Documente Academic
Documente Profesional
Documente Cultură
3. Once the run mode appears, press and hold on the ESC button
for 3-4 seconds: the display will show the Plug & Play mode:
PRESS ENTER
4. Press ENTER: the instrument will start searching for the probes
WAIT.
FOUND: NO PROBE
FOUND: NO PROBE
PRESS ENTER
DONE
7.4 pH
ENTER
FOUND: pH 1
FOUND: Rx 2 200 mV
20.5
1. if you want to connect two sensors of the same type, e. g. 2 oxygen sensors,
before doing the plug & play procedure, do the following: