Documente Academic
Documente Profesional
Documente Cultură
ELECTROMATE
Toll Free Phone (877) SERVO98
TM Series Iron Core Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Tecnotion | www.tecnotion.com | sales@tecnotion.com
Peak Force @ 6C/s increase magnet @ 25C Fp N 105 210 420 630
Continuous Force* coils @ 100C Fc N 60 120 240 360
Maximum Speed** @ 600 V vmax m/s 12 12 12 4.5 10.0
Motor Force Constant mount. sfc. @ 20C K N/Arms 39 39 39 79 39
2
Motor Constant coils @ 25C S N /W 95 190 380 570
Ultimate Current magnet @ 25C Iu Arms 4.1 8.2 16.4 12.3 25.1
Peak Current magnet @ 25C Ip Arms 3.1 6.2 12.4 9.2 18.9
Maximum Continuous Current* coils @ 100C Ic Arms 1.5 3 6 4.5 9.3
Electrical
Back EMF Phase-Phasepeak Bemf V/m/s 32 32 32 65 32 TM3 on 144mm magnet plate shown
Resistance per Phase* coils @ 25C ex. cable Rph 5.4 2.7 1.35 3.6 0.85
Induction per Phase I < 0.6 Ip Lph mH 35 17 9 23 5.5
Electrical Time Constant* coils @ 25C e ms 6.5 6.5 6.5 6.5
Maximum Continuous Power Loss all coils Pc W 49 99 197 296 Approvals
Thermal
Thermal Resistance coils to mount. sfc. Rth C/W 1.5 0.75 0.38 0.25 See page 28 for Analog hall
Thermal Time Constant* up to 63% max. coiltemp. th s 75 75 75 75
Temperature Cut-off / Sensor PTC 1k / KTY 83-122 FLEX Cable
Coil Unit Weight ex. cables W kg 0.6 0.9 1.6 2.3
The TM series comes standard with a 3m long
Coil Unit Length ex. cables L mm 93 143 241 336 FLEX power cable.
Motor Attraction Force rms @ 0 A Fa N 300 500 900 1300
Magnet Pitch NN mm 24 24 24 24
Mechanical
* These values are only applicable when the mounting surface is at 20C and the motor is driven at maximum continuous current. If these values differ in your application, please check our simulation tool.
** Actual values depend on bus voltage. Please check the F/v diagram in our simulation tool.
*** Depending on Bending Radius, Velocity and Acceleration.
Ver. 1.07
2015 Tecnotion BV - All rights reserved - The contents of this document are subject to change without prior notice.
TM TL TB TBW 9
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
Mounting instructions and flatness or parallelism requirements
www.electromate.com
can be found in the Iron Core installation manual. CAD files, 3D MAGNET PLATES COIL UNITS
models and the manual can be downloaded from our website.
28 23 sales@electromate.com
15.6
12.6 6.5
6.75
M 3 (2x, 3 deep) Optional: Digital Hall Module
15.25
Mounting Heigth
+0.05
O2 0 (2x, 2.5 deep)
+
40 0.1
-2
+1
14
O 4.3 Thermal sensor cable
30
O 8.3 Power cable Cable lenght 1.2 m
13
50 5.1
Coil unit
15 74
44 Slotted Hole O5x0.2 (4 deep)
8.2
Hole O5 (4 deep) 15 For Dowelpin DIN7 O5h8
4
For Dowelpin DIN7 O5h8
10
Magnet plate
TM 3
Slotted Hole O5x0.5 ( deep)
For Dowelpin DIN7 O5h8 Hole O5 ( deep)
23
10
(Optional use) 72 15.4 For Dowelpin DIN7 O5h8 ep)
12 (Optional use) (5 de 93
M4
TM 96mm
50 60
92
40
50
82
16
)
he ad 48 20.4
TM 6
for ( Low 96
O 6 DIN7984
M5
143
144
120 120 15.4
2x TM 144mm
12 51 160
64 64 64
16
TM 12
5x48 (=240) 20.4
288
241
68 223
360 15.4 85 85 85
12 16
TM 384mm
TM 18
2015 Tecnotion BV - All rights reserved - The contents of this document are subject to change without prior notice.
TM TL TB TBW