Documente Academic
Documente Profesional
Documente Cultură
Quora
1
AskorSearchQuora AskQuestion Read Answer Notifications Vijay
ReinforcedConcreteDesign +6
Havethisquestiontoo?RequestAnswers: Doyouhavethecalculationdesignexample(spread
sheet/PDF)ofdeflectionofcantileverslab?
RequestFromQuora
Wewilldistributethisquestiontowriters,andnotifyyouaboutnewanswers. Whattypeofbarbendingisrequiredforacantilever
slabof8feet?
KarthickMolleti,studiedCivilEngineeringatSrinivasaInstituteofEngineering&
Technology Whatisthedifferenceandsimilarityofcantileverslab
5AnswersinCivilEngineering andcantileverbeam?
RuchikaLalit,B.TechCivilEngineering,NirmaUniversity(2013) Howdowedesigncantileverbeam?
5AnswersinCivilEngineering
Whatarethetypicalreinforcementdetailsofa
cantileverslab?
AravindNatarajan,Structuralengineerinthemaking
107AnswersinCivilEngineering HowcanIestimateacantileverslab?
ViewMoreorSearch Iscantileverbeamorslabsafe?
HowdoIprovidesupportfor7mlongcantilevered
slab?
4Answers
Whatisthedifferencebetweenanedgebeamwitha
Praveen VP, M.Sc Civil Engineering, National University of Singapore cantileverslabandanedgebeamwithoutacantilever
slab?
AnsweredMar2 Vijay,discovermoreuniqueinsightson
Provisions in the code of practices vary from region to region. For instance, load factors, Quora. MoreRelatedQuestions
durability requirements etc. varies. Hence instead of providing a sample calculations Keepreading
QuestionStats
https://www.quora.com/Howcanwedesignacantileverslab 1/7
5/26/2017 Howcanwedesignacantileverslab?Quora
indicating the step by step procedure to design a cantilever slab, let me share some of the 1 16PublicFollowers
AskorSearchQuora AskQuestion Read Answer Notifications Vijay
basic principles to design a cantilever slab. 9,455Views
LastAskedMar1
a) Cantilever slabs must be designed to the hogging moment occurring at the support
1MergedQuestion
between the cantilever span and adjacent continuous span.
Edits
b) For cantilever slabs, reinforcement at the top is the main reinforcement.
c) All cantilever slab spans must have a back span i.e. an adjacent continuous span (see
gure below)
Vijay,discovermoreuniqueinsightson
Quora.
Keepreading
https://www.quora.com/Howcanwedesignacantileverslab 2/7
5/26/2017 Howcanwedesignacantileverslab?Quora
1
AskorSearchQuora AskQuestion Read Answer Notifications Vijay
d) Top rebar from the cantilever slab span must extend into the adjacent continuous
span atleast for a length which is greatest of the following:
Vijay,discovermoreuniqueinsightson
1.5 times the length of cantilever
Quora.
tension anchorage length
Keepreading
0.3 times the length of adjacent continuous span
https://www.quora.com/Howcanwedesignacantileverslab 3/7
5/26/2017 Howcanwedesignacantileverslab?Quora
2.8kViews9Upvotes
Upvote 9 Downvote
Cantilever slabs are a typical one way slabs. They are projections from wall face of
lintel beams or oor slabs.
Even while designing they are considered as one-slabs with cantilever xed or
continuous at supports. The trial depth is selected based on span/depth ratio of 7, as
in IS:456.
The reinforcement provided at the tension face should be checked for anchorage
length near supports. The thickness of such slabs is varied from max. at the xed end
to the min. of 100 to 150 mm at the free end. Distribution steel should be provided at
the transverse direction.
https://www.quora.com/Howcanwedesignacantileverslab 4/7
5/26/2017 Howcanwedesignacantileverslab?Quora
1
AddAskorSearchQuora
a comment... AskQuestion
Recommended All Read Answer Notifications Vijay
PromotedbyHTMedia
Post your resume to get hired by global IT companies.
Top IT companies like Wipro, IBM and TCS are seeking talent. Competitive salaries.
Join now.
Applynowatshine.com
2. Identify the loads expected to act on the structure during its expected
lifetime.
3. Analyse the structure for the identied loads and determine support
reactions and internal forces, such as, axial force, shear force, bending
moment at dierent locations of all the members of the structure.
4. Design each member one by one. Design of a member depends one the
predominant structural action to which the member is subjected. Based on
this, a member could be categorized as:
Vijay,discovermoreuniqueinsightson
Quora.
a. Axially loaded member (in either compression or tension, with or without
Keepreading
bending)
https://www.quora.com/Howcanwedesignacantileverslab 5/7
5/26/2017 Howcanwedesignacantileverslab?Quora
6. Identify critical section or sections and then proportion the cross section to
have a capacity equal to or greater than the design force at the section
1kViews7UpvotesAnswerrequestedbySourabhKataria
Upvote 7 Downvote
Yes we can design a cantilever beam but there cannot be much span as in simply
supported beams. You can get reason by following example.
https://www.quora.com/Howcanwedesignacantileverslab 6/7
5/26/2017 Howcanwedesignacantileverslab?Quora
1
AskorSearchQuora AskQuestion Read Answer Notifications Vijay
2AnswersCollapsed(Why?)
Vijay,discovermoreuniqueinsightson
Quora.
Keepreading
https://www.quora.com/Howcanwedesignacantileverslab 7/7