Sunteți pe pagina 1din 3

STABITEX ETR

Wash & Wear Finish Agent

STABITEX ETR is applied for the wash- and wear finish with extremely low formaldehyde content, of
cellulose and its blends with synthetics. It meets the requirements as per Eco-Tex Standard 100.

PRODUCT FEATURES

Guaranteed extremely low formaldehyde content, < 75 PPM as per Japanese Law 112
Enables a distinct decrease of the limits as per MAK and TA air
Gives optimum wash- and wear effects
Improves the crease recovery
Imparts good residual shrinkage values
Shows excellent wash- and dry-cleaning resistant effects
Is suitable for the dry cross-linking as well as for the moist and wet cross-linking processes
Is suitable for the finishing of garments

COMPOSITION

Di-methylol-dihydroxy-ethylene urea, methylized, in water

TYPICAL PROPERTIES

Appearance Transparent, yellowish


Consistency Liquid
pH-value 4.0 5.5
Density (20 C) 1.2 g/cm3
Compatibility Can be combined with anionic, cationic and nonionic auxiliaries, pre-trials are
recommended.

APPLICATION

Operation Resin finishing


Substrate Woven and knit goods of cellulose and its blends with synthetics
Aggregate Padding machine
Dissolving method Direct dosage, a pre-dilution with water
Qty of application 30 100 g/l STABITEX ETR
Catalysts 20% magnesium chloride, calculated on STABITEX ETR, possible with the
addition of 0.5 g/l citric acid for viscose or 30 % STABITEX CAT
Drying 110 120 C
Curing 3 minutes at 150 C. Shock curing at 30 60 seconds at 180 170 C
Guide recipes

Crease resistant finish of viscose apparel fabric


30.0 - 40.0 g/l STABITEX ETR
20.0 - 30.0 g/l ADALIN K
20.0 - 30.0 g/l ADASIL ME
10.0 - 20.0 g/l BELSOFT 200
20.0 g/l magnesium chloride
1.0 g/l FORYL 100
pH-value : < 5.5
Application : dry/wet
Liquor pick-up : 100%
Drying : 110 C
Curing : 3 minutes at 150 C
Stain repellent finish of viscose lining
60.0 g/l STABITEX ETR
30.0 g/l DURASOL 5071
30.0 g/l REPELLAN KFC
20.0 g/l REPELLAN HY-N
30.0 g/l STABIFIX OF
12.0 g/l magnesium chloride
pH-value : < 5.5
Application : dry/wet
Liquor pick-up : 100%
Shock curing : 60 seconds at 170 C
Calandering
Note: Guide recipes for ;
1. Wet and moist cross-linking as well as for garment finishing
2. Wash- and wear finish of cotton poplin shirting
3. Wash-and-wear finish of polyester/cotton jersey and cotton-jersey printed
goods
4. Permanent chintz finish of polyester/cotton and cotton home furnishing
fabrics
can be obtained from our specialists on demand.

HANDLING AND STORAGE

Storage stability: At least 12 months under normal conditions.


Product change at temperatures BELOW 0 (C) possible. Change reversible
by heating and stirring
Storage and transport Storage and transport NOT UNDER 0C and NOT ABOVE +50C. Otherwise
product is no longer usable
Further remarks: References to measure in case of accidents and fires as well as further
information about ecology, toxicology, transport and storage are given in the
separate Material Safety Data Sheet.

355733628.doc Page 2
The indications given herein correspond to practical experiences. Owing to the differences in local conditions they
cannot claim to be complete, so that any liabilities also with a view to claims of third parties are excluded.
Cognis Deutschland GmbH, Duesseldorf.

355733628.doc Page 3

S-ar putea să vă placă și