Sunteți pe pagina 1din 7
o Blank Firing Attachment @ for Stoner Weapons System, cal. 5,56 mm DE KRUITHOORN | and N-16 Rifle, cal. 5,56 mm page 1 Introduction * To fire blank cartridges cal. 5,56 mm with subject weapons a Blank Firing Attachment (BFA) is necessary. The barrels of subject weapons are of five configurations, which may not be changed or modified to accept the BFA. The BFA must fit on barrel - Stoner Assault Rifle - Stoner Carbine - Stoner LMG, Magazine Feed Stoner LMG, Belt Feed M-16 Rifle The BFA must be attached safely and simply without using any tools. All mentioned weapons should function in automatic fire, with the BFA attached. z Damages to the weapons are not allowed, and the life-time of the BFA should be at least equivalent to the life-time of any vital weapon part. The overall weight of the BFA must be as low as allowed by safety precautions. The BFA, designed and developed by NWN, meets all these requirements. Description On all subject weapons the BPA is fitted to the flash-suppressor, which is of tvo different types (please refer to attached drawing nr. M 27226, marked M16 and Stoner Weapons System). However the external diameters of both types of flash-suppressor may considered identical for all practical purposes. The BFA consists of three main parts: - Clamping Fixture (1) - Housing (2) - Mounting Pin with gas-channel (3) > VK-=vG/HP 16 Jan 67 Cae aa WWW .SMALLARMSOFTHEWORLD.COM @... Piring Attachment e for Stoner Weapons System, cal. 5,56 mm DE KRUITHOORN | and M=-16 Rifle, cal. 5,56 mm page 2 The clamping fixture is cut in two pieces along~the axis, Thereafter the two pieces are connected again in such a way, that the clamping fixture can be easily opened and closed. On the inside of the clamping fixture an extention is present, which fits in the forward groove (4) of the flash-suppressor of the M16. Fitted on the flash-suppressor of the Stoner Weapons System, the inner diameter of the clamping fixture fits around the flash-suppressor at its smallest diameter. The clamping fixture is fitted around the flash-suppressor and closed. Next the housing is screwed on the clamping fixture. The thread of the clamping fixture is cone-shaped to compensate for any minor differences in diameter of the flash-suppressor. The outside of the housing is knurled, in order to allow a firm grip with bere hands. Finally the mounting pin is screwed into the housing and firmly tightened by hand. On the M16 the cylindrical part (6) of the mounting pin fits into the cylindrical part of the flash-suppressor, which assures a gastight fit. * On the Stoner Weapons System the same assembling method is followed. Here the closing-of of the barrel is achieved by the cone (9) of the mounting pin, which cone, in its dimensions, is identical to the cone of the flash-suppressor. The gasport (10) is chosen at such a diameter that the required eyclic rate of fire is accomplished. For all Stoner weapons using the NWM-IVK blank cartridges cal. 5,56, with allongated neck, one diameter of the gas-channel in the mounting pin is used. (diameter 2,5 ty For the M16 rifle a mounting pin with a gas-channel diameter of 2 mm has to be used. VK-vG/HP 16 Jan 67 NS | 8 BLANK FIRING ATTACHMENT FOR STONER COLT AR-15(M-16)RIFLE, CAL556mm = _ WEAPONS SYSTEM, CAL 556mm AND YN fp NF BFA ON FLASH-SUPPRESSOR OF STONER WEAPONS SYSTEM ee a ee DEKRUITHOORNNY. |. ; SSS é VLE dee ae mabe : a2) Kee

S-ar putea să vă placă și