Documente Academic
Documente Profesional
Documente Cultură
mounted on base
Plate-mounted horizontal pump :
NOS 65-200-08
ISO 5199
Pressure curve
70
min
max
max
60 NPSH
System curve
Required
50
30
Characteristics requested :
20
Liquid Water
Temperature (C) 30
Flow rate requested 10
90.00
(m3/h)
Requested Head (mCE) 60.00
Operation On load pump 0
0 20 40 60 80 100 120 140 160 180 200
Q (m3/h)
Suggested characteristics :
25
Input power (kW)
Pump characteristics :
20
Assembly Off-line
Impeller EN-GJL-250 Cast iron 15
Pump casing EN-GJL-250 Cast iron
420 regular / Stainless
Pump shaft
steel 10
Casing cover EN-GJL-250 Cast iron
Mechanical seal Carbon/Ceramic/EPDM
Spacer No 5
Plugs C 22E Steel
0
0 20 40 60 80 100 120 140 160 180 200
Operating limits :
Driven by Diesel Engine for fire pump :
Maximum working pressure (bar) 10-16
Manufacturer LOMBARDINI Minimum temperature (C) -20
Original ITALY Maximum temperature (C) 135
Model LDW1603
Rate 30 KW@ 3000rpm
No of cylinders 03
Type of Starter Battery 12VDC
Cooling type Water - Cooled
Engine on baseplase with Coupling & guard
The data displayed are subject to evolution at any time and aren't crontractuals. Salmson reserve the right to modify them without prior notice.
Standardized horizontal pump
mounted on base
Plate-mounted horizontal pump :
NOS 65-200-08
Dimensional characteristics :
Mass(kg) 300
Suction - DN / Connection DN 80
Discharge - DN / Connection DN 65
The data displayed are subject to evolution at any time and aren't crontractuals. Salmson reserve the right to modify them without prior notice.