Documente Academic
Documente Profesional
Documente Cultură
Product Data
Type
Insulating Firebrick
Features
Low thermal conductivity
Gives good thermal insulation, enabling the use of thin-walled construction.
Low heat storage
Due to their light weight and low thermal conductivity, CJM bricks absorb minimal heat, giving
significant energy savings in cyclically-operated kilns.
Purity
The very low iron and alkali flux content confers good refractoriness and the high alumina
content contributes to their stability in reducing atmosphere.
High hot compressive strength
The accurate dimension
Enable the bricks to be laid more quickly, with thin, uniform joints, allowing the construction of
strong and stable structures.
Typical Applications
Recommended for use as primary hot face refractory lining or as back-up insulation behind other
refractories in furnaces, kilns, flues, refining vessels and heaters, regenerators, gas producers and main
soaking pit, stress relieving furnaces, reactor chambers and similar high temperature industrial equipment.
The physical and/or chemical properties and specifications of the product set form above represent typical average results obtained in accordance with
generally accepted standard test methods conducted under controlled conditions, and are subject to normal manufacturing variations. CJM reserves the
right to modify the properties and specifications at any time withour prior notice.
NO WARRANTY IS EXPRESSED OR IMPLIED REGARDING, THE ACCURACY OF THIS INFORMATION. THE SUITABILITY OF THIS
PRODUCT FOR A PARTICULAR PURPOSES OR THE RESULTS TO BE OBTAINED BY THE USE OF PRODUCT. USER EXPRESSLY
ASSUME ALL RISK AND LIABILITIES ARISING FROM THE USE OF OR RELIANCE UPON THIS INFORMATION.