Documente Academic
Documente Profesional
Documente Cultură
www.vishay.com
Vishay Beyschlag
Professional Thin Film Leaded Resistors
FEATURES
CECC version (IECQ-CECC approved
according to EN 140101-806)
Excellent overall stability: class 0.25
Wide ohmic range: 0.22 to 22 M
AEC-Q200 qualified available (1)
Radial version available for MBB/SMA 0207
Alternative termination wires available for e.g. welding
(MBA/SMA0204 only)
Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Note
(1) AEC-Q200 qualified parts are available per tables Temperature
Coefficient and Resistance Range.
DESCRIPTION
MBA/SMA 0204, MBB/SMA 0207, and MBE/SMA 0414
APPLICATIONS
professional leaded thin film resistors are the general
purpose resistor for all fields of professional electronics Industrial
where reliability and stability is of major concern. Typical Telecommunication
applications include industrial, telecommunication, Medical equipment
automotive, and medical equipment.
Automotive
TECHNICAL SPECIFICATIONS
DESCRIPTION MBA/SMA 0204 MBB/SMA 0207 MBE/SMA 0414
CECC size A B D
Insulation voltage:
Continuous 75 V 75 V 75 V
Notes
MB_ series has been merged with the related SMA series to form one series MB_/SMA__.
(2) Please refer to APPLICATION INFORMATION below.
MBB/SMA 0207 1 to 1 M 1 to 1 M
0.22 to 0.91
5% E24
11 M to 22 M
1% 10 to 1 M E24; E96
25 ppm/K
0.5 % 10 to 1 M E24; E192
Notes
Resistance ranges printed in bold are preferred TCR / tolerance combinations with optimized availability.
(1) Resistance value to be selected from E24 series for 5 %, 2 %, from E24/E96 series for 1 % tolerance and from E24/E192 for 0.5 %
tolerance.
(2) AEC-Q200 qualification applies to products with TCR = 50 ppm/K and tolerance = 1 % in the ranges of 10 to 301 k for MBA/SMA
0204, 10 to 7.5 M for MBB/SMA 0207, and 10 to 22 M for MBE/SMA 0414.
Notes
The products can be ordered using either the PRODUCT DESCRIPTION or the PART NUMBER.
Standard products are not CECC approved.
Radial version (RB,UB) cannot be qualified according to CECC so these can only be ordered as standard products.
0.22 to 0.91
5% E24
11 M to 22 M
50 ppm/K
1% 1 to 10 M E24; E96
1% 10 to 1 M E24; E96
25 ppm/K
0.5 % 10 to 1 M E24; E192
Notes
Resistance ranges printed in bold are preferred TCR / tolerance combinations with optimized availability.
(1) Resistance value to be selected from E24 series for 5 %, from E24/E96 series for 1 % tolerance and from E24/E192 for 0.5 % tolerance.
(2) AEC-Q200 qualification applies to products with TCR = 50 ppm/K and tolerance = 1 % in the ranges of 10 to 301 k for MBA/SMA
0204, 10 to 7.5 M for MBB/SMA 0207, and 10 to 22 M for MBE/SMA 0414.
Notes
Approval is according to EN 140101-806, version A.
Radial version (RB, UB) cannot be qualified according to CECC so these can only be ordered as standard products.
PACKAGING
TYPE / SIZE CODE QUANTITY PACKAGING STYLE WIDTH PITCH DIMENSIONS
C1 1000 Taped acc. to IEC 60286-1 184 mm x 75 mm x 42 mm
fan-folded in a box 53 mm 5 mm
CT 5000 330 mm x 75 mm x 55 mm
MBA/SMA 0204
Taped acc. to IEC 60286-1
RP 5000 on a reel 53 mm 5 mm 242 mm x 76 mm x 86 mm
184 mm x 74 mm x 42 mm
C1 1000
Taped acc. to IEC 60286-1 260 mm x 78 mm x 31 mm
fan-folded in a box 53 mm 5 mm
260 mm x 75 mm x 114 mm
MBB/SMA 0207 (1) CT 5000
324 mm x 77 mm x 82 mm
Taped acc.to IEC 60286-1 315 mm x 76 mm x 86 mm
RP 5000 on a reel 53 mm 5 mm
298 mm x 75 mm x 86 mm
N4 4000 Taped acc. to IEC 60286-2 330 mm x 262 mm x 45 mm
MBB/SMA 0207 fan-folded in a box
- 12.7 mm
UB = 2.5 mm pitch Taped acc. to IEC 60286-2
R4 4000 on a reel 330 mm x 253 mm x 48 mm
Taped acc. to IEC 60286-2
N4 4000 330 mm x 262 mm x 45 mm
MBB/SMA 0207 fan-folded in a box
- 12.7 mm
RB = 5 mm pitch Taped acc. to IEC 60286-2
R4 4000 330 mm x 253 mm x 48 mm
on a reel
Taped acc. to IEC 60286-1
C1 1000 fan-folded in a box 374 mm x 84 mm x 47 mm
MBE/SMA 0414 63 mm 5 mm
Taped acc. to IEC 60286-1
R2 2500 315 mm x 80 mm x 90 mm
on a reel
Note
(1)
Manufacturing at different production locations may involve use of different size box.
100
Power in %
Standard Mode
80 Power Mode
60
40
20
0
-55 0 50 70 100 125 155 180
Ambient Temperature in C
Derating
Temperature Rise Tr
80
K
60
40
MBE/SMA 0414
MBB/SMA 0207
20 MBA/SMA 0204
0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 W 1
Load P
Rise of surface temperature
Temperature Rise
10
0.1
10 s 100 s 1 ms 10 ms 100 ms 1s 10 s
Pulse Duration ti
Maximum pulse load, single pulse; for permissible resistance change equivalent to 8000 h operation.
Single Pulse
Continuous Pulse Load Pmax.
MBE/SMA 0414
100 MBB/SMA 0207
MBA/SMA 0204
W
10
0.1
10 s 100 s 1 ms 10 ms 100 ms 1s 10 s
Pulse Duration ti
Maximum pulse load, continuous pulses; for permissible resistance change equivalent to 8000 h operation.
Continuous Pulse
Pulse Voltage U max.
MBE/SMA 0414
MBB/SMA 0207
MBA/SMA 0204
1 kV
100 V
10 s 100 s 1 ms 10 ms 100 ms 1s 10 s
Pulse Duration ti
Maximum pulse voltage, single and continuous pulses; for permissible resistance change equivalent to 8000 h operation.
Pulse Voltage
Test Voltage
10 kV
1 kV
10 V
10 100 1 k 10 k 100 k 1 M 10 M
Resistance Value R
Pulse load rating in accordance with IEC 60115-1, 4.27; 1.2 s/50 s; 5 pulses at 12 s intervals;
for permissible resistance change (0.5 % R + 0.05 )
1.2/50 Pulse
Test Voltage
10 kV
1 kV
10 V
10 100 1 k 10 k 100 k 1 M 10 M
Resistance Value R
Pulse load rating in accordance with IEC 60115-1, 4.27; 10 s/700 s; 10 pulses at 1 minute intervals;
for permissible resistance change (0.5 % R + 0.05 )
10/700 Pulse
Current Noise A1
V/V
0.1
MBE/SMA 0414
MBB/SMA 0207
MBA/SMA 0204
0.01
100 1K 10K 100K 1M 10M
Resistance Value R
Current noise - A1 in accordance with IEC 60195
d
L I
M
P
DIMENSIONS in millimeters
Pitch of components P 12.7 1.0
Insulated Lead spacing F 2.5 + 0.6 / - 0.1
C
Width of carrier tape W 18.0 + 1.0 / - 0.5
3 max. Body to hole center H 18.0 2.0
H1 Height for cutting (max.) L 11
H F Height for bending C 2.5 + 0 / - 0.5
L Height for insertion (max.) H1 32
W
Direction of unreeling
P
DIMENSIONS in millimeters
Insulated Pitch of components P 12.7 1.0
C
Lead spacing F 5.0 + 0.6 / - 0.1
Width of carrier tape W 18.0 + 1.0 / - 0.5
H1 3 max.
H Body to hole center H 18.0 2.0
Lead crimp to hole center H0 16.0 0.5
L F H0
Height for cutting (max.) L 11
W
Height for bending C 2.5 + 0 / - 0.5
Height for insertion (max.) H1 32
Direction of unreeling
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
Vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishays knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customers responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customers
technical experts. Product specifications do not expand or otherwise modify Vishays terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.