Documente Academic
Documente Profesional
Documente Cultură
Solventless
Radiation Cure Range
UV POLY ~350 n Epoxy base polymer UV RCA ~600 n Premium release additive
200 n Medium release 200 n Low migration
n Very low extractables n Suitable for label & tape applications
n Low back side transfer
UV RCA ~800 n Premium release additive
UV POLY ~3500 n High viscosity epoxy base polymer 210* n Well suited to bulk adhesive
201 n Excellent holdout on porous applications
substrates
n Adapted to flexo coating technology UV RCA ~2500 n Tight release additive
n Medium release 251 n Suitable for many 2 side tape
n Very low extractables applications
UV POLY ~50 n Low viscosity epoxy base polymer UV PC-675* ~2500 n Premium release additive
204 n Medium release n Reduces co-efficient of friction
n Very low extractables n Well suited to bulk adhesive
n Low back side transfer applications
n Reactive diluent for coating quality
improvement
pemaco - Photos: Cover: Tetra Images / GraphicObsession - PaulPaladin / Shutterstock. Inside: Alberto Tirado / Shutterstock
20000
C radiation due to the incorporation of patented
Iodonium Borate photoinitiator technology. This 0
190 210 230 250 270 290 310 330 350
140
120
100
80
RCA200 effect - TESA 4651 SBR adhesive
60 RCA200 effect - TESA 4970 acrylic adhesive
RCA251 effect - TESA 4970 acrylic adhesive
40
20
3-2 Radiation
0
10 20 30 40 50 60
RCA CONTENT (%)
www.bluestarsilicones.com
The information contained in this document is given in good faith and based on Bluestar Silicones current knowledge.
Bluestar Silicones makes no representation or warranty as to the accuracy, completeness of such information or as
to the compatibility of such information with the users intended application : information is supplied on an as-is basis
and is not binding on Bluestar Silicones. Nothing contained herein is intended as a recommendation to use the products
so as to infringe any patent.
Bluestar Silicones assumes no liability for users violation of patent or other rights and disclaims any liability for loss, injury
or damage which may result from the use of the products. Therefore, information contained herein must not be used as a
substitute for necessary prior tests which are the sole responsibility of the user and which alone can ensure that a product
is suitable for a given use.