Documente Academic
Documente Profesional
Documente Cultură
Engineered Simplicity
The pumping action results from alternately compressing
and relaxing a machined hose element between the
pump housing and the compressing shoes. The fluid
ahead of the shoe is pushed towards the discharge while
the rebounding hose behind the shoe draws more fluid
in. With 100% compression at all times, the pump does
not slip, providing unbeatable metering accuracy and
pressure performance. With no pump seals, seats or
valves, abrasive slurries are no problem. With the fluid
contacting only the inner wall of the hose, the pump is
perfect for aggressive chemicals.
to wear, clog, or leak.
The fastest growing pump type SPX - The apex of pump evolution
High maintenance diaphragm, rotary lobe, or progressive With over 50 years experience, Watson-Marlow Bredel
cavity pumps cant match the rugged, reliable 24/7 leads the way in hose pump technology, engineering the
dependability of the SPX which: new standard for hose pumping with its unique SPX
direct-coupled design. The SPX combines the small
Doesnt require expensive ancillary equipment. No footprint of close-coupled pumps with the reliability and
check valves, sealing water flush systems, or run dry
ease of maintenance of long-coupled designs.
protection. Its simple to own and operate
While close-coupled pumps are extremely compact, this
Pumps abrasive slurries, corrosive acids, gaseous
liquids, as easily as water - no vapor locking out-of-date technology still used by other hose pump
manufacturers relies on the gearbox to seal the pump
Is ideal for high viscosity or shear sensitive product housing and support the heavy overhung load of the
Can run dry indefinitely without damage pump rotor. While close-coupled pump competitors offer
optional long-coupled pumps to improve gearbox and
Has one wetted component - the hose element. No bearing life this comes at the cost of substantially
seals, ball-checks, diaphragms, glands, immersed
increased footprint and the added complexity of coupling
rotors, stators or pistons to leak, clog, corrode and
alignment and maintenance.
replace
The SPX direct-coupled design contains heavy duty rotor
Is fully reversible to blow out clogged suction and
drain lines safely bearings within the pump rotor, eliminating any overhung
load. Ultra compact SPX high-torque planetary gearing
Has a suction lift capability up to 30 feet and is self- then aligns directly to the pump housing and is fully
priming
protected by an innovative buffer zone. No other pump
Does not slip, giving true positive displacement for achieves the reliability, simplicity, and compactness of the
accurate and repeatable metering SPX hose pump.
Downtime is money
Save both with the SPX by reducing your maintenance.
To completely rebuild an SPX all you need is a wrench, a
hose, and a few minutes. Drain the lubricant, unbolt the
flanges, replace the old hose and youre back up and
running. No complex parts lists, no special tools, and no
need to bring the pump to a maintenance shop.
Ease of maintenance
Protected gearbox -
lubricant seal in pumphead SPX direct-coupled
Reliability -
bearings in pumphead
Compact footprint
Faster installation -
no drive alignment
Total 3 2 5
Long-coupled Close-coupled
The hose is the key
Hose Construction
3
The essential component of high-performance 4
hose pumps is a hose that is constructed of
layers of rubber reinforced by winding several
layers of nylon cords. The inner and outer layers
are extruded. The inner layer is available in a
range of rubber compounds. After the hose is
1 Inner layer in various types of rubber
constructed, it is then machined. Machining is
the final step in hose manufacture and is critical 2 Reinforced with layers of nylon
to insure that exact tolerances are held. 3 Outer layer precision-machined
4 Rough outer surface before machining
Designed to perfection
Watson-Marlow Bredel is on the cutting edge of technology
to engineer, manufacture and test our pumps.
Design: Using tools like finite element analysis (FEA), we At our research and design lab, pumps are running non-stop
every day to enhance the performance of the best hose pumps
design our hose elements to perfection - right down to the on the market today, and develop new innovations for the future.
position of the reinforcing layers, angles and thickness of the
cord reinforcement, and the thickness of the rubber.
Everything from the geometry of the pressing shoe to the
pump housing is engineered to optimize the performance of Precision hose elements ensure
the hose element.
Tight tolerances for low stress on bearings
Production: Unique in the world, Watson-Marlow Bredels Perfect compression for long life
state-of-the-art automated hose grinding facility machines
every hose within fine tolerances - guaranteeing proper Excellent suction performance - 30 ft. Suction lift
compression for efficiency and longevity. At our High pressure capability - 232 psi
ISO9001.2000 factory, each pump and hose element is
constructed to the most rigorous quality controls standards. Repeatable volumetric accuracy to +/- 1%
Consistent capacity independent of varying suction
and discharge conditions
Hose Options
Performance 1
2
Flow required indicates
pump speed
Calculated discharge pressure
5
6
Calculated discharge
pressure
Maximum recommended
3 Net motor power required pump speed
4 Product temperature
SPX10 0.20
Intermittent duty Product
i
Max flow: 0.6 gpm 0.175 ps
i ps Temperature
i
ps
0
.5
43
9
C (F)
10
Capacity: 0.0058 gal/rev 0.15 40 (104)
Continuous duty
Max discharge pressure: 110 psi NET
0.125
50 (122)
5 4
hp
0.10
Max temperature: 175F 3
60 (140)
2
0.075
Hose diameter: 10 mm 70 (158)
0.05
Port size: 1 2" male NPT or 150# flange 80 (176)
0.025
Hose lube required: 0.06 gallons 1 6
rev./min. 15 30 45 60 75 90 105 120
Starting torque: 250 in lbs
gal./min. 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7
SPX15
Product
Max flow: 2.3 gpm Intermittent duty Temperature
si
i
si
ps
0.40 p
9p
0 C (F)
.5
Capacity: 0.022 gal/rev
10
43
40 (104)
Continuous duty
Max discharge pressure: 110 psi NET 0.30 5 50 (122)
hp 4
0.25
Max temperature: 175F 2 60 (140)
0.20
3
Hose diameter: 15 mm 70 (158)
i
ps
9 72
10
2p
1.5 Capacity: 0.079 gal/rev
5
C (F)
14
23
40 (104)
NET
1.25
Continuous duty Max discharge pressure: 232 psi
hp 50 (122)
1.0 5 4 60 (140)
Max temperature: 175F
0.75
2
3 70 (158) Hose diameter: 25 mm
0.5 80 (176)
Port size: 1" 150# flange
0.25
1 6
Hose lube required: 0.53 gallons
rev./min. 20 40 60 80 100 120 140 160
Starting torque: 1600 in lbs
gal./min. 0 1 2 3 4 5 6 7 8 9 10 11 12
SPX32
3.0 Max flow: 20 gpm
si
i
i ps
2p
Intermittent duty ps 9
10 i
23
2.5 14
5
.5
ps Product Capacity: 0.165 gal/rev
72 Temperature
NET 2.0
C (F) Max discharge pressure: 232 psi
hp 40 (104)
Continuous duty 50 (122)
Max temperature: 175F
1.5
5 4
60 (140)
Hose diameter: 32 mm
1.0 3 2
70 (158)
80 (176)
Port size: 11 2" 150# flange
0.5
1
Hose lube required: 0.8 gallons
6
rev./min. 20 40 60 80 100 120 140
Starting torque: 3000 in lbs
gal./min. 0 2 4 6 8 10 12 14 16 18 20 22
Performance 1
2
Flow required indicates
pump speed
Calculated discharge pressure
5
6
Calculated discharge
pressure
Maximum recommended
3 Net motor power required pump speed
4 Product temperature
SPX40 4.0
i
si
ps
3.0 .5
2p
9 2
10
5
7 C (F)
14
23
Max discharge pressure: 232 psi NET 40 (104)
hp Continuous duty
Max temperature: 175F 2.0 5
50 (122)
4 60 (140)
2
Hose diameter: 40 mm 3 70 (158)
SPX50
9.0
i
si
ps
ps
2p
9 .5 Product
10
5
72
14
Capacity: 0.766 gal/rev Intermittent duty
23
7.0 Temperature
i
ps
si
i
12.5
Intermittent duty
2p
09 ps Product
5
1 .5
14 72 Temperature Capacity: 1.77 gal/rev
23
10.0 C (F)
NET Continuous duty 40 (104) Max discharge pressure: 232 psi
hp
50 (122)
7.5
5 4
Max temperature: 175F
60 (140)
3 2
5.0 Hose diameter: 65 mm
70 (158)
1 6
Hose lube required: 5.3 gallons
rev./min. 10 20 30 40 50 60 70 80
Starting torque: 12,000 in lbs
gal./min. 0 20 40 60 80 100 120 140
SPX80
17.5
Product
Intermittent duty i i Temperature Max flow: 155 gpm
si
ps s
ps
5p
2p
15.0 9 .
5
10 72
14
23
Performance 1
2
Flow required indicates
pump speed
Calculated discharge pressure
5
6
Calculated discharge
pressure
Maximum recommended
3 Net motor power required pump speed
4 Product temperature
SPX100
22.5
Intermittent duty i Product
Max flow: 232 gpm ps
i
ps
ps
si
20.0 5 Temperature
2p
.
9
5
72
10
14
23
C (F)
Capacity: 5.28 gal/rev 17.5
40 (104)
15.0
Continuous duty
Max discharge pressure: 232 psi NET
5 4 50 (122)
hp 12.5
3 2 60 (140)
Max temperature: 175F 10.0
70 (158)
Hose diameter: 100 mm 7.5
80 (176)
5.0
Port size: 4" 150# flange
2.5
Hose lube required: 15.8 gallons 1 6
rev./min. 5 10 15 20 25 30 35 40 45 50
Starting torque: 40,000 in lbs
gal./min. 0 50 100 150 200 250
Duplex SPX100
43
Intermittent duty i Product
Max flow: 400 gpm ps
i
ps
ps
si
40 5 Temperature
2p
.
9
5
72
10
14
Capacity: 10.56 gal/rev 35 23 C (F)
40 (104)
30
Continuous duty
5
Max discharge pressure: 232 psi NET
4 50 (122)
hp 25
3 2 60 (140)
Max temperature: 175F 20
70 (158)
Hose diameter: 100 mm 15
80 (176)
10
Port size: 6" 150# flanged manifold
5
Hose lube required: 31.6 gallons 1 6
rev./min. 5 10 15 20 25 30 35 40 45 50
Starting torque: 80,000 in lbs
gal./min. 0 100 200 300 400 500
Approx.
Model A B C D E F G* H I Wt. (lbs)
SPX10 13.50 6.73 4.56 2.44 3.07 9.45 24.79 4.72 8.86 75 SPX10 SPX15
SPX15 17.09 9.06 7.68 2.48 3.23 9.84 25.97 6.30 11.97 105
Approx.
Model A B C D E F G* H I J K Wt. (lbs)
SPX40 19.3 16.2 27.7 0.1 16.9 17.7 31.12 12.8 24.2 4.3 2.9 400 SPX40 SPX100
SPX50 24.4 18.7 33.0 0.1 21.8 22.7 35.4 16.5 31.8 5.6 3.3 700
SPX65 26.8 22.8 41.7 0.1 29.4 25.6 35.8 20.7 40.8 6.0 4.1 1123
SPX80 35.4 27.6 49.4 0.2 34.5 33.5 49.56 24.4 47.9 7.2 4.9 1875
SPX100 41.3 32.1 57.9 0.2 41.0 35.5 52.36 28.3 55.7 7.8 5.9 2900
Pump Series Flow Rates Put a peristaltic in your process Improve your performance
101U
Single channel, 1l/min - 50ml/min
100 low flow pumps.
Fixed or variable speed.
LISTED
205U
Near pulseless, 0.5l/min - 21ml/min
200 multi-channel pumps
with up to 32 channels.
323U