Documente Academic
Documente Profesional
Documente Cultură
IX-2015
FORM
15
Organization Name
Revision No.
Welding Process(es)
JOINTS (QW-402)
Joint Design
Root Spacing
Backing: Yes
Backing Material (Type)
Metal
Nonmetallic
Sketches, Production Drawings, Weld Symbols, or Written Description
should show the general arrangement of the parts to be welded. Where
applicable, the details of weld groove may be specified.
Sketches may be attached to illustrate joint design, weld layers, and bead
sequence (e.g., for notch toughness procedures, for multiple process
procedures, etc.)]
P-No.
OR
Base Metal:
1
Maximum Pass Thickness /2 in. (13 mm)
Other
Weld Metal
Deposited Thickness:
Groove
Fillet
Electrode-Flux (Class)
Flux Type
Consumable Insert
Other
(07/15)
307
ASME BPVC.IX-2015
POSITIONS (QW-405)
Position(s) of Groove
Welding Progression: Up
Position(s) of Fillet
Other
PREHEAT (QW-406)
Preheat Maintenance
Other
Weld
Pass(es) Process
Amps and volts, or power or energy range, should be specified for each electrode size, position, and thickness, etc.
Pulsing Current
Other
TECHNIQUE (QW-410)
String or Weave Bead
Orifice, Nozzle, or Gas Cup Size
Initial and Interpass Cleaning (Brushing, Grinding, etc.)
(07/15)
308
ASME BPVC.IX-2015
Organization Name
Procedure Qualification Record No. Date
WPS No.
Welding Process(es)
Types (Manual, Automatic, Semi-Automatic)
JOINTS (QW-402)
Material Spec.
SFA Specification
AWS Classification
Flux Type
Other
POSITION (QW-405)
Position(s)
Other
PREHEAT (QW-406)
Preheat Temperature
Interpass Temperature
Other
(07/15)
309
ASME BPVC.IX-2015
Specimen
No. W
Specimen
No.
Comments
Macro Results
Other Tests
Type of Test
Deposit Analysis
Other
Welders Name
Tests Conducted by
We certify that the statements in this record are correct and that the test welds were prepared, welded, and tested in accordance with
the requirements of Section IX of the ASME Boiler and Pressure Vessel Code.
Date
(Detail of record of tests are illustrative only and may be modified to conform to the type and number of tests required by the Code.)
(07/13)
310