Documente Academic
Documente Profesional
Documente Cultură
a) 38% b) 40 % c) 42 % d) 44%
a) Dry-Moist process b) Burning process c) Dry -wet process d) Moist wet process
a)Must not exceed 20% b) Must exceed 10% c) Must not exceed 15 %
18) Needle size of vicats apparatus in case of initial setting time test of cement is
a) 10 mm b) 15 mm c) 1 mm d) 2 mm
a) To check fineness b) to check strength c) to find initial setting time d) to check soundness
24) What should be the standard value of aggregate crushing test for road construction?
a) Should not be more than 30% b ) should be more than 45% c) should not be more than
50% d) Should not be more than 35%
25) Which type of aggregate is good for workability according to their shape?
a) Loss angels test b) crushing value test c) impact test d) soundness test
a) more than 6.3 mm b) less than 6.3 mm c) less than 4.75 mm d) more than 4.75 mm
a) flakiness test b) elongation test c) Fineness modulus test d) All of the above
b. Increases bleeding
c. Increases shrinkage
d. Increases strength
37. Most common used admixture which prolongs the setting and hardening time is
e. Gypsum
f. Calcium chloride
g. Sodium silicate
h. All of above