Documente Academic
Documente Profesional
Documente Cultură
Speaker Microphone
Micro USB port
Getting started
Follow the instructions in the following figures to set up your phone.
Do not insert or remove a SIM card when your phone is turned on.
Please exercise caution when using the SIM ejector pin to avoid
hurting your fingers or damaging your phone. Store your pin in
a safe place out of the reach of children to prevent them from
swallowing it or injuring themselves by accident.
The upper card slot may not support nano-SIM cards. If it does
not, you can insert only a microSD card into it.
Locking and unlocking the screen
Press the power button to lock the screen. If your phone is idle for a
specified period of time, the screen will automatically lock itself.
If the screen is off, press the power button to turn it on. Slide your
finger in any direction to unlock the screen.
Calling and messaging
Touch to make a call using Touch to send a text or
the dialer. You can also touch a multimedia message. You can
phone number in your contacts, save photos, audio clips, videos,
or a number in a message, email, and other attachments from
web page, or other screen to received multimedia messages.
place a call.
Camera
Touch . Swipe left or right to switch
Frame the scene you want to between different capture modes.
capture. Let your camera focus
automatically or touch the screen
to focus on a specific object. Then
touch to take a photo.
Internet connection
You can access the Internet over Touch to turn on mobile data.
Wi-Fi or a mobile data network.
Touch and hold to go to the
Swipe down from the status bar
Wi-Fi settings screen. Turn on Wi-
to open the notification panel.
Fi and connect to a Wi-Fi network.
Turn off mobile data when
you don't need it to reduce
your mobile data usage.
Phone manager
Touch . Touch the options on the screen
You can quickly scan your phone to clear system trash, set the
for potential risks with one touch. harassment filter, activate power
Follow the onscreen instructions saving mode, manage your
to use one-touch optimization, or applications' notification
manually clean the system storage permissions, and more.
and manage your applications.
Legal Notice Trademarks and Permissions
Unplug the charger from electrical outlets and the device when Ensure that the charger meets the requirements of Clause 2.5 in
not in use. IEC60950-1/EN60950-1/UL60950-1 and has been tested and
approved according to national or local standards.
Do not drop or cause an impact to the charger.
Connect the device only to products with the USB-IF logo or with
If the power cable is damaged (for example, the cord is exposed
USB-IF compliance program completion.
or broken), or the plug loosens, stop using it at once. Continued
use may lead to electric shocks, short circuits, or fire.
Do not touch the power cord with wet hands or pull the power
cord to disconnect the charger.
Battery safety your skins or splashes into your eyes, immediately flush with
clean water and consult a doctor.
Do not connect battery poles with conductors, such as keys,
jewelry, or other metal materials. Doing so may short-circuit the In case of battery deformation, color change, or overheating
battery and cause injuries or burns. while charging or storing, immediately stop using the device and
remove the battery. Continued use may lead to battery leakage,
Keep the battery away from excessive heat and direct sunlight. Do
not place it on or in heating devices, such as microwave ovens, fire, or explosion.
stoves, or radiators. Batteries may explode if overheated. Do not put batteries in fire as they may explode. Damaged
batteries may also explode.
Do not attempt to modify or remanufacture the battery, insert
foreign objects into it, or immerse or expose it to water or other Dispose of used batteries in accordance with local regulations.
liquids. Doing so may lead to fire, explosion, or other hazards. Improper battery use may lead to fire, explosion, or other
If the battery leaks, ensure that the electrolyte does not make hazards.
direct contact with your skins or eyes. If the electrolyte touches Do not allow children or pets to bite or suck the battery. Doing so
may result in damage or explosion.
Do not smash or pierce the battery, or expose it to high external Do not expose your device or accessories to extreme heat or cold.
pressure. Doing so may lead to a short circuit or overheating. These environments may interfere with proper function and may
lead to fire or explosion.
Do not drop the device or battery. If the device or battery is
dropped, especially on a hard surface, it may be damaged. Avoid collision, which may lead to device malfunctions,
overheating, fire, or explosion.
If the device standby time shortens significantly, replace the
battery. Before you clean or maintain the device, stop using it, stop all
applications, and disconnect all cables connected to it.
The device has a built-in, non-removable battery. Do not attempt
to remove the battery, otherwise the device may be damaged. To Do not use any chemical detergent, powder, or other chemical
replace the battery, take the device to an authorized service agents (such as alcohol and benzene) to clean the device or
center. accessories. These substances may cause damage to parts or
present a fire hazard. Use a clean, soft, and dry cloth to clean the
Cleaning and maintenance
device and accessories.
Keep the device and accessories dry. Do not attempt to dry it with
an external heat source, such as a microwave oven or hair dryer.
Do not place magnetic stripe cards, such as credit cards and rely solely on your device for critical communications like medical
phone cards, near the device for extended periods of time. emergencies.
Otherwise the magnetic stripe cards may be damaged. Disposal and recycling information
Do not dismantle or remanufacture the device and its accessories.
This voids the warranty and releases the manufacturer from
liability for damage. In case of damage, contact an authorized
service center for assistance or repair. This symbol (with or without a solid bar) on the device,
If the device screen is broken in a collision, immediately stop using batteries (if included), and/or the packaging, indicates that the
the device. Do not touch or attempt to remove the broken parts. device and its electrical accessories (for example, a headset, adapter,
Promptly contact an authorized service center. or cable) and batteries should not be disposed of as household
garbage. These items should not be disposed of as unsorted
Emergency calls
municipal waste and should be taken to a certified collection point
The availability of emergency calls is subject to your cellular network
for recycling or proper disposal.
quality, service provider policy, and local laws and regulations. Never
For more detailed information about device or battery recycling, and RoHS compliance, please visit the web site
contact your local city office, household waste disposal service, or http://consumer.huawei.com/certification.
retail store.
EU regulatory conformance
Disposal of the device and batteries (if included) is subject to WEEE
Body worn operation
Directive Recast (Directive 2012/19/EU) and Battery Directive
(Directive 2006/66/EC). The purpose of separating WEEE and The device complies with RF specifications when used near your ear
batteries from other waste is to minimize the potential or at a distance of 1.5 cm from your body. Ensure that the device
environmental impacts and human health risk of any hazardous accessories, such as a device case and device holster, are not
substances that may be present. composed of metal components. Keep the device away from your
body to meet the distance requirement.
Reduction of hazardous substances
Certification information (SAR)
This device is compliant with the REACH Regulation [Regulation (EC)
This device meets guidelines for exposure to radio waves.
No 1907/2006] and RoHS Directive Recast (Directive 2011/65/EU).
Your device is a low-power radio transmitter and receiver. As
Batteries (if included) are compliant with the Battery Directive
recommended by international guidelines, the device is designed not
(Directive 2006/66/EC). For up-to-date information about REACH
to exceed the limits for exposure to radio waves. These guidelines
were developed by the International Commission on Non-Ionizing The highest SAR value reported for this device type when tested at
Radiation Protection (ICNIRP), an independent scientific the ear is 0.390 W/kg, and when properly worn on the body is
organization, and include safety measures designed to ensure the 1.020 W/kg.
safety of all users, regardless of age and health. Statement
The Specific Absorption Rate (SAR) is the unit of measurement for Hereby, Huawei Technologies Co., Ltd. declares that this device is in
the amount of radio frequency energy absorbed by the body when compliance with the essential requirements and other relevant
using a device. The SAR value is determined at the highest certified provisions of Directive 1999/5/EC.
power level in laboratory conditions, but the actual SAR level during For the declaration of conformity, visit the web site
operation can be well below the value. This is because the device is
http://consumer.huawei.com/certification.
designed to use the minimum power required to reach the network.
The following marking is included in the product:
The SAR limit adopted by Europe is 2.0 W/kg averaged over 10
grams of tissue, and the highest SAR value for this device complies
with this limit.
This device may be operated in all member states of the EU.
Observe national and local regulations where the device is used.
This device may be restricted for use, depending on the local Certification information (SAR)
network. This device is also designed to meet the requirements for exposure
Restrictions in the 2.4 GHz band: to radio waves established by the Federal Communications
Norway: This subsection does not apply for the geographical area Commission (USA).
within a radius of 20 km from the centre of Ny-lesund. The SAR limit adopted by the USA is 1.6 W/kg averaged over one
gram of tissue. The highest SAR value reported to the FCC for this
FCC Regulatory Compliance
device type complies with this limit.
Body worn operation
The highest SAR value reported to the FCC for this device type when
The device complies with RF specifications when used near your ear using at the ear is 0.78 W/kg, and when properly worn on the body
or at a distance of 1.0 cm from your body. Ensure that the device is 0.65 W/kg, and when using the Wi-Fi hotspot function is
accessories, such as a device case and device holster, are not 0.70 W/Kg.
composed of metal components. Keep the device away from your
FCC statement
body to meet the distance requirement.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against --Consult the dealer or an experienced radio/TV technician for help.
harmful interference in a residential installation. This equipment This device complies with Part 15 of the FCC Rules. Operation is
generates, uses and can radiate radio frequency energy and, if not subject to the following two conditions: (1) this device may not
installed and used in accordance with the instructions, may cause cause harmful interference, and (2) this device must accept any
harmful interference to radio communications. However, there is no interference received, including interference that may cause
guarantee that interference will not occur in a particular installation. undesired operation.
If this equipment does cause harmful interference to radio or Caution: Any changes or modifications to this device not expressly
television reception, which can be determined by turning the approved by Huawei Technologies Co., Ltd. for compliance could
equipment off and on, the user is encouraged to try to correct the void the user's authority to operate the equipment.
interference by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver. All pictures and illustrations in this guide, including but not
--Connect the equipment into an outlet on a circuit different from limited to the phone color, size, and display content, are for your
that to which the receiver is connected. reference only. The actual product may vary. Nothing in this
guide constitutes a warranty of any kind, express or implied.
The N-Mark is a trademark or registered
trademark of NFC Forum, Inc. in the
United States and in other countries.