Sunteți pe pagina 1din 2

APX_7000_TopD.

book Page 3 Tuesday, November 20, 2012 11:26 AM

m 16-Position Antenna
Receiving and Transmitting
Select Knob
ASTRO APX 7000 Series __________
1 Select zone/channel.
Digital Portable Radios 2 Listen for a transmission.
Quick Reference Card On/Off/Volume OR
RF ENERGY EXPOSURE AND PRODUCT SAFETY Control Knob Press and hold Volume Set button.
GUIDE FOR PORTABLE TWO-WAY RADIOS OR
Before using this product, read the operating instructions Top Press Monitor button and listen for activity.
! for safe usage contained in the Product Safety and RF
Top Side (Select)
Display
Caution Exposure booklet enclosed with your radio.
Button
3 Adjust volume, if necessary.
ATTENTION! Bluetooth
__________
This radio is restricted to occupational use only to satisfy Pairing 4 Press the PTT button to transmit; release to
FCC RF energy exposure requirements. Before using this Indicator receive.
product, read the guide enclosed with your radio which contains
Main
important operating instructions for safe usage and RF energy
awareness and control for compliance with applicable standards PTT Button Speaker
and regulations. Sending an Emergency Alarm
Radio Controls Side Button 1 1 Press and hold the Emergency button*.
__________
Top (Orange) 3-Position A/B/C Switch
Button __________________
Battery 2 The display shows EMERGNCY and the
__________ current zone/channel. A short, medium-
Side Button 2 pitched tone sounds, and the LED blinks red
__________ momentarily.
3 When acknowledgment is received, you hear
Radio On/Off four beeps; alarm ends; and radio exits
Accessory emergency.
Connector On On/Off/Volume knob clockwise.
2-Position * Default emergency button press timer is set
Concentric Switch Off On/Off/Volume knob counterclockwise.
______________ to 1 second. This timer is programmable, see
page 33 in the user guide for details.
Zones and Channels To exit emergency at any time, press and hold
Zone Zone switch to desired zone. the Emergency button.

Channel Channel switch to desired channel.


*68007024033*
MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All 68007024033-E
other trademarks are the property of their respective owners. 20092012 by Motorola Solutions, Inc. All Rights Reserved. 11/12.
1303 East Algonquin Road., Schaumburg,Illinois 60196, U.S.A.
English
APX_7000_TopD.book Page 4 Tuesday, November 20, 2012 11:26 AM

Sending an Emergency Call Display Status Icons


Aor Basic Zone Bank 1
1 Press the Emergency button.
Bor A = Radio is in Zone 1.
2 Press and hold the PTT button. Speak clearly U Blinks when the battery is low.
C
B = Radio is in Zone 2.
C = Radio is in Zone 3.
V
v
into the microphone. The more stripes, the stronger the
signal strength for the current site
3 Release the PTT button to end call. (trunking only). Dor Basic Zone Bank 2
4 Press and hold Emergency button to exit
emergency. O
Direct radio to radio communication or
connected through a repeater.
Eor D = Radio is in Zone 4.
E = Radio is in Zone 5.
On = Direct F F = Radio is in Zone 6.
To exit emergency at any time, press and hold Off = Repeater
the Emergency button.
M This channel is being monitored.
Enhanced Zone Bank
A = Contains Zone 1, Zone 2 and Zone
Sending a Silent Emergency Call AB
, , 3,
1 Press the Emergency button. H L LH == Radio
OR
is set at Low power.
Radio is set at High power. C... ...
B = Contains Zone 4, Zone 5 and Zone
6,
2 The display does not change; the LED does
i Scanning a scan list. x or C = Contains Zone 7, Zone 8 and Zone
not light up, and there is no tone. 9,
3 Silent emergency continues until you:
Blinking dot = Detects activity on the y .
.
j
Priority-One Channel
Press and hold the Emergency button to exit
during scan. .
emergency state.
Steady dot = Detects activity on the X = Contains Zone 70, Zone 71 and
OR
Priority-Two Channel Zone 72,
Press and release the PTT button to exit the
during scan. Y = Contains Zone 73, Zone 74 and
Silent Emergency Alarm mode and enter
Zone 75.
regular dispatch or Emergency Call mode.
k The vote scan feature is enabled.
To exit emergency at any time, press and hold
On = Secure operation. b Bluetooth is ready.
the Emergency button.
m Off = Clear operation.
Blinking = Receiving an encrypted a Bluetooth is connected to the device.
voice call.
On steady = View mode
Blinking = Program mode

English

S-ar putea să vă placă și