Sunteți pe pagina 1din 3

STABIFIX AFB

Fixing Agent

Stabifix is a fixing agent which improves the washing, water, rubbing and
perspiration fastness of dyeings on polyamides and its blends

PRODUCT FEATURES

Improves the wet and the rubbing fastness of dyeing on polyamides and
its blends with acid and 1:2 premetalized dyestuff
Process very affective when applied in the cooling down of the dyeing
bath thus leading to the reduction of the dyeing / after treatment cost
Has no negative influence on the light fastness and does not cause any
change of shades,due to our best experience
Steaming and fixation processes will not lead to any impare of the
fastness.
Very good resistance to acids and hardness builders
Poor in foaming

COMPOSITION

Condensation products of sulfonic acids

TYPICAL PROPERTIES

Appearance reddish brown


Consistency Liquid (viscous)
Ionic nature Anionic
PH value acidic(1:10)

APPLICATION

Operation Fastness improver


Substrate Polyamide and its blends
Aggregate Finishing machine
Dilution Predilute with warm water
Important Note Stabifix AFB must not get in contact with concentrated
acids.
Make sure that the pH of the bath is adjusted to 3.5 to 4.5 before stabifix
AFB is added.

Guide recipe Application in the dye bath


When dyeing is finished cool down the bath to 80C,add
2 4 % Stabifix AFB
and stay for 20 30 min at this temperature
Application as an after treatment
1 4 % Stabifix AFB
X% Acitic acid (pH 3.5 4.5)
20 min at 80 OC
Padding Application

3 6 g/l Stabifix AFB

Stripping of Stabifix AFB

2 g/l soda ash


1 g/l Arbyl 18 / 50
20 min at 95 OC

HANDLING AND STORAGE

Storage stability: At least 12 months. Thermally stable


Product solidifies at temperatures BELOW 0 (C).Change
reversible by heating and stirring
Further remarks: References to measure in case of accidents and fires as
well as further information about ecology, toxicology,
transport and storage are given in the separate Material
Safety Data Sheet.

The indications given herein correspond to practical experiences. Owing to the differences in local conditions they
cannot claim to be complete, so that any liabilities also with a view to claims of third parties are excluded.

Stabitex WF Page 2
Cognis Deutschland GmbH, Duesseldorf .

Stabitex WF Page 3

S-ar putea să vă placă și