Documente Academic
Documente Profesional
Documente Cultură
Technical features
Medium: Orifice: Fluid/Ambient temperature: Materials:
Filtered, non-lubricated and DN 6 or DN 8 Valve: Body: aluminium 3.0615 with
dried compressed air, instru- Port size:: -40 ... +65C (NBR) (-40...+149F) surface treatment for critical
ment air, G 1/4, 1/4 NPT, G 1/2, 1/2 NPT, -25 ... +80C (HNBR) environmantal conditions
nitrogen and other non- NAMUR-Flange (-13...+176F) (approved according to DIN 50018:
flammable neutral, dry fluids Operating pressure: Depending on solenoid system Condensate test with alternating
Operation: 2,5 ... 8 (36 ... 116 psi) Air supply must be dry enough temperatures in sulphuric
Indirect solenoid operated with internal air supply to avoid ice formation at atmosphere,
spool valves 0 ... 8 bar (0 ... 116 psi) with ex- temperatures below +2C DIN 50021/ASTM B117-73:
Mounting position: ternal air supply (G1/2, 1/2 NPT (+35F). Salt spray test with different
Optional, impuls valves or low power pilot system only) Installed in the open protect all sodium chloride solutions,
preferably horizontally connections against the tested in ammonia atmosphere),
penetration of moisture! brass 2.0401 (Ms 58)
stainless steel 1.4404 (316 L)
Seals:
NBR (special perbunan) or
HNBR
11/12 Our policy is one of continued research and development. We therefore reserve the right to amend,
without notice, the specifications given in this document.
N/en/en 5.4.335.01
97105 NAMUR
3/2, 5/2 and 5/3 way valves with seals NBR -40 ... +65C*3
Housing: aluminium anodized
Symbol Ports Actuation Operating pressure Flow *6) Test certification Weight Dimension Model *1)
1, 3, (5) 2, 4 (bar) (l/min) IEC 61508 *2) (kg) No.
G 1/4 Flange Solenoid/spring 2,5...8 1300 x 0,45 1 9710505
4 2 4 2
1/4 NPT Flange Solenoid/spring 2,5...8 1300 x 0,45 1 9710515
Housing: brass
5 13
Symbol Ports Actuation Operating pressure Flow *6) Test certification Weight Dimension Model *1)
1, 3, (5) 2, 4 (bar) (l/min) IEC 61508 *2) (kg) No.
G 1/4 Flange Solenoid/spring 2,5...8 1300 x 1,00 1 9710605
4 2 4 2
1/4 NPT Flange Solenoid/spring 2,5...8 1300 x 1,00 1 9710615
5 13 513
Housing: stainless
5 13
5 1 steel
Symbol Ports Actuation Operating pressure Flow *6) Test certification Weight Dimension Model *1)
1, 3, (5) 2, 4 (bar) (l/min) IEC 61508 *2) (kg) No.
G 1/4 Flange Solenoid/spring 2,5...8 1300 x 1,00 1 9710705
4 2 4 2
1/4 NPT Flange Solenoid/spring 2,5...8 1300 x 1,00 1 9710715
5 13 513
*1) When ordering please indicate solenoid, voltage and current (frequency)
*2) Since May 2008, Date code A8192
*3) For operation in plants according to IEC 61511/61508 -40 ... +40C see test certificate (on request)
*6) Flow characteristics conforms to ISO6358 [6 5 bar]
Note for *6): Connecting pipe/fitting: In order to ensure and a pressure collapse avoid the flow, the supply air cross section should with 1/4: 8 mm; with
1/2: 10 mm. With smaller cross section the inlet (A1) should more largely, however at least equally large line at the port (A2; A1).
N/en/en 5.4.335.02 Our policy is one of continued research and development. We therefore reserve the right to amend,
without notice, the specifications given in this document.
11/12
97105 NAMUR
3/2, 5/2 and 5/3 way valves with seals HNBR -25 ... +80C *3)
Housing: aluminium anodized
Symbol Ports Actuation Operating pressure Flow *6) Test certification Weight Dimension Model *1)
1, 3, (5) 2, 4 (bar) (l/min) IEC 61508 *2) (kg) No.
G 1/4 Flange Solenoid/spring 2,5...8 1300 x 0,45 1 9710205
4 2 4 2
1/4 NPT Flange Solenoid/spring 2,5...8 1300 x 0,45 1 9710215
M M
Housing: aluminium anodized, Inlet
V filter
B EM and exhaust guard
-53A EMH
Symbol Ports Actuation Operating pressure Flow *6) Test certification Weight Dimension Model *1)
1, 3 (5) 2, 4 (bar) (l/min) IEC 61508 *2) (kg) No.
5 1 3 5 1 3
5 1 3 5 3
1
Housing: brass
Symbol Ports Actuation Operating pressure Flow *6) Test certification Weight Dimension Model *1)
1, 3, (5) 2, 4 (bar) (l/min) IEC 61508 *2) (kg) No.
G 1/4 Flange Solenoid/spring 2,5...8 1300 x 1,00 1 9710305
4 2 M4 2
1/4 NPT Flange Solenoid/spring 2,5...8 1300 x 1,00 1 9710315
5 13 513
Housing: Stainless
5 3 51
steel
Symbol Ports Actuation Operating pressure Flow *6) Test certification Weight Dimension Model *1)
1, 3, (5) 2, 4 (bar) (l/min) IEC 61508 *2) (kg) No.
G 1/4 Flange Solenoid/spring 2,5...8 1300 x 1,00 1 9710405
4 2 4 2
1/4 NPT Flange Solenoid/spring 2,5...8 1300 x 1,00 1 9710415
5 13 513
*1) When ordering please indicate solenoid, voltage and current (frequency)
*2) Since May 2008, Date code A8192
*3) For operation in plants according to IEC 61511/61508 61508 -25 ... +65C or 0...+80C see test certificate (on request)
*4) Test certificate without inlet filter and exhaust guard
*6) Flow characteristics conforms to ISO6358 [6 5 bar]
Note for *6): Connecting pipe/fitting: In order to ensure and a pressure collapse avoid the flow, the supply air cross section should with 1/4: 8 mm; with
1/2: 10 mm. With smaller cross section the inlet (A1) should more largely, however at least equally large line at the port (A2; A1).
11/12 Our policy is one of continued research and development. We therefore reserve the right to amend,
without notice, the specifications given in this document.
N/en/en 5.4.335.03
97105 NAMUR
N/en/en 5.4.335.04 Our policy is one of continued research and development. We therefore reserve the right to amend,
without notice, the specifications given in this document.
11/12
97105 NAMUR
Solenoid operators
Power consumption Rated current ATEX- Protection class *7)/ Temperature Electrical Weight Dimension Circuit Model
Category Ex-Protection class Ambient/ connection diagram
24 V d.c. 230 V a.c. 24 V d.c. 230 V a.c. Fluid
(W) (VA) (m A) (m A) (C) (kg) No. No.
1,9 2,1 *5) 78 10 IP00 without connector *5) -25 ... +60 DIN EN 175 301-803 0,3 7 1/5 0763
IP65 with connector *5) Form A
3,6 - 150 - II2G Ex mb II T4 *1) -20 ... +70 3 m Cable 0,4 9 4 0298 *8)
II2D
Ex tD A21 IP66 T110
- 4,6 - 18 II2G Ex mb II T4 *1) -20 ... +70 3 m Cable 0,4 9 7 0299 *8)
II2D
Ex tD A21 IP66 T110
0,8 - 33 - II2G Ex e mb IIC T5/T6 Gb -40 ... +80 T5 M20 X 1,5 *6) 0,6 10 4 4200 *8)
II2D -40 ... +70 T6
Ex tb IIIC T130C Db IP66 *2), *10) -40 ... +80
- 1,3 - 6 II2G Ex e mb IIC T5/T6 Gb -40 ... +80 T5 M20 X 1,5 *6) 0,6 10 7 4201 *8)
II2D -40 ... +70 T6
Ex tb IIIC T130C Db IP66 *2), *10) -40 ... +80
0,8 - 33 - II2G Ex d mb IIC T5/T6 Gb -40 ... +80 T5 1/2 NPT *6) 0,8 17 20 4600 *8)
II2D Ex e mb IIC T5/T6 Gb -40 ... +70 T6
Ex tb IIIC T130C Db IP66 *3), *10) -40 ... +80
0,8 - 33 - II2G Ex d mb IIC T5/T6 Gb -40 ... +80 T5 M20 X 1,5 *6) 0,8 17 21 4602 *8)
II2D Ex e mb IIC T5/T6 Gb -40 ... +70 T6
Ex tb IIIC T130C Db IP66 *3), *10) -40 ... +80
- 1,3 - 6 II2G Ex d mb IIC T5/T6 Gb -40 ... +80 T5 1/2 NPT *6) 0,8 17 20 4601 *8)
II2D Ex e mb IIC T5/T6 Gb -40 ... +70 T6
Ex tb IIIC T130C Db IP66 *3), *10) -40 ... +80
- 1,3 - 6 II2G Ex d mb IIC T5/T6 Gb -40 ... +80 T5 M20 X 1,5 *6) 0,8 17 21 4603 *8)
II2D Ex e mb IIC T5/T6 Gb -40 ... +70 T6
Ex tb IIIC T130C Db IP66 *3), *10) -40 ... +80
Stainless steel 0,8 33 II2G Ex mb d IIC T4/T6 -40 ... +50 T4 M20 X 1,5 *6) 1,2 19 4 4802
II2D Ex mb e II T4/T6 -40 ... +40 T6 *8), *11)
Ex tD A21 IP66 -40 ... +80
T100 *2), *12)
1,3 6 II2G Ex mb d IIC T4/T6 -40 ... +50 T4 M20 X 1,5 *6) 1,2 19 7 4803
II2D Ex mb e II T4/T6 -40 ... +40 T6 *8), *11)
Ex tD A21 IP66 -40 ... +80
T100 *2), *12)
1,4 - 59 - XP/DIP, Div. 1 & 2 -20 ... +60 Flying leads 0,4 18 1 3720
Cl. I, Gr. A-D 450 mm long
Cl. II / III, Gr. E-G
T3 (160C) *4)
NEMA
4, 4X, 6, 6P, 7, 9
Standard voltages 24 V d.c., 230 V a.c., other voltages on request. *8) Suitable for outdoor installation
Design according to VDE 0580, EN 50014/50028. 100% duty cycle. *10) IECEx Certificate of Conformity IECEx KEM 09.0068X
*1) EG-Type-Examination-Certificate KEMA 02 ATEX 1347 X *11) EG-Type-Examination-Certificate PTB 06 ATEX 2054 X
*2) EG-Type-Examination-Certificate KEMA 98 ATEX 4452 X *12) IECEx Certificate of Conformity IECEx PTB 07.0039X
*3) EG-Type-Examination-Certificate PTB 02 ATEX 2085 X Attention: The protection class for coil series 46xx and 48xx is determined by
the choice of cable gland.
*4) CSA-LR 57643-6, FM Approvals
Example: if an ATEX-certified cable gland is used that has Ex d type of protection,
*5) Required connector: type 0570275 the solenoid will have the protection class Ex dmb; if a cable gland with Ex e
*6) Connector cable gland not supplied, see table Accessories type of proteciton is used, the solenoid will have protection class Ex emb.
*7) IP-Protection class according to EN60529
11/12 Our policy is one of continued research and development. We therefore reserve the right to amend,
without notice, the specifications given in this document.
N/en/en 5.4.335.05
97105 NAMUR
3/2, 5/2 and 5/3 way valves, indirect solenoid actuated using low-power pilot system in protection class
Ex ia IIC T4/T6,
seals NBR -40 ... +65C (-40...+149F)
Symbol Ports Actuation Material Operating pressure Flow *6) Weight Dimension Model *1)
1, 3, (5) 2, 4 (bar) (l/min) (kg) No.
4 2 4 2 G 1/4 Flange Solenoid/spring Aluminium 2,5...8 1300 0,45 4 9710509
V 52-
1/4 NPT -Flange Solenoid/spring Aluminium 2,5...8 1300 0,45 4 9710519
5 13 513
*1) When ordering 2please indicate solenoid, voltage and electrical connection, see below
2
*6) Flow characteristics conforms
V 2spe to ISO6358
EM EMR [6 5 bar]
- 2B-EMR
Note for *6): Connecting pipe/fitting: In order to ensure and a pressure collapse avoid the flow, the supply air cross section should with 1/4: 8 mm; with
1/2: 10 mm.
5 With
3 smaller cross section
5 1 3 the inlet (A1) should more largely, however at least equally large line at the port (A2; A1).
N/en/en 5.4.335.06 Our policy is one of continued research and development. We therefore reserve the right to amend,
without notice, the specifications given in this document.
11/12
97105 NAMUR
Accessories
Cable gland Connector
Protection class Ex e, Ex d (ATEX),
Nickel plated brass/
stainless steel
Page 1
Thread Cable Material Protection class (ATEX) Model
M 20x1,5 5,0...8,0 mm Nickel plated brass II2GD Ex e 0588819 0570275
M 20x1,5 10...14 mm Nickel plated brass II2GD Ex d 0588851 0663303 (with rectifier)
1/2-14-NPT 7,5...11,9 mm Nickel plated brass II2GD Ex d 0588925
M 20x1,5 9,0...13 mm Stainless steel 1.4571 (316 Ti) II2GD Ex e 0589385
M 20x1,5 7,0...12 mm Stainless steel 1.4404 (316 L) II2GD Ex d 0589395
M 20x1,5 10...14 mm Stainless steel 1.4404 (316 L) II2GD Ex d 0589387
Adaptor complete Inlet filter Silencer (plastic) *1) Exhaust guard *2) Silencer (stainless steel) *1) Manual override Manual override
(Adaptor, inlet filter and (for start-up only)
seal ring)
Throttle control plate Flange plate, for G1/4 only Yoke Distance plate for coils Mounting plate
90 and 270
11/12 Our policy is one of continued research and development. We therefore reserve the right to amend,
without notice, the specifications given in this document.
N/en/en 5.4.335.07
97105 NAMUR
1 2
5 1 3 5 1 3
95,5
124
71,5
3,5
3,5
4 2 4 2
45
32
45
32
6 15,2 6 15,2
19,7 19,7 1
1
51 24
3 3
~ 106
~ 106
41 22 22
46
4,5
4,5
27,5
27,5
13,5
13,5
5/2 5/2
7
138 61,5
7
6
83,5
105,5
162
3
5 1 3
113,5
89,5
3,5
4 2
45
32
6 15,2
19,7 1
3
~ 106
46
4,5
27,5
13,5
5/2
7
79
6
101
123
175,5
N/en/en 5.4.335.08 Our policy is one of continued research and development. We therefore reserve the right to amend,
without notice, the specifications given in this document.
11/12
97105 NAMUR
Dimensions shown in mm
4 5
Projection/First angle
89,5
89,5
89,5
67
67
13,5
67
4,5
45
27,5
4,5
27,5
27,5
13,5
13,
5/2
7
5/2
5/2
77
35 3 6 2
3
3 6
6 2
2
163
A
140
125
35 24
51 24
2
1,2
4
4 2
45
32
45
32
5 1 3
4,5
74
5 1 3
9
101
25 22 22
41 22 22
4
4
Electrical connection
C C
005
C-C
P ext.
27
P int.
9
10
11/12 Our policy is one of continued research and development. We therefore reserve the right to amend,
without notice, the specifications given in this document.
N/en/en 5.4.335.09
97105 NAMUR
Dimensions shown in mm
6 7
Projection/First angle
32 32 21 3
89,5
61
27,5
40
62
13,5
36
5/2
7
5/2
16
4,5
92 11 6 2
9
4 2 6
M6
2
24 30
70
4 2 45
32
45
3 1 5
74
25 22 22 5 1 3
40 36 40,5
82
128 19
202,5
4
180,5
1 Solenoid optional turnable
2 External control pressure connection G1/8 or 1/8 NPT
3 Port G1/2 or 1/2 NPT
4 Electrical connection 005
6 NAMUR connection plate 3/2 or 5/2 way function
9 Position of gasket internal pilot air
10 Position of gasket external pilot air
11 Port G1/4 or 1/4 NPT
C C
C-C
P ext.
P int.
9
Electrical connection
005
10
27
N/en/en 5.4.335.10 Our policy is one of continued research and development. We therefore reserve the right to amend,
without notice, the specifications given in this document.
11/12
97105 NAMUR
Dimensions shown in mm
8
Projection/First angle
5 1 3
41 22 22
19,5
16
54,5
10
4 2
32
15,2
19,7
49,5 24
~204
107
42
1
40,5
G1/4
92,5
~106
5 1 3
27,5
33
M5
6
7,5
11/12 Our policy is one of continued research and development. We therefore reserve the right to amend,
without notice, the specifications given in this document.
N/en/en 5.4.335.11
97105 NAMUR
Dimensions shown in mm
9
Projection/First angle
5 1 3
61,5 22 22
19,5
16
54,5
10
62,5
4 2
15,2
19,7
70 24
290
42 130,5
107
1 1
40,5
G1/4
~106
92,5
5 1 3
27,5
33
M5
6
7,5
158
4 2 214,5
1 Solenoid turnable
6 NAMUR connection plate 3/2 or 5/2 way function
N/en/en 5.4.335.12 Our policy is one of continued research and development. We therefore reserve the right to amend,
without notice, the specifications given in this document.
11/12
97105 NAMUR
Dimensions shown in mm
Dimensions
Projection/First angle
Solenoid operators
7 86,5 9
53,5 1
49
41
17
40,5
43 82,5
89
M16 x 1,5 12
33
43
28
34
19,5
63,5
27
73
10 2 17
107
70,5 2
40,5
64,5
41,5
91,5
27
53
20
M 20 x 1,5 3 59
42
54,5
56
29 43
122
18 19
68 2
2
1/2 - 14 NPT
41
40,5
45
43
53
84 5
63 2
33,5
56
43
1 Connector 4 x 90 turnable
2 13 (with spacer tube)
26 4 3 M20 x 1,5 or 1/2 - 14 NPT 28 35
4 Flying leads 450 mm long
5 112
M20 x 1,5
11/12 Our policy is one of continued research and development. We therefore reserve the right to amend,
without notice, the specifications given in this document.
N/en/en 5.4.335.13
97105 NAMUR
Circuit diagrams
1 4 5 7
10 11 20 21
2 2
24
40
2 3 2
3
3
3
5
5
5/2 3/2
7 6 7 6
N/en/en 5.4.335.14 Our policy is one of continued research and development. We therefore reserve the right to amend,
without notice, the specifications given in this document.
11/12
97105 NAMUR
25,5
G 1/4
35
19
41
16
11,5
30
16
51
12 12
9,5
34,5
104
5,5
9,5 19
41
5,5 G 1/4
5,5
29
12
19
12
10
5
11
9 27 21
14,5 60
19,5
15,5
2x
65
45
32
12
M5
12
50
41
76 4
5 20
8
25
12
M5
7,5
B B
15,5
15,5
A A
11/12 Our policy is one of continued research and development. We therefore reserve the right to amend,
without notice, the specifications given in this document.
N/en/en 5.4.335.15
97105 NAMUR
Dimensions shown in mm
Projection/First angle
3
12
3
12
12
12
45
58
32
24
12
1 2 24
12
1 2
12
24
26
20
20
50
7
M5 M5
20
24 20 24 9
7
12 12
M5
1 12
2 3
16
16
32
32
55
55
43,5
43,5
3 2
12 1
55 55
Manual override
Model: 0553886 Model: 0553887
14 14
~11 ~11
M10 x 0,5
M10 x 0,5
Model: 0613379
60
M10 x 0,5
17
77
N/en/en 5.4.335.16 Our policy is one of continued research and development. We therefore reserve the right to amend,
without notice, the specifications given in this document.
11/12
97105 NAMUR
Model: M/S2, M/S4, C/S2 & C/S4 Model: 0613422 & 0613423 Projection/First angle
C C
G G
D
B
B G C D Weight (g) Model B Suitable for G C D Weight (g) Model
G1/4 7 35,5 15,5 2,9 M/S2 1/4 G1/4, 1/4 NPT 10 26,5 21 5 0613422
1/4 NPT 7 35,5 15,5 2,9 C/S2 1/2 G1/2, 1/2 NPT 12 33,5 29 11 0613423
G1/2 12 67 23 11,5 M/S4
1/2 NPT 12 67 23 11,5 C/S4
G
C
G1/4
10,5
13
8,5
19
60
21 14,5 8,5
28,5 5
60
11/12 Our policy is one of continued research and development. We therefore reserve the right to amend,
without notice, the specifications given in this document.
N/en/en 5.4.335.17
97105 NAMUR
Dimensions shown in mm
Cable gland
Projection/First angle
C C A B C D Model
B D B D M20 x 1,5 9 36 5 ... 8 22 0588819
M20 x 1,5 6,5 27,5 9 ... 13 22 0589385
M20 x 1,5 14 39 10 ... 14 24 0588851
A
A
1/2-14 NPT 15 58 7,5 ... 11,9 24 0588925
M20 x 1,5 14 39 7 ... 12 24 0589395
0588925 only M20 x 1,5 10 34 10 ... 14 24 0589387
Warning
These products are intended for use in industrial compressed air equipment in the event of such failure.
systems only. Do not use these products where pressures and System designers must provide a warning to end users in the system
temperatures can exceed those listed under Technical features. instructional manual if protection against a failure mode cannot be
adequately provided.
Before using these products with fluids other than those specified,
for non-industrial applications, life-support systems, or other ap- System designers and end users are cautioned to review specific
plications not within published specifications, consult NORGREN. warnings found in instruction sheets packed and shipped with these
Through misuse, age, or malfunction, components used in fluid products.
power systems can fail in various modes. Functional safty according to DIN EN 61508 SIL:
The system designer is warned to consider the failure modes of Suitable for certain applications can only be evaluated through
all component parts used in pneumatic systems and to provide examination of each safety-related overall system with regard to the
adequate safeguards to prevent personal injury or damage to requirements of IEC 61508 / 61511.
N/en/en 5.4.335.18 Our policy is one of continued research and development. We therefore reserve the right to amend,
without notice, the specifications given in this document.
11/12