Documente Academic
Documente Profesional
Documente Cultură
Capacity
The 9700 series suspension has a Gross Axle Weight Rating (G.A.W.R.) of 22,400 lbs when equipped with single leaf,
two leaf, standard three leaf and seven leaf springs. Heavy duty three leaf and eight leaf springs raise the G.A.W.R. to
24,000 lbs.
Standard Overslung Suspension with standard 49 inch axle centers
H=6 /2" (165mm)
1
43 1/2 (1105mm) 43 1/2 (1105mm) H=*
CH=61/8"( 156mm) CH=2"( 51mm)
Mounting
Height
Mounting
Height
(165mm)
19" ( 483mm) 49"( 1245mm) 61/2"***
* Str/Mt-31/2"(89mm), Un/mt & Si/mt=37/8"(99mm), Fl/mt-51/2 "(140mm) **Ref.: This dimension may vary with changes in springs,
spring seat heights, etc. ***Recommended spring clearance.
Hutchens suspensions with axle spacings other than 49" are covered in other pages of this catalog.
241
Other Options:
Rocker and Optional
Center Hanger Fastener No-Hop Attach Fitting
Standard Huck Fastener (Shown) Rear Axle Only
Optional 1-1/8" X 7" Prevents axle "hop" when
Capscrew and Nut braking with empty trailer.
T-S-H9700T-FL-3/4 Flange mount hangers, for 5" round axles, with 12" u-bolts 16.00"
T-S-H9700T-ST/B Straddle mount hangers, for 5" round axles, with 12" u-bolts 16.00"
Underslung Suspensions
Single Axle
T-S-H9700S-US/UM/B Undermount hangers, under slung, for 5" round axles, 6.75"
Tandem Axle
T-S-H9700T-US/UM/B Under mount hangers, underslung for 5" round axles, 7.00"
with 12" u-bolts
1 3 4 3 5
2 2
421/2" A/C
44" A/C
421/2" Axle Centers
On the Overslung, Underslung and Inverted U-bolts, H and CH-9700 series suspensions with 421/2" axle centers. The
parts not interchangeable with the standard 49" axle center models are as follows:
Item Part No. Quantity Description
1&5 T-S-16398-02* 2 Adj. radius rod with bushing - 16" long.
1&5 T-S-16398-01* 2 Adj. radius rod with bushing - 14" long.
2 T-S-See Below 8 U-bolts
3 T-S-See Below 4 Spring Assembly
Mounting Heights and U-Bolt Lengths For Suspensions With 42 1/2" and 44" Axle Centers
Spring 5 Inch Round Axle
Ass'y Spring Seat Height in Inches 3/4 1-1/4 1-3/4 2-1/4 2-3/4 3-1/4 3-3/4 4-1/4 4-3/4
T-S-TRA-2717-SP Mounting Height in Inches 141/8 145/8 151/8 155/8 161/8 165/8 171/8 175/8 181/8
(6 Leaf) U-Bolt Length in Inches* 11 12 12 13 13 14 14 15 15
Spring Seat Height in Inches 3/4 1-1/4 1-3/4 2-1/4 2-3/4 3-1/4 3-3/4 4-1/4 4-3/4
T-S-TRA-026 Mounting Height in Inches 131/4 133/4 141/4 143/4 151/4 153/4 161/4 163/4 171/4
(Single Leaf) U-Bolt Length in Inches* 10 10 11 11 12 12 13 13 14
*U-bolt part numbers beginning with "7/8X3X"--
7
(165mm)
19" ( 483mm) 49"( 1245mm) 61/2"*** Fabricated Cast
(H) (CH)
* Str/Mt-31/2"(89mm), Un/mt & Si/mt=37/8"(99mm), Fl/mt-51/2"(140mm)
** Ref.: This dimension may vary with changes in springs, 8
spring seat heights, etc.
*** Recommended spring clearance. 2
9
10
7 12
13
14
4
8 15
6 No-Hop Option
1 (See Chart)
9
7
10
16
19 Cast
(CH)
Fabricated 18
(H) 11 17
24 25 26
5
27
20 25 21
21 28
22
22 23
23
244
(165mm)
19" ( 483mm) 49"( 1245mm) 61/2"***
8
H9700US and CH9700US
2
9
10
7
19
Fabricated Cast (CH)
11
(H)
8 12
13
1
9
10 4
14
6
19
Cast (CH)
Fabricated 11
(H)
12
13
4
5
6
21 22 23
5
24
17 22 18
18 25
19
19 20
20
246
Seat Height /4
3
11/4 13/4 21/4 2 3/4 31/4 3 3/4 41/4 4 3/4
5" Round 301-01 301-02 301-03 301-04 NR -- -- -- --
5" X 5" Square 7759-01 7759-02 7759-03 7759-04 NR -- -- -- --
4" X 6" Rect. NR 7727-02 7727-03 7727-04 NR -- -- -- --
247
7
(165mm)
19" ( 483mm) 49"( 1245mm) 61/2"*** 8 Fabricated Cast
(H) (CH)
* Str/Mt-31/2"(89mm), Un/mt & Si/mt=37/8"(99mm), Fl/mt-51/2"(140mm)
** Ref.: This dimension may vary with changes in springs, 9
spring seat heights, etc.
*** Recommended spring clearance. 2
10
11
16
Fabricated Cast (CH)
12
(H)
7
8
9 4
14 13
6
1
10
11
16 Cast
H9700 and CH9700
(CH)
Fabricated
(H) 12
21 22 23
5
24
17 22 18
18 25
19
19 20
20
248
6.5"***
22
23
109.00" 24
* Str/Mt-31/2"(89mm), Un/mt & Si/mt=37/8"(99mm), Fl/mt-51/2"(140mm)
** Ref.: This dimension may vary with changes in springs,
spring seat heights, etc.
4
*** Recommended spring clearance. 5
9
2
Fabricated Cast
(H) (CH)
3 10
20 11
H9700
and 12
CH9700
TWS
109" 18
Axle Spacing 17
9 19
21
15
10 16
1
11
12 25
26
20 Cast
(CH) 22 29
Fabricated 27
(H) 13 23 26
24 28
6 14
7 15
8
16
250
5 X 5 Axle Only 17
18
19
20
21
22
1
2
3 UNDERSLUNG TRUNNION
4 5 UNDERSLUNG AXLE
17
14
9 20
16 Pressure Plate
(Item 25) Required
19 15
25
18
12
17
13 14
8 8
7
10
24
23
5 X 5 Axle Only
21
22
143/4"
113/4" 111/2"
75"
141/2"
For suspensions with 109"
axle centers
(LH Shown)
Front Hanger Side Mount
Front Hanger Straddle Mount Front Hanger Under Mount Part No. Application
Part No. Application Part No. Application T-S-20730-01 (RH) H-9700 & H-7700
T-S-7701-01 H-9700 & H-7700 T-S-20728-01 H-9700 & H-7700 T-S-20729-01 (LH) H-9700 & H-7700
Equalizer Hanger Straddle Mount Equalizer Hanger Under Mount Equalizer Hanger Side Mount
Part No. Application Part No. Application Part No. Application
T-S-16169-01 H-9700 Suspension T-S-16171-01 H-9700 Suspension T-S-16175-01 H-9700 Suspension
(LH Shown)
Rear Hanger Side Mount
Rear Hanger Straddle Mount Rear Hanger Under Mount Part No. Application
Part No. Application Part No. Application T-S-20734-01 (RH) H-9700 & H-7700
T-S-7703-01 H-9700 & H-7700 T-S-20732-01 H-9700 & H-7700 T-S-20733-01 (LH)
258
Cast Equalizer Hanger Beam Guide Hanger Under Mount Under Mount Beam Guide
Flange Mount 97", 109", 121" Widespreads Part No. Application
Part No. Application Part No. Application T-S-7707-14 H-7700 Suspensions
T-S-16199-03 CH9700 T-S-7707-149700 Suspensions For Widespread suspensions
(A)
(B)
H-7700 113/4"
113/4"
141/2"
T-S-7750-02
shown
Cast Equalizer
Part No. Application
T-S-7750-02 7700 Suspensions
T-S-16159-01 9700 Suspensions
Includes rubber bushing
For 50 inch axle centers
using standard multi-leaf springs. Straddle Mount Equalizer Hanger Under Mount Equalizer Hanger
For 44 inch axle centers Part No. Application Part No. Application
using 751-04 six leaf springs T-S-7702-01 H7700 Suspensions T-S-7702-02 H7700 Suspensions
INSTALLATION KIT
For 7700 Series Equalizers
Kit No. NL77
Qty. Part No. Description
2 T-S-7016-01 Step Bolt
2 T-S-759-00 5/8-18X4 1/2 Hex Bolt
Side Mount Equalizer Hanger Flange Mount Equalizer Hanger
2 T-S-756-00 Sleeve Spacer
Part No. Application Part No. Application 4 T-S-37-03 5
/8-18 Hex Locknut
T-S-7702-03 H7700 Suspensions T-S-7702-05 H7700 Suspensions 1 T-S-729-00 Tab Washer, 5/8
261
"A"
Adjustable Radius Rods
Part No. "A" Dimension
T-S-16398-01 14"
Suspension Parts For T-S-16398-02 16"
H-7700 and H-9700 T-S-16398-03 16.62" Non-Adjustable Radius Rod
T-S-16398-04 19.25" Part No. Description
Suspensions T-S-16398-06 21.50"
T-S-16398-17 17" T-S-715-00 19.25" Center to Center
Includes 722-00 rubber bushings Includes 722-00 rubber bushings
3/4"
11/2"
23/16"
Bottom Plate For No-Hop Spring Spacer, 23/16" High Spring Spacer, 1.5" High
Part No. Description Part No. Description Part No. Description
T-S-10775-00 5" round axles T-S-7705-00 2.187" x 3.00" x 7.50" T-S-7028-00 1.5" x 2.75" x 7.50"