Documente Academic
Documente Profesional
Documente Cultură
August 2013
Roofing
product catalogue
Rivendale Blue/Black, Cwmanan Infant School, Aberdare (Front cover: Acme Double Camber Dark Brindle, Liverpool)
2 Introduction www.marleyeternit.co.uk
Introduction
Marley Eternits extensive range of tiles and slates,
dry fix and ventilation systems, fittings and fixings
has been successfully enhancing and protecting
our roofs for over 100 years.
The scope of product and design we offer is
underpinned by the best in customer services.
Our free Technical Advisory Service provides
expertise on all aspects of design and installation
(see also page 58).
Commitment to our customers is further
demonstrated by our Training Centre, at which
stockists and roofing contractors can learn more
about Marley Eternit products and systems
through a range of training courses.
Construction Products
Regulation and CE Mark
On the 1st July 2013 the Construction Products
Regulation came into force. This new regulation
requires all construction products covered by an
EN Standard to carry a CE Mark.
To view more information on the
regulation and our compliance
with it, or to download our product
Declarations of Performance, please visit
www.marleyeternit.co.uk/ce
www.marleyeternit.co.uk Introduction 3
Market sectors
Small element roofing can be used to create unique roof designs across all market sectors.
To see a range of our case studies, please visit www.marleyeternit.co.uk/casestudies
Renovation
Healthcare
Leisure
Public Sector
Education Housing
Clay
plain tiles
m
5m
Natural clay, machine made, single cambered
26
(longitudinal) plain tiles, offering crisp, contemporary
lines and the warmth and character of clay at an
affordable price.
Sustainability
Acme single camber A+ rated in the BRE Green Guide**
tile camber BES 6001 (Responsible Sourcing) certified
Independent carbon footprint certification
Single camber ** Based on generic rating for UK produced clay plain
tiles (Element Ref: 812410006)
Hawkins
m
5m
26
Single cambered (longitudinal), machine made clay
tile, manufactured for over 150 years. This heritage,
combined with modern firing techniques, gives a
unique colour range.
Sustainability
A+ rated in the BRE Green Guide** Hawkins tile camber
BES 6001 (Responsible Sourcing) certified
Independent carbon footprint certification
** Based on generic rating for UK produced clay plain Single camber
tiles (Element Ref: 812410006)
m
5m
26
Natural clay, machine made clay plain tiles with
longitudinal and latitudinal camber are able to
create highly textured roofscapes with accentuated
light and shade.
Sustainability
Acme double camber A+ rated in the BRE Green Guide**
tile camber BES 6001 (Responsible Sourcing) certified
Independent carbon footprint certification
Double camber ** Based on generic rating for UK produced clay plain
tiles (Element Ref: 812410006)
Ashdowne
m
5m
26
Handcrafted clay plain tiles offer a warm, mellow
appearance, with a granular texture and slight
random irregularities that make each tile unique.
Sustainability
A+ rated in the BRE Green Guide** Ashdowne tile camber
BES 6001 (Responsible Sourcing) certified
Independent carbon footprint certification
** Based on generic rating for UK produced clay plain Single camber
tiles (Element Ref: 812410006)
Concrete
plain tiles
Plain
m
7m
26
The authentic cross camber design of the
Marley Eternit concrete plain tile gives it a look
to match its outstanding versatility.
Sustainability
A+ rated in the BRE Green Guide** Concrete plain tile
BES 6001 (Responsible Sourcing) certified camber
Independent carbon footprint certification
** Based on generic rating for UK produced concrete plain Single camber
tiles (Element Refs: 812410017, 812410050, 812410064)
Fibre cement
slates
12 Slates www.marleyeternit.co.uk
300
mm
Rivendale
A finely detailed surface and dressed
m
0m
edges that together reproduce the
60
attractive appearance of natural slate.
than 50 NM/M (class B). The slates also have a minimum density
Sustainability
of 1700 kg/m3 and a nominal thickness of 4mm. A+ rated in the BRE Green Guide**
* The minimum recommended pitch and lap may be influenced BES 6001 (Responsible Sourcing) certified
by special circumstances, please contact the Technical Low carbon footprint of 13 KgCO2e
Advisory Service.
** Based on generic rating for UK and Ireland produced
fibre cement slates (Element Ref: 812410008)
www.marleyeternit.co.uk Slates 13
300
mm
Birkdale
A smooth surface and dressed edges offer
m
a traditional and pleasing look using nail and rivet
0m
60
fixing down to 20.
Technical data
Colour availability
Size of slate 600mm x 300mm
Minimum pitch*
Moderate exposure 22.5 (100mm lap)
Severe exposure 25 (100mm lap)
Moderate exposure 20 (110mm lap)
Severe exposure 22.5 (110mm lap)
Blue/Black
Maximum pitch 90
Sustainability of 1700 kg/m3 and a nominal thickness of 4mm.
A+ rated in the BRE Green Guide** * The minimum recommended pitch and lap may be influenced
BES 6001 (Responsible Sourcing) certified by special circumstances, please contact the Technical
Advisory Service.
Low carbon footprint of 13 KgCO2e
** Based on generic rating for UK and Ireland produced
fibre cement slates (Element Ref: 812410008)
14 Slates www.marleyeternit.co.uk
lo tch
pi
w
Low pitch Birkdale
Birkdale slates can be used for low pitches down to
15 (with hook fixing). This complements our Birkdale
range using nail and rivet fixing for steeper pitches.
More
(net)
Batten size 38 x 25mm for rafters/
recommended supports not exceeding
(fixed to BS 5534) 450mm centres Watch a quick video on hook fixing at
50 x 25mm for rafters/ www.marleyeternit.co.uk/birkdale
supports not exceeding
or scan the QR code below
600mm centres
Slate hooks 150mm
Slate nails 30mm x 2.65mm
(for local areas of roof)
Copper disc rivets 19mm diameter x 2mm stem
(for local areas of roof)
Sustainability
A+ rated in the BRE Green Guide**
BES 6001 (Responsible Sourcing) certified
Low carbon footprint of 13 KgCO2e
** Based on generic rating for UK and Ireland produced
fibre cement slates (Element Ref: 812410008)
www.marleyeternit.co.uk Slates 15
300
mm
Garsdale
A detailed surface and square edge that closely
m
0m
resembles natural slate, but is easier and faster
60
to install.
Sustainability of BS EN 492, achieving an average bending movement greater
than 50 NM/M (class B). The slates also have a minimum density
A+ rated in the BRE Green Guide**
of 1700 kg/m3 and a nominal thickness of 4mm.
BES 6001 (Responsible Sourcing) certified
* The minimum recommended pitch and lap may be influenced
Low carbon footprint of 13 KgCO2e
by special circumstances, please contact the Technical
** Based on generic rating for UK and Ireland produced Advisory Service.
fibre cement slates (Element Ref: 812410008)
16 Slates www.marleyeternit.co.uk
lo tch
300
mm
pi
w
Thrutone
A smooth surface and square cut edges give
m
0m
a low profile slate at an economical price with
60
a minimum pitch of 15.
Batten size 38 x 25mm for rafters/supports not Sustainability
recommended exceeding 450mm centres A+ rated in the BRE Green Guide**
(fixed to BS 5534) 50 x 25mm for rafters/supports not BES 6001 (Responsible Sourcing)
exceeding 600mm centres certified
Slate nails 30mm x 2.65mm Low carbon footprint of
13 KgCO2e
Copper disc rivets 19mm diameter x 2mm stem ** Based on generic rating for UK and
Fittings screws 14 gauge self sealing screws Ireland produced fibre cement slates
(Element Ref: 812410008)
Authority BS EN 492
Marley Eternit fibre cement slates meet the strength requirements of BS EN * The minimum recommended pitch and lap may be
492, achieving an average bending movement greater than 50 NM/M influenced by special circumstances, please
(class B). The slates also have a minimum density of 1700 kg/m3 and a contact the Technical Advisory Service.
nominal thickness of 4mm.
www.marleyeternit.co.uk Slates 17
Mendip
EcoLogic Ludlow Plus
Duo Modern
Anglia Ashmore
Wessex
Concrete
interlocking tiles
Edgemere
interlocking slates
m
0m
A clean and precise slate-like appearance
42
is enhanced by the thin leading edge and
the broken-bond laying technique.
EW
N
Maximum gauge 345mm
Tile thickness 18mm
Cover width 298mm (nominal) Smooth Grey (S) Anthracite (S)
Sustainability
A+ rated in the BRE Green Guide**
BES 6001 (Responsible Sourcing) certified
Independent carbon footprint certification
** Based on generic rating for UK produced concrete interlocking
tiles (Element Refs: 812410007, 812410018, 812410049)
Riven Edgemere
interlocking slates
m
0m
Edgemere interlocking slates are now available with a riven surface,
42
providing a finish which closely matches the appearance of natural
slate with variegated look, depth and tone.
Sustainability Advisory Service.
A+ rated in the BRE Green Guide**
BES 6001 (Responsible Sourcing) certified
Independent carbon footprint certification
** Based on generic rating for UK produced concrete interlocking
tiles (Element Refs: 812410007, 812410018, 812410049)
Duo Edgemere
interlocking slates
m
0m
An interlocking slate designed to look like
42
and blend in with small format slates.
10.5 slates/m2
at 100mm headlap
Weight of slating 44kg/m2 (0.43 kN/m2)
(approx.) at 75mm headlap
47.5kg/m2 (0.47 kN/m2)
at 100mm headlap
Battens required 2.9 lin.m/m2 at 75mm headlap
(net) 3.1 lin.m/m2 at 100mm headlap
Batten size 38 x 25mm for rafters/supports
recommended not exceeding 450mm centres
(fixed to BS 5534) 50 x 25mm for rafters/supports
not exceeding 600mm centres
Slate nails 45mm x 3.35mm
Fixing clips Eaves, verge and slate clips
Authority BS EN 490
* The minimum recommended pitch and lap may be influenced
by special circumstances, please contact the Technical
Advisory Service. Sustainability
A+ rated in the BRE Green Guide**
BES 6001 (Responsible Sourcing) certified
Independent carbon footprint certification
** Based on generic rating for UK produced concrete interlocking
tiles (Element Refs: 812410007, 812410018, 812410049)
Modern
m
A flat, smooth, single-lap interlocking design whose
0m
42
slate-like appearance is enhanced by the required
broken bond laying pattern.
Sustainability
A+ rated in the BRE Green Guide**
BES 6001 (Responsible Sourcing) certified
Independent carbon footprint certification
** Based on generic rating for UK produced concrete interlocking
tiles (Element Refs: 812410007, 812410018, 812410049)
Duo Modern
m
A flat, smooth, single lap, interlocking tile with
0m
42
a mock bond joint is enhanced by the required
broken-bond laying technique.
Sustainability
A+ rated in the BRE Green Guide**
BES 6001 (Responsible Sourcing) certified
Independent carbon footprint certification
** Based on generic rating for UK produced concrete interlocking
tiles (Element Refs: 812410007, 812410018, 812410049)
Double Roman
A 2000 year old profile with precision-engineered
m
0m
functionality.
42
Colour availability Technical data
Size of tile 420mm x 330mm
Minimum pitch* 25 Smooth (75mm headlap)
30 Granular (75mm headlap)
Old English
Dark Red (S) Mosborough Red (S) 22.5 Smooth (100mm headlap)
Maximum pitch 90
Minimum headlap 75mm
Maximum gauge 345mm
` Body thickness 28mm
Dark Red (G) Antique Brown (G)
Profile depth d > 20mm
Overall depth 53mm
Cover width 300mm (nominal)
Hanging length 397mm (nominal)
Smooth Brown (S) Smooth Grey (S) Covering capacity 9.7 tiles/m2 at 75mm headlap
(net) 10.4 tiles/m2 at 100mm headlap
Key (G) Granular finish
Weight of tiling 44 kg/m2 (0.43 kN/m2)
(S) Smooth finish
(approx.) at 75mm headlap
47 kg/m2 (0.46 kN/m2)
Greystone (G) at 100mm headlap
Battens required 2.9 lin.m/m2 at 75mm headlap
(net) 3.1 lin.m/m2 at 100mm headlap
Batten size 38 x 25mm for rafters/supports
recommended not exceeding 450mm centres
(fixed to BS 5534) 50 x 25mm for rafters/supports
not exceeding 600mm centres
Tile nails 65mm x 3.35mm
Fixing clips Eaves, verge and tile clips
Authority BS EN 490
* The minimum recommended pitch and lap may be influenced
Sustainability by special circumstances, please contact the Technical
A+ rated in the BRE Green Guide** Advisory Service.
BES 6001 (Responsible Sourcing) certified
Independent carbon footprint certification
** Based on generic rating for UK produced concrete interlocking
tiles (Element Refs: 812410007, 812410018, 812410049)
Mendip
A double pantile design with elegant flowing lines,
m
0m
instant visual appeal and exceptional strength.
42
Technical data Colour availability
Size of tile 420mm x 330mm
Minimum pitch* 17.5 Smooth (75mm headlap)
15 Smooth (100mm headlap)
Old English
30 Granular (75mm headlap) Mosborough Red (S) Dark Red (S)
25 Granular (100mm headlap)
Maximum pitch 90
Minimum headlap 75mm
Max gauge 345mm
Body thickness 27mm Dark Red (G) Smooth Brown (S)
* The minimum recommended pitch and lap may be influenced Sustainability
by special circumstances, please contact the Technical A+ rated in the BRE Green Guide**
Advisory Service. BES 6001 (Responsible Sourcing) certified
Independent carbon footprint certification
** Based on generic rating for UK produced concrete interlocking
tiles (Element Refs: 812410007, 812410018, 812410049)
Ludlow Major
Simple, strong lines exploit the interplay between
m
0m
light and shade.
42
Colour availability Technical data
Size of tile 420mm x 330mm
Minimum pitch* 25 Smooth (75mm headlap)
30 Granular (75mm headlap)
Greystone (G) Smooth Grey (S) 22.5 Smooth (100mm headlap)
Maximum pitch 90
Minimum headlap 75mm
Maximum gauge 345mm
Body thickness 25mm
Smooth Brown (S) Antique Brown (G)
Profile depth d > 11mm
Cover width 295mm (nominal)
Hanging length 399mm (nominal)
Covering capacity 9.8 tiles/m2 at 75mm headlap
Old English
Dark Red (G) Dark Red (S)
(net) 10.6 tiles/m2 at 100mm headlap
Weight of tiling 45 kg/m2 (0.44 kN/m2)
Key (G) Granular finish (approx.) at 75mm headlap
(S) Smooth finish
49 kg/m2 (0.48 kN/m2)
at 100mm headlap
Mosborough Red (S) Battens required 2.9 lin.m/m2 at 75mm headlap
(net) 3.1 lin.m/m2 at 100mm headlap
Batten size 38 x 25mm for rafters/supports
recommended not exceeding 450mm centres
(fixed to BS 5534) 50 x 25mm for rafters/supports
not exceeding 600mm centres
Tile nails 55mm x 3.35mm
Fixing clips Eaves, verge and tile clips
Authority BS EN 490
* The minimum recommended pitch and lap may be influenced
by special circumstances, please contact the Technical
Sustainability Advisory Service.
A+ rated in the BRE Green Guide**
BES 6001 (Responsible Sourcing) certified
Independent carbon footprint certification
** Based on generic rating for UK produced concrete interlocking
tiles (Element Refs: 812410007, 812410018, 812410049)
Technical data
Size of tile 420mm x 330mm
Minimum pitch* 30 Granular (75mm headlap)
Maximum pitch 90
Minimum headlap 75mm
Maximum gauge 345mm
Body thickness 25mm
Profile depth d > 11mm
Cover width 295mm (nominal)
Hanging length 399mm (nominal)
Covering capacity 9.8 tiles/m2 at 75mm headlap
(net) 10.6 tiles/m2 at 100mm headlap EcoLogic composition
Weight of tiling 45 kg/m2 (0.44 kN/m2) Photocatalytic granules stimulated by
(approx.) at 75mm headlap sunlight to remove NOx
Authority BS EN 490
Key (G) Granular finish
* The minimum recommended pitch and lap may be influenced
by special circumstances, please contact the Technical
Advisory Service.
Sustainability
A+ rated in the BRE Green Guide**
BES 6001 (Responsible Sourcing) certified
Independent carbon footprint certification
** Based on generic rating for UK produced concrete interlocking
tiles (Element Refs: 812410007, 812410018, 812410049)
Wessex
Designed to shed water efficiently at pitches down
m
0m
to 15, the Wessex has clean, simple lines with a
42
pleasing minimalist style.
Sustainability
A+ rated in the BRE Green Guide**
BES 6001 (Responsible Sourcing) certified
Independent carbon footprint certification
** Based on generic rating for UK produced concrete interlocking
tiles (Element Refs: 812410007, 812410018, 812410049)
Ludlow Plus
m
Ideal for refurbishment applications, where its
7m
38
smaller format reduces wastage.
(approx.) at 75mm headlap Key (G) Granular finish (S) Smooth finish
Advisory Service. Sustainability
A+ rated in the BRE Green Guide**
BES 6001 (Responsible Sourcing) certified
Independent carbon footprint certification
** Based on generic rating for UK produced concrete interlocking
tiles (Element Refs: 812410007, 812410018, 812410049)
Anglia
m
7m
A single-lap interlocking concrete tile
38
with the classic clay pantile profile and
a bullnosed leading edge design.
Sustainability by special circumstances, please contact the Technical
A+ rated in the BRE Green Guide** Advisory Service.
BES 6001 (Responsible Sourcing) certified
Independent carbon footprint certification
** Based on generic rating for UK produced concrete interlocking
tiles (Element Refs: 812410007, 812410018, 812410049)
Ashmore
A single lap, interlocking double plain tile,
m
7m
26
with the engineered precision and ease
of installation of an interlocking tile.
Fixing clips Eaves, verge and tile clips Ashmore three Ashmore three
quarter tile (LH) quarter tile (RH)
Authority BS EN 490
* The minimum recommended pitch and lap may be influenced
by special circumstances, please contact the Technical
Advisory Service.
484
Sustainability Ashmore
tile-and-a-half
267
A+ rated in the BRE Green Guide**
BES 6001 (Responsible Sourcing) certified
Independent carbon footprint certification
** Based on generic rating for UK produced concrete interlocking
tiles (Element Refs: 812410007, 812410018, 812410049)
Tile-and-a-half
Mono ridge
Valley Finial
Fittings &
accessories
310
Arris hip2
Granny bonnet hip Semi-bonnet hip Valley 2
125 75 125
60
185 185 185
185
305
450 or 305 305 305
450
Plain roll top 2 Club crested ridge Cocks comb crested ridge Two hole crested ridge
75-135 angles 90 and 105 angles 90 and 105 angles 90 and 105 angles
(Red Smooth and Slate Black) (Red Smooth) (Red Smooth) (Red Smooth)
Clay finials
Available in a range of colours.
770
150 550 550
305
255
Important note:
800 All of the fittings shown on this page and the feature tiles
shown opposite, can be used with all Clay Plain Tiles, but
should not be used on a rafter pitch below 35 with Acme
double camber and Ashdowne clay plain tiles.
305 1 Made to order (subject to minimum order quantities)
Dragon finial 1 2 Some colours and angles made to order
75 and 90 (subject to minimum order quantities)
Plain angle bases only Angle ridge wing length will vary depending on ridge angle
90 LH
LH
265 RH
265 90
265
265
107 265
133 165
165 248 248 RH 80
The components shown below and on page 36, are clay plain tile and fibre cement dry fix and/or
ventilation components.
The following systems can also be used with clay plain tiles and fibre cement slates:
10mm eaves vent system RidgeFast system
25mm eaves vent system HipFast system
Subject to ridge/hip tile angle.
330
Accessories
5
49
Duo pitch ridge* Stop end for duo pitch ridge* Monopitch ridge* Stop end for
(15 to 60) (15 to 55) (20 to 45) monopitch ridge*
(20 to 45)
450
Roll top ridge* Stop end for roll top ridge* In-line ridge ventilator Right angle return ridge
(30, 45) (30, 45) plus extension sleeve (20 to 45)
(20 to 45)
300
600
162
160
247 88 88 298
457 457
457 248 248 457
Modern mono ridge Segmental ridge* Segmental security ridge Segmental mono ridge
15-45 bedded 15-55 dry ridge 15-50 bedded 15-55 dry ridge
162
162
265
298 457
247 75.5
457 457 457
219 135
Segmental mono block Modern mono block end 1/3 round hip tile Segmental block end ridge*
end ridge 15-55 dry ridge ridge 15-45 17.5-45 dry ridge 15-55 dry ridge
255
457 122
84 457 65
457 325
218 150
150 265
Modern block 125 Angle ridge hip 15-25 90 Angle ridge/hip Pascoll roll baby ridge
end ridge* Security 125 Angle ridge/hip 15-25 45-50 bedded 15-45
15-55 dry ridge Also available: Also available:
145 Angle ridge hip 15-22.5 Security 90 Angle
Security 145 Angle ridge/hip 15-22.5 ridge/hip 45-50
70
300
150
1/2 round baby ridge Ridge vent terminal Gas vent ridge terminal
15-55 15-55 dry ridge 15-55 dry ridge
Also available:
Gas vent ridge for condensing boilers
Modern ridge 15-55
www.marleyeternit.co.uk Segmental ridge 15-55 Fittings & accessories 37
Concrete fittings
267
267
35
168 200 248 267 167
118 87
Plain eaves/top tile Plain tile-and-a-half R/H Internal angle R/H External angle
178
267 60
315
208 300
113 273
275 338
285
R/H Cloak verge tile Valley tile Arris hip Bonnet hip
35-50 35-40 35-50
ils ck
the quantities packaged
ils k
ils k
na pa
na c
na c
d pa
d pa
s il p e
d ck
d ck
d il
ip a g
ils
ils
together with the
ip a e
an na
an nail
an nail
cl d n ver
an a
an a
cl d n erg
na
na
s il p
ck
ip nd
50 an d v
50 an nd
ip d
ip d
pa
correct sized nails.
cl a
cl n
cl n
ip a
0 pa
0 pa
ip n
0 lip
il
cl t h
cl ha
s
na
10 c
10 cli
50 cli
gh
ft
ve
0g
Le
le
le
Ri
Ea
50
Ti
Ti
Code Pack Code Pack Code Pack Code Pack Code Pack Code Pack Approx.
No. No. No. No. No. No. No. No. No. No. No. No. Count
Aluminium alloy
Ludlow Plus 30265 1 30266 6 30290 33 30290 33 30277 22 30350 27 396
Anglia 30269 3 30270 8 30284 12 30286 14 30274 19 30349 26 520
Ludlow Major 30265 1 30266 6 30287 15 30287 15 30277 22 30371 32 373
Mendip 30267 2 30268 7 30288 16 30287 15 30276 21 30352 29 287
Double Roman 30271 4 30272 9 30289 17 30290 33 30275 20 30351 28 308
Wessex 30267 2 30268 7 30286 14 30286 14 30278 23
Modern 30265 1 30266 6 30290 33 30290 33 30273 18 30350 27 396
Duo Modern 30265 1 30266 6 30290 33 30290 33 30273 18 30350 27 396
Edgemere range 30295 5 30296 10 30263 11 30263 11 30297 24 30398 31 432
Ashmore* 30263 11 30263 11 30297 24 30398 31 432
Plain 30348 25 793
Stainless steel
Anglia 30102 41 30111 51 30121 61 182
Mendip 30103 42 30112 52 30123 63 99
Double Roman 30104 43 30116 56 30124 64 109
Wessex 30103 42
Edgemere range 30105 44 30115 55 30125 65 109
Ashmore 30130 34 30131 35 30125 65 109
Plain 30126 66 302
Ludlow Plus 30110 50 30120 60 137
Ludlow Major For tile clip and nail solutions for 30110 50 30127 67 137
Modern these profiles, use Solo-Fix 30114 54 30120 60 137
Duo Modern 30114 54 30120 60 137
* Clips only
Wessex eaves clip and nail pack only available in aluminium alloy.
gic
rn
Lo
de
co
tes
iles
Mo
&E
e
sla
ng
in t
n
uo
iles
ma
Ra
jor
nt
pla
&D
s
me
in t
Ma
Plu
Ro
re
te
ore
me
ce
pla
x
rn
ip
cre
w
ble
se
glia
de
nd
hm
dlo
dlo
ge
re
s
y
We
Cla
Mo
Me
Co
Fib
Do
Ed
An
As
Lu
Lu
roofing accessories
10mm eaves vent system
25mm eaves vent system
Dry verge
HipFast
RidgeFast
Tile vent
GRP dry valley system
Ridge Roll
Dry verge
Cloak verge system *
Slate verge trim
Edgemere dry verge
Ashmore dry verge
Dry hip
Dry hip system
Dry hip with duo pitch ridges
Dry valley
Plain tile valley
GRP interlocking slate dry valley system
Ventilation terminals
Gas vent ridge terminals
Ridge vent terminals
In-line vents and contour vents
Tile vent terminals
Ventilation roof tile
Ridge vent for condensing boiler
* Suitable for Modern only
10 and 25mm eaves ventilation Dry verge system Universal HipFast system
Universal 10mm eaves vent 28 No. left hand units 391* (6m pack)
system (6m pack) 46350 28 No. right hand units 392* - 6m length hip roll
- 6m eaves rafter roll - 6 No. batten brackets
Fixing kit (also available) 39300
- 10 No. felt support tray - 13 No. hip unions
End caps
- 6 No. strip ventilator HipFast fixing kit 34001
Modern ridge 394*
Universal 25mm eaves vent - 24 No. tile head C clips
Segmental ridge 395*
system (6m pack) 46351
- 36 No. tile tail clips
Modern mono-ridge Left hand 408*
- 6m eaves rafter roll
Right hand 409* Hip support trays 34002
- 10 No. felt support tray
Segmental mono-ridge Left hand 427* - 9 No. 715mm
- 6 No. strip ventilator
Right hand 428*
Comb filler strip 30425
Dry verge refurbishment kit 35800
Continuous rafter roll (2 x 6m) 46323
* Suffix with colour code 01 Grey,
03 Brown, 04 Terracotta
Technical toolkit
Marley Eternits website features helpful tools that make
design and specification as straightforward as possible.
www.marleyeternit.co.uk/resources
Simple and rapidly installed dry fix Designed for roof void ventilation Mortar free solution suitable for use
system providing 5mm continuous and connection to 110mm soil/ with concrete interlocking tiles/slates
ridge ventilation and compatible mechanical extract system. and concrete/clay plain tiles.
with all tiles and slates up to 40 Compatible with large format Suitable on rafter pitches from 17.5
(suitable up to 60 subject to interlocking tiles (including 15 x 9 to 60 and accommodates up to 20
tile/slate profile). tiles) and roof pitches 20 and above. pitch difference either side of valley.
Universal RidgeFast system 33000 Universal Tile vent Universal GRP dry valley
(6m pack) Grey 36700 (3m lengths)
- 6m length ridge roll Brown 36703 low profile 30422
- 10 No. ridge batten brackets Terracotta 36704 high profile 30421
- 13 No. ridge union straps Flexible pipe 39091
- 13 No. ridge union clamps
- 13 No. 75mm x 4.8mm s/s screws
- 40 No. 25mm x 2.65mm s/s ARS nails
RidgeFast roll applicator 33002
(optional )
RidgeFast blanking tape 33001
(optional)
Designed for natural, mechanical Simple and rapidly installed dry fix For both new and refurbishment
or soil pipe ventilation. Provides system providing 5mm continuous work, provides a mechanically
10,000mm2 free area of ventilation ridge ventilation. Compatible with fixed, durable, maintenance free
and suitable for roof pitches 20 fibre cement slates and ridges. verge solution for rafter pitches
and above. up to 55 with fibre cement slates
and natural slates.
Universal plain tile vent Ridge roll 33010 Slate verge trim (illustrated above)
Grey 45501 Fibre cement ventilated Fibre cement slates (3 metre) MA42206
Brown 45502 dry ridge (illustrated above) Ashmore dry verge
Red 45504 Duo pitch ridge (no code)
Verge section (3 metre) 38501
Clay Red 45505 Stop end for duo pitch ridge (no code)
Fixing kit 38510
Clay Brown 45506
Roll top ridge (no code)
Flexible pipe
Stop end for roll top ridge (no code)
ID 110mm (sold separately) 39091
Ventilated ridge roll (no code)
Technical toolkit
Marley Eternits website features helpful tools that make
design and specification as straightforward as possible.
www.marleyeternit.co.uk/resources
Provides a mechanically fixed, Compatible with Edgemere slates, Suitable for tiles and slates when
durable, maintenance free verge installed at 75mm-115mm head used in conjunction with Third
solution. Suitable up to 45 for lap and rafter pitches from 17.5 to round or Modern hip tiles for
Mendip, Modern, Double Roman 45 (suitable up to 55 when used roof pitches up to 45.
tiles and 55 for plain tiles. with the 'steep pitch ridge batten
section', see Dry ridge system).
The GRP Valley for large format Mechanically fixed, weathertight and mortar free solution providing
tiles and Slate GRP Dry Valley for 5mm continuous ridge ventilation. Suitable for concrete tiles and slates,
fibre cement slates are both and fibre cement slates when used in conjunction with Segmental or
suitable for roof pitches from 22.5 Modern ridge tiles for roof pitches up to 55.
to 45.
Slate GRP dry valley (illustrated above) Batten sections Filler units
(for fibre cement slates) 30578 Plain tile 41099 Double Roman filler unit - vented 42105
Low profile 41101 Plain / Modern / Duo Modern /
High profile 41201 Edgemere filler unit - vented 41501
Steep pitch (low profile) 41102 Double lap slates filler unit - vented 41703
Steep pitch (high profile) 41202 Ludlow Major filler unit - vented 41601
Technical toolkit
Marley Eternits website features helpful tools that make
design and specification as straightforward as possible.
www.marleyeternit.co.uk/resources
Suitable for soil/mechanical Available in a wide range of Discreet high performance vent
ventilation. Provides high level colours and finishes provides terminals for high/low level roof
ventilation for concrete tiles for high/low level roof space space ventilation. Suitable for
(9,500mm2 free area), clay ventilation. Suitable for soil and mechanical ventilation.
plain tiles or fibre cement slates soil/mechanical ventilation Minimum roof pitch 22.5
(10,000mm2 free area). (except Ashmore). (except Plain tiles 35).
Mortar bedded security ridge kit 43605 Mortar bedded security hip kit 43606
(illustrated above) (illustrated above)
- 10 No. batten brackets - 6 No. batten brackets
- 13 No. clamps - 13 No. clamps
- 13 No. 75mm x 4.8mm s/s screws - 13 No. 75mm x 4.8mm s/s screws
- 40 No. 25mm x 2.65mm s/s ARS nails - 40 No. 25mm x 2.65mm s/s ARS nails
Hip tail clip pack 43602
Headl clip pack 43604
More More
Watch a quick video on mortar Watch a quick video on mortar
bedded mechanical fixing at bedded mechanical fixing at
www.marleyeternit.co.uk/securityridge www.marleyeternit.co.uk/securityhip
or scan the QR code below or scan the QR code below
Technical toolkit
Marley Eternits website features helpful tools that make
design and specification as straightforward as possible.
www.marleyeternit.co.uk/resources
Sustainability
Facades Cedral
Other products
www.marleyeternit.co.uk Services 49
Profiled Sheeting
Bracken* Sherwood*
Natural Grey
Anthracite
C04 Dark Brown C05 Grey C06 Grey Green C07 Cream White
(Nearest RAL 8019: Grey Brown) (Nearest RAL 7047: Telegrey) (Nearest RAL 9001: Cream)
C08 Sand Yellow C09 Ochre C10 Blue Grey C11 Beige Yellow
(Nearest RAL 1014: Ivory) (Nearest RAL 1000: Green Beige) (Nearest RAL 7001: Silver Grey) (Nearest RAL 1001: Beige)
C12 Lavender Blue C13 Lilac Blue C14 Atlas Brown C15 Dark Grey
(Nearest RAL 5014: Pigeon Blue) (Nearest RAL 7046: Telegrey)
C16 Cevennes Green C17 Oriental Green C18 Slate Grey C30 Brown
(Nearest RAL 8024: Beige Brown)
C31 Pine Green C32 Orange Brown C33 Red C50 Black
(Nearest RAL 6009: Fir Green) (Nearest RAL 8023: Orange Brown) (Nearest RAL 3009: Oxide Red) (Nearest RAL 9017: Traffic Black)
Woodstains
Cedral Weatherboard is also available in a range of woodstain shades
to simulate the colour and texture of a variety of timber stocks.
CL102 Pine CL103 Ebony CL104 Light Oak CL105 Dark Oak
C50 Black
Sustainability
Assets CAD
Services
56 Services www.marleyeternit.co.uk
Installation and fixing guidance
A comprehensive Sitework guide is available on
request, covering all aspects of delivery, storage,
preparation and installation. Its more than 200 pages
of excellent advice on all Marley Eternit roofing
products in a handy A5 format for easy use on site.
Visit www.whydryfix.co.uk
for more information
www.marleyeternit.co.uk Services 57
Technical toolkit
tools and support that make design and
specification as straightforward as possible
marleyeternit.co.uk/cad marleyeternit.co.uk/selector
Tilefix Estimator
Tool to create fixing Tool designed to create a
specifications based on complete bill of materials for
the geographical location your roofing project, based
and building dimensions on a wide range of roof shapes.
of specific roofing projects.
marleyeternit.co.uk/tilefix marleyeternit.co.uk/estimator
marleyeternit.co.uk/specrite marleyeternit.co.uk/bim
58 Services www.marleyeternit.co.uk
430.638 A5 guide 07:430.214 A5 guide Jan 2007 v1 6/8/13 15:07 Page 59
Resources
marleyeternit.co.uk/samples marleyeternit.co.uk/resources
marleyeternit.co.uk/stockists marleyeternit.co.uk/resources
marleyeternit.co.uk/training marleyeternit.co.uk/localcontacts
www.marleyeternit.co.uk Services 59
Storage, handling and mixing General notes
All tiles and slates are palletised to aid customers in This publication is based on the latest information
the movement of materials on site and in the yard. available at the time of printing. Due to product
changes, improvements and other factors, Marley
Shrink wrapping provides additional protection prior
Eternit reserves the right to change or withdraw
to use.
information contained herein without prior notice.
Remember, all slates and tiles, especially
variegated and granular faced tiles, should be The information contained herein is based
mixed from different pallet loads whilst the roof on Marley Eternits current recommendations
is being loaded to enhance the appearance intended for general roof applications, but where
when laid. non-standard situations occur or where abnormal
site exposure conditions apply, users must satisfy
Siteworking themselves as to the suitability of the
The Control of Substances Hazardous to Health recommendations given. Furthermore, the advice
Regulations (COSHH), requirements of The Health given in isolation should not be taken as providing
and Safety at Work Act, The Consumer Protection any guarantee of the performance or suitability of
Act and The Chemicals (Hazard Information and the product for specific applications. For specific
Packaging for Supply) Regulations, requires us to applications users should refer to the relevant
provide relevant information regarding our products Standards and Codes of Practice for guidance or
in respect of its properties, correct use, storage/ contact the Technical Advisory Service for advice.
handling and disposal without risk to health. Efflorescence can occur from time to time in all
To view or download copies of our COSHH data products with a high cement content, but is a
sheets please visit www.marleyeternit.co.uk/coshh temporary effect and is not detrimental to the
function of the product. Natural weathering will
remove the salt deposits that cause this
harmless effect.
Customer Services
T 08705 626400 F 08705 626450 E info@marleyeternit.co.uk
www.marleyeternit.co.uk
Marley Eternit Limited, Lichfield Road, Branston, Burton on Trent, DE14 3HD