Sunteți pe pagina 1din 1

This document is exclusive MARECO LUCE s.r.l.

, is strictly prohibited disclosure or reproduction, even partial, as well the use of without written consent of MARECO LUCE s.r.l..The company reserves the right to change models,
dimensions and materials at any time without notice.

PRODUCT DATA SHEET


Wix Led
Code : 1056191M
PRODUCT FAMILY
Led outdoor residential with base for plinth/ floor installation (IP55).

MATERIAL CHARACTERISTICS
Cover and base in die-cast aluminium EN AB 46100 highly castable and flowable to prevent
formation of air bubbles and allow the filling of castings with thin walls, treated by cleaning,
degreasing, brushing, and anodising.
Body in extruded aluminium EN AW 6060 with T5 thermal treatment (hardness Brinnel 55-
80HB).
Then phosphating with zinc salts followed by passivation with demineralised water and oven
drying at 110C
Thermosetting powder coating (based on carboxylated saturated polyester resins specifically
selected for their high resistance to weathering) (hardener without TGIC) having pigments with
high stability to light and heat Thermo-polymerization at 200C
Diffuser in thick transparent PMMA, or in Polycarbonate.
Reflector cone in PC, moulded white
Highly vandal resistant because of the qualities of the material used in the fittings construction
Colour: Metallic Grey, Black, White
Gaskets in silicone
Screws in stainless steel A2

LIGHTING CHARACTERISTICS
Circular light throw.
The position of the LEDs, under the upper part of the body, combined with the deflector white
cone directs a high percentage of light towards the ground, helping to create a pleasing light 230V 50Hz 17W
effect
IP55

WIRING CHARACTERISTICS
1 monochromatic Led module SEOUL neutral white (NW) 4000K, 1660 lm or warm white (WW)
3000K, 1590 lm
Supply tension 220-240V 50-60Hz
Lamp is in a fixed position.

INSTALLATION AND ORDINARY MAINTENANCE CHARACTERISTICS


Fitting for plinth/ floor installation, fixed with expansion caps (NOT SUPPLIED) and compartment
in base for terminal and excess cable
Ordinary maintenance unnecessary for LED

MEASUREMENT CHARACTERISTICS
Fixture with diameter 200mm, base diameter 254mm, and a height of 1000mm.

Rev. 01-16/09/2014

Details
Conformity with CEE directives
Double insulation/class II
Mounting on normal flammable surface
Resistant to atmospheric agents
Shock-proof
Inalterable to ultraviolet radiations
IP 55

S-ar putea să vă placă și