Documente Academic
Documente Profesional
Documente Cultură
Introduction:
XBee interfacing module is used to interface XBee wireless module to any development
board with ease because of simple relimate connection. It has onboard 3.3V low drop
voltage regulator and LED indicators for RSSI, Associate and Power. Connections to RX,
TX, VIN and GND of the XBee Adaptor module are available directly on the relimate. It
can be directly connected to development boards via relimate connector.
Although it can support any XBee module having similar pin configuration we have used
this module extensively with the following XBee modules:
Note: XBee interfacing module comes without XBee wireless module. You need to buy
XBee wireless module separately.
NEX Robotics Pvt. Ltd. and ERTS Lab IIT Bombay, INDIA 1
XBee Interfacing Module Manual
Specifications
Power: 5 to 12V DC
LED indication: RSSI, Associate, Power
Onboard 3.3V low drop voltage regulator for power to the XBee wireless module.
Connections to Receive, Transmit, GND, VIN pins of the XBee wireless module
are available on relimate connector.
NEX Robotics Pvt. Ltd. and ERTS Lab IIT Bombay, INDIA 2
XBee Interfacing Module Manual
Notice
The contents of this manual are subject to change without notice. All efforts have been made to ensure
the accuracy of contents in this manual. However, should any errors be detected, NEX Robotics
welcomes your corrections. You can send us your queries / suggestions at
info@nex-robotics.com
Content of this manual is released under the Creative Commence cc by-nc-sa license.
For legal information refer to:
http://creativecommons.org/licenses/by-nc-sa/3.0/legalcode
Recycling:
Almost all the part of this product are recyclable. Please send this product to the recycling plant after
its operational life. By recycling we can contribute to cleaner and healthier environment for the future
generations.
NEX Robotics Pvt. Ltd. and ERTS Lab IIT Bombay, INDIA 3