of the following courses: diagnosis
LTE Air Interface Describe basic requirements for fault diagnosis
LTE Protocols and Procedures Perform diagnosis for locating downlink data
LTE Features and Algorithms transmission faults

Objectives Perform diagnosis for uplink problems


Duration
On completion of this program, the participants will
be able to: 2 working days
Outline handover procedure Class Size
Perform handover fault analysis
Min 6, Max 12
Describe typical case of handover fault

COMMERCIAL IN CONFIDENCE 32
2.2.19 LTE Interoperability Training

Training Path be able to:


Outline challenges for LTE interoperability
LTE Interoperability
Describe GUL interoperability network

OEA09 1d architecture and interfaces


Lecture
Describe IRAT PLMN selection process, cell
Target Audience selection/selection process and signaling
procedure in idle mode
System Engineer
Describe IRAT measurement
Service Engineer
triggering/stopping phase, measurement phase,
Service Planning Engineer
execution phase and signaling procedure in
Service Design Engineer
connection mode
Network Design Engineer
Application and realization of IRAT
Prerequisites Duration
Successful completion of the following courses:
0.5 working day
LTE Air Interface
Class Size
LTE Protocols and Procedures
Objectives Min 6, Max 12

On completion of this program, the participants will

COMMERCIAL IN CONFIDENCE 33
2.3 RNP Training Programs

2.3.1 LTE Network Design and Dimensioning Training

Training Path dimensioning


Perform LTE link budget
LTE Radio Network Design
Describe propagation model

OEP01 Lecture, Demo 1.67d Perform site number dimensioning


Outline capacity dimensioning procedure
Describe traffic model and parameters
LTE Access Transport Network Perform radio network throughput calculation
Dimensioning
Analysis DL Throughput
OEP02 Lecture 0.33d
Analysis UL Throughput
Perform throughput per cell(IP) dimensioning
Target Audience
Perform capacity dimensioning
Service Planning Engineer Outline frequency planning
Service Design Engineer Outline TA planning
Network Design Engineer Outline PCI planning

Prerequisites Outline PRACH planning


Describe the LTE transport networking
Successful completion of the following courses:
Describe the S1 and X2 interface protocol
LTE Air Interface
Explain IP functionality, such as VLAN, IP sec
LTE Protocols and Procedures etc.
Objectives Perform transport network dimensioning
Perform eNodeB hardware dimensioning
On completion of this program, the participants will
be able to: Duration
Outline LTE radio network planning
2 working days
Describe LTE radio network planning Process
Class Size
Describe differences between 2G/3G and LTE
Dimensioning Min 6, Max 12
Perform LTE radio network coverage

COMMERCIAL IN CONFIDENCE 34
COMMERCIAL IN CONFIDENCE 35
2.4 Product Training Programs

2.4.1 LTE eRAN3.0 Field Maintenance Training

Training Path be able to:


Describe the hardware structure of eNodeB
eNodeB V100R005 Product Description
Describe the logical structure of eNodeB

OEB50 Lecture, Lab 0.5d Describe the working principle and functions of
eNodeB boards
Describe the procedure of eNodeB
eNodeB V100R005 Local Commissioning commissioning
Describe the related concept of eNodeB
OEB51 Lecture, Lab 1d
software and configuration file
Querying the current version of eNodeB
Use USB disk to commission the eNodeB
eNodeB V100R005 Field Maintenance
Commission the eNodeB through LMT
OEB52 Lecture, Lab 0.5d Verify commissioning result
Power up/down the eNodeB and connect up
Target Audience
LMT to the node
Field Technician Find the alarm list of eNodeB
System Technician Perform corrective and preventive
Network Deployment Engineer maintenance on eNodeB
Prerequisites Find faulty hardware units and replace them
Duration
Successful completion of the following courses:
LTE System Overview 2 working days
Objectives Class Size

On completion of this program, the participants will Min 6, Max 12

COMMERCIAL IN CONFIDENCE 36
2.4.2 LTE eRAN3.0 Operation and Configuration Training

Training Path Use M2000 client Login M2000 server and


eNodeB
eNodeB V100R005 Product Description
Execute MML in single mode

OEB50 0.5d Execute MML in batch mode


Lecture, Lab
Manage alarms of eNodeB
Manage device, such as querying board states,
eNodeB V100R005 Remote blocking board and unblocking board
Commissioning
Manage software, such as querying current
OEB53 Lecture, Lab 0.5d
software version and backup configuration file
Manage transport data, such as querying IP
address of Ethernet port and querying IP route
eNodeB V100R005 Operation
Manage radio data, such as querying cell
OEB54 Lecture, Lab 1d states and querying neighbor cell
Manage tracing message, for example:
creating a tracing task, checking tracing result,
eNodeB V100R005 Initial Configuration saving result
Manage real-time monitoring, for example:
OEB55 Lecture, Lab 1d
creating a monitoring task, checking and
saving monitoring result
Target Audience
Describe the procedure of eNodeB

System Engineer commissioning

Service Engineer Describe the related concept of eNodeB


software and configuration file
Service Planning Engineer
Querying the current version of eNodeB
Service Design Engineer
Commission the eNodeB through M2000
Prerequisites
Verify commissioning result
Successful completion of the following courses: Outline the procedure of eNodeB data
LTE System Overview configuration
Objectives Describe the main table of "eNodeB Summary
Data"
On completion of this program, the participants will
Use LTE Configuration System to create
be able to:
project
Describe the hardware structure of eNodeB
Use LTE Configuration System to import
Describe the logical structure of eNodeB
external template
Describe the working principle and functions of
Use LTE Configuration System to query data
eNodeB boards
configuration and modify data
Explain the architecture and components of
Use LTE Configuration System to check up
eNodeB operation and maintenance system
data
Install LMT software
Use LTE Configuration System to export data
Install M2000 client software
Use LMT login eNodeB

COMMERCIAL IN CONFIDENCE 37
Duration Class Size

3 working days Min 6, Max 12

COMMERCIAL IN CONFIDENCE 38
2.4.3 LTE eRAN3.0 Reconfiguration Training

Training Path Outline CME/MML operation


Perform capacity expansion
eNodeB V100R005 Reconfiguration
Perform adding an FDD cell

OEB57 Lecture, Lab 1d Perform changing the cell bandwidth


Perform adding an MME Connection
Target Audience Perform adding an S-GW Connection

System Engineer Perform network reconstruction

Service Engineer Perform changing the cell EARFCNs

Service Planning Engineer Perform changing the Cell PCI

Service Design Engineer Perform changing the Cell ID


Perform relocating an MME
Prerequisites
Perform relocating an S-GW
Successful completion of the following courses: Duration
LTE System Overview
eNodeB LTE V100R005 Product Description 1 working day

Objectives Class Size

On completion of this program, the participants will Min 6, Max 12

be able to:

COMMERCIAL IN CONFIDENCE 39
2.4.4 LTE eRAN3.0 Troubleshooting Training

Training Path Outline the procedure of eNodeB


troubleshooting flow
eNodeB V100R005 Troubleshooting
Perform the alarm management and analysis

OEB56 1d Perform the log collection


Lecture, Lab
Draw hardware fault handling procedure
Target Audience Handle with the main faults of device level
Draw transport fault handling procedure
System Engineer
Handle with the main faults of transport level
Service Engineer
Draw radio fault diagnosis process
Service Planning Engineer
Check the eNodeB radio configuration
Service Design Engineer
Check quality on the air interface
Prerequisites
Check the EPC configuration
Successful completion of the following courses: Handle with the main faults of radio level
LTE System Overview Duration
eNodeB LTE V100R005 Product Description
1 working day
eNodeB LTE V100R005 Reconfiguration
Class Size
Objectives
Min 6, Max 12
On completion of this program, the participants will
be able to:

COMMERCIAL IN CONFIDENCE 40
2.4.5 LTE eRAN3.0 Product Delta Training

Training Path eNodeB V100R003 Data Configuration


LTE eRAN2.1 Features and Algorithms
LTE eRAN3.0 O&M Enhancement
Objectives
OEB58 Lecture 0.5d
On completion of this program, the participants will
be able to:
Target Audience
Outline the new hardware
System Engineer Describe O
Service Engineer M new and enhanced functions
Service Planning Engineer Duration
Service Design Engineer
Network Design Engineer 0.5 working day

Prerequisites Class Size

Successful completion of the following courses: Min 6, Max 12

LTE Air Interface


LTE Protocols and Procedures

COMMERCIAL IN CONFIDENCE 41
2.4.6 LTE eRAN3.0 Transmission Features and Algorithms Training

Training Path Introduction TRM Algorithms


Explain transport Resource Configurations and
LTE eRAN3.0 Transmission Features and Mapping
Algorithms
OET58 1d Describe Transport Load Control
Lecture
Describe Transmission Security principle
Target Audience Explain Transmission Security Mechanisms
Outline LTE synchronization
System Engineer
Describe frequency and time synchronization
Service Engineer
List synchronization sources
Service Planning Engineer
Describe working modes of clocks
Service Design Engineer
Perform synchronization configuration
Network Design Engineer
Duration
Prerequisites
1 working day
Successful completion of the following courses:
eNodeB V100R005 Initial Configuration
Class Size

Objectives Min 6, Max 12

On completion of this program, the participants will


be able to:

COMMERCIAL IN CONFIDENCE 42
2.4.7 LTE eRAN6.0 Field Maintenance Training

Training Path be able to:


Describe the hardware structure of eNodeB
eNodeB V100R006 Product Description
Describe the logical structure of eNodeB

OEB60 Lecture, Lab 0.5d Describe the working principle and functions of
eNodeB boards
Describe the procedure of eNodeB
eNodeB V100R006 Local Commissioning commissioning
Describe the related concept of eNodeB
OEB61 Lecture, Lab 1d
software and configuration file
Querying the current version of eNodeB

eNodeB V100R006 Field Maintenance Use USB disk to commission the eNodeB
Commission the eNodeB through LMT
OEB62 Lecture, Lab 0.5d
Verify commissioning result
Power up/down the eNodeB and connect up
Target Audience
LMT to the node
System Engineer Find the alarm list of eNodeB
Service Engineer Perform corrective and preventive
Service Planning Engineer maintenance on eNodeB
Service Design Engineer Find faulty hardware units and replace them
Prerequisites Duration

Successful completion of the following courses: 2 working days


LTE System Overview Class Size
Objectives
Min 6, Max 12
On completion of this program, the participants will

COMMERCIAL IN CONFIDENCE 43
2.4.8 LTE eRAN6.0 Operation and Configuration Training

Training Path eNodeB


Execute MML in single mode
eNodeB V100R006 Product Description
Execute MML in batch mode

OEB60 Lecture, Lab 0.5d Manage alarms of eNodeB


Manage device, such as querying board states,
blocking board and unblocking board
eNodeB V100R006 Equipment Manage software, such as querying current
Commissioning
software version and backup configuration file
OEB63 Lecture, Lab 0.5d
Manage transport data, such as querying IP
address of Ethernet port and querying IP route

eNodeB V100R006 Operation Manage radio data, such as querying cell


states and querying neighbor cell
OEB64 Lecture, Lab 1d Manage tracing message, for example:
creating a tracing task, checking tracing result,
saving result
eNodeB V100R006 Initial Configuration
Manage real-time monitoring, for example:

3d creating a monitoring task, checking and


OEB65 Lecture, Lab
saving monitoring result
Target Audience Describe the procedure of eNodeB
commissioning
System Engineer
Describe the related concept of eNodeB
Service Engineer
software and configuration file
Service Planning Engineer
Querying the current version of eNodeB
Service Design Engineer
Commission the eNodeB through M2000
Prerequisites
Verify commissioning result

Successful completion of the following courses: Outline the procedure of eNodeB data

LTE System Overview configuration

Objectives Describe the main table of "eNodeB Summary


Data"
On completion of this program, the participants will Use LTE Configuration System to create
be able to: project
Describe the hardware structure of eNodeB Use LTE Configuration System to import
Describe the logical structure of eNodeB external template
Describe the working principle and functions of Use LTE Configuration System to query data
eNodeB boards configuration and modify data
Explain the architecture and components of Use LTE Configuration System to check up
eNodeB operation and maintenance system data
Install LMT software Use LTE Configuration System to export data
Install M2000 client software Duration
Use LMT login eNodeB
5 working days
Use M2000 client Login M2000 server and

COMMERCIAL IN CONFIDENCE 44
Class Size Min 6, Max 12

COMMERCIAL IN CONFIDENCE 45
2.4.9 LTE eRAN6.0 Reconfiguration Training

Training Path Outline CME/MML operation


Perform capacity expansion
eNodeB V100R006 Reconfiguration
Perform adding an FDD cell

OEB67 Lecture, Lab 1d Perform changing the cell bandwidth


Perform adding an MME Connection
Target Audience Perform adding an S-GW Connection

System Engineer Perform network reconstruction

Service Engineer Perform changing the cell EARFCNs

Service Planning Engineer Perform changing the Cell PCI

Service Design Engineer Perform changing the Cell ID


Perform relocating an MME
Prerequisites
Perform relocating an S-GW
Successful completion of the following courses: Duration
LTE System Overview
eNodeB LTE V100R005 Product Description 1 working day

Objectives Class Size

On completion of this program, the participants will Min 6, Max 12

be able to:

COMMERCIAL IN CONFIDENCE 46
2.4.10 LTE eRAN6.0 Troubleshooting Training

Training Path Outline the procedure of eNodeB


troubleshooting flow
eNodeB V100R006 Troubleshooting
Perform the alarm management and analysis

OEB66 2d Perform the log collection


Lecture, Lab
Draw hardware fault handling procedure
Target Audience Handle with the main faults of device level
Draw transport fault handling procedure
System Engineer
Handle with the main faults of transport level
Service Engineer
Draw radio fault diagnosis process
Service Planning Engineer
Check the eNodeB radio configuration
Service Design Engineer
Check quality on the air interface
Prerequisites
Check the EPC configuration
Successful completion of the following courses: Handle with the main faults of radio level
LTE System Overview Duration
eNodeB LTE V100R006 Product Description
2 working days
eNodeB LTE V100R006 Reconfiguration
Class Size
Objectives
Min 6, Max 12
On completion of this program, the participants will
be able to:

COMMERCIAL IN CONFIDENCE 47
2.4.11 LTE eRAN6.0 Product Delta Training

Training Path eNodeB V100R005 Data Configuration


LTE eRAN3.0 Features and Algorithms
LTE eRAN6.0 Product Delta
Objectives
OEB68 Lecture 1d
On completion of this program, the participants will
be able to:
Target Audience
Describe LMT delta functions
System Engineer Describe M2000 client delta functions
Service Engineer Duration
Service Planning Engineer
Service Design Engineer 1 working day

Prerequisites Class Size

Successful completion of the following courses: Min 6, Max 12

LTE Air Interface


LTE Protocols and Procedures

COMMERCIAL IN CONFIDENCE 48
2.4.12 LTE eRAN6.0 Transmission Features and Algorithms Training

Training Path Introduction TRM Algorithms


Explain transport Resource Configurations and
LTE eRAN6.0 Transmission Features and Mapping
Algorithms
OET68 1d Describe Transport Load Control
Lecture
Describe Transmission Security principle
Target Audience Explain Transmission Security Mechanisms
Outline LTE synchronization
System Engineer
Describe frequency and time synchronization
Service Engineer
List synchronization sources
Service Planning Engineer
Describe working modes of clocks
Service Design Engineer
Perform synchronization configuration
Network Design Engineer
Duration
Prerequisites
1 working day
Successful completion of the following courses:
eNodeB V100R005 Initial Configuration
Class Size

Objectives Min 6, Max 12

On completion of this program, the participants will


be able to:

COMMERCIAL IN CONFIDENCE 49
2.4.13 LTE eRAN7.0 Field Maintenance Training

Training Path Perform local data configuration on power and


monitoring device
eNodeB V100R007 Product Description Power up/down the eNodeB and connect up
LMT to the node
OEB70 Lecture, Lab 0.5d
Find the alarm list of eNodeB
Perform corrective and preventive maintenance
on eNodeB
eNodeB V100R007 Local Commissioning
Find faulty hardware units and replace them
OEB71 Lecture, Lab 1d Duration

2 working days
eNodeB V100R007 Field Maintenance Class Size

OEB72 Lecture, Lab 0.5d Min 6, Max 12

Target Audience

System Engineer
Service Engineer
Service Planning Engineer
Service Design Engineer
Prerequisites

Successful completion of the following courses:


LTE System Overview
Objectives

On completion of this program, the participants will


be able to:
Describe the hardware structure of eNodeB
Describe the logical structure of eNodeB
Describe the working principle and functions of
eNodeB boards
Describe the procedure of eNodeB local
commissioning
Describe the related concept of eNodeB
software and configuration file
Querying the current version of eNodeB
Use USB disk to commission the eNodeB
Commission the eNodeB through LMT
Verify commissioning result
Describe power and monitoring device

COMMERCIAL IN CONFIDENCE 50
2.4.14 LTE eRAN7.0 Commissioning and Operation Training

Training Path Install U2000 client software


Use LMT login eNodeB
eNodeB V100R007 Product Description Use U2000 client Login U2000 server and
eNodeB
OEB70 Lecture, Lab 0.5d
Execute MML in single mode
Execute MML in batch mode

eNodeB V100R007 Equipment Manage alarms of eNodeB


Commissioning Manage device, such as querying board states,
OEB73 Lecture, Lab 0.5d blocking board and unblocking board
Manage software, such as querying current
software version and backup configuration file
eNodeB V100R007 Operation
Manage transport data, such as querying IP
OEB74 Lecture, Lab 1d address of Ethernet port and querying IP route
Manage radio data, such as querying cell states
and querying neighbor cell
Manage tracing message, for example: creating
Target Audience
a tracing task, checking tracing result, saving
System Engineer result

Service Engineer Manage real-time monitoring, for example:


Service Planning Engineer creating a monitoring task, checking and saving

Service Design Engineer monitoring result


Describe the procedure of eNodeB
Prerequisites
commissioning
Successful completion of the following courses: Describe the related concept of eNodeB
LTE System Overview software and configuration file
Objectives Querying the current version of eNodeB
Commission the eNodeB through U2000
On completion of this program, the participants will
Verify commissioning result
be able to:
Duration
Describe the hardware structure of eNodeB
Describe the logical structure of eNodeB 2 working days
Describe the working principle and functions of Class Size
eNodeB boards
Explain the architecture and components of Min 6, Max 12

eNodeB operation and maintenance system


Install LMT software

COMMERCIAL IN CONFIDENCE 51
2.4.15 LTE eRAN7.0 Initial Configuration Training

Training Path

eNodeB V100R007 Initial Configuration

OEB75 Lecture, Lab 3d

Target Audience

System Engineer
Service Engineer
Service Planning Engineer
Service Design Engineer
Prerequisites

Successful completion of the following courses:


LTE System Overview
eNodeB V100R007 Product Description
Objectives

On completion of this program, the participants will


be able to:
Outline the procedure of eNodeB data
configuration
Implement initial data configuration by MML
Describe the main table of "eNodeB Summary
Data"
Implement initial data configuration by CME
Duration

3 working days
Class Size

Min 6, Max 12

COMMERCIAL IN CONFIDENCE 52
2.4.16 LTE eRAN7.0 Reconfiguration Training

Training Path

eNodeB V100R007 Reconfiguration

OEB77 Lecture, Lab 2d

Target Audience

System Engineer
Service Engineer
Service Planning Engineer
Service Design Engineer
Prerequisites

Successful completion of the following courses:


LTE System Overview
eNodeB LTE V100R007 Product Description
Objectives

On completion of this program, the participants will be able to:


Outline CME/MML operation
Perform capacity expansion
Perform adding an FDD cell
Perform changing the cell bandwidth
Perform adding an MME Connection
Perform adding an S-GW Connection
Perform network reconstruction
Perform changing the cell EARFCNs
Perform changing the Cell PCI
Perform changing the Cell ID
Perform relocating an MME
Perform relocating an S-GW
Duration

2 working day
Class Size

Min 6, Max 12

COMMERCIAL IN CONFIDENCE 53
2.4.17 LTE eRAN7.0 Troubleshooting Training

Training Path

eNodeB V100R007 Troubleshooting

OEB76 Lecture, Lab 2d

Target Audience

System Engineer
Service Engineer
Service Planning Engineer
Service Design Engineer
Prerequisites

Successful completion of the following courses:


LTE System Overview
eNodeB LTE V100R007 Product Description
eNodeB LTE V100R007 Reconfiguration
Objectives

On completion of this program, the participants will


be able to:
Outline the procedure of eNodeB
troubleshooting flow
Perform the alarm management and analysis
Perform the log collection
Draw hardware fault handling procedure
Handle with the main faults of device level
Draw transport fault handling procedure
Handle with the main faults of transport level
Draw radio fault diagnosis process
Check the eNodeB radio configuration
Check quality on the air interface
Check the EPC configuration
Handle with the main faults of radio level
Duration

2 working days
Class Size

Min 6, Max 12

COMMERCIAL IN CONFIDENCE 54
2.4.18 LTE eRAN7.0 Advanced Troubleshooting Training

Training Path troubleshooting flow


Perform the alarm management and analysis

eNodeB LTE V100R007 Troubleshooting Draw hardware fault handling procedure


of Transmission Handle with the main faults of device level
NA Lecture 1d Draw transport fault handling procedure
Handle with the main faults of transport level
eNodeB V100R007 Troubleshooting of Draw radio fault diagnosis process
Antenna & Feeder System
Check the eNodeB radio configuration
NA Lecture, Lab 1d
Handle with the main faults of radio level

Target Audience Understand Antenna & Feeder system working


principle
System Engineer Understand PIM fault and perform
Service Engineer troubleshooting by U2000 and WebLMT
Service Planning Engineer Understand VSWR fault and perform
Service Design Engineer troubleshooting by U2000 and WebLMT
Prerequisites Understand TMA fault and perform
troubleshooting by U2000 and WebLMT
Successful completion of the following courses:
Duration
LTE System Overview
eNodeB LTE V100R007 Product Description 2 working days
eNodeB LTE V100R007 Reconfiguration Class Size
Objectives
Min 6, Max 12
On completion of this program, the participants will
be able to:
Outline the procedure of eNodeB

COMMERCIAL IN CONFIDENCE 55
2.4.19 LTE eRAN7.0 Product Delta Training

Training Path Objectives

LTE eRAN7.0 Product Delta On completion of this program, the participants will
be able to:
OEB78 Lecture 1d Describe eRAN7.0 new hardware
Describe eRAN7.0 new O&M functions and

Target Audience feature


Describe multi-BBU interconnection feature
System Engineer Describe USU hardware and its implementation
Service Engineer in multi-BBU interconnection feature
Service Planning Engineer Duration
Service Design Engineer
1 working day
Prerequisites
Class Size
Successful completion of the following courses:
LTE eRAN6.0 Operation and Configuration Min 6, Max 12

Training

COMMERCIAL IN CONFIDENCE 56
2.4.20 LTE eRAN7.0 Transmission Features and Algorithms Training

Training Path Objectives

On completion of this program, the participants will


LTE eRAN7.0 Transmission Features and
Algorithms be able to:
OET78 Lecture 1.5d Explain TRM features and algorithms
Explain transmission security solution
Target Audience
Explain synchronization solution
System Engineer Explain S1/X2 Self-Management feature and
Service Engineer algorithms

Service Planning Engineer Explain Automatic OMCH Establishment

Network Design Engineer feature

Prerequisites
Duration
Successful completion of the following
courses: 1.5 working day

eNodeB V100R007 Product Description Class Size

Min 6, Max 12

COMMERCIAL IN CONFIDENCE 57
2.5 WBT

2.5.1 LTE SAE System Overview(WBT)

Training Path Describe the radio interface techniques used in


uplink and downlink
LTE SAE System Overview(WBT)
Describe the channel structure of the radio

4h interface
OEA00 Lecture
Describe the time-domai and
Target Audience Frequency-domain structure in the radio
interface in UL and DL for both FDD and TDD
System Engineer
mode
Service Engineer
Have a good understanding of the OFDM
Service Planning Engineer
principle, signal generation and processing
Service Design Engineer
Detail the reference symbols in DL
Network Design Engineer
Describe MIMO technology
Prerequisites Have a good understanding of the SC-FDMA
principle, signal generation and processing
Basic knowledge of mobile communications
Describe Huawei eNodeB Family
Objectives
Describe Huawei LTE products and application
On completion of this program, the participants will scenarios
be able to: Describe Huawei LTE products Operation and
Summarize the evolution of 3GPP releases Maintenance System
Explain the logical architecture of EPS Duration
(E-UTRAN and EPC)
4 hours
Give an overview of the interfaces in EPS
Describe the Evolved Packet Core (EPC) Class Size

Describe the role of the MME and the S-GW Min 6, Max 12
Describe the S1, X2 and radio-interface and
their protocol stacks

COMMERCIAL IN CONFIDENCE 58
2.5.2 LTE in a Nutshell (WBT)

Training Path trends for next generation wireless networks


Sketch the System Architecture Evolution (SAE)
LTE in a Nutshell (WBT)
for LTE and its interfaces

OEA01 0.5h Describe OFDM concepts and how it is used in


Lecture
LTE
Target Audience Define the key features of the LTE air interface
Walk through the mobile device operations
System Engineer
from power-up to service setup
Service Engineer
Explain how uplink and downlink traffic are
Service Planning Engineer
handled in LTE networks
Service Design Engineer
Walk through a high level service flow setup on
Network Design Engineer
an end-to-end basis
Prerequisites Explain deployment scenarios of LTE networks

Basic knowledge of mobile communications Duration


Objectives 0.5hour

On completion of this program, the participants will Class Size


be able to:
Min 6, Max 12
Describe the state of wireless networks and

COMMERCIAL IN CONFIDENCE 59

S-ar putea să vă placă și