Sunteți pe pagina 1din 1

LDPE L2102TN42

Low Density Polyethylene


Typical Data
Properties Value Unit Test Method
Polymer Properties
Melt Flow Rate 1.9 dg/min ISO 1133
Density 921 kg/m ISO 1183 (A)
Optical Properties
Gloss (45) 53 % ASTM D 2457
Haze 11 % ASTM D 1003A
Clarity 28 mV DSM method
Formulation Level
Slip 500 E ppm DSM method
Anti-block 2300 ppm DSM method
Anti-oxidant - Processing aid (PPA) -
Mechanical Properties
Impact strength 18 kJ/m ASTM D 4272
Tear strength TD 22 kN/m
Tear strength MD 72 kN/m
Tensile test
Yield stress TD 11 MPa
Yield Stress MD 12 MPa
Tensile Stress at break TD 18 MPa
Tensile Stress at break MD 32 MPa
Strain at break TD >500 %
Strain at break MD >100 %
Modulus of elasticity TD 200 MPa
Modulus of elasticity MD 200 MPa
Coefficient of friction 0.1 ASTM D 1894
Blocking <5 g
Re-Blocking 30 g

* Film properties have been measured at 25m films.


General Information
DSM produces low density polyethylene by the tubular and the autoclave reactor processes. As a result the
product range covers a wide variety of densities and melt flow rates. Further it includes a large number of
grades with excellent optical properties which yield firm with a high to very high clarity.
Finally there is a wide variety of additives. For example, several grades contain the slip agent erucamide
.Films produced from these materials have excellent surface properties and very low odor and taste levels,
which is of advantage in e.g. food packaging. Purchased from us. Nothing herein is intended to be nor shall
it constitute a warranty whatsoever, in particular, warranty of merchantability or fitness for a particular
purpose.

S-ar putea să vă placă și