Documente Academic
Documente Profesional
Documente Cultură
ONTO BITUMEN
1. Position wheel stop 2. Drill pilot holes 3. Move wheel stop aside and
according to AS2890.1:2004. approximately 50mm deep drill out the pilot holes with
using a 10mm masonry bit. a 12mm masonry bit 90mm
Car Park and Traffic Control
deep.
4. Remove dust from holes, 5. Wind in fixings securely
reposition wheel stop and using socket wrench or
tap trubolt fasteners in. impact driver.
* Epoxy can also be used for fixing method along with fasteners
820mm 1100mm
Front into a high kerb or wall Rear into a high kerb or wall
620mm 900mm