Documente Academic
Documente Profesional
Documente Cultură
haus.com.tr
INCREASE THE EFFICIENCY, ELIMINATE THE RISKS
Centrifuge separators which are being used for separating of 2 liquids (two pha-
se) from each other, liquid from solids (two phase) or two liquids and solids (th-
ree phase) from each other became a standard equipment for dairies from small
to big size.
In modern dairies there are several different applications of centrifuge separators
for processing of milk. Some of them are as follows;
Cream separation
Milk clarification
Whey separation
Whey clarification
Milk standardization
New generation self cleaning separators plays a key role in increasing the
efficiency of the dairies. Fully automated control systems of separators can be
easily integrated in the complete process lines.
APPLICATIONS
CREAM SEPARATION
HAUS MAXCREAM series centrifuge separators are specially
designed for separating the cream from milk. While separating
the cream you can as well get rid of the unwanted solid particles
in milk. Solid particles are forced to the outer surface of rotating
bowl by very high centrifugal forces.
With the help of disc set inside the bowl, surface area of
settlement is increased and separation process become
much faster. Arrangement of disc set and design provides the
separation of the particulars from milk continuously. Separated
solid particles are collected in solids holding space inside the
bowl and discharged outside at certain time intervals via a PLC
which enables fully automation.
Skimmed milk and cream leaves the separator from top of the
bowl through different channels. Phases are collected in different
containers and each liquid phase leaves the bowl through a
centripetal pump under pressure. Containers are isolated from
each other in order to prevent mixing of cream and skim milk.
CLEANING OF MILK
MAXCLEAN separators undertake the task of clarification of milk
and making free of harmful bacteria in the milk.
With the help of disc set inside the bowl, surface area of
settlement is increased and separation process become
much faster. Arrangement of disc set and design provides the
separation of the particulars from milk continuously. Separated
solid particles are collected in solids holding space inside the
bowl and discharged outside at certain time intervals via a PLC
which enables fully automation.
SELF CLEANING SEPARATORS
Self-cleaning separators enables the operation to be continuous.
Milk is fed into the bowl of the separator softly. With the help of
high centrifugal forces within the bowl solids are separated from
milk through disc stack. Solids are collected in the solid holding
space where they are discharged automatically out of the bowl
within preset time intervals. Discharge mechanism can be
adjusted very precisely in order to minimize the product losses.
Intervals can be set from the PLC.
HAUS MAX SERIES CREAM
SEPARATORS AND MILK CLARIFIERS
All surfaces in contact with milk and cream are subjected to metal
removing process and thus a smooth surface is obtained. This
smooth surface prevents the formation of bacteria and enabless
more efficient cleaning (CIP).
Feed zone of the bowl is specially designed to prevent milk from
coagulation.
Separator cover is fully made of stainless steel and body is cladded
with stainless steel.
Short spindle design enables the bowl to reach higher speeds
more safely with lower vibration and less energy consumption.
All areas within the bowl which are in contact with milk are
rounded in order to prevent the accumulation of any product.
Bowl is made of duplex stainless steel as standard.
The advantages of flat-belt drive system:
Lower energy consumption due less loss in power transmission.
Noise level is low.
Stopping of the separator is not needed to change the oil.
Less Maintenance is required.
Disassambling of bowl is not needed to change the belt.
MOST EFFICIENT SEPARATORS OF ITS CLASS SPECIALLY
DESIGNED FOR ALL SIZE DAIRIES
Soft and regular milk inlet to No dead spots inside the bowl
separator bowl assures high and on other surfaces which are
seperation efficiency . in contact with milk.
TECHNICAL DATA
All parts of the machine which are in contact with the product or any
components of the product are manufactured in accordance with
international food regulations or stainless steels suitable for the product
to be processed.
info@haus.com.tr
haus.com.tr
CENTRIFUGE TECHNOLOGIES