Documente Academic
Documente Profesional
Documente Cultură
2
Italiano ....................................................................................................... 68
English ....................................................................................................... 133
V 1.13
SilverCrest SWV 300 B2
Contenido
Introduccin......................................................................... 4
Uso conforme a lo previsto .................................................. 4
Volumen de suministro ........................................................ 5
Visin general ..................................................................... 6
Indicadores LED ........................................................................................... 7
Datos tcnicos ...................................................................... 8
Indicaciones de seguridad ................................................... 8
Mantenimiento y limpieza ................................................. 13
Almacenamiento cuando no se utilice ................................ 14
Propiedad intelectual ........................................................ 14
Antes de poner en marcha el aparato ............................... 14
Puesta en funcionamiento ................................................. 16
Seleccin del modo ................................................................................... 16
Modo de repetidor .................................................................................... 16
WPS - La configuracin ms sencilla ..................................................... 18
Configuracin manual ............................................................................ 20
Modo de cliente ........................................................................................ 25
WPS - La configuracin ms sencilla ..................................................... 27
Configuracin manual ............................................................................ 28
Modo de punto de acceso ....................................................................... 34
WPS - Establecimiento de la conexin con un punto de acceso ........ 40
Establecimiento manual de la conexin con un punto de acceso ...... 41
2 - Espaol
SilverCrest SWV 300 B2
Men de configuracin del amplificador WiFi de banda dual ............. 41
Asistente ................................................................................................... 44
Informacin de la red inalmbrica ........................................................ 45
WiFi .......................................................................................................... 45
LAN .......................................................................................................... 56
Administracin ......................................................................................... 57
Estado ...................................................................................................... 62
Eliminacin e informacin medioambiental ....................... 63
Notas sobre la conformidad .............................................. 63
Solucin de problemas ...................................................... 64
Informacin sobre la garanta y el servicio tcnico ............ 66
Espaol - 3
SilverCrest SWV 300 B2
Introduccin
Muchas gracias por haber optado por uno de nuestros productos SilverCrest.
El amplificador WiFi de banda dual SilverCrest SWV 300 B2 permite ampliar
el alcance de una red WLAN existente. La funcin WPS integrada permite
conectarse cmodamente a una red WLAN con seguridad habilitada.
4 - Espaol
SilverCrest SWV 300 B2
Volumen de suministro
Espaol - 5
SilverCrest SWV 300 B2
Visin general
6 - Espaol
SilverCrest SWV 300 B2
Indicadores LED
Espaol - 7
SilverCrest SWV 300 B2
Datos tcnicos
Indicaciones de seguridad
Antes de utilizar el aparato por primera vez, lea detenidamente las siguientes
instrucciones, incluso si est familiarizado con el uso de aparatos electrnicos.
Guarde cuidadosamente estas instrucciones como referencia para el futuro. Si
entrega el aparato a otra persona, asegrese de darle tambin el presente
manual, puesto que forma parte del aparato.
ADVERTENCIA! Este smbolo seala informacin importante
para utilizar el aparato con seguridad y para la proteccin del
usuario. El incumplimiento puede provocar daos materiales y
riesgos para la salud, pudiendo incluso llegar a causar la muerte.
8 - Espaol
SilverCrest SWV 300 B2
Entorno de funcionamiento
Este aparato no se ha diseado para el uso en lugares con una temperatura o
una humedad ambiente elevadas (p.ej. cuartos de bao) ni en espacios
polvorientos. Temperatura y humedad ambiente de funcionamiento: de 5 C a
35 C, humedad relativa mx.: 85 %.
Mantenga el aparato siempre a una distancia mnima de 20 cm de su cuerpo
para evitar que le afecten las emisiones de radio.
Seguridad de funcionamiento
10 - Espaol
SilverCrest SWV 300 B2
llama que existe siempre que se conecta un aparato elctrico a la red
elctrica.
El amplificador WiFi de banda dual tambin debe desenchufarse de la red
elctrica en caso de mal tiempo o tormenta con rayos, puesto que la cada
de un rayo podra provocar una subida inadmisible de tensin y destruirlo.
Para separar el amplificador WiFi de banda dual completamente de la red,
es necesario desenchufar la clavija de red de la toma de corriente.
No utilice clavijas adaptadoras ni cables alargadores que estn daados o
que no cumplan las normas de seguridad en vigor.
Cables
Coja todos los cables siempre por la clavija y no tire del propio cable. No
coloque muebles ni otros objetos pesados sobre los cables y preste atencin a
que no se doblen, especialmente en la zona de la clavija y los zcalos de
conexin. No haga nunca un nudo con el cable ni tampoco lo ate a otros
cables. Coloque todos los cables de forma que nadie pueda pisarlos y que no
representen un obstculo.
Los aparatos elctricos no son para los nios. Asimismo, las personas con
discapacidades fsicas, intelectuales o sensoriales solo deben utilizarlos dentro
de sus posibilidades. No permita que los nios ni las personas discapacitadas
Espaol - 11
SilverCrest SWV 300 B2
utilicen aparatos elctricos sin vigilancia, salvo que hayan recibido una
instruccin adecuada o estn bajo la vigilancia de una persona responsable
de su seguridad. Debe vigilarse con especial atencin a los nios para
asegurarse de que no jueguen con el aparato. La ingestin de piezas
pequeas puede suponer peligro de muerte. Mantenga tambin los plsticos
de embalaje fuera de su alcance.
Interfaz inalmbrica
12 - Espaol
SilverCrest SWV 300 B2
Targa GmbH no se hace responsable de los problemas de transmisin y
visualizacin derivados de la modificacin del aparato sin autorizacin.
Asimismo, Targa tampoco asume ningn tipo de responsabilidad de
reemplazo o sustitucin de los cables y aparatos que no hayan sido
especificados por Targa GmbH. La reparacin de averas provocadas por una
modificacin no autorizada, as como el reemplazo o sustitucin de los
aparatos afectados, son responsabilidad exclusiva del usuario.
Mantenimiento y limpieza
Espaol - 13
SilverCrest SWV 300 B2
Propiedad intelectual
El contenido de este manual de instrucciones est protegido por la ley de
propiedad intelectual y se entrega al usuario nicamente como fuente de
informacin.
Quedan prohibidas la copia y la reproduccin de sus datos e informaciones
sin la autorizacin expresa y por escrito del autor. Esto rige tambin para el
uso comercial de su contenido y datos.
En el momento de pasar a impresin, el texto y las ilustraciones se
correspondan al nivel tcnico ms reciente.
14 - Espaol
SilverCrest SWV 300 B2
El amplificador WiFi de banda dual se encarga de amplificar su red WLAN
domstica. El modo de banda dual permite enviar y recibir simultneamente
seales WLAN de 2,4 GHz y 5 GHz, gracias a lo cual el amplificador WiFi
de banda dual puede utilizarse tanto en redes WLAN de 2,4 GHz como de
5 GHz. El amplificador WiFi de banda dual puede funcionar en los tres modos
que se indican a continuacin:
Repetidor
Este modo ampla el alcance de la red inalmbrica y la pone a disposicin de
las redes WLAN de 2,4 GHz y 5 GHz. De esta manera, los dispositivos
WLAN que se encuentran fuera del alcance de la red inalmbrica pueden
conectarse a ella a travs del amplificador WiFi de banda dual.
Cliente
Este modo permite conectar dispositivos con conexin LAN (como
ordenadores, porttiles o televisores) que no dispongan de una WLAN propia
al amplificador WiFi de banda dual utilizando un cable LAN (cable de red).
De esta manera, el dispositivo puede conectarse a la conexin inalmbrica de
un enrutador WLAN a travs del amplificador WiFi de banda dual.
Debido a que no es posible garantizar la compatibilidad con todos los
aparatos, le rogamos que consulte la documentacin del aparato.
Punto de acceso
Este modo puede utilizarse, por ejemplo, para convertir en un "enrutador
WLAN" un enrutador que no disponga de una WLAN propia. Para ello, el
enrutador debe conectarse al amplificador WiFi de banda dual mediante un
cable LAN (cable de red, vase el volumen de suministro).
Espaol - 15
SilverCrest SWV 300 B2
Puesta en funcionamiento
Modo de repetidor
El modo de repetidor permite ampliar el alcance de la red inalmbrica. De
esta manera, los dispositivos WLAN que se encuentran fuera del alcance de la
red inalmbrica pueden conectarse a ella a travs del amplificador WiFi de
banda dual.
16 - Espaol
SilverCrest SWV 300 B2
La primera vez que se ponga en marcha, el amplificador WiFi
de banda dual debe colocarse al lado del enrutador WLAN
(entre 2 y 3 metros de distancia).
Espaol - 19
SilverCrest SWV 300 B2
Configuracin manual
El amplificador WiFi de banda dual se puede configurar de dos maneras
diferentes.
Si no utiliza la configuracin de red predeterminada y ha
configurado la direccin IP manualmente, la configuracin de
red se deber cambiar de nuevo a Obtener una direccin
IP automticamente. Consulte la documentacin del
ordenador.
Si el amplificador WiFi de banda dual se haba utilizado
previamente en otra red, es posible que ya no sea accesible a
travs de la direccin predeterminada. En este caso, se deber
restablecer la configuracin del amplificador WiFi de banda
dual. Consulte el segundo punto "No se abre el men de
configuracin del amplificador WiFi de banda dual" del
captulo "Solucin de problemas".
20 - Espaol
SilverCrest SWV 300 B2
WiFi-Repeater(5G). A continuacin, seleccione la red WiFi-
Repeater(2.4G) o la red WiFi-Repeater(5G) y haga clic en el
botn Conectar para conectarse de forma inalmbrica al amplificador
WiFi de banda dual. En caso necesario, despus de pulsar el botn
Conectar, haga clic en la opcin Conectar sin configurar la red.
Acto seguido, abra el navegador de internet del ordenador. En la barra de
direccin del navegador, introduzca http://192.168.10.1 y luego pulse la
tecla Entrar para confirmar.
Se abrir la ventana de registro del amplificador WiFi de banda dual.
Seleccione el idioma e introduzca admin como nombre de usuario y
contrasea . A continuacin, haga clic en el botn Enviar. Se abrir el men
de configuracin del amplificador WiFi de banda dual.
Utilice el asistente para realizar la configuracin. En el campo Asistente,
haga clic en el botn Repetidor.
Espaol - 21
SilverCrest SWV 300 B2
A continuacin, en la columna "Seleccionar", marque el botn de opcin
correspondiente a la red WLAN de la lista cuyo alcance quiere amplificar.
22 - Espaol
SilverCrest SWV 300 B2
Despus de seleccionar una red WLAN, en el campo SSID del repetidor
puede indicar una SSID de su eleccin para el amplificador WiFi de banda
dual. En el campo Clave de seguridad, introduzca la clave de red del
enrutador WLAN.
Cuando haya introducido todos los datos, haga clic en el botn Aplicar.
Espaol - 23
SilverCrest SWV 300 B2
A continuacin, el amplificador WiFi de banda dual se reiniciar.
24 - Espaol
SilverCrest SWV 300 B2
Modo de cliente
El modo de cliente permite conectar de forma inalmbrica dispositivos con
conexin LAN (como ordenadores, porttiles o televisores) que no disponen
de una WLAN propia a un enrutador WLAN.
Ejemplo de aplicacin:
Espaol - 25
SilverCrest SWV 300 B2
El amplificador WiFi de banda dual debe conectarse a una toma de corriente
a la cual pueda accederse fcilmente en todo momento.
26 - Espaol
SilverCrest SWV 300 B2
WPS - La configuracin ms sencilla
Esta es la manera ms fcil de configurar el amplificador WiFi de banda dual.
Sin embargo, primero debe asegurarse de que el enrutador WLAN admita
esta funcin. Consulte la documentacin del enrutador WLAN.
1. Mantenga pulsado el botn WPS (6) del amplificador WiFi de banda dual
durante 6 segundos como mnimo. El LED Power/WPS (3) parpadear
durante aproximadamente 2 minutos.
Configuracin manual
El amplificador WiFi de banda dual se puede configurar de dos maneras
diferentes.
Si no utiliza la configuracin de red predeterminada y ha
configurado la direccin IP manualmente, la configuracin de
red se deber cambiar de nuevo a Obtener una direccin
IP automticamente. Consulte la documentacin del
ordenador.
28 - Espaol
SilverCrest SWV 300 B2
Si el amplificador WiFi de banda dual se haba utilizado
previamente en otra red, es posible que ya no sea accesible a
travs de la direccin predeterminada. En este caso, se deber
restablecer la configuracin del amplificador WiFi de banda
dual. Consulte el segundo punto "No se abre el men de
configuracin del amplificador WiFi de banda dual" del
captulo "Solucin de problemas".
Espaol - 29
SilverCrest SWV 300 B2
Se abrir la ventana de registro del amplificador WiFi de banda dual.
Seleccione el idioma e introduzca admin como nombre de usuario y
contrasea. A continuacin, haga clic en el botn Enviar. Se abrir el men
de configuracin del amplificador WiFi de banda dual.
Utilice el asistente para realizar la configuracin. En el campo Asistente,
haga clic en el botn Cliente.
30 - Espaol
SilverCrest SWV 300 B2
A continuacin, en la columna "Seleccionar", marque el botn de opcin
correspondiente a la red WLAN a la que quiere conectar el amplificador WiFi
de banda dual.
Espaol - 31
SilverCrest SWV 300 B2
Cuando haya seleccionado una red WLAN, introduzca la clave de seguridad
del enrutador WLAN en el campo Clave de seguridad.
Cuando haya introducido todos los datos, haga clic en el botn Aplicar.
32 - Espaol
SilverCrest SWV 300 B2
A continuacin, el amplificador WiFi de banda dual se reiniciar.
Espaol - 33
SilverCrest SWV 300 B2
Modo de punto de acceso
El modo de punto de acceso permite crear un "punto de acceso inalmbrico".
Este modo permite conectar dispositivos WLAN al amplificador WiFi de banda
dual. Asimismo, este modo tambin permite, por ejemplo, dotar de
funcionalidad WLAN a un enrutador que no la tenga.
Ejemplo de aplicacin:
34 - Espaol
SilverCrest SWV 300 B2
El amplificador WiFi de banda dual debe conectarse a una toma de corriente
a la cual pueda accederse fcilmente en todo momento.
Espaol - 35
SilverCrest SWV 300 B2
restablecer la configuracin del amplificador WiFi de banda
dual. Consulte el segundo punto "No se abre el men de
configuracin del amplificador WiFi de banda dual" del
captulo "Solucin de problemas".
36 - Espaol
SilverCrest SWV 300 B2
Espaol - 37
SilverCrest SWV 300 B2
Cuando haya seleccionado el cifrado, introduzca una clave de seguridad en
el campo Clave de seguridad. Anote la clave de seguridad o gurdela en
un lugar seguro.
Cuando haya introducido todos los datos, haga clic en el botn Aplicar.
38 - Espaol
SilverCrest SWV 300 B2
A continuacin, el amplificador WiFi de banda dual se reiniciar.
Espaol - 39
SilverCrest SWV 300 B2
WPS - Establecimiento de la conexin con un punto de
acceso
Esta es la manera ms sencilla de establecer una conexin con un punto de
acceso. Sin embargo, primero debe asegurarse de que el dispositivo admita
esta funcin. Consulte la documentacin del dispositivo.
1. Mantenga pulsado el botn WPS (6) del amplificador WiFi de banda dual
durante 3 segundos. El LED Power/WPS (3) parpadear durante
aproximadamente 2 minutos.
40 - Espaol
SilverCrest SWV 300 B2
Si el dispositivo no admite la funcin WPS, la conexin con el amplificador
WiFi de banda dual (punto de acceso) tambin puede establecerse de forma
manual.
Espaol - 41
SilverCrest SWV 300 B2
Si el amplificador WiFi de banda dual se haba utilizado
previamente en otra red, es posible que ya no sea accesible a
travs de la direccin predeterminada. En este caso, se deber
restablecer la configuracin del amplificador WiFi de banda
dual. Consulte el segundo punto "No se abre el men de
configuracin del amplificador WiFi de banda dual" del
captulo "Solucin de problemas".
42 - Espaol
SilverCrest SWV 300 B2
Se abrir la ventana de registro del amplificador WiFi de banda dual.
Seleccione el idioma e introduzca admin como nombre de usuario y
contrasea. A continuacin, haga clic en el botn Enviar.
Espaol - 43
SilverCrest SWV 300 B2
Se abrir el men de configuracin del amplificador WiFi de banda dual.
Asistente
El asistente permite configurar fcilmente el amplificador WiFi de banda dual.
Aqu se indica el modo seleccionado actualmente (repetidor, cliente o punto
de acceso). Para iniciar el asistente, haga clic en el botn Repetidor,
Cliente o Punto de acceso. A continuacin, siga las instrucciones en
pantalla del asistente.
44 - Espaol
SilverCrest SWV 300 B2
Informacin de la red inalmbrica
Aqu se muestra la informacin sobre la red inalmbrica del amplificador WiFi
de banda dual.
Estado
Aqu se muestra el estado actual del amplificador WiFi de banda dual.
Conectado a
Aqu se muestra el dispositivo WLAN al cual est conectado el amplificador
WiFi de banda dual.
2.4G SSID
Aqu se muestra la SSID (nombre de la WLAN) correspondiente a la banda
2.4G del amplificador WiFi de banda dual.
Canal
Aqu se muestra el canal de la banda 2.4G que est utilizando el amplificador
WiFi de banda dual.
5G SSID
Aqu se muestra la SSID (nombre de la WLAN) correspondiente a la banda
5G del amplificador WiFi de banda dual.
Canal
Aqu se muestra el canal de la banda 5G que est utilizando el amplificador
WiFi de banda dual.
WiFi
Este apartado permite acceder a otros ajustes de la WLAN. Haga clic
directamente en la opcin correspondiente:
Espaol - 45
SilverCrest SWV 300 B2
Ajustes bsicos (2.4G / 5G)
Esta opcin est disponible para las bandas 2.4G y 5G.
46 - Espaol
SilverCrest SWV 300 B2
Canal
Aqu se puede seleccionar el canal que debe utilizar el amplificador WiFi de
banda dual. Si quiere que el amplificador WiFi de banda dual seleccione el
canal automticamente, utilice la opcin Auto.
Tipo de seguridad
Esta opcin permite seleccionar el cifrado de la red.
Haga clic en el botn Aplicar para guardar los cambios realizados.
Espaol - 47
SilverCrest SWV 300 B2
Avanzada (2.4G / 5G)
Esta opcin est disponible para las bandas 2.4G y 5G.
Esta opcin solo debe ser utilizada por usuarios avanzados, puesto que
permite modificar la configuracin de la red. Debido a que la configuracin
debe adaptarse individualmente a cada red, aqu no entraremos en ms
detalles. Para obtener ms informacin, llame a nuestro servicio de atencin
telefnica (vase la pgina 67).
48 - Espaol
SilverCrest SWV 300 B2
Haga clic en el botn Aplicar para guardar los cambios realizados.
WDS (2.4G / 5G)
Esta opcin est disponible para las bandas 2.4G y 5G.
Tenga en cuenta que el WDS no est activado por defecto, sino que debe
activarse manualmente.
Espaol - 49
SilverCrest SWV 300 B2
Es probable que tambin deban configurarse los parmetros
de los dems miembros de la red. Consulte la documentacin
de los distintos dispositivos.
Habilitar WDS
Marque esta casilla para activar el WDS.
Ajustes WDS Direccin MAC
Introduzca la direccin MAC del punto de acceso que debe conectarse al
amplificador WiFi de banda dual.
Ajustes WDS - Canal
Seleccione el canal que debe utilizar el amplificador WiFi de banda dual.
Tenga presente que todos los puntos de acceso deben utilizar el mismo canal.
Si no sabe el canal que utiliza el otro dispositivo, consltelo en la
configuracin. Consulte la documentacin del dispositivo correspondiente.
Ajustes WDS - Comentario
Aqu puede introducir sus observaciones.
Ajustes de seguridad - Cifrado
Esta opcin permite seleccionar el cifrado de la red. Despus de seleccionar el
cifrado, configure el resto de parmetros de cifrado e introduzca la clave de
red. Tenga presente que todos los puntos de acceso deben utilizar el mismo
cifrado. Se recomienda aplicar directamente el cifrado actual de la red
inalmbrica WLAN.
Haga clic en el botn Aplicar para guardar los cambios realizados.
50 - Espaol
SilverCrest SWV 300 B2
Horario (2.4G / 5G)
Esta opcin est disponible para las bandas 2.4G y 5G.
Espaol - 51
SilverCrest SWV 300 B2
el da de la semana en la lnea correspondiente o la opcin Cada da para
seleccionar todos los das. Acto seguido, introduzca las horas entre las cuales
debe encenderse la red inalmbrica WLAN.
Haga clic en el botn Aplicar para guardar los cambios realizados.
52 - Espaol
SilverCrest SWV 300 B2
WPS
Habilitar WPS
Cuando se entrega el aparato, la funcin WPS est habilitada. Esta opcin
permite habilitar y deshabilitar la funcin WPS. Haga clic en el botn
Habilitado/Deshabilitar. El amplificador WiFi de banda dual se
reiniciar directamente. Cuando el botn Habilitado/Deshabilitar es de
color verde, significa que la funcin WPS est habilitada. Cuando el botn
Deshabilitado/Habilitar es de color gris, significa que la funcin WPS
est deshabilitada. Tenga presente que, cuando la funcin WPS est
deshabilitada, no es posible utilizarla para establecer la conexin con el
dispositivo WLAN. Asimismo, el botn WPS (6) del amplificador WiFi de
banda dual tambin dejar de funcionar.
Espaol - 53
SilverCrest SWV 300 B2
PIN
Aqu se muestra el PIN WPS del amplificador WiFi de banda dual. Este PIN
WPS permite conectar el amplificador WiFi de banda dual al enrutador
WLAN. Para ello, el enrutador WLAN debe admitir el mtodo PIN WPS.
Introduzca el PIN WPS en el enrutador WLAN. Consulte la documentacin del
enrutador WLAN. El amplificador WiFi de banda dual se conectar
automticamente al enrutador WLAN y cargar todos los ajustes. Cuando se
haya establecido la conexin, se iluminar el LED de la seal 2.4G (1) o el
LED de la seal 5G (2). Despus de esto, el amplificador WiFi de banda dual
ya est listo para utilizarse.
Registrar WPS
Esta opcin permite conectar el amplificador WiFi de banda dual a un
dispositivo con WPS utilizando la banda 2.4G o 5G. Haga clic en el botn
Iniciar PBC para iniciar la funcin WPS. El LED Power/WPS (3) del
amplificador WiFi de banda dual parpadear durante aproximadamente 2
minutos. Dentro de este plazo de 2 minutos, pulse el botn de conexin (WPS)
del dispositivo. Consulte la documentacin del dispositivo. A continuacin, el
amplificador WiFi de banda dual se conectar automticamente al dispositivo.
Cuando se haya establecido la conexin, se iluminar el LED de la seal 2.4G
(1) o el LED de la seal 5G (2). Despus de esto, el amplificador WiFi de
banda dual ya est listo para utilizarse. Para cerrar la funcin WPS, haga clic
en el botn Parar PBC.
Seleccionar banda
Esta opcin permite seleccionar la banda, 2.4G o 5G, en la que debe
ejecutarse la funcin WPS.
54 - Espaol
SilverCrest SWV 300 B2
Registrar WPS
Esta opcin permite conectar el amplificador WiFi de banda dual a un
enrutador WLAN con WPS utilizando la banda 2.4G o 5G seleccionada
previamente. Haga clic en el botn Iniciar PBC para iniciar la funcin WPS.
El LED Power/WPS (3) del amplificador WiFi de banda dual parpadear
durante aproximadamente 2 minutos. Dentro de este plazo de 2 minutos, pulse
el botn de conexin (WPS) del enrutador WLAN. Consulte la documentacin
del enrutador WLAN. El amplificador WiFi de banda dual se conectar
automticamente al enrutador WLAN y cargar todos los ajustes. Cuando se
haya establecido la conexin, se iluminar el LED de la seal 2.4G (1) o el
LED de la seal 5G (2). Despus de esto, el amplificador WiFi de banda dual
ya est listo para utilizarse Para cerrar la funcin WPS, haga clic en el botn
Parar PBC.
Estado WPS
Aqu se muestra el estado actual de la funcin WPS del amplificador WiFi de
banda dual. Pueden mostrarse los siguientes estados: En reposo Todava
no se ha iniciado la bsqueda WPS; Iniciado La bsqueda WPS est en
curso; Error Error al establecer la conexin WPS; Correcto La
conexin WPS se ha establecido correctamente; y Tiempo agotado!
No se ha podido establecer la conexin WPS porque se ha excedido el
tiempo disponible.
Espaol - 55
SilverCrest SWV 300 B2
LAN
Aqu se muestra directamente la direccin IP utilizada, el modo DHCP
configurado y la direccin MAC del amplificador WiFi de banda dual. Para
modificar la configuracin de la red, haga clic en el botn LAN.
Direccin IP
Aqu se puede modificar la direccin IP del amplificador WiFi de banda dual.
DHCP
Aqu se puede ajustar el modo DHCP. Estn disponibles las opciones
siguientes: Deshabilitar, Servidor y Auto. Cuando se entrega el aparato,
est activada la opcin Servidor. Con la opcin Servidor, las direcciones
IP se asignan automticamente y se registran en una tabla. Por lo contrario, en
la opcin Auto, las asignaciones son permanentes y no se deshacen. Esta
opcin tiene la ventaja de que los dispositivos reciben siempre la misma
direccin IP, y el inconveniente de que los nuevos dispositivos no pueden
recibir ninguna direccin IP nueva si ya est asignado todo el rango de
56 - Espaol
SilverCrest SWV 300 B2
direcciones, aunque en ese momento no se est utilizando activamente
ninguna direccin IP.
Haga clic en el botn Aplicar para guardar los cambios realizados o en el
botn Cancelar para descartarlos.
Administracin
Esta opcin permite configurar ms parmetros e instalar una nueva versin de
firmware. Haga clic en el botn Administracin o directamente en la
opcin que desee:
Espaol - 57
SilverCrest SWV 300 B2
Contrasea
Esta opcin permite modificar la contrasea predeterminada (admin) para
acceder al amplificador WiFi de banda dual. Introduzca una vez el nombre de
usuario y dos veces la nueva contrasea.
58 - Espaol
SilverCrest SWV 300 B2
Ajustes de zona horaria
Aqu se puede ajustar la fecha y la hora. Introduzca manualmente la fecha y
la hora o haga clic en el botn Copiar hora del ordenador para utilizar
la fecha y la hora del ordenador.
Espaol - 59
SilverCrest SWV 300 B2
Guardar/cargar ajustes
Esta opcin permite guardar, cargar y restablecer la configuracin del
amplificador WiFi de banda dual.
60 - Espaol
SilverCrest SWV 300 B2
pregunta de seguridad con Aceptar para cargar la configuracin de fbrica
o haga clic en Cancelar para cancelar la operacin.
Tenga en cuenta que, al restablecer la configuracin de
fbrica, se perdern todos los cambios realizados hasta el
momento.
Actualizar firmware
Si recibe una nueva versin del firmware, puede instalarla. Haga clic en el
botn Examinar... y seleccione la nueva versin del firmware en el
ordenador. A continuacin, siga las instrucciones de la pantalla para
instalarla.
Espaol - 61
SilverCrest SWV 300 B2
Reiniciar dispositivo
Esta opcin permite reiniciar el amplificador WiFi de banda dual.
Estado
Aqu se muestra directamente la versin del firmware actual, el tiempo de
funcionamiento desde la ltima puesta en marcha y la fecha de publicacin de
la versin del firmware instalada del amplificador WiFi de banda dual. Haga
clic en el botn Estado para acceder a la informacin detallada del sistema y
las redes WLAN 5G, WLAN 2.4G y LAN.
62 - Espaol
SilverCrest SWV 300 B2
Espaol - 63
SilverCrest SWV 300 B2
Solucin de problemas
64 - Espaol
SilverCrest SWV 300 B2
dual se reinicia al cabo de unos segundos despus de soltarlo. Para avisar
de esta circunstancia, los LED se apagan brevemente y vuelven a iluminarse
al cabo de unos segundos. Intente establecer de nuevo la conexin con el
botn WPS.
Solucione el problema que est provocando interferencias entre el
amplificador WiFi de banda dual y el enrutador WLAN.
El amplificador WiFi de banda dual y el enrutador WLAN estn demasiado
alejados; acrquelos.
No se abre el men de configuracin del amplificador WiFi de
banda dual.
No se ha introducido correctamente la direccin IP http://192.168.10.1 en
la barra de direccin del navegador de internet. Comprubela y corrjala.
El amplificador WiFi de banda dual ya se ha configurado y utiliza otra
direccin IP. Restablezca el amplificador WiFi de banda dual al estado de
entrega. Despus de mantener pulsado el botn de reinicio (7) durante 10
segundos como mnimo con un objeto puntiagudo, el amplificador WiFi de
banda dual se reinicia al cabo de unos segundos despus de soltarlo. Para
avisar de esta circunstancia, los LED se apagan brevemente y vuelven a
iluminarse al cabo de unos segundos.
Espaol - 65
SilverCrest SWV 300 B2
66 - Espaol
SilverCrest SWV 300 B2
Servicio tcnico
Telfono: 91 45 34 303
E-Mail: service.ES@targa-online.com
IAN: 93826
Fabricante
TARGA GmbH
Coesterweg 45
59494 SOEST
GERMANY
Espaol - 67
SilverCrest SWV 300 B2
Sommario
Introduzione ...................................................................... 70
Utilizzo conforme alla destinazione d'uso .......................... 70
Dotazione .......................................................................... 71
Panoramica ....................................................................... 72
LED .............................................................................................................. 73
Dati tecnici ......................................................................... 74
Disposizioni di sicurezza .................................................... 74
Manutenzione/pulizia ....................................................... 79
Conservazione in caso di mancato utilizzo......................... 80
Diritto d'autore .................................................................. 80
Prima della messa in funzione ........................................... 80
Messa in funzione .............................................................. 82
Impostare modalit .................................................................................... 82
Modalit Ripetitore (Repeater) ................................................................. 82
WPS - La configurazione pi semplice .................................................. 84
Configurazione manuale ........................................................................ 86
Modalit Client .......................................................................................... 91
WPS - La configurazione pi semplice .................................................. 93
Configurazione manuale ........................................................................ 94
Modalit Access Point (AP) ................................................................... 100
WPS - Connessione all'Access Point ................................................... 106
Connessione manuale all'Access Point ............................................... 107
68 - Italiano
SilverCrest SWV 300 B2
Menu di configurazione dell'amplificatore WLAN dualband ............ 107
Procedura guidata ............................................................................... 110
Informazioni wireless ........................................................................... 111
WiFi ....................................................................................................... 111
LAN ....................................................................................................... 121
Gestione ................................................................................................ 122
Stato ...................................................................................................... 127
Avvertenze per l'ambiente e indicazioni di smaltimento.. 128
Marchio di conformit ..................................................... 128
Risoluzione dei problemi ................................................. 129
Informazioni sulla garanzia e sull'assistenza .................. 131
Italiano - 69
SilverCrest SWV 300 B2
Introduzione
70 - Italiano
SilverCrest SWV 300 B2
Dotazione
Italiano - 71
SilverCrest SWV 300 B2
Panoramica
Queste istruzioni d'uso sono dotate di una copertina con risvolto. Sul lato
interno della copertina raffigurato l'amplificatore WLAN dualband. Alcune
parti sono numerate. La numerazione ha il significato seguente:
1 LED Segnale 2.4G
2 LED Segnale 5G
3 LED Power/WPS
4 LED WLAN
5 LED LAN
6 Tasto WPS
7 Tasto Reset (lato destro)
8 Presa LAN (presa di rete, RJ-45)
9 Interruttore principale
10 Selettore di modalit
72 - Italiano
SilverCrest SWV 300 B2
LED
Italiano - 73
SilverCrest SWV 300 B2
Dati tecnici
Disposizioni di sicurezza
Prima di utilizzare per la prima volta l'apparecchio leggere attentamente le
istruzioni qui di seguito riportate, anche se si possiede una certa familiarit con
le apparecchiature elettroniche. Conservare accuratamente queste istruzioni
d'uso come riferimento futuro. In caso di cessione dell'apparecchio consegnare
anche queste istruzioni, che fanno parte dell'apparecchio stesso.
AVVERTENZA! Questo simbolo contrassegna indicazioni
importanti per il funzionamento sicuro dell'apparecchio e per la
protezione dell'utente. Il mancato rispetto di queste indicazioni
pu causare danni materiali e/o danni alla salute, fino alla
morte.
74 - Italiano
SilverCrest SWV 300 B2
Condizioni operative
Non utilizzare l'apparecchio in ambienti ad elevata temperatura o con alta
umidit dellaria (ad es. in bagno) oppure in luoghi eccessivamente polverosi.
Temperatura e umidit operative: da 5 C a 35 C, max. 85 % di umidit
relativa.
Posizionare sempre l'apparecchio a una distanza minima di 20 cm dal corpo,
per evitare i danni dovuti alle radiazioni elettromagnetiche.
Attenzione:
Italiano - 75
SilverCrest SWV 300 B2
immergerlo in acqua (non collocare oggetti colmi di liquidi, ad es. vasi o
bevande sopra o vicino all'apparecchio);
non esporre l'apparecchio ad elevate variazioni della temperatura, poich
l'umidit potrebbe condensarsi e causare cortocircuiti elettrici. Se, tuttavia,
l'apparecchio stato esposto a notevoli sbalzi termici, attendere (circa 2
ore) che l'apparecchio stesso si adegui alla temperatura dell'ambiente prima
di utilizzarlo;
non sottoporre l'apparecchio a scosse e vibrazioni eccessive;
non afferrare mai l'apparecchio con le mani bagnate, pericolo di scossa
elettrica;
non coprire mai l'apparecchio, pericolo di incendio.
Sicurezza di funzionamento
76 - Italiano
SilverCrest SWV 300 B2
dalla rete elettrica. In questo modo si minimizza anche il rischio di incendi o
di combustione senza fiamma che sempre presente quando un
apparecchio collegato alla rete elettrica.
Scollegare l'amplificatore WLAN dualband anche in caso di intemperie o di
un temporale, con presenza di fulmini, in quanto, se colpito da un fulmine,
l'amplificatore potrebbe venir distrutto in seguito a sovratensione.
Per scollegare completamente lamplificatore WLAN dualband dalla rete
elettrica estrarre la spina.
Non utilizzare adattatori o prolunghe che siano danneggiati o che non
siano conformi alle norme di sicurezza in vigore.
Cavi
Gli apparecchi elettrici devono essere tenuti fuori dalla portata dei bambini.
Anche le persone diversamente abili dovrebbero utilizzare gli apparecchi
elettrici solo nell'ambito delle loro possibilit. Non lasciare mai bambini e
Italiano - 77
SilverCrest SWV 300 B2
persone diversamente abili incustoditi a contatto con apparecchi elettrici, se
non dietro supervisione o istruzione iniziale sullutilizzo degli apparecchi stessi
da parte di chi responsabile della loro sicurezza. Sorvegliare i bambini,
assicurandosi che non giochino con l'apparecchio. Le piccole parti, se
inghiottite, possono costituire un pericolo mortale. Tenere lontani anche i fogli
di cellophane degli imballaggi.
Pericolo di soffocamento.
Interfaccia radio
78 - Italiano
SilverCrest SWV 300 B2
radio o TV causati da modifiche non autorizzate a questo apparecchio. Targa,
inoltre, non si assume alcuna responsabilit per il ricambio o la sostituzione di
connettori e apparecchi che non sono stati forniti dall'azienda stessa. L'utente
il solo responsabile della riparazione di guasti dovuti a una modifica non
autorizzata del genere e del ricambio o della sostituzione dell'apparecchio.
Manutenzione/pulizia
Italiano - 79
SilverCrest SWV 300 B2
Diritto d'autore
80 - Italiano
SilverCrest SWV 300 B2
di 2.4GHz e 5GHz. In questo modo l'amplificatore WLAN dualband pu
essere utilizzato in reti WLAN di 2.4GHz e 5GHz. L'amplificatore WLAN
dualband supporta le tre seguenti modalit:
Ripetitore (Repeater)
La portata della propria rete senza fili viene aumentata e resa disponibile per
reti WLAN di 2.4GHz e 5GHz. In questo modo i dispositivi WLAN che si
trovano al di fuori della portata della rete senza fili, vengono collegati a
questa rete mediante l'amplificatore WLAN dualband.
Client
possibile connettere un dispositivo con interfaccia LAN (ad es. computer,
notebook o televisore) che non dispone di una propria WLAN all'amplificatore
WLAN dualband tramite un cavo LAN (cavo di rete). L'amplificatore WLAN
dualband pu quindi connettere senza fili il proprio dispositivo ad un router
WLAN gi esistente.
Non possibile garantire la compatibilit con tutti i dispositivi, pertanto
consultare la documentazione dell'apparecchio.
Access Point
Questa modalit pu essere ad esempio utilizzata per mettere a disposizione
un router, che non dispone di una propria WLAN, come "Router WLAN. A tal
fine il router deve essere collegato tramite un cavo LAN (cavo di rete, vedere
dotazione) all'amplificatore WLAN dualband.
Italiano - 81
SilverCrest SWV 300 B2
Messa in funzione
Impostare modalit
Selezionare la modalit desiderata con il selettore di modalit (10). Spostare
a tal fine il selettore di modalit (10) sulla posizione desiderata (Ripetitore,
Client o Access Point).
Collegare l'amplificatore WLAN dualband alla rete elettrica solo tramite una
presa ben raggiungibile.
Italiano - 85
SilverCrest SWV 300 B2
Configurazione manuale
Vi sono due diverse possibilit di configurazione dell'amplificatore WLAN
dualband.
Se non si utilizzano le impostazioni di rete standard ed stato
impostato manualmente un indirizzo IP, occorre cambiare
nuovamente le impostazioni di rete su Ottieni
automaticamente un indirizzo IP. Consultare a tale
scopo la documentazione del proprio computer.
Se l'amplificatore WLAN dualband stato precedentemente
utilizzato in un'altra rete, pu essere che non sia pi disponibile
sotto l'indirizzo standard. In questo caso necessario resettare
l'apparecchio. Consultare nel capitolo "Risoluzione dei
problemi" il secondo punto della questione "Il menu di
configurazione dell'amplificatore WLAN dualband non viene
visualizzato".
86 - Italiano
SilverCrest SWV 300 B2
quindi la rete WiFi-Repeater(2.4G) o WiFi-Repeater(5G) e fare
clic sul pulsante Connetti, per connettersi in modalit wireless
all'amplificatore WLAN dualband. Dopo aver premuto il pulsante
Connetti, possibile dover fare clic anche sull'opzione Connetti
senza configurare la rete.
Aprire quindi il browser di internet sul computer. Nella barra degli indirizzi del
browser di internet digitare http://192.168.10.1 e confermare
l'inserimento con il tasto Invio.
Si aprir la finestra di login dell'amplificatore WLAN dualband. Selezionare la
lingua desiderata (Language) e inserire admin come nome utente (Username)
e password. Dopodich fare clic sul pulsante Invia (Submit). Si apre quindi il
menu di configurazione dell'amplificatore WLAN dualband.
Eseguire la configurazione con l'ausilio della procedura guidata. A tal fine fare
clic nel campo Procedura guidata sul pulsante Ripetitore.
Italiano - 87
SilverCrest SWV 300 B2
Selezionare dall'elenco una rete WLAN di cui si intende ampliare la portata,
marcando la rete corrispondente nel campo "Seleziona".
88 - Italiano
SilverCrest SWV 300 B2
Dopo aver selezionato una rete WLAN, alla voce SSID ripetitore
possibile indicare un SSID a scelta per l'amplificatore WLAN dualband. Nel
campo Chiave di sicurezza inserire la chiave di rete del router WLAN.
Italiano - 89
SilverCrest SWV 300 B2
L'amplificatore WLAN dualband si riavvia.
90 - Italiano
SilverCrest SWV 300 B2
Modalit Client
La modalit Client consente di connettere in modo wireless dispositivi con
interfaccia LAN (ad es. computer, notebook o televisore) che non dispongono
di una propria WLAN, a un router WLAN gi esistente.
Esempio di applicazione:
Italiano - 91
SilverCrest SWV 300 B2
Collegare l'amplificatore WLAN dualband alla rete elettrica solo tramite una
presa ben raggiungibile.
92 - Italiano
SilverCrest SWV 300 B2
WPS - La configurazione pi semplice
Questo il modo pi semplice per configurare l'amplificatore WLAN
dualband. Accertarsi innanzitutto che la funzione WPS sia supportata dal
proprio router WLAN. Consultare a tale scopo la documentazione del router
WLAN.
1. Premere il tasto WPS (6) nell'amplificatore WLAN dualband per almeno 6
secondi. Il LED Power/WPS (3) lampegger per circa 2 minuti.
Configurazione manuale
Vi sono due diverse possibilit di configurazione dell'amplificatore WLAN
dualband.
94 - Italiano
SilverCrest SWV 300 B2
Se l'amplificatore WLAN dualband stato precedentemente
utilizzato in un'altra rete, pu essere che non sia pi disponibile
sotto l'indirizzo standard. In questo caso necessario resettare
l'apparecchio. Consultare nel capitolo "Risoluzione dei
problemi" il secondo punto della questione "Il menu di
configurazione dell'amplificatore WLAN dualband non viene
visualizzato".
Italiano - 95
SilverCrest SWV 300 B2
Si aprir la finestra di login dell'amplificatore WLAN dualband. Selezionare la
lingua desiderata (Language) e inserire admin come nome utente (Username)
e password. Dopodich fare clic sul pulsante Invia (Submit). Si apre quindi il
menu di configurazione dell'amplificatore WLAN dualband.
Eseguire la configurazione con l'ausilio della procedura guidata. A tal fine fare
clic nel campo Procedura guidata sul pulsante Client.
96 - Italiano
SilverCrest SWV 300 B2
Selezionare dall'elenco una rete WLAN a cui si intende connettere
l'amplificatore WLAN dualband, marcando la rete corrispondente nel campo
"Seleziona".
Italiano - 97
SilverCrest SWV 300 B2
Dopo aver selezionato una rete WLAN, alla voce Chiave di sicurezza
indicare la chiave di rete del router WLAN.
98 - Italiano
SilverCrest SWV 300 B2
L'amplificatore WLAN dualband si riavvia.
Italiano - 99
SilverCrest SWV 300 B2
Modalit Access Point (AP)
Utilizzare la modalit Access Point per ottenere un "punto di accesso wireless".
In questa modalit possibile connettere dispositivi WLAN all'amplificatore
WLAN dualband. Inoltre possibile ad esempio trasformare un router non
abilitato a WLAN in un router WLAN.
Esempio di applicazione:
100 - Italiano
SilverCrest SWV 300 B2
Collegare l'amplificatore WLAN dualband alla rete elettrica solo tramite una
presa ben raggiungibile.
Italiano - 101
SilverCrest SWV 300 B2
l'apparecchio. Consultare nel capitolo "Risoluzione dei
problemi" il secondo punto della questione "Il menu di
configurazione dell'amplificatore WLAN dualband non viene
visualizzato".
Italiano - 103
SilverCrest SWV 300 B2
Dopo aver selezionare una crittografia, occorre quindi indicare una chiave di
rete nel campo Chiave di sicurezza. Memorizzare bene la chiave di rete o
custodirla in un luogo sicuro.
104 - Italiano
SilverCrest SWV 300 B2
L'amplificatore WLAN dualband si riavvia.
Italiano - 105
SilverCrest SWV 300 B2
WPS - Connessione all'Access Point
Questo il modo pi semplice per stabilire una connessione con l'Access Point.
Accertarsi innanzitutto che la funzione WPS sia supportata dal proprio
dispositivo. Consultare a tale scopo la documentazione del dispositivo.
1. Premere il tasto WPS (6) dell'amplificatore WLAN dualband per circa 3
secondi. Il LED Power/WPS (3) lampegger per circa 2 minuti.
106 - Italiano
SilverCrest SWV 300 B2
Connessione manuale all'Access Point
Per stabilire manualmente una connessione con l'amplificatore WLAN
dualband (Access Point), necessario cercare le reti wireless disponibili sul
proprio dispositivo. Nell'elenco delle reti wireless disponibili si visualizza
l'amplificatore WLAN dualband (Access Point) sotto l'SSID indicato dall'utente.
Selezionare l'SSID corrispondente per connettere in modo wireless il dispositivo
all'amplificatore WLAN dualband (Access Point). Inserire la chiave di rete
assegnata dall'utente. Consultare la documentazione del dispositivo.
Italiano - 107
SilverCrest SWV 300 B2
Se l'amplificatore WLAN dualband stato precedentemente
utilizzato in un'altra rete, pu essere che non sia pi disponibile
sotto l'indirizzo standard. In questo caso necessario resettare
l'apparecchio. Consultare nel capitolo "Risoluzione dei
problemi" il secondo punto della questione "Il menu di
configurazione dell'amplificatore WLAN dualband non viene
visualizzato".
108 - Italiano
SilverCrest SWV 300 B2
Si aprir la finestra di login dell'amplificatore WLAN dualband. Selezionare la
lingua desiderata (Language) e inserire admin come nome utente (Username)
e password. Dopodich fare clic sul pulsante Invia (Submit).
Italiano - 109
SilverCrest SWV 300 B2
Si apre quindi il menu di configurazione dell'amplificatore WLAN dualband.
Procedura guidata
Questa procedura permette di configurare facilmente l'amplificatore WLAN
dualband. Si visualizza la modalit attualmente impostata (Ripetitore, Client o
AP (Access Point)). Per avviare la procedura guidata, fare clic sul pulsante
Ripetitore, Client o AP (Access Point). Seguire le istruzioni della procedura
guidata sullo schermo.
110 - Italiano
SilverCrest SWV 300 B2
Informazioni wireless
In questo punto si visualizzano le informazioni sulla rete wireless
dell'amplificatore WLAN dualband.
Stato
In questo punto si visualizza lo stato attuale dell'amplificatore WLAN
dualband.
Connetti a
In questo punto si visualizza con quale dispositivo WLAN connesso
l'amplificatore WLAN dualband.
SSID 2.4G
In questo punto si visualizza l'SSID (nome WLAN) della banda 2.4G
dell'amplificatore WLAN dualband.
Canale
In questo punto si visualizza il canale della banda 2.4G utilizzato
dall'amplificatore WLAN dualband.
SSID 5G
In questo punto si visualizza l'SSID (nome WLAN) della banda 5G
dell'amplificatore WLAN dualband.
Canale
In questo punto si visualizza il canale della banda 5G utilizzato
dall'amplificatore WLAN dualband.
WiFi
In questo punto possibile eseguire altre impostazioni relative alla WLAN. A
tal fine fare clic direttamente sull'opzione desiderata:
Italiano - 111
SilverCrest SWV 300 B2
Impostazioni di base (2.4G / 5G)
Questa opzione disponibile per la banda 2.4G e 5G.
Abilitazione wireless
In questo punto possibile abilitare o disabilitare il wireless. Fare clic a tale
scopo sul pulsante Abilitato/Disabilita. Se il pulsante
Abilitato/Disabilita viene rappresentato in verde, il wireless abilitato. Se
il pulsante Disabilitato/Abilita viene rappresentato in grigio, il wireless
disabilitato.
SSID
In questo punto possibile adeguare l'SSID (nome WLAN) dell'amplificatore
WLAN dualband.
112 - Italiano
SilverCrest SWV 300 B2
Canale
Qui possibile selezionare un canale che deve essere utilizzato
dall'amplificatore WLAN dualband. Utilizzare l'opzione Auto, se il canale
deve venire automaticamente selezionato dall'amplificatore WLAN dualband.
Tipo di sicurezza
Impostare in questo punto una crittografia per la rete.
Fare clic sul pulsante Applica per applicare le impostazioni modificate.
Italiano - 113
SilverCrest SWV 300 B2
Impostazioni avanzate (2.4G / 5G)
Questa opzione disponibile per la banda 2.4G e 5G.
Italiano - 115
SilverCrest SWV 300 B2
Potrebbero essere necessarie anche impostazioni su altri
dispositivi di rete. Consultare a tal fine le rispettive
documentazioni dei dispositivi.
Abilita WDS
Mettere una spunta per abilitare il WDS (Wireless Distribution System).
Impostazioni WDS Indirizzo MAC
Inserire in questo punto l'indirizzo MAC dell'Access Point che deve
ess ere co llegato all'amplificatore WLAN dualband.
Impostazioni WDS - Canale
Selezionare in questo punto un canale che deve essere utilizzato
dall'amplificatore WLAN dualband. Considerare che il canale deve essere
uguale per tutti gli Access Point. Se non si conosce il canale utilizzato dall'altro
dispositivo, controllarne le impostazioni. Consultare a tale scopo la
documentazione del dispositivo corrispondente.
Impostazioni WDS - Commento
Qui possibile inserire un commento.
Impostazioni di sicurezza - Crittografia
Selezionare in questo punto una crittografia per la rete. Non appena stata
selezionata una crittografia, possibile effettuare altri inserimenti per la
crittografia e indicare la chiave di rete. Considerare che la crittografia deve
essere uguale per tutti gli Access Point. L'opzione migliore copiare la
crittografia gi esistente della propria rete wireless.
Fare clic sul pulsante Applica per applicare le impostazioni modificate.
116 - Italiano
SilverCrest SWV 300 B2
Pianificazione (2.4G / 5G)
Questa opzione disponibile per la banda 2.4G e 5G.
Italiano - 117
SilverCrest SWV 300 B2
corrispondente il giorno della settimana desiderato oppure Tutti i giorni per
una frequenza giornaliera. Indicare quindi l'intervallo temporale nel quale la
rete wireless deve essere abilitata.
Fare clic sul pulsante Applica per applicare le impostazioni modificate.
WPS
Abilita WPS
Al momento dell'acquisto la funzione WPS abilitata. Qui possibile
disattivare o attivare questa funzione. Fare clic a tale scopo sul pulsante
Abilitato/Disabilita. Dopodich l'amplificatore WLAN dualband viene
direttamente riavviato. Se il pulsante Abilitato/Disabilita rappresentato in
verde, la funzione WPS abilitata. Se il pulsante Disabilitato/Abilita
rappresentato in grigio, la funzione WPS disabilitata. Considerare che, con
la funzione WPS disabilitata, non possibile stabilire nessuna connessione a
un dispositivo WLAN mediante tale funzione. Inoltre anche il tasto WPS (6)
dell'amplificatore WLAN dualband non ha alcuna funzione.
118 - Italiano
SilverCrest SWV 300 B2
PIN
In questo punto si visualizza il PIN WPS dell'amplificatore WLAN dualband.
Con questo PIN possibile connettere l'amplificatore WLAN dualband al
proprio router WLAN. Quest'ultimo deve tuttavia supportare il metodo PIN
WPS. Immettere il PIN WPS nel router WLAN. Consultare a tale scopo la
documentazione del router WLAN. L'amplificatore WLAN dualband si
connette quindi automaticamente al router WLAN e applica tutte le
impostazioni. Non appena la connessione stata stabilita, il LED Segnale
2.4G (1) o Segnale 5G (2) si accende. quindi possibile utilizzare
l'amplificatore WLAN dualband.
Registra WPS
In questo punto possibile connettere l'amplificatore WLAN dualband a un
dispositivo abilitato al WPS nella banda 2.4G o 5G. Fare clic sul pulsante
Avvia PBC, per avviare la funzione WPS. Il LED Power/WPS (3)
dell'amplificatore WLAN dualband lampegger per circa 2 minuti. Durante
questi 2 minuti, premere il tasto di collegamento (WPS) sul dispositivo.
Consultare a tale scopo la documentazione del dispositivo. L'amplificatore
WLAN dualband si connette ora automaticamente al dispositivo. Non appena
la connessione stata stabilita, il LED Segnale 2.4G (1) o Segnale 5G (2) si
accende. quindi possibile utilizzare l'amplificatore WLAN dualband. La
funzione WPS pu essere terminata facendo clic sul pulsante Interrompi
PBC.
Selezione della banda di frequenza (Seleziona banda)
Qui possibile selezionare per quale banda 2.4G o 5G deve essere eseguita
la funzione WPS.
Italiano - 119
SilverCrest SWV 300 B2
Registra WPS
Qui possibile connettere l'amplificatore WLAN dualband con un router
abilitato per WLAN nella banda precedentemente selezionata 2.4G o 5G.
Fare clic sul pulsante Avvia PBC, per avviare la funzione WPS. Il LED
Power/WPS (3) dell'amplificatore WLAN dualband lampegger per circa 2
minuti. Durante questi 2 minuti, premere il tasto di collegamento (WPS) sul
router WLAN. Consultare a tale scopo la documentazione del router WLAN.
L'amplificatore WLAN dualband si connette quindi automaticamente al router
WLAN e applica tutte le impostazioni. Non appena la connessione stata
stabilita, il LED Segnale 2.4G (1) o Segnale 5G (2) si accende. quindi
possibile utilizzare l'amplificatore WLAN dualband. La funzione WPS pu
essere terminata facendo clic sul pulsante Interrompi PBC.
Stato WPS
In questo punto si visualizza lo stato WPS attuale dell'amplificatore WLAN
dualband. Sono possibili le seguenti visualizzazioni: Inattivo L'esecuzione
della scansione WPS non stata ancora avviata, Avviato L'esecuzione
della scansione WPS stata avviata, Operazione non riuscita La
connessione WPS non riuscita, Operazione completata La
connessione WPS stata stabilita con esito positivo e Timeout! La
connessione WPS non riuscita a causa di timeout.
120 - Italiano
SilverCrest SWV 300 B2
LAN
In questo punto vengono direttamente visualizzati l'indirizzo IP utilizzato, la
modalit DHCP impostata e l'indirizzo MAC dell'amplificatore WLAN
dualband. Fare clic sul pulsante LAN per adattare le impostazioni di rete.
Indirizzo IP
Qui possibile modificare l'indirizzo IP dell'amplificatore WLAN dualband.
DHCP
Qui possibile impostare la modalit DHCP. Sono disponibili le seguenti
opzioni: Disabilita, Server e Auto. Al momento dell'acquisto l'opzione
Server abilitata. Con l'opzione Server gli indirizzi IP vengono assegnati
automaticamente, in base a cosa definito in una tabella, a differenza
dell'opzione Auto in cui le attribuzioni automatiche sono permanenti e non
possono essere eliminate. Il vantaggio che un dispositivo riceve sempre lo
stesso indirizzo IP. Lo svantaggio che i nuovi dispositivi non ricevono nessun
Italiano - 121
SilverCrest SWV 300 B2
indirizzo IP se l'area indirizzi stata completamente assegnata, anche se vi
sono indirizzi IP che non vengono pi utilizzati attivamente.
Per applicare le impostazioni modificate, fare clic sul pulsante Applica
oppure su Annulla, per rifiutarle.
Gestione
Qui possibile eseguire ulteriori impostazioni o installare una nuova versione
del firmware. Fare clic sul pulsante Gestione oppure direttamente
sull'opzione desiderata:
122 - Italiano
SilverCrest SWV 300 B2
Password
Qui possibile modificare la password predefinita (admin) per accedere
all'amplificatore WLAN dualband. Immettere a tal fine un nuovo nome utente e
ripetere per due volte la password.
Italiano - 123
SilverCrest SWV 300 B2
Impostazioni fuso orario
Qui possibile impostare la data e l'ora. Inserire manualmente la data e l'ora
o fare clic sul pulsante Copia ora del computer, per copiare la data e
l'ora del computer.
124 - Italiano
SilverCrest SWV 300 B2
Salva/Ricarica impostazioni
In questo punto possibile salvare, caricare e resettare la configurazione
dell'amplificatore WLAN dualband.
Italiano - 125
SilverCrest SWV 300 B2
seguente richiesta di conferma con OK, per caricare definitivamente le
impostazioni di fabbrica oppure interrompere l'operazione con Annulla.
Considerare che con il ripristino delle impostazioni di fabbrica,
tutte le modifiche delle impostazioni eseguite precedentemente
andranno perse.
126 - Italiano
SilverCrest SWV 300 B2
Riavvia il dispositivo
Qui possibile riavviare l'amplificatore WLAN dualband.
Fare clic a tale scopo sul pulsante Riavvia. Confermare la seguente richiesta
di conferma con OK, per riavviare definitivamente l'amplificatore WLAN
dualband oppure interrompere l'operazione con Annulla.
Stato
Qui vengono direttamente visualizzati la versione del firmware utilizzata, la
durata di funzionamento dopo l'ultima accensione e la data di pubblicazione
della versione firmware installata dell'amplificatore WLAN dualband. Fare clic
sul pulsante Stato per visualizzare ulteriori informazioni. Si visualizzano
quindi informazioni dettagliate sul sistema, WLAN 5G, WLAN 2.4G e LAN.
Italiano - 127
SilverCrest SWV 300 B2
Marchio di conformit
Questo apparecchio conforme, nel rispetto dei requisiti
essenziali e delle relative disposizioni, alla direttiva Bassa
Tensione 2006/95/EC, alla direttiva R&TTE 1999/5/EC, alla
direttiva ErP 2009/125/EC e alla direttiva RoHS 2011/65/EU.
La relativa dichiarazione di conformit si trova al termine di
queste istruzioni.
128 - Italiano
SilverCrest SWV 300 B2
Italiano - 129
SilverCrest SWV 300 B2
un paio di secondi dopo il rilascio del tasto. Ci riconoscibile dal fatto che
i LED si spengono brevemente e si riaccendono dopo un paio di secondi.
Riprovare quindi a stabilire una connessione con il tasto WPS.
Eliminare sorgenti di interferenza tra l'amplificatore WLAN dualband e il
router WLAN.
L'amplificatore WLAN dualband e il router WLAN sono troppo distanti,
avvicinarli.
Il menu di configurazione dell'amplificatore WLAN dualband
non viene visualizzato.
L'indirizzo IP http://192.168.10.1 non stato inserito correttamente nella
barra degli indirizzi del browser di internet; verificare e correggere
l'inserimento.
L'amplificatore WLAN dualband stato gi configurato e utilizza un altro
indirizzo IP. Riportare l'amplificatore WLAN dualband allo stato originale al
momento dell'acquisto. Dopo aver tenuto premuto il tasto Reset (7) per
almeno 10 secondi con un oggetto appuntito, l'amplificatore WLAN
dualband si riavvia un paio di secondi dopo il rilascio del tasto. Ci
riconoscibile dal fatto che i LED si spengono brevemente e si riaccendono
dopo un paio di secondi.
130 - Italiano
SilverCrest SWV 300 B2
Italiano - 131
SilverCrest SWV 300 B2
Assistenza
Telefono: 02 69 68 28 59
E-Mail: service.IT@targa-online.com
E-Mail: service.MT@targa-online.com
IAN: 93826
Produttore
TARGA GmbH
Coesterweg 45
59494 SOEST
GERMANY
132 - Italiano
SilverCrest SWV 300 B2
Content
Introduction..................................................................... 135
Intended use ................................................................... 135
Supplied items ................................................................. 136
Overview ........................................................................ 137
LED indicators ......................................................................................... 138
Technical data ................................................................. 139
Safety instructions ........................................................... 139
Cleaning / maintenance .................................................. 144
Storage when not in use.................................................. 145
Copyright ........................................................................ 145
Prior to use ...................................................................... 145
First use ........................................................................... 147
Setting mode ........................................................................................... 147
Repeater Mode....................................................................................... 147
WPS - The easiest type of configuration ............................................. 149
Manual configuration .......................................................................... 151
Client Mode ............................................................................................ 156
WPS - The easiest type of configuration ............................................. 158
Manual configuration .......................................................................... 159
AP Mode ................................................................................................. 165
WPS - Connect to the AP ..................................................................... 171
Manual connection to the AP .............................................................. 172
English - 133
SilverCrest SWV 300 B2
Configuration menu of the dual-band wifi range extender ................. 172
Wizard .................................................................................................. 175
Wireless Info ......................................................................................... 176
WiFi ....................................................................................................... 176
LAN ....................................................................................................... 187
Management ........................................................................................ 188
Status ..................................................................................................... 193
Environmental and disposal information ......................... 194
Conformity information ................................................... 194
Troubleshooting .............................................................. 195
Warranty and servicing advice ........................................ 197
134 - English
SilverCrest SWV 300 B2
Introduction
Intended use
English - 135
SilverCrest SWV 300 B2
Supplied items
136 - English
SilverCrest SWV 300 B2
Overview
These operating instructions have a fold-out cover. The dual-band wifi range
extender is illustrated with numbers on the inside cover. The numbers indicate
the following:
1 2.4G signal LED
2 5G signal LED
3 Power/WPS LED
4 Wireless LED
5 LAN LED
6 WPS button
7 Reset button (right side)
8 LAN socket (network socket, RJ-45)
9 Main switch
10 Mode selector
English - 137
SilverCrest SWV 300 B2
LED indicators
138 - English
SilverCrest SWV 300 B2
Technical data
Safety instructions
Before using the device for the first time, please read the following instructions
carefully even if you are familiar with using electronic devices. Store these
instructions in a safe place for future reference. If you pass on the device to
someone else, be sure to always include these instructions as they are an
integral part of the device.
WARNING! This symbol indicates important information for
safe operation of the device and the safety of the user.
Disregarding this information can lead to material damage
and/or health hazards and even death.
English - 139
SilverCrest SWV 300 B2
Operating environment
The device is not designed for use in environments with a high temperature or
humidity (e.g. bathrooms) or in extremely dusty conditions. Operating
temperatures and operating air humidity: 5C to 35C, max. 85% rel.
humidity.
Please always maintain the device at a minimum distance of 20 cm from the
body to avoid exposure to radio radiation.
Ensure that
140 - English
SilverCrest SWV 300 B2
the device is not subjected to any extreme temperature fluctuations as this
could result in condensation and electrical short circuits. If the device was
subjected to extreme temperature fluctuations, however, wait (approx. 2
hours) until the device has reached ambient temperature before use;
the device is never subjected to excessive shocks and vibrations;
the device is never touched with wet hands as there is a risk of an electric
shock;
the device is not covered as there is a risk of fire.
If the aforementioned instructions are not adhered to, it poses a risk to your
health or the device could be damaged.
Operational safety
Only connect the dual-band wifi range extender to a freely accessible socket
so that it can be quickly disconnected from the mains in the event of danger
(smoke, fumes or smell of burning). The socket must always be easily
accessible during operation also.
The main switch (9) of this device does not fully disconnect the device from
the mains. Even if the device is not being used, it consumes minimal power.
Disconnect the dual-band wifi range extender from the mains if the device
will not be used for a prolonged period (e.g. during holidays). This minimises
the risk of fire or smouldering, which always exists when an electrical device
is connected to the mains power supply.
English - 141
SilverCrest SWV 300 B2
Always disconnect the dual-band wifi range extender from the mains power
supply before a storm or thunderstorm if there is the risk of lightning as the
dual-band wifi range extender can be irreparably damaged by high voltage
surges if lightning strikes.
To disconnect the dual-band wifi range extender completely from the power
supply, you must remove its mains plug from the socket.
Never use any adapter plugs or extension cables which are damaged or
which do not comply with valid safety standards.
Cables
Always handle the cables by the connector and do not pull on the cables
themselves. Never place furniture or other heavy objects on the cable and take
care that the cable is not kinked, especially near the plug and connection
sockets. Never make knots in any of the cables or tie them together with other
cables. Ensure that all cables are placed so that no one can trip over them and
they do not cause an obstruction.
Electrical devices do not belong in the hands of children. Persons with physical,
mental or sensory disabilities should also only use electrical devices within the
scope of their abilities. Never allow children or persons with disabilities to use
electrical devices unsupervised unless they have been instructed accordingly or
142 - English
SilverCrest SWV 300 B2
are supervised by a person responsible for their safety. Children should always
be supervised to ensure that they do not play with this device. Small parts can
be fatal if swallowed. Always keep plastic packaging out of reach also
Radio interface
Do not use the device on aircraft, in hospitals, operating rooms or in the vicinity
of medical electronic systems. The transmitted radio waves can impair the
functionality of sensitive devices. Keep the device at least 20cm away from any
pacemakers, since the proper functioning of the pacemaker can be impaired
by radio waves. The transmitted radio waves can cause interference in hearing
aids. Do not place the device in the vicinity of flammable gases or in a
potentially explosive environment (e.g. paint shop) when the radio components
are switched on since the transmitted radio waves can cause an explosion or a
fire. The range of the radio waves is dependent on conditions in the
surrounding environment. In the event of data traffic via a wireless connection,
it is also possible for unauthorised third parties to receive data. Targa GmbH is
not responsible for radio or television interference caused by unauthorised
changes to this device. In addition, Targa assumes no responsibility for the
replacement or exchange of connecting lines and devices not indicated by
Targa GmbH. Only the user himself is responsible for the elimination of
English - 143
SilverCrest SWV 300 B2
interference caused by such unauthorised changes and for the replacement or
exchange of the devices.
Cleaning / maintenance
It is necessary to repair the device if it has been damaged in any way, for
example, if the housing is damaged, if liquid or objects have penetrated the
device or if the product has been exposed to rain or moisture. Repair work is
also required if the device is not working properly or has been dropped. If
smoke is produced, or there are any unusual sounds or smells, the device must
be switched off immediately and its mains plug must be removed from the
socket. In these cases, the device should not be used until it has been inspected
by authorised service personnel. Only have the device repaired by qualified
personnel. Never open the housing of the device. Only use a clean, dry cloth
for cleaning and never use any corrosive liquids. Never try to open the housing
of the device as this would void your warranty.
144 - English
SilverCrest SWV 300 B2
If the device will not be used for a long period of time, disconnect the dual-
band wifi range extender from the mains power supply. Ensure that the storage
temperature remains between -20C and 60C. The air humidity should not
exceed 90% rel. air humidity.
Note: the temperature range and relative air humidity for storage and use are
quite different; please see the information in the "Operating environment"
section.
Copyright
Prior to use
Remove the dual-band wifi range extender and the accessories from the
packaging.
Check the dual-band wifi range extender for signs of damage. The dual-band
wifi range extender must not be used if it is damaged.
English - 145
SilverCrest SWV 300 B2
The dual-band wifi range extender increases the range of your wireless
network. The Dual-Band Mode enables the simultaneous sending and receiving
of 2.4GHz and 5GHz wireless signals. Thus the dual-band wifi range extender
can be used in 2.4GHz and 5GHz wireless networks. The dual-band wifi
range extender supports the following three modes:
Repeater
The range of your wireless network is extended and made available for
2.4GHz and 5GHz wireless networks. Thus wireless devices, which are outside
the range of your wireless network, can be connected to the network via the
dual-band wifi range extender.
Client
You can connect an end device with a LAN interface (for example, computer,
notebook or TV set), which has no own wireless network, to the dual-band wifi
range extender via a LAN cable (network cable). The dual-band wifi range
extender can now connect your end device wirelessly to an existing wireless
router.
As we cannot guarantee compatibility with all devices, please read the
operating instructions for your device.
Access point (AP)
This mode can be used, for example, to provide a router without its own
wireless network as a "wireless router". The router must be connected to the
dual-band wifi range extender via a LAN cable (network cable, see "Supplied
items").
146 - English
SilverCrest SWV 300 B2
First use
Setting mode
Select the desired mode using the mode selector (10). To do so, move the
mode selector (10) to the desired position (Repeater, Client or Access Point).
Repeater Mode
Repeater Mode is used to extend the range of your wireless network. Wireless
devices, which are outside the range of your wireless network, can be
connected to the network via the dual-band wifi range extender.
Range without dual-band wifi range Range with dual-band wifi range
extender extender
The mode selector (10) must be set to the "Repeater" position for Repeater
Mode.
English - 147
SilverCrest SWV 300 B2
Insert the dual-band wifi range extender into a socket that is always easily
accessible.
Then switch on the dual-band wifi range extender by turning the main switch
(9) to the "ON" position. The dual-band wifi range extender requires a certain
amount of time (boot time) after it is switched on before it is ready to use. The
Power/WPS LED (3) lights up permanently as soon as the booting process is
complete.
There are two different ways to configure the dual-band wifi range extender. If
your wireless router supports WPS, you can use this simple function to easily set
up the dual-band wifi range extender. If you would like to use a wireless router
without WPS, you must connect the dual band wifi range extender via network
cable or wireless network to your computer and configure it.
148 - English
SilverCrest SWV 300 B2
WPS - The easiest type of configuration
This is the easiest way to configure the dual-band wifi range extender. First,
check whether your wireless router supports WPS. For further details, please
read the operating instructions for your wireless router.
1. Press the WPS button (6) on the dual-band wifi range extender for at least 6
seconds. The Power/WPS LED (3) now flashes for approx. 2 minutes.
2. Within these 2 minutes, please press the connection button (WPS) on your
wireless router. For further details, please read the operating instructions for
your wireless router.
If your wireless router does not support WPS or the connection fails for some
other reason, you must manually configure the dual-band wifi range extender.
150 - English
SilverCrest SWV 300 B2
Manual configuration
There are two different ways to configure the dual-band wifi range extender.
If you are not using the network default settings and have
manually set an IP address, you must restore the network
settings to Obtain an IP address automatically. For
further details, please read the operating instructions for your
computer.
If the dual-band wifi range extender was previously used in
another network, it might not be accessible any longer at the
default address. In this case, the dual-band wifi range extender
must be reset. See the second point for "The configuration menu
of the dual-band wifi range extender is not shown" in the
"Troubleshooting" section.
1. You can then configure the dual-band wifi range extender via a network
cable. If you want to configure the dual-band wifi range extender via a
network cable, you must connect the dual-band wifi range extender to
your computer. Use the network cable included with the device for this
purpose. Insert one end of the network cable into the LAN socket (8) of
the dual-band wifi range extender and the other end into the LAN socket
of your computer.
2. Alternatively, you can perform the configuration via a wireless network. To
do so, start the search for available wireless networks on your computer.
The network WiFi Repeater(2.4G) or WiFi Repeater(5G) is
displayed in the list of available wireless networks. Select the network
WiFi Repeater(2.4G) or WiFi Repeater(5G) and click on the
English - 151
SilverCrest SWV 300 B2
Connect button to connect wirelessly with the dual-band wifi range
extender. After having pressed the Connect button, you may have to
click the option Connect without configuring the network.
Open the Internet browser on your computer. Enter http://192.168.10.1 in
the address line of the Internet browser and confirm the entry with the Enter
button.
The login window of the dual-band wifi range extender opens. Select the
desired language and enter admin as the user name and password. Then
click on the Submit button. The configuration menu of the dual-band wifi
range extender now opens.
Perform the configuration using the wizard. To do so, click on the Repeater
button in the Wizard field.
152 - English
SilverCrest SWV 300 B2
From the list, select a wireless network whose range you want to extend by
choosing the corresponding network in the "Select" field.
English - 153
SilverCrest SWV 300 B2
After having selected a wireless network, you can then specify any SSID for the
dual-band wifi range extender for Repeater SSID. Enter the network key of
your wireless router for Security key.
154 - English
SilverCrest SWV 300 B2
This will reboot the dual-band wifi range extender.
After the reboot has been completed, the dual-band wifi range extender is
accessible under the SSID and the network key of your wireless router.
English - 155
SilverCrest SWV 300 B2
Client Mode
Client Mode enables end devices with a LAN interface (for example,
computer, notebook or TV set), which have no own wireless network, to
connect wirelessly to an existing wireless router.
Example of use:
The mode selector (10) must be set to the "Client" position for Client Mode.
156 - English
SilverCrest SWV 300 B2
Insert the dual-band wifi range extender into a socket that is always easily
accessible.
Then switch on the dual-band wifi range extender by turning the main switch
(9) to the "ON" position. The dual-band wifi range extender requires a certain
amount of time (boot time) after it is switched on before it is ready to use. The
Power/WPS LED (3) lights up permanently as soon as the booting process is
complete.
There are two different ways to configure the dual-band wifi range extender. If
your wireless router supports WPS, you can use this simple function to easily set
up the dual-band wifi range extender. If you would like to use a wireless router
without WPS, you must connect the dual band wifi range extender via network
cable or wireless network to your computer and configure it.
English - 157
SilverCrest SWV 300 B2
WPS - The easiest type of configuration
This is the easiest way to configure the dual-band wifi range extender. First,
check whether your wireless router supports WPS. For further details, please
read the operating instructions for your wireless router.
1. Press the WPS button (6) on the dual-band wifi range extender for at least 6
seconds. The Power/WPS LED (3) now flashes for approx. 2 minutes.
2. Within these 2 minutes, please press the connection button (WPS) on your
wireless router. For further details, please read the operating instructions for
your wireless router.
If your wireless router does not support WPS or the connection fails for some
other reason, you must manually configure the dual-band wifi range extender.
Manual configuration
There are two different ways to configure the dual-band wifi range extender.
If you are not using the network default settings and have
manually set an IP address, you must restore the network
settings to Obtain an IP address automatically. For
further details, please read the operating instructions for your
computer.
English - 159
SilverCrest SWV 300 B2
If the dual-band wifi range extender was previously used in
another network, it might not be accessible any longer at the
default address. In this case, the dual-band wifi range extender
must be reset. See the second point for "The configuration menu
of the dual-band wifi range extender is not shown" in the
"Troubleshooting" section.
1. You can then configure the dual-band wifi range extender via a network
cable. If you want to configure the dual-band wifi range extender via a
network cable, you must connect the dual-band wifi range extender to
your computer. Use the network cable included with the device for this
purpose. Insert one end of the network cable into the LAN socket (8) of
the dual-band wifi range extender and the other end into the LAN socket
of your computer.
2. Alternatively, you can perform the configuration via a wireless network. To
do so, start the search for available wireless networks on your computer.
The network WiFi Repeater(2.4G) or WiFi Repeater(5G) is
displayed in the list of available wireless networks. Select the network
WiFi Repeater(2.4G) or WiFi Repeater(5G) and click on the
Connect button to connect wirelessly with the dual-band wifi range
extender. After having pressed the Connect button, you may have to
click the option Connect without configuring the network.
Open the Internet browser on your computer. Enter http://192.168.10.1 in
the address line of the Internet browser and confirm the entry with the Enter
button.
The login window of the dual-band wifi range extender opens. Select the
desired language and enter admin as the user name and password. Then
160 - English
SilverCrest SWV 300 B2
click on the Submit button. The configuration menu of the dual-band wifi
range extender now opens.
Perform the configuration using the wizard. To do so, click on the Client button
in the Wizard field.
English - 161
SilverCrest SWV 300 B2
From the list, select a wireless network with which you want to connect the dual-
band wifi range extender by choosing the corresponding network in the
"Select" field.
162 - English
SilverCrest SWV 300 B2
After having selected a wireless network, you must then specify the network key
of your wireless router for Security key.
English - 163
SilverCrest SWV 300 B2
This will reboot the dual-band wifi range extender.
After the reboot has been completed, you can connect the dual-band wifi
range extender to your end device (for example, computer, notebook or TV
set) via a network cable. Use the network cable included with the device for
this purpose. Insert one end of the network cable into the LAN socket (8) of the
dual-band wifi range extender and the other end into the LAN socket of your
end device. Insert the dual-band wifi range extender only into a socket that is
always easily accessible.
164 - English
SilverCrest SWV 300 B2
AP Mode
Use the AP Mode to obtain a "wireless access point". The wireless end devices
will connect to the dual-band wifi range extender in this mode. You can also
use this mode, for example, to make a formerly non-wireless-enabled router
wireless-enabled.
Example of use:
The mode selector (10) must be set to the "Access Point" position for AP Mode.
English - 165
SilverCrest SWV 300 B2
Insert the dual-band wifi range extender into a socket that is always easily
accessible.
Then switch on the dual-band wifi range extender by turning the main switch
(9) to the "ON" position. The dual-band wifi range extender requires a certain
amount of time (boot time) after it is switched on before it is ready to use. The
Power/WPS LED (3) lights up permanently as soon as the booting process is
complete.
There are two different ways to configure the dual-band wifi range extender.
If you are not using the network default settings and have
manually set an IP address, you must restore the network
settings to Obtain an IP address automatically. For
further details, please read the operating instructions for your
computer.
If the dual-band wifi range extender was previously used in
another network, it might not be accessible any longer at the
default address. In this case, the dual-band wifi range extender
must be reset. See the second point for "The configuration menu
166 - English
SilverCrest SWV 300 B2
of the dual-band wifi range extender is not shown" in the
"Troubleshooting" section.
1. You can then configure the dual-band wifi range extender via a network
cable. If you want to configure the dual-band wifi range extender via a
network cable, you must connect the dual-band wifi range extender to
your computer. Use the network cable included with the device for this
purpose. Insert one end of the network cable into the LAN socket (8) of
the dual-band wifi range extender and the other end into the LAN socket
of your computer.
2. Alternatively, you can perform the configuration via a wireless network. To
do so, start the search for available wireless networks on your computer.
The network WiFi Repeater(2.4G) or WiFi Repeater(5G) is
displayed in the list of available wireless networks. Select the network
WiFi Repeater(2.4G) or WiFi Repeater(5G) and click on the
Connect button to connect wirelessly with the dual-band wifi range
extender. After having pressed the Connect button, you may have to
click the option Connect without configuring the network.
Open the Internet browser on your computer. Enter http://192.168.10.1 in
the address line of the Internet browser and confirm the entry with the Enter
button.
The login window of the dual-band wifi range extender opens. Select the
desired language and enter admin as the user name and password. Then
click on the Submit button. The configuration menu of the dual-band wifi
range extender now opens.
English - 167
SilverCrest SWV 300 B2
Perform the configuration using the wizard. To do so, click on the AP button in
the Wizard field.
Enter any SSID for the dual-band wifi range extender for SSID. Select an
encryption for Security type to protect your network against unauthorised
access. You can also set up the network as unsecured by selecting the
Disable option. However, we would recommend that you set up an
encryption.
168 - English
SilverCrest SWV 300 B2
After having selected an encryption, you must then specify a network key for
Security key. Take particular note of the network key or keep it in a safe
place.
English - 169
SilverCrest SWV 300 B2
This will reboot the dual-band wifi range extender.
After the reboot has been completed, the dual-band wifi range extender is
accessible under the SSID and the network key.
170 - English
SilverCrest SWV 300 B2
WPS - Connect to the AP
This is the easiest way to establish a connection to the AP. First, check whether
your end device supports WPS. For further details, please read the operating
instructions for your end device.
1. Press the WPS button (6) on the dual-band wifi range extender for 3
seconds. The Power/WPS LED (3) now flashes for approx. 2 minutes.
2. Within these 2 minutes, please press the connection button (WPS) on your
end device. For further details, please read the operating instructions for your
end device.
Your end device then automatically connects to your dual-band wifi range
extender (AP) and applies all of the settings. Once the connection has been
successfully established, the 2.4G signal LED (1) or the 5G signal LED (2) lights
up. You can then access the dual-band wifi range extender (AP) wirelessly.
If your end device does not support WPS, you can also manually establish the
connection to the dual-band wifi range extender (AP).
English - 171
SilverCrest SWV 300 B2
Manual connection to the AP
For a manual connection to the dual-band wifi range extender (AP), you must
find available wireless networks on your end device. The dual-band wifi range
extender (AP) is displayed under the SSID you specified in the list of available
wireless networks. Then select the corresponding SSID to connect your end
device wirelessly with the dual-band wifi range extender (AP). Then enter the
network key you assigned. For further details, please read the operating
instructions for your end device.
If you are not using the network default settings and have
manually set an IP address, you must restore the network
settings to Obtain an IP address automatically. For
further details, please read the operating instructions for your
computer.
172 - English
SilverCrest SWV 300 B2
If the dual-band wifi range extender was previously used in
another network, it might not be accessible any longer at the
default address. In this case, the dual-band wifi range extender
must be reset. See the second point for "The configuration menu
of the dual-band wifi range extender is not shown" in the
"Troubleshooting" section.
1. You can establish the connection via a network cable or via a wireless
network. If you want to establish the connection via a network cable, you
have to connect the dual-band wifi range extender to your computer. Use
the network cable included with the device for this purpose. Insert one end
of the network cable into the LAN socket (8) of the dual-band wifi range
extender and the other end into the LAN socket of your computer.
2. Alternatively, you can establish the connection via the wireless network. To
do so, start the search for available wireless networks on your computer.
The network WiFi Repeater(2.4G) or WiFi Repeater(5G) is
displayed in the list of available wireless networks. Select the network
WiFi Repeater(2.4G) or WiFi Repeater(5G) and click on the
Connect button to connect wirelessly with the dual-band wifi range
extender. After having pressed the Connect button, you may have to
click the option Connect without configuring the network.
After you have established the connection as previously described, open the
Internet browser on your computer. Enter http://192.168.10.1 in the
address line of the Internet browser and confirm the entry with the Enter
button.
English - 173
SilverCrest SWV 300 B2
The login window of the dual-band wifi range extender opens. Select the
desired language and enter admin as the user name and password. Then
click on the Submit button.
174 - English
SilverCrest SWV 300 B2
The configuration menu of the dual-band wifi range extender now opens.
You can close the configuration menu by clicking on the Log off button on the
top right of the display. The configuration menu is divided into the following
headings:
Wizard
This Wizard enables the easy configuration of your dual-band wifi range
extender. The currently set mode (Repeater, Client or AP) is displayed here. To
start the Wizard, click on the Repeater, Client or AP button. Follow the on-
screen instructions of the Wizard.
English - 175
SilverCrest SWV 300 B2
Wireless Info
Information about the wireless network of the dual-band wifi range extender is
displayed here.
Status
The current status of the dual-band wifi range extender is displayed here.
Connected to
This displays which wireless device is connected to the dual-band wifi range
extender.
2.4G SSID
The SSID (wireless name) in the 2.4G band of the dual-band wifi range
extender is displayed here.
Channel
The channel in the 2.4G band, which is used by the dual-band wifi range
extender, is displayed here.
5G SSID
The SSID (wireless name) in the 5G band of the dual-band wifi range extender
is displayed here.
Channel
The channel in the 5G band, which is used by the dual-band wifi range
extender, is displayed here.
WiFi
You can make additional settings for the wireless network here. To do so, click
on the desired option.
176 - English
SilverCrest SWV 300 B2
Basic settings (2.4G / 5G)
This option is available for the 2.4G and 5G band.
English - 177
SilverCrest SWV 300 B2
Channel
Here, you can select a channel which is to be used by the dual-band wifi range
extender. Use the Auto option if the channel is to be selected automatically by
the dual-band wifi range extender.
Security type
Set an encryption for the network here.
Click on the Apply button to confirm changed settings.
178 - English
SilverCrest SWV 300 B2
Advanced (2.4G / 5G)
This option is available for the 2.4G and 5G band.
This option should only be used by experienced users. Network settings can be
made here. As the settings have to be customised to your network, they will not
be discussed further here. You can obtain more information via our service
hotline (see page 198).
Click on the Apply button to confirm changed settings.
English - 179
SilverCrest SWV 300 B2
WDS (2.4G / 5G)
This option is available for the 2.4G and 5G band.
Please note that WDS is not enabled by default, but must first be enabled
manually.
You can manually configure WDS (Wireless Distribution System) here. Multiple
Wireless APs can be connected together using WDS (Wireless Distribution
System) and combined under one SSID in order to achieve greater network
coverage.
180 - English
SilverCrest SWV 300 B2
Settings may also need to be made on the other network
devices. For further details, please read the operating
instructions for your device.
Enable WDS
Set the check mark to enable WDS (Wireless Distribution System).
WDS Settings MAC address
Enter here the MAC address of the AP which is to be connected to the dual-
band wifi range extender.
WDS Settings - Channel
Here, you select a channel which is to be used by the dual-band wifi range
extender. Note that the channel has to be the same for all APs. If you do not
know which channel is used by your other device, check its settings. For further
details, please read the operating instructions for the relevant device.
WDS Settings - Comment
Here, you can enter a comment.
Security Setting - Encryption
Select an encryption for the network here. Once the encryption has been
selected, you can add more information about the encryption and specify the
network key. Note that the encryption has to be the same for all APs. It is best if
you copy the existing encryption of your wireless network.
Click on the Apply button to confirm changed settings.
English - 181
SilverCrest SWV 300 B2
Schedule (2.4G / 5G)
This option is available for the 2.4G and 5G band.
Here, you can set a timer for the wireless network to turn it on and off
automatically. To do so, click on the Disabled/Enable button. If the
Enabled/Disable button is green, the timer for the wireless network is
enabled. If the Disabled/Enable button is grey, the timer for the wireless
network is disabled.
182 - English
SilverCrest SWV 300 B2
Once the timer for the wireless network is enabled, you can set up to 10 rules.
To enable a rule, click on the relevant box in the Enable column. In the
relevant row, select the desired day or Everyday for every day. Then specify
the period of time when the wireless network is to be turned on.
Click on the Apply button to confirm changed settings.
English - 183
SilverCrest SWV 300 B2
WPS
WPS Enable
WPS is enabled in the original condition of the device. You can enable or
disable WPS here. To do so, click on the Enabled/Disable button. The dual-
band wifi range extender is then rebooted directly. WPS is enabled if the
Enabled/Disable button is green. WPS is disabled if the
Disabled/Enable button is grey. Please note that when WPS is disabled,
there can be no connection to the wireless device via WPS. The WPS button
(6) on the dual-band wifi range extender does not work also.
184 - English
SilverCrest SWV 300 B2
PIN
The WPS PIN of the dual-band wifi range extender is displayed here. You can
use this WPS PIN to connect the dual-band wifi range extender to your wireless
router. To do so, your wireless router must support the WPS PIN method. Enter
the WPS PIN on your wireless router. For further details, please read the
operating instructions for your wireless router. The dual-band wifi range
extender then automatically connects to your wireless router and copies all of
the settings. Once the connection has been successfully established, the 2.4G
signal LED (1) or the 5G signal LED (2) lights up. The dual-band wifi range
extender can then be used.
Register WPS
Here, you can connect the dual-band wifi range extender to a WPS-enabled
end device in the 2.4G or 5G band. Click on the Start PBC button to start
WPS. The Power/WPS LED (3) of the dual-band wifi range extender now
flashes for approx. 2 minutes. Within these 2 minutes, please press the
connection button (WPS) on your end device. For further details, please read
the operating instructions for your end device. The dual-band wifi range
extender then automatically connects to your end device. Once the connection
has been successfully established, the 2.4G signal LED (1) or the 5G signal
LED (2) lights up. The dual-band wifi range extender can then be used. You
can stop WPS by clicking on the Stop PBC button.
Select Band
Here you can select for which band, 2.4G or 5G, WPS is to be performed.
English - 185
SilverCrest SWV 300 B2
Register WPS
Here, you can connect the dual-band wifi range extender to a WPS-enabled
wireless router in the previously selected 2.4G or 5G band. Click on the Start
PBC button to start WPS. The Power/WPS LED (3) of the dual-band wifi range
extender now flashes for approx. 2 minutes. Within these 2 minutes, please
press the connection button (WPS) on your wireless router. For further details,
please read the operating instructions for your wireless router. The dual-band
wifi range extender then automatically connects to your wireless router and
copies all of the settings. Once the connection has been successfully
established, the 2.4G signal LED (1) or the 5G signal LED (2) lights up. The
dual-band wifi range extender can then be used. You can stop WPS by
clicking on the Stop PBC button.
WPS Status
The current WPS status of the dual-band wifi range extender is displayed here.
The following indicators are possible: Idle The WPS scan was not started
yet, Started The WPS scan was started, Failed The WPS connection
failed, Successful The WPS connection has been successfully established
and Timeout! The WPS connection could not be established due to the
timeout.
186 - English
SilverCrest SWV 300 B2
LAN
The IP address used, the set DHCP Mode and the MAC address of the dual-
band wifi range extender are displayed here. Click on the LAN button to
adjust the network settings.
IP address
You can change the IP address of the dual-band wifi range extender here.
DHCP
You can set the DHCP Mode here. The following options can be selected:
Disable, Server and Auto. The Server option is enabled in the original
condition of the device. With the Server option, IP addresses are assigned
automatically, which is recorded in a table. This is in contrast to the Auto
option where the automatic assignment is permanent and will not be removed.
The advantage here is that an end device always has the same IP address. The
disadvantage is that new end devices do not receive an IP address if the
English - 187
SilverCrest SWV 300 B2
address range is completely assigned, even if IP addresses are no longer
actively used.
Click on the Apply button to confirm changed settings or on Cancel to
discard the changed settings.
Management
Here, you can make additional settings or install a new firmware version. Click
on the Management button or directly on the desired option:
188 - English
SilverCrest SWV 300 B2
Password
Here, you can change the preset password (admin) for the login to the dual-
band wifi range extender. To do so, enter a user name and then enter the new
password twice.
English - 189
SilverCrest SWV 300 B2
Time zone settings
You can set the date and time here. Enter the date and time manually or click
on the Copy computer time button to copy the date and time from the
computer.
190 - English
SilverCrest SWV 300 B2
Save/Reload settings
You can save, load and reset the configuration of the dual-band wifi range
extender here.
Click on the Save... button to save the configuration of the dual-band wifi
range extender to a file on your computer.
To select a backed-up configuration, click on the Browse... button and then
select the desired configuration file on your computer. Now click on the
Upload button to load the previously selected configuration file.
Click on the Load default button to reset the dual-band wifi range extender
to the factory default settings. Confirm the following confirmation prompt with
OK to finally load the factory default settings or click Cancel to cancel the
process.
English - 191
SilverCrest SWV 300 B2
Upgrade firmware
If you have received a new firmware version, you can install it. To do so, click
on the Browse... button and then select the new firmware version on your
computer. Then follow the on-screen instructions to install the firmware version.
192 - English
SilverCrest SWV 300 B2
Reboot Device
The dual-band wifi range extender can be rebooted here.
Status
The firmware version used, the operating time since it was last turned on, and
the release date of the installed firmware version of the dual-band wifi range
extender are displayed here. Click on the Status button to display additional
information. Detailed information on the system, WLAN 5G, WLAN 2.4G and
LAN is then displayed.
English - 193
SilverCrest SWV 300 B2
Conformity information
194 - English
SilverCrest SWV 300 B2
Troubleshooting
You can solve most problems yourself using the following table. If the problem
still persists after you have worked through these approaches, contact our
service hotline (see page 198). Do not perform any repairs personally!
The Power/WPS LED (3) does not light up.
Check whether the main switch (9) is in the "ON" position.
Socket defective or fuse tripped; use another device to check the socket.
No wireless connection to the wireless router
The distance to the wireless router is too great, thus reduce it.
The router's wireless function is disabled; enable the wireless function.
No LAN connection
Check whether the network cable is inserted correctly into the LAN socket (8)
of the dual-band wifi range extender and into the LAN socket of your end
device.
Use a different network cable to exclude a fault in the network cable.
Connection with the WPS button fails
Establish the connection with the WPS button again.
Reset the dual-band wifi range extender to its original condition. After
pressing the reset button (7) for at least 10 seconds with a sharp object, the
dual-band wifi range extender restarts a few seconds after you release the
button. You can identify this from the fact that the LEDs briefly go out and
then come on again after a few seconds. Then establish the connection with
the WPS button again.
English - 195
SilverCrest SWV 300 B2
Eliminate sources of interference between the dual-band wifi range extender
and the wireless router.
The distance between the dual-band wifi range extender and the wireless
router is too great, thus reduce it.
The configuration menu of the dual-band wifi range extender is
not shown.
The IP address http://192.168.10.1 was entered into the address line of the
Internet browser incorrectly; check and correct the entry.
The dual-band wifi range extender has already been configured and is using
another IP address. Reset the dual-band wifi range extender to its original
condition. After pressing the reset button (7) for at least 10 seconds with a
sharp object, the dual-band wifi range extender restarts a few seconds after
you release the button. You can identify this from the fact that the LEDs briefly
go out and then come on again after a few seconds.
196 - English
SilverCrest SWV 300 B2
English - 197
SilverCrest SWV 300 B2
Service
Phone: 01 242 15 83
E-Mail: service.IE@targa-online.com
E-Mail: service.CY@targa-online.com
IAN: 93826
Manufacturer
TARGA GmbH
Coesterweg 45
59494 SOEST
GERMANY
198 - English
SilverCrest SWV 300 B2
English - 199