Documente Academic
Documente Profesional
Documente Cultură
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
This document was created very carefully. If there are any
technical changes, they will promptly updated in the docu-
ments on our website www.amo-gmbh.com
ELECTROMATE
2 Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Table of contents
General informations
General information............................................................................................... 4
Standard measuring flanges for outside scanning................................................. 6
Customer specific measuring flanges for outside scanning................................... 8
Measuring rings for outside scanning.................................................................... 10
Measuring rings for inside scanning...................................................................... 12
Scanning head for absolute angle measuring systems......................................... 14
Scales for non-guided measuring systems, mounted with adhesive tape............. 18
Scales for non-guided measuring systems with steel carrier................................. 19
Scanning heads for non-guided measuring systems............................................. 22
Measuring rail for guided systems......................................................................... 24
Scanning head for guided systems........................................................................ 27
Maximum speeds................................................................................................... 31
Cable..................................................................................................................... 32
Plug and connection assignments......................................................................... 33
ELECTROMATE
3
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Absolute Messsysteme Allgemeine Informationen
Absolute measuring systems General informations
General
Absolut Angle Measuring System
For both the linear and rotary systems, the absolute position value
is acquired in real time. Several types of serial interfaces are
available, including SSI, BiSS/C, and CNC control protocols. As
an option, the system electronics can also deliver 1 Vpp SINE /
COSINE signals at 40m pitch.
The basic pitch period of the incremental graduation is 1000m.
The new ABSYS absolute encoders include all of the unique Messflansch
Measuring flange
inductive encoder features that our incremental encoders have for
harsh environments, such as very wide operating temperature en-
velope, ability to operate in high shock, vibration, and electroma-
gnetic environments, but yet offer high accuracy, high resolution,
and high speed. Additional data for our encoders can be found in
the AMOSIN brochures (see www.amo-gmbh.com).
Linear measuring lengths up to 32 meters, and standard ring scale size from 80 mm up to 652 mm diameter are available. Measuring rings with
other diameters up to 10m on request.
Abtastkopf
Measuring head
Absolutmastab
Absolut scale
Inkrementale Teilung
Incremental grating
Absolut codierte Teilung
Absolut coded grating
ELECTROMATE
4 Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Absolute angle measuring systems
Resolution up to 25 bit
Available interfaces:
SSI, BiSS/C, Fanuc
Diameters up to 10 m
Protection class IP 67
ELECTROMATE
5
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Absolute Winkelmesssysteme Messflansche und Messringe - Auenabtastung
Absolute angle measuring systems Measuring flanges and rings - outside scanning
Technical data
WMFA-1010
Standard sizes N
Mechanical execution:
Stainless steel measuring flange in 2 versions:
massive: WMFA-1010.x-xxxx-0
thin: WMFA-1010.x-xxxx-1
Outer diameter A [mm]:
81,95 115,12 163,54 229,78 287,08 326,55
WMFA-1010. - -
Linearity error
Inner diameter I (see drawing)
0 ... 10 m arc length
1 ... 5 m arc length 0 .......... small
2 ... 3 m arc length Grating pitches / revolution (N) 1 .......... large
ELECTROMATE
6 Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Messflansche und Messringe - Auenabtastung Absolute Winkelmesssysteme
Measuring flanges and rings - outside scanning Absolute angle measuring systems
Dimensions WMFA-1010
0,005 A
0,005
DETAIL X
M 2:1
0,005
15 0,05
5,2
A
B
0,5x45
0,5x45
+0,1
0,1 0
A
-0,01
6,5 6,5
0
+0,5
I
2 0
M
6
0,1
ELECTROMATE
7
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Absolute Winkelmesssysteme Messflansche und Messringe - Auenabtastung
Absolute angle measuring systems Measuring flanges and rings - outside scanning
Technical data
WMFA-1010 / WMBA-1010
Standard sizes N
Mechanical execution:
Customer specific, recommended material 1.4104 (Aisi 430F) or 1.7225 (Aisi 4140)
ELECTROMATE
8 Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Messflansche und Messringe - Auenabtastung Absolute Winkelmesssysteme
Measuring flanges and rings - outside scanning Absolute angle measuring systems
WMFA-1010 / WMBA-1010
Freiraum fr Abtastkopf
Measuring head width
0,5
S = F + 0,650,05
S Lnge>7mm
900 286,38 0,02
0,005* A
A
N: Integer number of grating pitches per revolution
WMFA-1010. - -S
WMBA-1010. - -S
Linearity error
Customer specific design
0 ... 10 m arc length
1 ... 5 m arc length xx ......... number defined by AMO
2 ... 3 m arc length Grating pitches / revolution (N)
ELECTROMATE
9
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Absolute Winkelmesssysteme Messflansche und Messringe - Auenabtastung
Absolute angle measuring systems Measuring flanges and rings - outside scanning
Auendurchmesser
Outer diameter
A
Innendurchmesser
Inner diameter
F
0,65
14
WMRA-1010
Technical data
WMRA-1010
Standard sizes N
Mechanical execution:
Stainless steel measuring ring
Flange material:
No special material required
Absolute resolution / rev [increments] 1m: 360 x 720 x 900 x 1440 x 1800 x
218 219 220 221
210 210 210 210 210
Absolute resolution / rev [increments] 0,25m: 360 x 720 x 900 x 1440 x 1800 x
220 221 222 223
212 212 212 212 212
ELECTROMATE
10 Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Messflansche und Messringe - Auenabtastung Absolute Winkelmesssysteme
Measuring flanges and rings - outside scanning Absolute angle measuring systems
WMRA-1010
Grating pitch [arc length]: 1000 m
0,01 A
N F [mm]
>15
0,5-1 l 0,8 256 80,65 0,01
Gratfrei
Burr free
3,2 360 113,82 0,01
15
Freiraum fr Abtastkopf
Measuring head width
0,5
S = F + 1,150,05
720 228,48 0,02
S Lnge>7mm
900 285,78 0,02
0,005* A
*) Recommended eccentricity: Greater eccentricities up to ~0,05mm do not affect the function of the device, but cause a proportional loss in positioning accuracy.
WMRA-1010. -
Linearity error
ELECTROMATE
11
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Absolute Winkelmesssysteme Messringe - Innenabtastung
Absolute angle measuring systems Measuring rings - inside scanning
Auendurchmesser
Outer diameter
B
Innendurchmesser
Inner diameter
F
0,60
14
WMRA-1110
Technical data
WMRA-1110
Standard sizes N
Mechanical execution:
Stainless steel measuring ring
Flange material:
No special material required
ELECTROMATE
12 Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Messringe - Innenabtastung Absolute Winkelmesssysteme
Measuring rings - inside scanning Absolute angle measuring systems
WMRA-1110
+0,1 Grating pitch [arc length]: 1000 m
14,01 0
N B [mm]
Gratfrei 0,02 A
Burr free 1024 326,62 0,02
0,005* A
1440 459,01 0,03
1800 573,56 0,06
0,5
0,02 A
2048 652,47 0,07
3,2
Freiraum fr Abtastkopf
Measuring head width
keep free for >28mm
S = B - 1,150,05
B
S Lnge >28mm
0,8
0,8
*) Recommended eccentricity: Greater eccentricities up to ~0,05mm do not affect the function of the device, but cause a proportional loss in positioning accuracy.
WMRA-1110. -
Linearity error
ELECTROMATE
13
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Absolute Winkelmesssysteme Abtastkopf
Absolute angle measuring systems Scanning head
Technical data
WMKA-2110x WMKA-2010x
inside scanning outside scanning
Operating temperature:
-10C 85C
Storage temperature:
-20C 85C
Protection class:
IP67
Vibration:
< 200 m/s fr (for) 55 2000 Hz
Shock:
< 2000 m/s fr (for) 6 ms
Power supply:
3,5V to 5,5V
Power consumption:
max. 250 mA @ 5,0V (360mA @ 3,5V; 230mA @ 5,5V)
Max. input frequency: 39 kHz fr alle absoluten Schnittstellen (2,4kHz bei 0,25m) /for all absolute interfaces
60 kHz fr 1Vss Ausgang / for 1Vpp output
System resolution: Absolutes interface: bis zu 25 bit pro Umdrehung
Absolute interface: up to 25 bit per revolution
Analogausgang 1Vss: bis zu 31,25 m
Analog output 1Vpp: down to 31,25 m
ELECTROMATE
14 Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Abtastkopf Absolute Winkelmesssysteme
Scanning head Absolute angle measuring systems
Output signal
Sine 1Vpp
Signal periods
Output frequency fa (input frequency for
Perioden Power
Type Max. input subsequent electronics) is limited to 300
[Bogenlnge] consumption
Teilungsfaktor frequency(1) kHz for 1Vpp-systems.
WMKA Periods
Dividing factor f[khz]
[arc length] [mA] at 5V
[m]
9 (10 bit)
2x100.x00(1) 1 1000 max. 250
2,4 (12 bit)
2x100.x10 1 1000
2x100.x11 8 125
2x100.x12 10 100
9 (10 bit)
2x100.x13 25 40 max. 250
2,4 (12 bit)
2x100.x14 32 31,25
2x100.x15 4 250
2x100.x16 16 62,5
2x100.x30 1 1000 60 (10 bit) max. 250 (1)
Encoder for safety related applications
50
Messkopf 26
26 Measuring head 2x
4,5 = 25 = ~6
5,2
4
0,1 A
22,1
0,1 A
5 0,5
6 0,5
Luftspalt 0,150,1
mit Folie einstellen
Air gap0,150,1
A/2+k
N A/2 + k
6x
Zhlrichtung +
Count direction +
Pitches / rev [mm]
256 56,74
A
A
A
I 360 73,29
A
14 2048 343,84
14
15
+ Zhlrichtung
Count direction
N k [mm]
14 6 0,5 Pitches / rev
18,1+k
WMRA-1100
2048 0,96
0,15 0,1
26 4,5 = 25 =
2x
5,2
50
Sold & Serviced By:
ELECTROMATE
15
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Absolute Winkelmesssysteme Abtastkopf
Absolute angle measuring systems Scanning head
Connector type
0 ...... none
2 ...... 20 pin FANUC connector
Design Cable length in meter 5 ...... 15 pin Sub-D connector
7 ...... 17 pin CONNEI coupling (male)
0 ... Outside scanning preferred cable length in steps of 0,5m
8 ...... 8 pin M12 connector (just for DriveCLiQ)
1 ... Inside scanning
Ordering code: WMKA-2010x/2110x for interfaces other than SSI and DRIVE CLiQ
0 ...... none
Design Cable length in meter 2 ...... 20 pin FANUC connector
5 ...... 15 pin Sub-D connector
0 ...Outside scanning preferred cable length in steps of 0,5m 7 ...... 17 pin CONNEI coupling (male)
1 ...Inside scanning
(1)
in preparation
ELECTROMATE
16 Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Absolute length measuring systems
Resolution up to 25 bit
Available interfaces:
SSI, BiSS/C, Fanuc
Protection class IP 67
ELECTROMATE
17
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Offene absolute Lngenmesssysteme Mabnder
Open absolute length measuring systems Scales
LMBA-1110/2110
Scale for non-guided measuring systems, mounted with adhesive tape
Configuration
Abdeckband
Cover tape
Doppelseitiges Klebeband
Adhesive tape
Maband
Measuring tape
Trgerband
Carrier tape
Technical data
LMBA-1110 LMBA-2110
Incremental grating pitch:
1000 m
Coefficient of expansion:
~ 11 ppm/K
Mechanical execution:
Stainless steel measuring tape with adhesive layer for mounting
Ordering code
LMBA- 110. -
ELECTROMATE
18 Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Mabnder Offene absolute Lngenmesssysteme
Scales Open absolute length measuring systems
LMBA-1410/2410
Scale on stainless steel carrier, for non-guided measuring systems
Measuring lengths up to 32 m
Configuration
"Schnapp" Abdeckung
"Snap" cover
Maband
Scale
Mabandklemme
Scale fixing bracket
Mabandtrger Trgerband
Scale carrier Carrier tape
Technical data
LMBA-1410 LMBA-2410
Incremental grating pitch:
1000 m
Coefficient of expansion:
~ 11 ppm/K
Overall length:
9200 mm 9200 mm bis (up to) 32000 mm
Mechanical execution: Stainless steel measuring tape mounted on stainless steel carrier
Single carrier up to 3 m, lengths up to 32 m with multiple carriers
ELECTROMATE
19
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Offene absolute Lngenmesssysteme Mabnder
Open absolute length measuring systems Scales
LMBA - 1410/2410
Multiple section carrier, type M2
22
A-A (2 : 1) 14
Mabandtrger Maband Trgerprofil Stostelle 7,5
Scale carrier Scale Carrier joint point A
6,9
5,1
3
0 0 0 0
0,5x45
50 - 0,5 100 50 - 0,5 50 - 0,5 50 - 0,5
A
9x100 100 9x100 100
4,5
Flachkopfschraube
Flat head screw 18
M4x6 DIN 7984
+ Zhlrichtung
Count direction
Mabandklemme "Schnapp" Abdeckung Abtastkopf
Scale fixing bracket "Snap" cover Scanning head
10 ML KL 10
GL
1000 1000 RL
ELECTROMATE
20 Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Mabnder Offene absolute Lngenmesssysteme
Scales Open absolute length measuring systems
LMBA - 1410
Single section carrier, type E2
A-A (2 : 1)
22
14
Maband Mabandtrger 7,5
Scale Scale carrier A
6,9
05x45
0
5,1
0
50 - 0,5 100 50 - 0,5
A mx100 4,5
Flachkopfschraube
Flat head screw
4x6 DIN 7984 18 0,05
Abtastkopf + Zhlrichtung
Count direction
Mabandklemme "Schnapp"- Abdeckung Scanning head
Scale fixing bracket "Snap"- cover
10 ML KL 10
GL
Ordering code
LMBA- 410. - -
Overall length in mm
Carrier type
Linearity error
Overall length E2 ... Single section carrier
1 ... 10 m/m M2 ... Multiple section carrier
1 ... 9200 mm 2 ... 5 m/m
2 ... > 9200 mm 3 ... 3 m/m
ELECTROMATE
21
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Offene absolute Lngenmesssysteme Abtastkopf
Open absolute length measuring systems Scanning head
LMKA-1110x/2110x
Scanning head for non-guided absolute length measuring systems
Technical data
LMKA-1110x LMKA-2110x
Operating temperature:
-10C 85C
Storage temperature:
-20C 85C
Protection class:
IP67
Vibration:
< 200 m/s fr (for) 55 2000 Hz
Shock:
< 2000 m/s fr (for) 6 ms
Power supply:
3,5V to 5,5V
Power consumption:
max. 250 mA @ 5,0V (360mA @ 3,5V; 230mA @ 5,5V)
Max. speed:
10 m/s for 1m 2,5 m/s for 0,25m
ELECTROMATE
22 Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Abtastkopf Offene absolute Lngenmesssysteme
Scanning head Open absolute length measuring systems
Output signal
Sine 1Vpp
Signal periods Maximum Power
Type speed consumption
Periods
Dividing factor [arc length]
LMKA [m]
[m/s] [mA] at 5V
x1100.100 (1)
1 1000 10 max. 250
x1100.110 1 1000
10 max. 250
x1100.113 25 40
x1100.200(1) 1 1000 2,5 max. 250
x1100.210 1 1000
2,5 max. 250
x1100.213 25 40
(1)
Encoder for safety related applications
0,1
22,1
23,1
19,1
0,8
2x 4,5
0,1
0,15 0,1
Absolutspurseite Zhlrichtung
Absolut track side + Count direction
Maband
6 0,5
Scale
A
14
0,1/1000
0,1
GL
0,1
4
22,1
27,4
18,25
5,1
4 0,5
Luftspalt mit Folie eingestellt
Air gap set with spacer film
nx100
Mastab LMBA-400
Scale LMBA-400
+ Zhlrichtung
Count direction
Absolutspurseite
Absolut track side
=
A
A
18
=
0,1/1000
0,1 Sold & Serviced By:
ELECTROMATE
23
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Gefhrte absolute Lngenmesssysteme Mabnder
Guided absolute length measuring systems Scales
LMFA-1310/2310
Measuring rail for guided AMOSIN measuring systems
Configuration
Mabandklemme
(an beiden Enden)
Scale fixing bracket
(on both ends)
"Schnapp" Abdeckung
"Snap" Cover
Maband mit
Trgerband
Measuring scale
Messschiene with carrier tape
Measuring rail
Montage Bohrungen
fr die Messschiene
Mounting hole for
the measuring rail
Technical data
LMFA-1310 LMFA-2310
Grating pitch:
1000 m
Coefficient of expansion:
~ 11 ppm/K
Overall length:
9200 mm > 9200mm (bis zu / up to 32 000 mm)
Mechanical execution:
Standard guide rail with integrated measuring scale
Sold & Serviced By:
ELECTROMATE
24 Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Mabnder Gefhrte absolute Lngenmesssysteme
Scales Guided absolute length measuring systems
LMFA - 1310
Single section measuring rail
9,4
20,55
20
13,2 0,5
0,4 Achtung!
Am Schienenende mit dem
Spannelement mu
ausreichend Platz fr die
Montage bzw. Demontage
des Messwagens frei bleiben.
Warning!
Equipment design
60 considers here free
60
space for slider
+0 +0 mounting.
30 -1,0 mx60 30 -1,0
ELECTROMATE
25
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Gefhrte absolute Lngenmesssysteme Mabnder
Guided absolute length measuring systems Scales
LMFA - 1310/2310
Multiple section measuring rail
9,4
20,55
6
13,2 0,5
20
0,4
Achtung!
Am Schienenende mit dem
Spannelement mu
ausreichend Platz fr die
Montage bzw. Demontage
des Messwagens frei bleiben.
Warning!
+0 +0 Equipment design
30 -1,0 mx60 30 30 64x60=3840 30 -1,0 considers here free
space for slider
mounting.
RL-Schinenreststck / Rest length rail nx3900
Ordering code
LMFA- 310. -
Measuring length in mm
Linearity error
Overall length Coating
1 ... 10 m/m
1 ... 9200 mm 0 ... ohne / without 2 ... 5 m/m
2 ... > 9200 mm 1 ... mit Cr / with Cr 3 ... 3 m/m
ELECTROMATE
26 Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Abtastkopf Gefhrte absolute Lngenmesssysteme
Scanning head Guided absolute length measuring systems
LMKA-1310x/2310x
Scanning head for guided absolute length measuring systems
Technical data
LMKA-1310x LMKA-2310x
Operating temperature:
0C 80C
Storage temperature:
-20C 85C
Protection class:
IP67
Vibration:
< 200 m/s fr (for) 55 2000 Hz
Shock:
< 2000 m/s fr (for) 6 ms
Power supply:
3,5V to 5,5V
Power consumption:
max. 250 mA @ 5,0V (360mA @ 3,5V; 230mA @ 5,5V)
Max. speed:
5 m/s fr 1m; 2,5 m/s fr 0,25m, limited by the mechanics
1000 m or 40 m
Analog output 1Vpp:
ELECTROMATE
27
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Gefhrte absolute Lngenmesssysteme Abtastkopf
Guided absolute length measuring systems Scanning head
Output signal
Sine 1Vpp
Signal periods Maximum Power
Type
Periods speed consumption
LMKA Dividing factor [arc length]
[m] [m/s] [mA] at 5V
x3100.100 (1)
1 1000 5 max. 250
x3100.110 1 1000
5 max. 250
x3100.113 25 40
x3100.200(1) 1 1000 2,5 max. 250
x3100.210 1 1000
2,5 max. 250
x3100.213 25 40
(1)
Encoder for safety related applications
20 24
Federelement
4,
Mounting spring
4
2x<
2xM M4/6
5,2
4/6 tief
dee
p
2
49,75
54,75
40,75
34,75
27,7
2
= 20 =
75
Absolut Spur
Absolut track Mabandklemme
Scale fixing bracket
14
44
25,8
ELECTROMATE
28 Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Abtastkopf Offene absolute Lngenmesssysteme
Scanning head Open absolute length measuring systems
1 .......1m 0(1) ... 9 kHz (1m) / 2,4 kHz (0,25m) 0 ... 1 (1000 m)
2 .......0,25m 1 ... 9 kHz (1m) / 2,4 kHz (0,25m) 3 ... 25 (40 m)
4 .......1m (2) (1)
Geber fr sicherheitsgerichtete Anwendungen
5........0,25 m (2) Encoder for safety related applications
Nur mit analogen Teilungsfaktor 1 mglich
(1) only with analog dividing factor 1 possible
SSI Beschreibung auf Homepage www.amo-gmbh.com
SSI Description on our website www.amo-gmbh.com
(2)
fr neue Projekte, siehe SSI Beschreibung
for new Projects, see SSI Description
Bestellcode: LMKA-1310x/2310x/1110x/2110x
Ordering code: LMKA-1310x/2310x/1110x/2110x
LMKA- 110 . NN - , -
LMKA- 310 . NN - , - gefhrt / guided
Steckertyp
Connector type
ELECTROMATE
29
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Gefhrte absolute Lngenmesssysteme Abtastkopf
Guided absolute length measuring systems Scanning head
ELECTROMATE
30 Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Allgemeine Informationen Maximale Drehzahlen
General information Maximum speed
Maximum speed
a) Max. speed
The maximum speed nmax of a measuring system can be calculated considering the max. input frequency f of the scanning head and the num-
ber of pitches per revolution N of the measuring flange as follows:
b) Output frequency
The max. output signal frequency fa of the scanning head depends on the max. speed n used in the application, the number of grating pitches
per revolution N and the dividing factor D of a scanning head.
Its important to not exceed the max. input frequency of the subsequent electronics.
Maximum rotary speeds for standard measuring flanges respectively measuring rings are shown below.
WMKA-2x100.100 9 2100 1500 1050 750 600 520 370 300 260
WMKA-2x10x.1xx 9 2100 1500 1050 750 600 520 370 300 260
WMKA-2x100.130 60 14000 10000 7000 5000 4000 3500 2500 2000 1750
ELECTROMATE
31
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Kabel Allgemeine Informationen
Cable General information
Cable
Technical data
Messsystem Verlngerungskabel
Measuring system Extension cable
VK - 4 - - -
10A ... without connector 00A ... without connector
15A ... 15 pin SUB-D 02A 20 pin FANUC connector
18A ... 17 pin CONNEI connector CCW 05A ... 15 pin SUB-D
19A ... Special connector or special pin assignments Cable length 07A ... 17 pin CONNEI coupling CW
in meter 09A ... Special connector or special pin assignments
ELECTROMATE
32 Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Allgemeine Informationen Steckerbelegungen
General information Plug and pin assignments
M23x1
26
Power supply Incremental signals Absolute interface
PIN 7 1 10 4 15 16 12 13 14 17 8 9
Signal +5V 5V-Sensor 0V 0V-Sensor A+ A- B+ B- Data+ Data- Clock+ Clock-
Color red red-white blue blue-white green yellow brown white violet black pink grey
Shield on housing
PIN 4 12 2 10 1 9 3 11 5 13 8 15
Signal +5V 5V-Sensor 0V 0V-Sensor A+ A- B+ B- Data+ Data- Clock+ Clock-
Color red red-white blue blue-white green yellow brown white violet black pink grey
Shield on housing
1 2 3 4 5 6 7 8 9 10
PIN 18 20 14 12 1 2 5 6 16
Signal +5V +5V 0V 0V Data+ Data- Clock+ Clock- shield
Color red red-white blue blue-white violet black pink grey
Shield on housing
ELECTROMATE
33
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Notes
ELECTROMATE
34 Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Additional product brochures
Product overview
AMO GmbH
Product overview:
Incremental
LENGTH- AND ANGLE MEASURING
SYSTEMS based on the AMOSIN
Inductive Measuring Principle
Inductive encoders comparable
to optical encoders in both,
accuracy and resolution
No magnetic components, no
magnetic fields, hysteresis or
demagnetisation risk
Spindle encoder
AMO GmbH
Spindelgeber
nach dem AMOSIN Messprinzip
Spindle encoder based on the AMOSIN
Inductive Measuring Principle
Kompakte Bauform
Compact desig
Hohe EMV-Festigkeit
High EMC immunity
Keine magnetischen
Komponenten oder Felder,
Hysterese oder Entmagneti-
sierungsgefahr
No magnetic components
No magnetic field hystere-
sis or demagnetisation risk
Schutzklasse IP67
wasserdichte Impulsgeber
Protection class IP67
Fluid submersible encoders
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
AMO GmbH
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com