Sunteți pe pagina 1din 7

Computer Networking

Configuring and Sharing Dial-Up Internet Connection


(Windows XP)
To connect with internet via dial-up follow these steps:-

Note: First physically attach the modem and install its driver, then follow the next steps:

My network place ==> properties

Click on Create a new connection

Click on Next

1
K. Seyoum 2012/13
Computer Networking

Choose connect to the internet

Now choose Connect using a dial-up modem

2
K. Seyoum 2012/13
Computer Networking

Select Set up my connection manually

Fill your ISP's (Internet Service Provider) name

3
K. Seyoum 2012/13
Computer Networking

Now fill the number provided by your ISP (Be careful about these dialing number you will never
be able to connect with your ISP in case of mistaken)

Check mark the Add a shortcut to this connection to my desktop

4
K. Seyoum 2012/13
Computer Networking

Now you can dial from your desktop directly

Double click on short-cut

Give your user name and password (will be provided by your ISP's)

5
K. Seyoum 2012/13
Computer Networking
Now you can see dialing process

After few seconds later (depending on your ISPs speed) you will be successfully connect
through internet. Now can surf on net

Next step is how to share the dial up connections?


My network places ==> properties ==> Right-click your Internet connection and select Properties.

6
K. Seyoum 2012/13
Computer Networking
Click the Advanced tab and you will see the following dialog box. Click Allow other network
users to connect through this computers Internet connection.

Enabling Internet Connection Sharing will change your IP address to 192.168.0.1 and enable a
simple DHCP server on your computer. If you have already chosen another IP address range,
you will have to reconfigure any Static IP addresses you may have configured. Your devices and
computers with dynamically set IP addresses will change next time you start them, and they will
then be able to access the Internet.

7
K. Seyoum 2012/13

S-ar putea să vă placă și