DETERMINE THE SHEAR STRENGTH OF Al-Al2O3 METAL MATRIX
COMPOSITE RIVET
ABSTRACT
MMCs in general, consists of at least two components, the
metal matrix and the reinforcement. Aluminium and its alloy have the most attention, as the matrix material for MMCs and the reinforcement is alumina particles.Aluminium alloy and the Alumina particle has been chosen as matrix and reinforcement material respectively. Experiments have been conducted by varying weight fraction of alumina particle (5%, 10%,15% and 20% ),While keeping all other parameters constant. The result indicated that the MMCs are quite successful to obtain better reinforcement in the matrix . An increasing trend of shear strength properties with increase in weight percentage of alumina particles has been observed.Microstructural analysis was carried out using SEM.SEM micrographs indicate that Al2O3 particulates homogeneously distributed in aluminum matrix. Al-5%Al2O3 gives the lower bulk density and Al-20%Al2O3 gives the highest hardness value .The density and the hardness value of composite samples increase with the increasing of weight percentage.