Documente Academic
Documente Profesional
Documente Cultură
Truck Group
GM General Motors
Truck Group
DIMENSIONAL
ENGINEERING
Based on the ASME Y14.5M-
1994 Dimensioning and
Tolerancing Standard
as amended by the GM Global
Addendum-1997
GM General Motors
Truck Group
-
through the entire Four Phase Vehicle Development
Straightness
For Flatness
Individual Form
Features Circularity (roundness)
Cylindricity
For Profile of a Line
Individual Profile
or Related Profile of a Surface
Features
Angularity
Orientation Perpendicularity
Parallelism
For Position
Related
Features Location Concentricity
Symmetry
Circular Runout *
Runout
Total Runout *
Diameter Symbol
1 A BC
Tolerance
Value
Tertiary
Primary
Geometric Datum
Datum
Characteristic
Symbol Secondary
Datum
Tolerance Material
Condition Symbol
Diameter Datum Material
Symbol Condition Symbol
1M A BM C
As required, additional symbols are used along with the basic feature control
frame to identify specific geometric or dimensional requirements. The above
example shows a diameter symbol and two maximum material condition (MMC)
symbols that have been added to precisely describe the feature requirements.
The diameter symbol describes the cylindrical shape of the feature tolerance
zone while the maximum material condition symbols indicate both the feature
and secondary datum material condition in which the stated tolerance applies.