Documente Academic
Documente Profesional
Documente Cultură
PERANCANGAN KULIAH
LECTURE PLAN
MATLAMAT (GOALS):
The goal of this course is to improve the understanding and knowledge of the students in electrical &
electronics of automotive system fulfill the requirement in mechanical engineering technology.
SINOPSIS (SYNOPSIS):
Topik yang diliputi: Pengenalan, Sistem Pendawaian Elektrik Kenderaan, Sistem Pengurusan Enjin, Jaringan
& Komunikasi Automotif, Kerja Praktikal
Topics to be covered: Introduction, Vehicle Electrical Wiring System, Monitoring and Control, Engine
Management Systems, Automotive Network & Communications, Practical Work
Pada akhir kursus ini, pelajar dapat menggunakan pengetahuan dan kemahiran yang telah dipelajari:
(1) Dapat membezakan secara ringkas antara prinsip dan fungsi sistem elektrik & elektronik
automotif. (PLO1-C4)
(2) Dapat menunjukkan kemahiran praktikal di dalam sistem elektrik & elektronik automotif.
(PLO2 P4)
(3) Menunjukkan hubungan kerja yang baik dengan ahli kumpulan. (PLO5 - A3)
(1) Distinguish briefly the principle and function electrical & electronics of automotive system. (PLO1-
C4)
(2) Display practical skill in electrical & electronics of automotive system. (PLO2- P4)
(3) Demonstrate good working relation with team members. (PLO5-A3)
ASSIGNMENT:
RPP-04 / Prosedur Pelaksanaan Kuliah
Edisi: 4 / No. Semakan: 0
Lampiran A
Students will carry out an assignment which relates to the application of electric and electronics in
automotive.
PROJECT/ LABWORK:
Laboratory work will be held at IKBN Temerloh, Pahang on 2~6 April 2017. The schedule for the
Laboratory work as per attached.
PENTAKSIRAN (ASSESSMENT):
1. Tugasan (Assignment) : 15 %A3/PLO5
2. Ujian (Test) : 10 %C4/PLO1
3. Laboratory Work : 35 %P4/PLO2
4. Peperiksaan Akhir (Final Examination) : 40 %C4/PLO1
Jumlah (Total) : 100 % (50% C, 35% P, 15% A)
RUJUKAN (REFERENCES):
1. Allan W. M. Bonnick, 2011, Automotive Computer Controlled Systems, Routledge Taylor and Francis
Group Publisher
2. Bosch, R., 2008, Automotive Electrics-Automotive Electronics : Systems and components, 5th Edition
Stuttgart, Professional Engineering Publishing
3. Bosch, R. 2006, Bosch Automotive Handbook , 7th Edition, Bentley Publishers
4. Tom Denton, 2011, Automobile Mechanical and Electrical Systems, Butterworth-Heinemann
Publications
5. Tom Denton, 2011, Automobile Electrical and Electronic Systems, Routledge Taylor and Francis Group
Publisher
1. Pelajar mesti hadir tidak kurang dari 80% masa pertemuan yang ditentukan bagi sesuatu kursus termasuk
kursus HadirWajib (HW) dan kursus Hadir Sahaja (HS).
Students must attend not less than 80% of the contact hours specified for a course including Compulsory
Attendance (HW) course and Attendance Only (HS) course.
2. Pelajar yang tidak memenuhi perkara 1 di atas tidak dibenarkan menghadiri kuliah dan menduduki
sebarang bentuk pentaksiran selanjutnya. Markah sifar 0 akan diberikan kepada pelajar yang gagal
memenuhi perkara 1. Manakala untuk kursus HW, pelajar yang gagal memenuhi perkara 1 akan diberi
gred Hadir Gagal (HG).
Students who do not fulfill item 1 of the above are not allowed to attend further lecture and sit for any
form of assessment. Zero 0 mark will be given to students who fail to comply with item 1. As for HW
course, students who fail to comply with item 1 will be given Failure Attendance (HG) grade.
3. Pelajar perlu patuh kepada peraturan berpakaian yang berkuat kuasa dan menjaga disiplin diri masing-
masing untuk mengelakkan dari tindakan tatatertib diambil terhadap pelajar.
Students should adhere to the dress regulations in effect and must discipline themselves to avoid from
any disciplinary actions.
4. Pelajar perlu mematuhi peraturan keselamatan sepanjang aktiviti pembelajaran dan pengajaran.
Students should adhere to the safety regulations throughout the learning and teaching activities.
Fakulti (Faculty) : FACULTY OF ENGINEERING TECHNOLOGY Matrik ini perlu digunakan bersama:
(This matrix is to be used with)
Program (Programme) : 3 BNG 1. Objektif Pendidikan Program (PEO)
(Programme Educational Objectives (PEO))
Kod Kursus (Course Code) : BNG 20203 2. Hasil Pembelajaran Program (PLO)
(Programme Learning Outcomes (PLO))
Nama Kursus (Course Title) : AUTOMOTIVE ELECTRIC & ELECTRONICS SYSTEM
PLO10
PLO12
PLO13
PLO11
PLO1
PLO2
PLO3
PLO4
PLO5
PLO6
PLO7
PLO8
PLO9
Penyampaian KPI
(No.) (Course Learning Outcomes) (Method of
(Method of Delivery)
Assessment)
1 Distinguish briefly the principle Lecture and Test & Final
and function electrical & Tutorial Examination 50%
C4
electronics of automotive students
system. achieved
2 Display practical skill in Laboratory Work Laboratory Report marks 55%
electrical & electronics of P4 and above
automotive system.
3 Demonstrate good working Assignment Assignments
A3
relation with team members.
Jumlah (Total) 1 1 1