Documente Academic
Documente Profesional
Documente Cultură
[2] Tsoukalas LH, Uhrig RE. Fuzzy and neural approaches in engineering. New York: Wiley; 1997.
[3] Rai N, Pitchumani R. Rapid cure simulation using artificial neural networks. Compos Part A
1997; 28:84759.
[4] Lee JA, Almond DP, Harris B. The use of neural networks for the prediction of fatigue lives of
composite materials. Composites Part A 1999; 30:115969.
[5] Luo J, Liang Z, Zhang C, Wang B. Optimum tooling design for resin transfer molding with virtual
manufacturing and artificial intelligence. Composites Part A 2001; 32:87788.
[7] Heider D, Piovoso MJ, Gillespie Jr JW. A neural network model-based open-loop optimization
for the automated thermoplastic composite tow-placement system. Composites Part A 2003;
34:7919.
[8] Cho JR, Shin SW. Material composition optimization for heatresisting FGMs by artificial neural
network. Composites Part A 2004; 35:58594.
[9] Zhang Z, Friedrich K. Artificial neural network applied to polymer composite: a review. Compos
Sci Technol 2003; 63:202944.
[10] Kumar A, Hand VC. Feasibility of using neural networks and genetic algorithms to predict and
optimize coated paper and board brightness. Ind Eng Chem Res 2000; 39:495662.
[11] Milosavljevic N, Heikkila P. Modeling a scrubber using feed-forward neural networks. Tappi J
1999; 82(3):197201.
[12] Masmoudi RA. Rapid prediction of effluent biochemical oxygen demand for improved
environmental control. Tappi J 1999;82(10): 1119.
[13] Miyanishi T, Shimada H. Using neural networks to diagnose web breaks on a newsprint paper
machine. Tappi J 1998;81(9): 16370.
[14] Hagan MT, Debnath HB, Beale M. Neural network design. Boston, MA, USA: PWS Publishing
Company; 1995.
Ficha de Trabajo Carga [14]
NEGRO, ALONSO, 500 Ciencias Puras
BLANCO Y TIJERO Times New Roman