Documente Academic
Documente Profesional
Documente Cultură
VPLEX
l Introduction............................................................................................................ 2
l Information for Cluster 1......................................................................................... 2
l Information for Cluster 2....................................................................................... 10
l Cluster Witness Configuration Information............................................................19
Introduction
Complete the worksheet prior to starting the VPLEX setup procedure.
This document is a supplement to the VPLEX VS2 Configuration Guide and the VPLEX
VS6 Configuration Guide.
Use this worksheet to collect some or all of the following for each cluster:
l IP (IPv4 only) networking information for:
n VPLEX management interfaces
n EMC secure remote support gateway
l Schedule for metadata backup
l Optional authentication directory service information (LDAP or Active Directory)
l SMTP details to configure call home notifications
l SNMP information for performance statistics
l Certificate Authority (CA) and host certificate information
l Product registration information to initiate your EMC support services
l VPLEX Metro over IP only: A worksheet for IP WAN configuration information
l VPLEX Metro only: A worksheet for Cluster Witness (VPLEX Witness)
configuration information
Note
VPLEX Geo configurations are not supported in Release 5.5 and later.
Note
VPLEX Metro over IP is not supported in Release 6.0 and Patches. Refer to the
release notes for your release to determine if VPLEX Metro over IP is supported fully
for the activity you require.
2 VPLEX
VPLEX Configuration Worksheet
Secure remote support (ESRS) IP address for the ESRS gateway on the
gateway IP network.
dc=security,dc=orgName,dc=company
Name, dc=com
cn=Administrator,
dc=security,dc=orgName,
dc=companyName,dc=com
ou=people,dc=security,dc=orgName,
dc=companyName,dc=com
UNIX attribute names on the directory The following UNIX attribute names must By default, VPLEX maps the following
serverb be retrieved from the directory server for UNIX attributes for OpenLDAP:
mapping:
l posixAccount
l posixAccount l posixGroup
l posixGroup l uid
l uid l uidNumber
l uidNumber l gidNumber
l gidNumber l loginShell
l loginShell l homeDirectory
l homeDirectory
By defaultv VPLEX maps the following
UNIX attributes for Active Directory:
l User
l Group
l msSFU30Name
l msSFU30UidNumber
l msSFU30GidNumber
l msSFU30LoginShell
l msSFU30HomeDirectory
a. Necessary if the connection between the VPLEX management server and the authentication server is going over SSL channel.
b. The VPLEX EZ-Setup utility assigns default UNIX attributes. If the directory server does not contain the UNIX attributes
specified in this table, do not configure the directory service during EZ setup. Instead, use the VPlexcli command
authentication directory-service configure, and include the --custom-attributes option.
4 VPLEX
VPLEX Configuration Worksheet
Note
Note
The remaining information in this table applies only if you specified yes to the previous question.
SMTP IP address of primary connection Address thru which Call Home emails will be sent. Use
your ESRS gateway as the primary connection address.
SMTP IP address for failover connection Failover connections are attempted, in order, when the
(optional) primary and any previous failover attempts have failed.
The connection must go through a different SMTP
SMTP IP address for additional failover
server than the primary connection.
connection (optional)
SMTP IP address for first/only recipient SMTP address through which the first/only recipients
email notifications will be sent.
Call home notification type for first One or more people can receive email notifications when 1, 2, 3, or 4:
recipient events occur.
Second recipients email address Email address of a second person who will receive Call
(optional) Home notifications.
SMTP IP address for second recipient SMTP address through which the second recipients
email notifications will be sent.
Call home notification type for second See description of call home notification type for first 1, 2, 3, or 4:
recipient recipient.
Third recipients email address (optional) Email address of a third person who will receive Call
Home notifications.
SMTP IP address for third recipient SMTP address through which the third recipients email
notifications will be sent.
Call home notification type for third See description of call home notification type for first 1, 2, 3, or 4:
recipient recipient.
Do you want VPLEX to send system Day of week and time to send system reports. Sending (VPLEX specifies a
reports? weekly system reports allows Service to communicate random day and time as
known configuration risks, as well as newly discovered a default)
information that can optimize or reduce risks.
Note
a. The supported statistics are listed in the VPLEX CLI Reference Guide.
6 VPLEX
VPLEX Configuration Worksheet
Table 7 Certificate Authority (CA) and host certificate information for Cluster 1
CA certificate key passphrase VPLEX uses self-signed certificates for ensuring Must be at least eight
secure communication between VPLEX Metro characters (including spaces):
clusters. This passphrase is used during installation
to create the CA certificate necessary for this
secure communication.
Host certificate lifetime How many years the cluster's host certificate Valid values are 1 or 2
should remain valid before expiring. (default):
Host certificate key passphrase This passphrase is used to create the host Must be at least eight
certificates necessary for secure communication characters (including spaces):
between clusters.
Company name
Method used to send call home Method by which the cluster will send call home 1. ESRS
notifications messages.
2. Email
3. None (notifications are
not configured)
Remote support method Method by which the Support Center can access 1. ESRS
the cluster.
2. WebEx
CAUTION
Single-engine 3 6
Dual-engine 5 10
Quad-engine 9 18
8 VPLEX
VPLEX Configuration Worksheet
Attributes for Cluster 1 Port Group 0 Class-C subnet prefix for Port Group 0. The IP
subnet must be different than the one used by
the management servers and different from the
Port Group 1 subnet in Cluster 1.
Subnet mask
Attributes for Cluster 1 Port Group 1 Class-C subnet prefix for Port Group 1. The IP
subnet must be different than the one used by
the management servers and different from the
Port Group 1 subnet in Cluster 2.
Subnet mask
10 VPLEX
VPLEX Configuration Worksheet
Secure remote support (ESRS) IP address for the ESRS gateway on the
gateway IP network.
dc=security,dc=orgName,dc=company
Name, dc=com
cn=Administrator,
dc=security,dc=orgName,
dc=companyName,dc=com
ou=people,dc=security,dc=orgName,
dc=companyName,dc=com
UNIX attribute names on the directory The following UNIX attribute names must By default, VPLEX maps the following
serverb be retrieved from the directory server for UNIX attributes for OpenLDAP:
mapping:
l posixAccount
l posixAccount l posixGroup
l posixGroup l uid
l uid l uidNumber
l uidNumber l gidNumber
l gidNumber l loginShell
l loginShell l homeDirectory
l homeDirectory
By defaultv VPLEX maps the following
UNIX attributes for Active Directory:
l User
l Group
l msSFU30Name
l msSFU30UidNumber
l msSFU30GidNumber
l msSFU30LoginShell
l msSFU30HomeDirectory
a. Necessary if the connection between the VPLEX management server and the authentication server is going over SSL channel.
b. The VPLEX EZ-Setup utility assigns default UNIX attributes. If the directory server does not contain the UNIX attributes
specified in this table, do not configure the directory service during EZ setup. Instead, use the VPlexcli command
authentication directory-service configure, and include the --custom-attributes option.
12 VPLEX
VPLEX Configuration Worksheet
Note
Note
Note
The remaining information in this table applies only if you specified yes to the previous question.
SMTP IP address of primary connection Address thru which Call Home emails will
be sent. Use your ESRS gateway as the
primary connection address.
SMTP IP address for first/only recipient SMTP address through which the first/
only recipients email notifications will be
sent.
Call home notification type for first One or more people can receive email 1, 2, 3, or 4:
recipient notifications when events occur.
SMTP IP address for second recipient SMTP address through which the
second recipients email notifications will
be sent.
Call home notification type for second See description of call home notification 1, 2, 3, or 4:
recipient type for first recipient.
Third recipients email address (optional) Email address of a third person who will
receive Call Home notifications.
SMTP IP address for third recipient SMTP address through which the third
recipients email notifications will be
sent.
Call home notification type for third See description of call home notification 1, 2, 3, or 4:
recipient type for first recipient.
Do you want VPLEX to send system Day of week and time to send system (VPLEX specifies a random day and time
reports? reports. Sending weekly system reports as a default)
allows Service to communicate known
configuration risks, as well as newly
discovered information that can optimize
or reduce risks.
Note
14 VPLEX
VPLEX Configuration Worksheet
a. The supported statistics are listed in the VPLEX CLI Reference Guide.
Table 18 Certificate Authority (CA) and host certificate information for Cluster 2
CA certificate key passphrase VPLEX uses self-signed certificates for Must be at least eight characters
ensuring secure communication between (including spaces):
VPLEX Metro clusters. This passphrase
is used during installation to create the
CA certificate necessary for this secure
communication.
Host certificate lifetime How many years the cluster's host Valid values are 1 or 2 (default):
certificate should remain valid before
expiring.
Host certificate key passphrase This passphrase is used to create the Must be at least eight characters
host certificates necessary for secure (including spaces):
communication between clusters.
Company name
Method used to send call home Method by which the cluster will send 1. ESRS
notifications call home messages.
2. Email
3. None (notifications are not
configured)
CAUTION
Company name
Method used to send call home Method by which the cluster will send 1. ESRS
notifications call home messages.
2. Email
3. None (notifications are not
configured)
16 VPLEX
VPLEX Configuration Worksheet
CAUTION
Table 22 VPLEX Metro over IP only: IP WAN networking information for Cluster 2
Attributes for Cluster 2 Port Group 0 Class-C subnet prefix for Port Group 0.
The IP subnet must be different than the
one used by the management servers
and different from the Port Group 1
subnet in Cluster 2.
Subnet mask
Attributes for Cluster 2 Port Group 1 Class-C subnet prefix for Port Group 1.
The IP subnet must be different than the
one used by the management servers
and different from the Port Group 1
subnet in Cluster 1.
Subnet mask
18 VPLEX
VPLEX Configuration Worksheet
Table 22 VPLEX Metro over IP only: IP WAN networking information for Cluster 2 (continued)
Cluster Witness requires management IP Class-C subnet mask for the ESX server
network to be separate from inter- where Cluster Witness Server guest VM
cluster network is deployed
Cluster Witness functionality requires Any firewall between the Cluster IKE UDP port 500
these protocols to be enabled by the fire Witness Server and the management
walls configured on the management servers need to allow traffic per the
network following protocols and ports.
IP protocol number 51
Dell believes the information in this publication is accurate as of its publication date. The information is subject to change
without notice.
THE INFORMATION IN THIS PUBLICATION IS PROVIDED AS-IS. DELL MAKES NO REPRESENTATIONS OR WARRANTIES
OF ANY KIND WITH RESPECT TO THE INFORMATION IN THIS PUBLICATION, AND SPECIFICALLY DISCLAIMS IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. USE, COPYING, AND DISTRIBUTION OF
ANY DELL SOFTWARE DESCRIBED IN THIS PUBLICATION REQUIRES AN APPLICABLE SOFTWARE LICENSE.
Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be the property of their
respective owners. Published in the USA.
20 VPLEX