Documente Academic
Documente Profesional
Documente Cultură
Contents
RF Full Pallet Pick + Pickwave Replenishment............................................................................2
Full Pallet Picking........................................................................................................................ 3
RF Pickbin Pick............................................................................................................................ 5
Error Handling............................................................................................................................ 8
SCAH RF Outbound
RF Function TA Lite : http://wiki.int.kn/display/corporateCL/Task+Allocation+Lite
Picking: RDTALCFUL (Full Pallet Picking) + Pickwave Replenishment
Picking: RDTALCPCK (Pickbin Pick)
RF Operator Process
To fully Complete this RF Outbound Process, user must make
sure that Full Pallet Picking and Pickbin Picking must be
completed. From the screen on the right, it is Option 10 and
Option 20 below.
Definition of Full Pallet Picking divided into 2:
1. Full pallet means the whole pallet. It can be a full pallet, it
can be half a pallet, it can be just 1 carton. As long as it is
sitting on a pallet under one Case Number no matter
what quantity it has. The idea is when Full Pallet Picking
is performed, user should bring the whole pallet to
Outbound area, user DO NOT do loose picking for this
activity at all.
2. Replenishment the whole Full pallet to Pickbin location. Sometimes the instruction is
to bring the whole pallet to Pickbin location instead of Outbound area, this is for
Replenishment of Pickbin.
If the next Outbound Order of the same part has quantity of just 20pcs. System will
create only Pickbin Pick task for the user. No Full Pallet Pick. If user try to go Option
10 for Full Pallet Pick, it will mention as No Task Found. User will just need to
complete the order by using Pickbin Pick.
If the next Outbound Order of the same part has quantity of 200 pcs. Again this will be
completed just by doing Full Pallet Picking because it match with Full Pallet Quantity
therefore System will ask to pick from Full Pallet Location.
Warning: If there is not enough Pickbin Location, system will no longer send Full Pallet
Pick to Pickbin Location, instead it will ask user to Pick Loose from Full Pallet Location.
4. Scan / Enter Pickwave Number usually found on printed Picklist / Checklist. This
represents which Order to be processed for RF Picking.
5. Once Pickwave number is entered, system will find a Full Pallet Picking task that is
available. Here you might have 2 scenarios, one is full pallet picking for outbound,
another one is full pallet picking for Replenishment.
6. For Full Pallet Picking for Outbound, system will direct user to a location to pick the
whole pallet. Scan the Pallet ID to confirm you have picked the right Case ID. Follow by
Put down at Outbound area. In this case PAC.
7. For Full Pallet Picking for Replenishment, system will direct user to a location to pick the
whole pallet. Scan the Pallet ID to confirm you have picked the right Case ID. Follow by
Put down at Pickbin Location.
8. Once all Full Pallet Pickings tasks are completed. You will see a screen with a message
No Task Found. End.
SCAH_Outound_Full Pallet Picking Pickwave Replenishment Pickbin Picking_v1.docx
Document Owner: SIN ZL-I Tommy Halim
Page 5 of 10
RF Pickbin Pick
1. Login to RF
2. From RF Main Menu, select 20 Outbound
4. Scan / Enter Pickwave Number usually found on printed Picklist / Checklist. This
represents which Order to be processed for RF Picking. Enter the same Pickwave
Number.
5. Scan Pick Pallet, this represent assigning a palled id to the empty pallet you will be
using to pick loose items.
Usually you could scan the same Pickwave Number like above or Scan Pre-printed label
assigned to you. Hit Enter.
NB: Pickpallet is a Case Number, any setup to validate Case Number will apply here as
well. In below example, the setup is to have 14 chars starting with Prefix OUT.
6. Go to mentioned and Scan the barcode on physical location. The system will ask to pick
from a location where you have done a replenishment earlier. Scan the location to
validate it.
8. Pick the quantity mentioned and Enter the quantity on the RF scanner.
11.Once done, the screen will back to Scan Pickwave screen ready for the next order.
Error Handling
Article not found during Picking, Article is not valid for the orders.
Temperature control