Documente Academic
Documente Profesional
Documente Cultură
no.
HISAKA WORKS, LTD. Heat Exchanger Div.
http://www.hisaka.co.jp/English/phe/ AHTS PSV FPSO Drill
Ship
Semi-
sub
Overseas Operation: 2-1-48, Higashi-konoike-cho, Higashi-Osaka City, Osaka, 578-0973, Japan
Tel : +81-72-966-9601/ Fax : +81-72-966-8923 / E-mail : phe@hisaka.co.jp
The world largest class, SUPER JUMBO size plate with 600mm Dia. Port hole
Product HISAKA SUPPER JUMBO PHEs have 1.5 times larger capacity than HISAKA
The heat transfer plates are thin sheets of corrosion resistant metals such as JUMBO size PHEs.
stainless steel or titanium and etc. that are press-formed with a corrugated pattern SUPER JUMBO PHEs bring you great advantages in cost and work time saving
on their surfaces, and sealed with synthetic rubber gaskets in their groove, which HISAKA SUPER JUMBO PHEs assist less installation space and works,
seal the flow channel and direct the fluid into alternate channels. maintenance works and initial cost saving for the equipment itself as piping, pumps,
Such plates are suspended, supported and aligned by guide bars, and tightened valves and instruments.
by bolts and nuts between fixed and movable frame.
M a r i ne A ux i l i a r y M a c hi ne r y
The equipped can adjust the number of plates so as to meet the heat duty. Remarkable features
Max, heat transfer area up to 4,300 /unit
Largest connection size 600mm handles up to 7,300 /h flow rate
Thin plate thickness due to high pressure resistance pattern
Space saving
Reducing number of installation units, and space saving about 40%
Cut down on
installation area
40%Down
HISAKA SUPER JUMBO HISAKA JUMBO Cost saving of Purchase cost saving of piping, Cost and time saving of
Transportation / handling pumps, valves, instruments, etc maintenance work
to the site
39
Features
Less Installation Space
The lightweight and compact
construction saves the installation
space to 1/6 and the weight to 1/3
of shell & tube heat exchanger
respectively.
In addition, lightweight and thin
heating plate with less liquid hold-
up volume facilitates the installation
work. The Plate Heat Exchanger can
M ar i n e A ux i l i a r y M a c hi ne r y
be disassembled for cleaning without
piping work, while the shell & tube
type needs an additional space for
drawing out the tube bundle.
Easy Maintenance
The plate heat exchanger can
be easily opened for inspection
and maintenance by loosening the
tightening bolts and nuts.
Assembly and opening of the unit
are also easily preformed.
High Performance
The overall heat transfer co-
efficient (U-value) ranges from 4,000
to 9,000 W/m3C in water application,
Quick Start-up
since the plate corrugation provides
Less liquid hold-up volume makes
high turbulent flow. This is one of the
quick response for start-up of the
reasons why plate heat exchanger
process, and changes operating
performs so high heat transfer
conditions.
coefficient. In addition, this turbulent
Assembly and opening of the unit
flow also acts to prevent scales from
are also easily preformed.
the plate surface.
40
Japanese Marine Equipment Supporting for OFFSHORE
41
HISAKA KOREA CO., LTD.Busan Branch [Taiwan]
4th Floor, LCG-17, 32, Centerm 3-ro, Haeundae-gu, Busan 48060, South Horng Miin Enterprise Co., Ltd.
Korea 7th Fl., No.156, Sec.3, Pa-teh Road, Taipei, Taiwan R.O.C.
TEL:+82-51-747-0265FAX:+82-51-747-0266 TEL:+886-22-577-8461FAX:+886-22-577-3502
Sales / Services Agents and/or Business Partners Goang Pyng Fuh Enterprise Co., Ltd.
7th Fl., No.143, Sec.3, Ho-Ping East Road, Taipei, Taiwan R.O.C.
Asian Region TEL:+886-22-737-4677 FAX:+886-22-737-8341
[Korea]
Samryung Company Inc. SHIP-TECH TRADING CO.,LTD
Yoksam Height Bldg., 642-19, Yoksam-dong, Gangnam-Gu, Seoul Korea Room no.6012 6F., No.53, Sec. 2, Nanjing E. Rd., Zhongshan Dist.
TEL:+82-2-568-7515FAX:+82-2-568-7518 Taipei City 10457 Taiwan R.O.C.
TEL:+886-(0)2-2562-6363FAX:+886-(0)937-067-394
M ar i n e A ux i l i a r y M a c hi ne r y
GS Corporation
103, Hwajeong-Dong, Deogyang-Gu, Goyang-Si, Gyeonggi-Do, Korea [Hong Kong]
TEL:+82-31-938-3636FAX:+82-31-938-3640 Extensive Trading Co., Ltd.
8th Fl., Chaiwan Ind. Centre Bldg., 20, Lee Hung St., Chaiwan,
Sosung TS Co., Ltd. Hong Kong R.O.C.
2nd Fl. Seongsoo Bldg. 684-10, Gongneung-dong, Nowon-Gu, Seoul 139-240 TEL:+852-2-889-1681FAX:+852-2-556-6029
Korea
TEL:+82-2-978-9933FAX:+82-2-978-9934 [P.R.China]
Beijing DICS Consulting Co., Ltd.
Doil Corporation. 1601, 5th Building Wanda Plaza, No.93 Jianguo Road Chao Yang District,
Room 607, E& C Venture Dream Tower 6th, 167-28, Guro-dong, Guro-Gu Beijing, China
Seoul, 152-719 Korea TEL:+86-10-5960-4871FAX:+86-10-5960-4870
TEL:+82-2-801-0133FAX:+82-2-801-0139
[HISAKA PHE A/S authorized company inside Korea; CLEANPIA Corp.] [India]
Rm. 171-8, Sangdaewon-Dong, Jungwon-Gu, Seongnam-Si, Gyeonggi-Do R3 Engineers Associates
462-807, Korea 5-4-3/7, Kamalanagar, Vanasthalipuram, Hyderabad 500070 INDIA
TEL:+82-1600-5335 TEL:+91-40-24020005
42
Japanese Marine Equipment Supporting for OFFSHORE
43
[Germany]
Mitsui & Co. Deutchland GmbH Record
Konigsalee 63-65, 40215 Duesseldorf, Germany As a pioneer of Jumbo Plate Heat Exchangers, HISAKA has been supplying to
TEL:+49-211-93 86-0FAX:+49-211-93 86-268 onshore or offshore plants for over 40 years since 1970s.
Now over 2000 of HISAKA Jumbos are working all over the world.
Turbo-Technik GmbH & Co. KG
Hannouversche Strasse 11, D-26384 Wilhelmshaven, Germany
TEL:+49-4421-30780FAX:+49-4421-305086
E-mail:info@turbotechnik.com
URL: http://www.turbotechnik.com/
M ar i n e A ux i l i a r y M a c hi ne r y
[Greece]
SEA POWER LIMITED.
7, Saki Karagiorga Str. 16675 Glyfada, Greece
TEL:+30-210-8920928FAX:+30-210-8920918
E-mail:seapower@sph.gr
[Malta]
Med Diesel Parts Ltd.
The Hub, Suite W205, Triq San Andrija SGN 1612, Malta
TEL:+356-276-627-66
E-mail:info@thehubmalta.com
URL: http://www.thehubmalta.com/project/med-diesel-parts-ltd/
[South Africa]
Kemplant Pty Limited
5&7 Polo Crescent, Woodmead Park, Van Reenen Ave., Woodmead,
Sandton 2146, South Africa
TEL:+27-11-804-1560FAX:+27-11-804-1568
Certifications/Applicable rules
ISO ISO ASME U STAMP
9001 14001 (ASME Boiler and Pressure Vessel Code, Section, Division1.) NK
44