G900, K205i, K310i, K220i,K320i, K330, K510i, K530i, K550i, K610i, K630i, K660i, K750i, K770i, K790i, K800i, K810i, K850i, M600i, P1i, P990i, R300, R306, S302, S500i, T303, T650i, T700, W200i, W300i, W350i, W380i, connector or cable W550i, W580i, W595, W610i, wiring scheme W660i, W700i, W710i, W760i,W800i,W810i W850i,W880i, W890i, W900i, W902, W910i, W950i, W960i, W980, Z250i, Z310i, Z320i, Z530i, Z550i, Z555i, Z610i, Z710i, Z750i, Z770i, Z780i cell phones (new SonyEricsson Fast Port) connector pinout bookmark this page official cable is DCU-60 12 pin SonyEricsson K750i cell phone proprietary connector 3 pin stereo at the mobile phone Signal Description plug connector USB +5V in USB 5V supply - not used in K750 Related SP_REF Reference / GND for handsfree pinouts: Mic + / AUX in (left)/ short with pin 4 Mic+/AUXIN_L for handsfree answer (*) Mic - / AUX in - (right) / short with pin Mic-/AUXIN_R 3 DFMS/SP_L DFMS / Earphones left DTMS/SP_R DTMS / Earphone right VIDEO/STB Video / strobe short with pin 9 via R=130 Om for VPPFLASH handsfree detection GND Ground CTMS / USB CTMS / USB+ (data) - not used in DATA+ K750 CFMS / USB CFMS / USB- (data) - not used in K750 DATA- Battery charge (+5V) - not used in Charge In K750
Used Shortcuts:
* CTMS stands for Control To Mobile Station
* CFMS stands for Control From Mobile Station * DTMS stands for Data To Mobile Station * DFMS stands for Data From Mobile Station
Notices:
The key in near pin 1.
If you want to make a stereo converter with a SE
socket, you should use pins 5 and 6. It may not work well with an amplifier due to low output i.e. just enough power for headphones . (May need pre-amp).
Suggestion:
To make a stereo-amp using the cell phone you
must shortcircuit pins 8 and 9. Then connect the outputs (L) (R) (GND) using pins 5 = (left), 6 = (right) and 9 = (GND).