Documente Academic
Documente Profesional
Documente Cultură
TJC 6
Indoor voltage transformers
Parameters Units
The transformer can be mounted in any position. The trans- The transformers are manufactured conformably to the re-
formers are fixed by four screws, the M8 bolted earthing quirements and recommendations of the following standards
clamp is located on the transformer base plate. The second- and regulations: IEC, VDE, ANSI, BS, GOST and CSN.
ary terminal board is covered with a transparent and sealable
cover made of plastic material.
282
Pg16 14
M8
39
22
20
4
352
10 275 12
132 143
14
150
178
96
30 14
Drawing n.
Marking of the voltage transformer
44203580 outlets
a) b) c) d)
e) f) g)
a) Single-pole insulated transformer | b) Single-pole insulated transformer with a tap | c) Double-pole insulated transformer | d) Double-pole insulated
transformer with a tap | e) Single-pole insulated transformer with two secondary windings | f) Single-pole insulated transformer with two secondary win-
dings, with one of which being the auxiliary (residual) winding | g) Single-pole insulated transformer with two secondary, tapped windings, with one which
being the auxiliary (residual) winding.
ABB s.r.o.
www.abb.com
The data and illustrations are not binding. We reserve the right to
make changes without notice in the course of technical develop-
ment of the product.