Documente Academic
Documente Profesional
Documente Cultură
JUNG
ECCHIPAMENT DE TRANSPORT SI RIDICAT
Lifting and transport equipment
2014/15
www.role-cricuri.ro
Made in
Germany
Disponabilitate Availability
Almost all standard product lines are in stock 365 days a year.
Aproape toate produsele sunt disponibile pe stoc 365 zile/an.
2
Continut List of content
solutii perfecte la problemele dvs. de transport we always offer the perfect solution for your transport problem!
Cricuri Hidraulice Seria JH-G plus - pana la 30 Tone 4-7 Hydraulic jacks up to 30 metric tons Series JH-G plus
Cricuri Hidraulice Seria JHS - pana la 20 Tone 8-9 Hydraulic jack sets up to 20 metric tons Series JHS
Cricuri Hidraulice Seria JH-P - pana la 50 Tone 12 Hydraulic jacks up to 50 metric tons Series JH-P
Pompe hidraulice JP si hidropneumatice JPL 14 Hydraulic handpump JP and air hydraulic pump JPL
Role transportoare rotative Seria JKB - pana la 15 Tone 17-19 Revolving transport trolleys for loads up to 15 metric tons Series JKB
Role transportoare Seria K - pana la 24 Tone 20-21 Transport trolleys for loads up to 24 metric tons Series K
Role transportoare Seria K Profesional pana la 28 Tone 22-23 Transport trolleys for loads up to 28 metric tons Series K Profesional
Role transportoare JTLB Seria K - pana la 14 Tone 24 Tandem transport trolleys for loads up to 14 metric tons Series K
Role transportoare Seria S - pana la 48 Tone 25 Transport trolleys for loads up to 48 metric tons Series S
U
Role transportoare multiscop JLF Seria M pana la 15 Tone
NO 26-27 Multi-Purpose trolley for loads up to 15 metric tons - Series M
NEW
Role transportoare autopropulsate JLA 15 / 30 G - pana la 30 Tone 28-29 Self-powered trolley JLA 15/30 G for transport weights up to 30 metric tons
Role transportoare Seria G - Pana la 60 Tone 30-31 Transport trolleys for loads up to 60 metric tons Series G
Role transportoare in tandem JTLB Seria G - Pana la 30 Tone 32 Tandem transport trolleys for loads up to 30 metric tons Series G
Twistlock / Weld-on Cone pentru containere - pana la 60 Tone 33 Twistlock / Weld-on Cone transport of containers up to 60 metric tons
Role transportoare Seria H - Pana la 200 Tone 34-35 Transport trolleys for loads for loads up to 200 metric tons Series H
Echipament galvanizat (optinal) si solutii personalizate 42-43 Optional galvanized equipment and custom solutions
3
d
Cricuri Seria JH-G plus Ex Pag. 5 Cricuri Seria JHS Pag. 9
Jack Series JH-G plus Ex Page 5 Hydraulic jacks JHS Page 9
v
H1
V H2
H1
h2
h2
h1
nL h1
L1 nL
L2
Lb
L1
Lb
B
B
Cricuri Seria JH-G plus Pag. 6-7 Cricuri Seria JH-P Pag. 12
Jack Series JH-G plus Page 6-7 Jack Series JH-P Page 12
H2
v
h2 H1
h1
H2
nL
L1 L2
Lb H1
B
h2
h1
Cricuri Seria JHS Pag. 8
nL
Hydraulic jacks - JHS Page 8
B Lb
L2
Schieber 180 schwenkbar
L2
B
nL
d Lasche abgesttzt
Lb
H2
H1
L1
h2
h1
Lasche freistehend
Descarca catalog
Download catalog
Videoclipuri JUNG
JUNG product videos
Cilindri hidraulici 700 bar BVA Hydraulic cylinder 700 bar BVA
Conform BGV D8 (D) si ANSI / ASME (USA) Inspected according to technical regulation BGV D 8 (German) and ANSI/ASME (USA)
Inovativ Innovative
Usor Light
Compact Compact
Puternic Greutate redusa datorita inbuna- Strong
tatirilor constructive.
Extreme weight reduction through
improved construction. Maner detasabil JH 6 G plus
si JH 10 G plus.
Removable handle on JH 6 G plus
and JH 10 G plus.
Lucreaza si ridica in siguranta cu siste-
mul nostru patentat Pat.-Nr. 4413478.
Work and lift safely with our patented
lifting toe system (Pat.-No. 4413478).
Intretinere usoara datorita pompei unice,
usor de inlocuit - valva de siguranta pt.
presiune ce previne suprasarvina, filtru
de mizerie. Disponibil si cu pompa inte-
grata - JH G Ex
Easy maintenance through single exchan-
Talpa de ridicare oscilanta din fonta geable pump unit; safety pressure relief
pentru robustete maxima si preve- valve with dirt filter prevents overloa-
nirea rupturii. Otelul tratat rezistent ding. Also available without integrated
la impact si ofera siguranta maxima. pump unit. See JH G plus Series Ex-
Swiveling safety toe made from cast version.
iron for extreme robustness that
prevents fractures. The advanced
strength steel is impact resistant
and provides optimal safety.
Randament maxim prin sistemul care reduce
coeficientul de frecare .
Maximum output through reduced friction in the
lifting track with our patented slide shoe design.
4
JH 10 G plus Ex JH 15 G plus Ex JH 20 G plus Ex JH 30 G plus Ex
Conform BGV D8 (D) si ANSI / ASME (USA) Inspected according to technical regulation BGV D 8 (German) and ANSI/ASME (USA)
6 6
3
Vezi Pag. 14 pentru pompe manuale, Pag. 15 pentru furtune hidraulice si Please refer to page 14 for hand pumps, to page 15 for hydraulic
Pag. 13 pentru pompe electrice hoses, for electrical pumps to page 13
Cric Ex JJ 10 700 pana la 700 bar auf Anfrage erhltlich Hydraulic jack Ex JJ 10 700 with 700 bar is available on request
5
JH 6 G plus JH 10 G plus JH 10 G plus ku
Conform BGV D8 (D) si ANSI / ASME (USA) Inspected according to technical regulation BGV D 8 (German) and ANSI/ASME (USA)
6
JH 15 G plus JH 20 G plus
Conform BGV D8 (D) si ANSI / ASME (USA) Inspected according to technical regulation BGV D 8 (German) and ANSI/ASME (USA)
7
JSET 10/2 JSET 20/3
Conform BGV D8 (D) si ANSI / ASME (USA) Inspected according to technical regulation BGV D 8 (German) and ANSI/ASME (USA)
Vezi Pag. 14 pentru pompe manuale, Pag. 15 pentru furtune hidraulice si Please refer to page 14 for hand pumps, to page 15 for hydraulic
Pag. 13 pentru pompe electrice hoses, for electrical pumps to page 13
Seturi cricuri hidraulice cu pompe si furtune Hydraulic jacks with pump and hoses in one set
Model Set type JSET 52 JSET 102 JSET 103 JSET 203
Cric Jack 1 x JHS 5 2 x JHS 5 1 x JHS 10 2 x JHS 10
Furtun Hose 1 x JS 2 2 x JS 2 1 x JS 3 2 x JS 3
Pompa Pump JP 26 JP 26 JP 26 JP 26
Nr. de Comanda Order number 20 405 200-S 20 410 200-S 20 410 301-S 20 420 301-S
8
JSET 20/3 ku
Conform BGV D8 (D) si ANSI / ASME (USA) Inspected according to technical regulation BGV D 8 (German) and ANSI/ASME (USA)
Pag. 14 pt. pompe manuale, Pag. 15 pt. furtune hidraulice si Pag. 13 pt. pompe electrice Please refer to page 14 for hand pumps, to page 15 for hydraulic hoses, for electrical pumps to page 13
Seturi cricuri hidraulice cu pompe si furtune Hydraulic jacks with pump and hoses in one set
Model Set type JSET 103 ku JSET 203 ku
Cric Jack 1 x JHS 10 ku 2 x JHS 10 ku
Furtun Hose 1 x JS 3 2 x JS 3
Pompa Pump JP 26 JP 26
Nr. de Comanda Order number 20 410 305-S 20420305-S
9
JD 40 E+ VS JD 40 E+ VS
4x JHS 10
Sisteme de ridicare sincronizata disponibile: The following types of pressure blocks are available:
Model Type JD 40+ JD 40 E+ JD 40 E+ VS JD 80 E+ JD 80 E+ VS
cu pompa electrica with electrical pump neinno jayes jayes jayes jayes
pe carucior on a cart
Arc de revenire Spring return neinno jayes jayes jayes jayes
Dimensiuni Dimensions l mmin 120047.2" 120047.2" 120047.2" 120047.2" 120047.2"
Dimensiuni Dimensions b mmin 65025.6" 65025.6" 65025.6" 65025.6" 65025.62
Dimensiuni Dimensions h mmin 130051.2" 130051.2" 130051.2" 130051.2" 130051.2"
Presiune de lucru Working pressure bar 520 520 520 520 520
Nr. de Comanda Order number 04 450 403-D 04 400 405-D 04 400 403-D 04 800 403-D 04 800 405-D
Sulutii personalizate la cerere Custom solutions available on request
10
JD 40 E+ VS JD 40 E+ VS
4x JH 15 G plus 4x JH 10 G plus
Cricuri pentru JD 40 E+ VS Jacks to use with pressure block JD 40 E+ VS Sarcina in kgload capacity in kg
4x JH 6 G plus (cursa completa, fara arc de revenire) 4x JH 6 G plus (full stroke, without spring return) 24 000
4x JHS 5 (cursa completa, fara arc de revenire) 4x JHS 5 (full stroke, without spring return) 20 000
4x JH 10 G plus (cursa completa, fara arc de revenire) 4x JH 10 G plus (full stroke, without spring return) 40 000
4x JHS 10 / JH 10 G plus ku (cursa completa, fara arc de revenire) 4x JHS 10/JH 10 G plus ku (full stroke, without spring return) 40 000
4x JH 15 G plus (cursa redusa, fara arc de revenire) 4x JH 15 G plus (reduced stroke without spring return) 60 000
4x JH 15 G plus EX (cursa redusa, cu arc de revenire) 4x JH 15 G plus EX (reduced stroke with spring return) 60 000
4x JH 20 G plus (cursa redusa, fara arc de revenire) 4x JH 20 G plus (reduced stroke without spring return) 80 000
4x JH 20 G plus EX (cursa redusa, cu arc de revenire) 4x JH 20 G plus EX reduced stroke with spring return) 80 000
11
JSET 50/3
Vezi pag. 14 pentru pompe manuale, pag. 15 furtune hidraulice, pag. 13 Please refer to page 14 for hand pumps, to page 15 for hydraulic hoses,
pompe electrice for electrical pumps to page 13
Cric cu Pompa in Set Hydraulic jack with pump in one set Carucior Carucior trans-
transport in port in timpul
stationare folosirii
Model Set type JSET 503
Push back/transport Push back/transport
Cricuri Jack 1xJH 50 P cart standing cart transporting
Furtun Hose 2xJS 3
Pompa Pump 1xJPE 55 NVR
Carucior transport Push back / transport 1xJRS 1
Nr. de Comanda Order number 20 450 300-P 01 001 030-T JRS 1
12
JPE 30 NVR JPE 30/4 NVR JPE 55 NVR
Recomandari: cand se ridica o sarcina folosind 2 Recommendation: When lifting one side of a load
cricuri, folositi pompa externa manuala (vezi pag. with 2 jacks use external manual pump
14), pompa electrica JPE, pompa hidraulica JPL15 (see page 14), electrical pump type JPE or air
(vezi pag. 14). hydraulic pump JPL 15 (see page 14).
Vezi pag. 4-9, 12. pentru cricuri potrivite si pag. 15 pentru See pages 4-9, 12 for suitable jacks and page
furtune hidraulice. 15 for hydraulic hoses.
Folosire pompa electrica JPE 30-NVR cu 2 cricuri Electric pump JPE 30-NVR with 2 jacks in operation
JPE 30 NVR JPE 30/4 NVR JPE 55 NVR JPE 30 NVR JPE 30/4 NVR JPE 55 NVR
Versiune standard Versiune inbunatatita Versiune standard Standard version Extended version Standard version
Echipata cu 2 cuple hi- Echipata cu bloc de cuple Echipata cu 2 cuple hidrau- Equipped with 2 hydraulic Equipped with connection Equipped with 2 hydraulic
draulice, 1 manometru si JNB 2-E, cu droser si 4 x JNB lice, 1 manometru si dro- connection nipples, 1 block JNB 2-E, with lowe- connection nipples, 1
droser de precizie. 1-E. Alte versiuni disponibile ser de precizie si 1 cupla manometer, precision ring speed control valve gauge, precision lowering
la cerere. hidraulica pentru conectare lowering control. and 4 x JNB 1-E. Other control and 1 extra hy-
carucior push-back . versions available on draulic connection for push
request. back transport cart.
13
JP 26 JPL 15
Aplicatie cricuri JHS 10 si pompa JP 26 Application with JHS 10 and JP 26 Pompna hidraulica manuala Pompa hidropneumatica
Hydraulic hand pumps Air hydraulic pumps
Model Type JP 26 JPL 15
Volum rezervor ulei/ util Oil volume complete usable L 2,1 2.0 1,51.5
Presiune de lucru Working pressure bar psi 520 7540 0 - 7000 - 10150
Debit la presiune mica Flow rate without load L min 1,07
Debit la presiune mare Flow rate with load L min 0,18
Conexiune aer Air connection bar 7-14
Debilt / actionare Flow rate per stroke L 0,0132 (0-14 bar)0.0023 (14-520 bar)
Cuple Connections Buc. pcs. 2 2
Dimensiuni LxBxH Dimensions LxWxH mm in 770 x 170* x 16930.3" x 6.7" x 6.7 380 x 136 x 18515" x 5.4" x 7.3
Greutate Weight with oil an cart kg lbs 13.0 28.6 9,019.8
Nr. de Comanda Order number 02 260 000-P 02 150 000-PL
* Latime pedala * Width foot plate
14
01. 02. 03. 04.
Accesorii Accessories
pentru Cricuri for jacks
02. Maner pentru JH 10 G plus ku si 6/10 G plus 02. Handle for JH 10 G plus ku and 6/10 G plus
Prindere cu surub, pentru Cric Pag. 6 For screw attachment for jack on page 6
04. Piston cu arc de revenire 04. Assembly of hollow piston with spring return
Pentru cricuri JH 1520 G plus si JH 1520 G plus Ex Re-fitting of hydraulic jacks type JH 1520 G plus and JH 1520 G plus EX-
version is possible
Model Type JH 15 G plus JH 20 G plus
mm in 60 mm2.6 70 mm2.8
Nr. de Comanda Order number 91 156 457-B 91 206 457-B
Furtune hidraulice pentru pompele hidraulice si electrohidraulice Hydraulic hoses for our hydraulic and electrical hydraulic pumps
L
Cupla Coupling
Furtun hidraulic (factor de siguranta 4:1), presiune de lucru max. 700 bar, plin cu ulei, gata de folosire Hydraulic hose (safety factor 1:4), max. working pressure 700 bar 10150 psi, oil-filled, ready for use
15
JKB 3 K JLF 3,5 M
Seria M
Series M
Pentru informatii suplimentare referitaore la role vezi Pag. 40-41/1 Please refer to page 40-41/1 for additional roller information
J L B 3 K
16
JKB 1,5 K JKB 3 K
Conform BGV D8 (D) si ANSI / ASME (USA) Inspected according to technical regulation BGV D 8 (German) and ANSI/ASME (USA)
Disponibil cu / Available with: Disponibil cu / Available with: Exemplu de distrinutie a 9to pe set JKB3:
JUWAmid JUWAmid alb Example for load distribution on 9 tons JKB 3 Set:
JUWAmid-coated JUWAmid-coated white
Vezi pag. 40-41/1 pentru informatii suplimentare referitoare la role Please refer to page 40-41/1 for additional roller information
Pana la Load weight up to 1,5to metric tons 3to metric tons 3to metric tons 6to metric tons
Model Type Desen/Sketch JKB 1,5 K JKB 1,5 Set JKB 3 K JKB 3 Set
Include Includes 1 x JKB 1,5 K 2 x JKB 1,5 K 1 x JKB 3 K 2 x JKB 3 K
Sarcina Load capacity kg lbs 1500 3300 2 x 1500 2 x 3300 3000 6600 2 x 3000 2 x 6600
Nr. Role Number of castors Buc.pcs. 6 2x6 8 2x8
Dimensiuni Role Castor dimensions xI mm in 85 x 43 3.4" x 1.7" 85 x 43 3.4" x 1.7" 85 x 43 3.3" x 1.7" 85 x 43 3.3" x 1.7"
Inaltime Height mm in 110 4.4" 110 4.4" 110 4.3" 110 4.3"
Suprafata rotativa Supporting surface of turntable C mm in 150 5.9" 150 5.9" 250 9.8" 250 9.8"
Dimensiuni Caseta Cassette dimensions L1xB1 mm in 530 x 490 20.9" x 19.3" 530 x 490 20.9" x 19.3" 690 x 460 27.2" x 18.1" 690 x 460 27.2" x 18.1"
Greutate cu JUWAmid Weight JUWAmid kg lbs 20 4.4 40 88 34 75 68 150
Nr. Cda. cu JUWAmid Order-no. with JUWAmid 14015 085-P 14015085-D 14 030 085-P 14 030 085-D
17
JKB 4 K JKB 6 K
Conform BGV D8 (D) si ANSI / ASME (USA) Inspected according to technical regulation BGV D 8 (German) and ANSI/ASME (USA)
Role JKB 6 in uz
Revolving trolley JKB in action.
Pentru informatii suplimentare referitoare la role vezi pag. 40-41/1 Please refer to page 40-41/1 for additional roller information
Pana la Load weight up to 4 to metric tons 8 to / metric tons 6 to metric tons 12 to / metric tons
Model Type Desen/Sketch JKB 4 K JKB 4 Set JKB 6 K JKB 6 Set
Include composed of 1 x JKB 4 K 2 x JKB 4 K 1 x JKB 6 K 2 x JKB 6 K
Sarcina Load capacity kg lbs 4000 8800 2 x 4000 2 x 8800 6000 13200 2 x 6000 2 x 13200
Nr. Role Number of castors Buc.pcs. 12 2 x 12 16 2 x 16
Dimensiuni Role Castor dimensions xI mm in 85 x 43 3.3" x 1.7" 85 x 43 3.3 x 1.7" 85 x 43 3.3" x 1.7" 85 x 43 3.3" x 1.7"
Inaltime Height mm in 110 4.3" 110 4.3" 110 4.3" 110 4.3"
Suprafata rotativa Supporting surface of turntable C mm in 250 9.8" 250 9.8" 250 9.8" 250 9.8"
Dimensiuni Caseta Cassette dimensions L1xB1 mm in 690 x 475 27.2" x 18.7" 690 x 475 27.2" x 18.7" 690 x 525 27.2" x 20.7" 690 x 525 27.2" x 20.7"
Greutate cu JUWAmid Weight JUWAmid kg lbs 43 95 86 190 44 97 89 194
Nr. Cda. cu JUWAmid Order-no. with JUWAmid 14041085-P 14041085-D 14 061 085-P 14 061 085-D
18
JKB 7,5 K
Conform BGV D8 (D) si ANSI / ASME (USA) Inspected according to technical regulation BGV D 8 (German) and ANSI/ASME (USA)
Pentru bare de legatura si manere vezi Pag. 36-37 Please see page 36-37 for compatible connecting bars and pulling handles
19
JLB 3 K JLB 6 K
JFB 3 K JFB 6 K
Conform BGV D8 (D) si ANSI / ASME (USA) Inspected according to technical regulation BGV D 8 (German) and ANSI/ASME (USA)
pentru orice podea pentru podea plana si curata pentru podea dura
for any floors for level and clean floors for not sensitive floors
Nr. Cda./order number Nr. Cda./order number Nr. Cda./order number
6t
95 050 057-V 95 050 023-P 95 050 043-S
12 t
3t
3t
20
JL 9 K JL 12 K
JFB 9 K JFB 12 K
Conform BGV D8 (D) si ANSI / ASME (USA) Inspected according to technical regulation BGV D 8 (German) and ANSI/ASME (USA)
21
JLB 7 K JL 10 K
JFB 7 K JFB 10 K
Conform BGV D8 (D) si ANSI / ASME (USA) Inspected according to technical regulation BGV D 8 (German) and ANSI/ASME (USA)
pentru orice podea for any floors Please refer to page 40-41/1 for
Nr. Cda./order number 95 050 089-D additional roller information
7t
14 t
3,5 t
3,5 t
Rolele cu rulmenti garanteaza miscarea usoara Castors with ball bearings guarantee easy movement
22
JL 14 K
JFB 14 K
Conform BGV D8 (D) si ANSI / ASME (USA) Inspected according to technical regulation BGV D 8 (German) and ANSI/ASME (USA)
Descriere Description
Axe galvanizate si inele de siguranta pentru protectie impotriva coroziunii. Galvanized axles and safety clip rings for improved protection against corrosion.
Sistemul de role duble usureaza foarte mult manevrarea in curbe scurt, reducand The double roller design results in dramatically easier steering due to reduced
frecarea. O prea mica aderenta poate cauza rolele din spate sa devieze de la friction forces in curves. The much lower friction resistance also causes the rollers
curs. on the rear axis to follow in a truer course.
Cu 30 % mai putina forta necesarar pentru virare. You need 30% less power for steering.
Capacitate mai mare la aceleasi dimensiuni ca si seria K cu role profesionale. Higher capacity at same dimension as Series K trolleys with Profesional castors.
Toate seturile de role sunt pregatite de folosire. Rolele transportoare includ bara All transport trolleys are ready for use: Steerable transport trolley includes ball
de tractiune si manerul, rolele din spate au bara de legatura. bearing supported turntable and a handlebar, the adjustable-width transport trol-
Seria K este acum disponibila si cu maner de tractiune detasabila Pag. 36-37. ley consists of two load cassettes and Connecting bar.
Role care nu lasa urme. The Series K handle bars are now also available with a removable handle.
(See on page 36-37).
Non-marking support wheels.
Maner detasabil
Removable handle
23
JTLB 6 K JTLB 14 K
Descriere Description
Axe galvanizate si inele de siguranta pentru protectie impotriva coroziunii. Galvanized axles and safety clip rings for improved protection against corrosion.
Sistemul de role duble usureaza foarte mult manevrarea in curbe scurt, reducand The double roller design results in dramatically easier steering due to reduced
frecarea. O prea mica aderenta poate cauza rolele din spate sa devieze de la friction forces in curves. The much lower friction resistance also causes the rollers
curs. on the rear axis to following in a truer course.
Gata de folosit: 2 role conducatoare cu 2 manere si 2 bari de conectare in tan- Ready for use: 2 interconnected steerable trolleys with 2 handlebars and two
dem. tandem Connecting bars.
Multifunctionale: se pot folosi si individual fara alte accesorii. Multi-purpose use: Also useable as two single trolleys, each with half of the
Role care nu lasa urme. combined load capacity. No additional accessories needed.
Non-marking support wheels.
pentru orice podea for any floors Please refer to page 40-41/1 for Example: For short radius curves
Nr. Cda./order number 95 050 089-D additional roller information Steering possible up to 45
24
JL 18 S JL 24 S
JF 18 S JFB 24 S
Pentru informatii suplimentare referitoare la role vezi pag. 40-41/1 Please refer to page 40-41/1 for additional roller information
25
JLF 3,5 JLF 5
JUWAthanAl cu miez de Al
Role JUWAthanplus Profesional cu
JUWAthanplus-coated aluminium core miez de Al
Profesional castor JUWAthanplus-coated
aluminium core
pentru orice podea / for any floors pentru orice podea for any floors
Nr. Cda./order number 95 050 131-V Nr. Cda./order number 95 050 089-D
26
JLF Set 12 JLF Set 15
Exemplu folosire ca role in spate Example as adjustable trolley Exemplu de folosire ca role conducatoare Example as tandem transport trolley
27
JLA 15/30 G
Descriere Description
Usor de folosit. Conectati la sursa de aer comprimat si folositi. Quick set up. Connect air supply hose and go.
Nu are nevoie de sursa suplimentara de tractiune. No need for tugger.
Sistem propulsant usor de intretinut. Low maintenance propulsion system.
Toate furtunele se desfac usot pentru transport usor si compact. All hoses are detachable for compact and easy transport
Rotire la 360. 360 maneuverable.
Nu are nevoie de baterii. No need to charge any batteries.
Prietenos cu mediuil, foloseste numai aer comprimat. Ecofriendly, uses only compressed air.
Necesita alimentare cu aer comprimat, presiune 8bar si debit de 1500 Lmin (25 Requires standard shop air connection with 8 bar (116 psi) and air volume of
Ls). 1500 L min (25 L s) or (53 SCFM).
Viteza de innaintare si controlul directiei este usor, fara socuri. No step seamlessly controllable speed and direction.
Compatibile cu role seria G (Pag. 24-25). Compatible with G-Series transport trolleys (page 24-25).
Modelul JLA 1530 G include rola si unitatea de control. Model JLA 15 30 G includes the trolley and remote control unit.
Cele 2 motoare pneumatice sunt controlate individual de 2 joystck-uri. Two air motors are independently controllable through two joysticks.
Manevrabilitate: Inainte, inapoi, rotire pe loc. Maneuverability: Forward, reverse, in place turning.
Capacitati mai mari disponibile la cerere. High capacities available on request.
Capacitati mai mari disponibile la cerere. Ulei de ungere si spray pt. lant disponibile ca si accesorii High capacities available on request. Lubricating oil and chain spray available as accessory.
28
JLA Set 2 JLA Set 3
JLA Set in uz JLA Set in action JLA Set in uz JLA Set in action
JLA Sets
Model Type JLA Set 2 JLA Set 3
JLA cu unitate de control JLA incl. control box 1x 1x
Lungime FurtunDiametru Hose lengthdiameter 30 m19 mm 11810,75 30 m19 mm 11810,75
Carucior + ulei + spray lant Cart + oil + chain spray 1x 1x
JFB 15 G JFB 15 G 1x
Nr. de Comanda Order number 22 150 140-VP2 22 150 140-VP3
29
JLB 15 G JLB 22 G
JFB 15 G JFB 22 G
JUWAthanplus cu miez de Al
JUWAthanplus-coated aluminium core
30
JL 30 G
JFB 30 G
Descriere Description
Rolele pivotante din caseta asigura distributia egala a greutatii pe toate rolele si Pivoting roller cassettes within the frame assure even pressure distribution across
pe podea. Nu are nevoie de sistem hidraulic de compensare. all rollers and across the floor. No need for complex and expensive hydraulic
Design-ul cu role duble inbunatateste semnificativ rezistenta la frecare usurand compensation system.
manevrabilitatea. Rezistenta mica la frecare permite si rolelor din spate sa urme- The double roller design results in dramatically easier steering due to reduced
ze traseul celor din fata. friction forces in curves. The much lower friction resistance also causes the rollers
Toate rolele sunt pregatite de folosire cu bara de tractiune si barele de legatura on the rear axis to follow in a truer course.
asa cum se poate vedea in imagine. All transport trolleys are ready for use: The steerable transport trolley is fitted
with a ball bearing supported turntable and a handlebar (as shown in picture).
The adjustable-width transport trolley consists of two transport units and Connec-
ting bar.
31
JTL 15 G JTLB 30 G
Descriere Description
Rolele mari garanteaza caracteristici optime de rulare pe suprafete inegale si Large rollers provide optimal rolling characteristics on uneven surfaces and rough
pardoseala denivelate ( 140 mm x 59 mm). pavements.
Trece in siguranta peste obstacole mici, crapaturi in beton si cai de rulare ingro- Safely overcomes small ledges, cracks in the concrete and countersunk rail tracks.
pate. Multi-purpose use: Also useable as two single trolleys, each with half of the com-
Multifunctionale: se pot utiliza si individual, cu sarcina la jumatate din valoarea bined load capacity. No additional accessories needed.
totala. Nu sunt necesare alte optionale. Custom solutions available: For longer track and Connecting bars please refer to
Disponibile si la dimensiuni solicitate de clienti. accessories on page 36.
Bari de legatura - vezi Pag. 36.
Exemplu:
Disponibil cu / Available with: Pentru rotire in scurt pana la 45 La comanda sunt disponibile cu TWISTLOCK
Example: For short radius curves Available with twistlock via special order
JUWAthanplus cu miez de Al Steering possible up to 45
JUWAthanplus-coated aluminium core
Vezi pag. 40-41/1 pentru informatii suplimentare referitoare la role Please refer to page 40-41/1 for additional roller information
32
JTLB 14 K JTLB 30 G
+ Weld-on Cone + Twistlock
JFB 14 K JFB 30 +
+ Weld-on Cone Twistlock
Sistem Weld-on Cone System pentru seria K - vezi pag. 20-24 pentru detalii tehnice Weld-on Cone system for Series K please refer to page 20-24 for technical details
Model Type Desen/Sketch JTLB 14 K JFB 14 K
Inaltime Height h1 mm in 110 4.3" 110 4.3"
Inaltime Height h2 mm in 180 7.1" 180 7.1"
Lungime ISO ISO-length V mm in 2260 89" 2260 89"
Lungime Latime - total Total lengthwidth L1 x B1 mm in 1070 x 2850 42.1 x 112.2"
Nr. de Comanda Order number 12 121 085-WZ 08 141 085-WOC
Sistem "Twistlock" pentru detalii tehnice vezi pag. 30-31 Twistlock system please refer to page 30-31 for technical details
Model Type Desen/Sketch JTL 15 G JTL 30 G JFB 15 G JFB 22 G JFB 30 G
Inaltime Height h1 mm in 215 8.5" 215 8.5" 215 8.5" 215 8.5" 215 8.5"
Inaltime Height h2 mm in 300 11.8" 300 11.8" 300 11.8" 300 11.8" 300 11.8"
Lungime ISO ISO-length V mm in 2260 89" 2260 89" 2260 89" 2260 89" 2260 89"
LungimeLatime total Total lengthwidth L1 x B1 mm in 1260 x 2700 49.6" x 106.3" 1620 x 3000 63.8" x 118.1"
Nr. de Comanda Order number 12 150 140-TZ 12 302 140-TZ 10 151 140-T 10 221 140-T 10 302 140-T
33
JLB 40 H JLB 60 H
JFB 40 H JFB 60 H
Vezi pag. 40-41/1 pentru informatii suplimentare referitoare la role Please refer to page 40-41/1 for additional roller information
34
JL 80 H
35
01. 02. 03. 04. 05.
Extensie bara de tractiune Bara de legatura-set de Bara de legatura extinsa Maner de tras cu inel Cadru tandem
Pulling handle extension extensii Extended connecting bar Pulling handle towing eye Extension tandem bar
Connecting bar extension set
02. Bara de legatura - set de extensii 02. Connecting bar extension set
Pentru extinderea barilor de legtura standard. Pentru Role transportoare pag. 20-23. For insertion between the standard connecting bars. For trolleys on page 20-23.
04. Maner de tras cu inel 04. Pulling handle with towing eye
Pentru Role conducatoare JLB 3 K Pag. 20 si JTLB 6 K Pag. 24. For steerable trolleys JLB 3 K on page 20 and JTLB 6 on page 24.
36
06. 07. 08. 09. 10.
Bara de tractiune JKB Bara de legatura JKB Bara de trctiune cu maner detasabil Bara trtactiune Seria M Bara de legatura Seria M
Pulling handle JKB Connecting bar JKB Handle bar with removable handle Pulling handle Series M Connecting bar Series M
08. Bara de tractiune cu maner detasabil 08. Pulling handle with a removable handle
Pentru Role Seria K Pag. 20-23. Alternativ ca si completare la bara standard. For Series K trolleys on page 20-23. Available as complete pulling handle or as
retrofit kit for existing pulling handles.
Model Type K-SeriaSeries K K-SeriaSeries K
Lungime Length mm in 1210 mm47.6 Handgriff + Bolzenhandle + bolt
Nr. de Comanda Order number 92 010 122-B 92 090 300-B
37
JLT 3
JRH 3 JLT 5
Descriere Description
Clema de transport Forklift hitch
pentru inpins/tras sarcini. Include lant de siguranta, potrivit pentru orice rola for pushing and pulling loads. Includes binder chain to secure to forklift. Fits any
transportoare Jung cu inel de tractiune. JUNG dolly outfitted with a towing eye.
Fixati pe lamele stivuitorului, asigurati cu lantu si puteti lucra. Simply place on forklift forks, secure with binder chain and go.
Sarcina incarcare: 3 to. 3 ton load capacity.
Pentru tras/inpins. Capable of moving loads forward and in reverse.
Usor de manipulat. Easy maneuverability.
38
JGK-A JGK-R
Nou New
Accesorii pentru motostivuitoare Accessories for forklifts
Chingi si cleme forklift clamps
Descriere Description
Set de chingi si cleme pentru ancorare sarcina Set of forklift clamps with tie-down straps
pentru ancorare in siguranta. for binding and securing.
Asigura marfa valoroasa si instabila contra alunecarii. Secure valuable and unstable loads against slipping.
Muta in siguranta sarcini cu centrul de grutate ridicat. Move top heavy loads more securely.
Fixati pe lamele motostivuitorului si gata. Simply attached the screw type fork clamps to the forks behind the load.
Prindeti clemele pe varful lamelor si ancorati cu chingi pentru transport in sigura- Slide eye type fork clamps onto the tips of the forks and strap load in between
na. for safe transport.
JFiecare set include 2 cleme cu surub, 2 cleme tip ochi si 2 chingi. Each set includes 2 screw type fork clamps, 2 eye type fork clamps and 2 tie-
down straps.
1 2
Latime 157mm Latime 107mm Fits fork width 4.0", 5.0" and 6.0"
Width 6.2" Width 4.2"
Exemplu de ancorare cu cleme si chingi Secure loads with forklift clamps and tension belts
39
Seria K Seria K Profesional JKB Seria G Seria S Seria H Seria H
Series K Series K Profesional JKB Series G Series S Series H Series H
JUWAthanplus JUWAthan
Role durabile pentru orice aplica- Sturdy castors for any application
tie acoperire de inalta calitate high quality coatings
Descriere Description
JUWAthan : Disign role JUWAthan: in jurul unei bare de otel. Doi rulumenti cu
JUWAthan castor design: The coating is molded around a steel core. Two preci-
bile sunt presati in bara de otelt. sion ball bearings are pressed into the steel core.
JUWAthan plus: Design JUWAthanplus: pe baza rolelor JUWAthan, noile JUWAthan plus castor design: Based on the JUWAthan roller, the new
JUWAthanplus au un invelis exterior inbunatatit. NOU: bara de aluminiu JUWAthan-plus castor has a new and improved coating material and a more
inlocuieste pe cea de metal rezultand o manevrabilitate mai usoara si acceasi advanced construction. NEW: An aluminum core replaces the steel core for easier
rezistenta. Liantul de poliuretan uneste cele doua componente. Aceasta constructie handling at the same strength. A polyurethane based lining material is bonded
reduce coeficientul de frecare si greutatea cu 30%.. around the aluminum core. This construction reduces the rolling resistance and
JUWAthan Profesional: seria profesionala este dezvoltata pe baza weight by nearly 30 percent.
JUWAthanplus. Acest sistem una langa alta asigura o portanta mai mare (rulu- JUWAthan Profesional: The Profesional Series roller was developed based on
menti 2 x2) si ofera reducere mare a coeficientului de frecare. the JUWAthan plus roller. The side-by-side double roller system provides higher
load capacity (2x2 ball bearings) and offers greatly reduced rolling resistance.
Turning of the steerable trolley requires less force because the rollers can turn
against one another resulting in extremely reduced friction between surface and
roller. The much lower friction resistance also causes the rollers on the rear axis
to follow in a truer course.
Desen D d
40
Seria K JKB R JKB Seria K Seria S
Series K JKB R JKB Series K Series S
JUWAmid Otel
Role durabile pentru orice aplica- Sturdy castors for any application
tie acoperire de inalta calitate high quality coatings
Descriere Description
Disign role JUWAmid: in jurul unei bare de otel. Doi rulumenti cu bile sunt presati in JUWAmid castor design: The coating is molded around a steel core. Two precision
bara de otel. ball bearings are pressed into the steel core.
Disign role de otel: din bara de otel. Doi rulumenti cu bile sunt presati in bara de Steel castor design: The steel body is made of a seamless steel tube. Two ball
otel. bearings are pressed into the body.
Optime pentru medii sensibile, gen camere curate Rezistenta marita la coroziune.
Rezistente la chimicale diluante precum turpentina.
A se folosi JUWAthan plus JUWAmid Otel Recommended use for JUWAthan plus JUWAmid Steel
JUWAthan Profesional JUWAthan Profesional
411
Role transportoare Seria S Pag. 25 Role autopropulsate Pag. 28-29
Transport trolleys Series S Page 25 Self-powered trolley Page 28-29
Desen JLA 15/30 G
Sketch JLA 15/30 G
Desen JL 18 S
Sketch JL 18 S
l
L1
L1
C
C I
B1 B1
l
L2 E
L1
G-H
C
B1
B2 F
L2 E
L1
G-H
l
Role transportoare Seria G Profesional Pag. 31 Role transportoare Seria H Pag. 34-35
Transport trolleys Series G Profesional Page 31 Trolleys Series H Page 34-35
Desen JL 30 G Sketch JL 30G Desen JL 80 H Sketch JL 80 H
L1
L1
C
C
B1
B1
Desen JFB 30 G Sketch JFB 30G Pag. 31 Desen JFB 80 H Sketch JFB 80 H Pag. 34-35
Page 31 Page 34-35
B2 F B2 F
L2 E L2 E
G-H G-H
Desen JTLB 30 G Sketch JTLB 30 G Desen JFB 120 H Sketch JFB 120 H Pag. 35
Page 35
V min - V max
F
C
L1
L2
B2 L2 E
B1
B2
Twistlock / Weld-on Cone Pag. 33
Twistlock / Weld-on Cone Page 33
h2
h1
Role transportoare rotative JKB Pag. 17 Role transportoare Seria K Pag. 20-21
Revolving Transport Trolley JKB Desen JKB 3 K Page 17 Transport trolleys Series K Page 20-21
Sketch JKB 3 K B1
B1 B1
C C
L1
L1
L1
l
I
Desen JL 9 K
C Sketch JL 9 K
Desen JKB 1,5 K Sketch JKB 1,5 K I
Desen JL 14 K
Sketch JL 14 K
L1 L1
l
L1
l l
C
B1
Role transportoare rotative JKB Pag. 19 B2
F
Revolving Transport Trolley JKB Page 19
Desen JFB 14 K
Sketch JFB 14 K
B1 L2 E
C
G-H
Desen JTLB 14 K
Sketch JTLB 14 K
l
C L2 L1
B2
JHT 18 S JHT 18 S
Hydro-TransportorSarcina Hydro-transporter
pana la 3,8 to for loads up to 3,8 to
Descriere Description
Ideal pentru mutat dulapuri, safe-uri, cutii sau masini. Sunt sigure si usor de Hydro-Transporter are ideal for moving cabinets, safes, boxes or machines.
folosit. Setul contine doua unitati si chinga de legatura. They are easy and safe in use. One transporter consists of 2 transport units
Cu sistemul hidraulic de incarcare din ambele parti folosirea este foarte usoara. and a belt to connect. The transport units are attached on the sides of the
load and connected with the standard belt.
Manevrarea se poate face cu ajutorul ghidoanelor de pe ambele unitati, care,
sunt conectate la rotile mari echipate cu rulmenti. Legatura intre ele asigura While pumping up the movable part of the transporter on both sides the load
paralelismul rotilor. is lifted and ready for moving.
Unitatile sunt usor de transportat impreuna. Steering can be done by the top link bars on each unit, connected with the big
wheels equipped with ball bearings. The linkage guarantees that the wheels are
always in parallel direction.
Both transport units are easy to transport togehter.
Desen JHT 18 S
Sketch JHT 18 S
412
Echipamente galvanizate si solutii Galvanized steel equipment and
personalizate au la baza echipamente standard custom designs based on standard product line
Descriere Description
Pentru folosirea in medii curate cu directive speciale. Capable for employment in sensitive environments having to conform to standards
Ofera protectie la coliziuni, nu se cujesc sau ciobesc. such as clean rooms.
Protectie inbunatatita la rugina. Provides collision protection against chipping and peeling of finish.
Nu se dizolva acoperirea in medii chimice. Improved defense against corrosion.
Prevents damage from paint dissolving chemicals like turpentine.
JH 6
JKB 3
JLB 6 K
JFB 6 K
42
Solutii personalizate Custom designs
au la baza echipamente standard based on standard product line
Role speciale /
JTL 15 Tandem sistem tractiune
43
PUTEREA NOASTRA: MAI MULTE IDEII. OUR STRENGTH: MORE IDEAS.
Ne rezervam dreptul de a face modificari tehnice in scopul inbunatatirii calitatii si a functionabilitatii We reserve the right to make technical modifications which serve to improve function and quality.
Made in Germany 05.2014 Printed in Germany Made in Germany 05.14 Printed in Germany
www.role-cricuri.ro
Note