Documente Academic
Documente Profesional
Documente Cultură
clculo MPS
NF (necesidad Fabricacin) = EI (el stock inicial) - D (demanda) - ES (stock de
seguridad)
si NF es positiva, entonces MPS = 0
si NF es negativo, el MPS ser sin valor de la seal, ajustado al tamao de lote.
ejemplos:
NF= 25-40-25=-40 tamao de lote = 30 = 60 = MPS (MPS = 40, pero se ajust
a 30 con mltiples pocillos).
NF = 60-20-10 = 30 MPS = 0
EF (Stock final) = EI + MPS - D
EI - EF perodo anterior
Para cada producto, tome las demandas totales, considerar el inventario inicial,
determinar en qu semana la cairla final stock por debajo de la de la
legalmente prescrita (ES) por lo tanto requieren la produccin y programar un
lote de producto que se va Producido durante estas semanas.
Asegrese de que la lnea de MPS son todos los mltiplos de los valores del
lote (0,50,100,150 ...) en este caso, y asegrese de que las lneas de inventario
final todos los valores estn por encima de las existencias de seguridad (30 en
este caso).
Asegrese de que la lnea de MPS todos son varios valores del montn
(0,60,120,180 ...) en este caso, y asegrese de que las lneas de inventario
final todos los valores estn por encima de las existencias de seguridad (40 en
este caso).
formula
NF (Manufacturing requirement) = EI (the initial stock) - D (demand) - ES
(security stock)
If NF is positive, then MPS = 0
If NF is negative, the MPS will be without signal value, adjusted to the lot size.
Examples:
NF = 25-40-25 = -40 batch size = 30 = 60 = MPS (MPS = 40, but adjusted to 30
with multiple wells).
NF = 60-20-10 = -30 MPS = 0
EF (Final Stock) = EI + MPS - D
EI - EF previous period
For each product, take the total demands, consider the initial inventory,
determine in which week the final stock will fall below the legally prescribed
(ES) therefore require production and schedule a batch of product that is
produced during These weeks.
Make sure the MPS line is all multiples of lot values (0,50,100,150 ...) in this
case, and make sure that the final inventory lines all values are above the
security stocks (30 in this case).
Now turn, do the following exercise and elique next slide to see if the calculation
is correct.
Make sure the MPS line all are several heap values (0,60,120,180 ...) in this
case, and make sure that the final inventory lines all values are above the
security stock (40 in this case ).